Michael, thank you thank you THANK YOU. I have had my saw for 20+ years and it never cut straight. I spent days fiddling with it years ago and came to the conclusion it was just how it was. It never made sense to me. It is a mechanical system. If the wheels are true, then the blade HAS to cut straight! You know what it was. The table mounts. For the first time EVER, my saw cuts as it was designed. I can't believe the number of people that have elaborate processes to adjust your work to a misadjusted table. Again, thank you. This bothered me every single time I used the saw and hence, I didn't use it very often. I feel like I just got a new tool!

In all these years I've owned and used a band saw, I never realized you could adjust the table alignment to the blade! Thank you FWW for this video.

Great tutorial. I especially like the fact you pointed out about using the Miter gauge and slot. I am going to try and write this up so that I can print it out and keep it with my saw for future reference/generations.

I am a beginner with wood working and enjoy milling my own boards from small logs. This makes so much more sense than adjusting your fence for drift. I will do this first thing tomorrow. It will make my current project and future projects so much easier. Thanks a million!

I've been in class with Michael fortune and Marc Adams woodworking School in Indianapolis. Excellent instructor very knowledgeable in all aspects of fine woodworking. This video on setting up a bandsaw is the only one you need

I have been struggling with an old bandsaw I bought from my father 6 years ago, and have tried all the “tricks” I have seen online. Nothing seemed to “Fix” the drift. Until NOW. Thank you for a very informative video. My saw now cuts straight and true. DC

I've been suffering for month to get a straight cut, so this is the salvation. Bless this master for sharing the knowledge.

This should be the 1st video every bandsaw owner watches to get started! Very good info and I had mine running like a charm in no time.

Extremely well explained and demonstrated. Some of the best advice for setting up a bandsaw I've seen. I'm glad I stumbled into this video .... Cheers!!

PROBLEM SOLVED !!!! Thank you for making this video.... such a commonsense thing to do that wasn't even on my radar with a bandsaw. I had always been told to set my blade gullet on the centerline... I know have it set per your instruction and my cuts have been spot on with no drift or wander. You are much appreciated !!

Thank you for such a simple and clear guide to set up my bandsaw, now it is running really well! 👌

that table adjustment tip is something I never heard of, good info! thnx

I messed up my bandsaw (dumb mistake) and was having a hard time getting it to cut properly again. Watched a lot of videos and this one enabled me to solve all the problems. Thanks very much!

I just bought a used Jet 14" bandsaw that I am having to set up as if it were new out of the box. EVERYTHING is out of alignment. No wonder the fellow sold it! This video deals with an issue I have not seen anywhere else. Thank you so very much!

My first job this weekend, thank you so much!

WOW! What a terrific video and absolutely dead-on as to what I needed. Yep, I've been my bandsaw as described, not realizing the problem which might arise. Thank you for your expertise!

I have had nothing but frustration trying to re-saw with my bandsaw for years. I had tried every other solution I watched on KZfaq . This, my friend, absolutely solved my problem. I can't thank you enough for this solution . It works like a charm now.

Thank you very much for your great tip on tuning my purchased used DW876, I had to disassemble it entirely for a complete overhaul and now that it is like new I have tuned it following your advice. Best regards, take care of yourself and long live your chain !!! Alain from Switzerland

Thanks for the help. I’ve been trying to dial mine in and failing for a month. I’ll shake you hand and thank you Sir. I appreciate the schooling you just gave me. And will use it from now on.

Michael, brilliant video made a lot of sense to me I've been struggling with mine for a few days now so I tested out your method I would just like to say you are a wizard thank you, John

Thanks. Someone else’s video suggested having the back of the blade gullet ride the center of the tire, but after watching your explanation I can now understand why the work piece was drifting to one side. Time to go make some adjustments and see how it goes.

Excellent information! I had not seen this solution explained anywhere before! Thank you!!!

Watched this video yesterday before re-sawing some nice 2" x 5" hard maple that I plan to use for a furniture project and am I ever glad I did!!! I started cutting and within the first two inches, the blade drifted 1/4" away from the fence. By the way, this is a new saw that I had only cut a couple of pieces on until now. So, I backed it out and set the blade back to the center of the upper wheel as you said. I tried a sacrificial piece and couldn't believe the difference. Started over (after a few corrective moves...) and the saw ran straight and true for the remaining 8 feet of maple. Then I did the second piece and achieved the same results. Thanks so much for a great tip, I'm already passing it on to other woodworkers that I know!!!

As a novice, [at 74] with a bandsaw, this is most educational, and helpful. Thank you.

Very good instructions. A good teacher speaks slowly with only the words needed to convey one’s information. Only a handful of good teachers out there. At least on KZfaq. Much appreciated lesson. Fortunately my issue today was only realigning my fence with the mitre slot.

Michael Fortune is a master. Years ago I read an article by him in Fine Woodworking explaining how to set up a bandsaw. I hated my bandsaw until I followed his suggestions in the article. My saw has worked perfectly for years. I love to use it. The blade he uses most is a 1/2" skip toothed 3" T.P. I. Thank you Michael.

In addition to getting the blade exactly centered on the upper wheel, I have found that tightening the tension until the blade when plucked makes a musical note also helps to get a straight cut. I have resawed maple to 1/16 using these two things and a homemade resaw fence (clamped to the table like that guy from Ft Bragg describes in his book). I never use the fence guides on the table.

Great information, I’ve watched six others correct for drift, no one came close to this perfect setup video! Well done!

Thanks Michael I’ve been trying to fix this exact problem for weeks thank you for sharing you expertises 😊

Had my ssw since about 2005 and never understood that this was how you square up the cuts. Going to do this today!

This is the best video that I have found on fixing band saw blade drift. Other videos have you adjust the fence to correct for drift. But this is a symptom of the problem. The cause is really the table misalignment to the blade.

Thanks Michael. Never had such a clear explanation and nobody seems to talk about table alignment. Merry Christmas.

Great info Michael, I'm looking forward to finally solving the drift problem with my new Laguna 14/12 saw.

Best explanation ever! And the first guy not playing with saw band guidance only! Thanks and greets from Germany 👍 But excuse me, I have to go to my workshop now, checking my table angle 😊

Thanks, Michael and FWW. This is a great video. Owners of a SHOPSMITH bandsaw need to be aware that their saw is unique in that there is no adjustment for blade tracking. The saw is designed so that every blade runs near the back of the wheel and against a pair of "Auto-Track" bearings that are in the arm of the saw. Likewise, the backup bearings below and above the table aren't adjustable forward and back because they don't need to be; all blades run to the back and against the bottom bearing, and if the saw is properly aligned, just ahead of the upper bearing. It's pretty sweet, actually. Scott

Every owner of a bandsaw needs to watch this. Thanks Michael 👍

Thanks. You have just cured my bandsaw faults!! But as it happens, it was an education to deal with it as it was as now I am expert at guiding the wood by hand! Time to get lazy again. Thanks, a really helpful video.

Thank you for the exceptionally informative video. I’ve learned a whole lot!

I have the piece drifting away from the fence. Now thanks to you, I can address this issue. Thanks

Great instructional video & most appreciated. Just bought a new small Porter Cable & I saw on its reviews to watch your video. Certainly glad I did. Nothing like a professional with years of experience educating us lesser knowledgeable in the proper set up rather than bashing the equipment. Subscribed, hope to learn to become a friend of wood rather than what I've suffered with through the years. Thank you!

This was an amazingly useful and informative video, thanks so much for putting this together!

Thank you, this is exactly what my bandsaw is doing, this video was very helpful.

Thank you! My bandsaw turned over and I have not been able to use it since cause of the drift. I never knew why till now. Saved me from tossing it. Again, THANK YOU!

I had read somewhere that the blade itself can cause the cut to be off. When the blade is made the set of the teeth are not perfectly symmetrical from right/left. Whichever tooth is further out from center will be the way the cut will pull. It made sense to me and I simply left it at that. Too align the blade you would draw a straight line on a board from end to end and have one jointed edge. Freehand the cut until you could cut without adjusting. Stop the saw and draw a reference line on the table with the jointed edge. Then you would use this line to measure from to clamp a fence. I am going to try this method. This sounds good and makes perfect sense. Thank you for sharing this.

Thank you for the great explanations. I will never again turn the bandsaw around using those convenient handles, lol. I also like having the bandsaw blade length on the top wheel door and the Allen key held handy with the magnet on the back. You made a subscriber out of me. Thanks again for taking the time to share this information.

I took a band saw class with Michael as the instructor very nice person and a master woodworker

I just did the adjustment and got a straight rip cut using the fence that was about as good as my table saw! Thank you!

I'm out to the shop now to check and if need be, adjust the bandsaw tables, thank you for such valuable information!

I just bought a Shop Fox a few weeks ago. So glad this came up in my list of videos.

A search brought me here. Thanks Michael. The Rikon now resaws straight. No more cutting wedges. Great video. JimE

Thank you so much for the help. This has been a problem for years.

This is the clearest and easiest I've seen/heard it done, Thanks Michael.

Thanks for the great info. I had never thought of aligning the table to the cut.

Thank you , thank you. I have taken the time to align everything on the bandsaw, but it was still not cutting straight. This is really good information. I have ordered a carbide teeth blade, since the teeth are larger than the blade, it also helps this issue.

Excellent tutorial, thank you for going to the trouble of making it.

Thanks for a great and very informative Video. I really like the way you teach!

Mr. Fortune, I centered my blade like you said, clamped a temporary fence parallel to the miter slot and cut straight halfway through a board. I flipped it end over end and cut from the other side and you can hardly tell where they met. My table was already correct but my blades were always centered over the gullet. Thank you so much.

Thank you for this video. Saw is running great now, plus I forms my 10mm socket!

Thanks Michael. Just picked up a saw. Will be able to track it now.

I have been having tracking issues with my small band saw, and thought it was the quality of the saw or maybe a blade adjustment, or even cheap blades. But never thought of how out of square the table is to the actual blade itself. I'll check on that next. Thank you.

A great common sense approach, where you have identified and fixed the actual problem. Thank you.

That looks like a Rigid BS14000 as I own. My fence is different though. I really want to thank you for your excellent presentation as even I can understand it.

This was explained better than anyone else. Thanks 🙏 for the info.

A LOT of useful information I did not know! Thank you

My new bandsaw drifts like crazy so I head to youtube for help. 10+ videos later, all showing different and conflicting methods, I'm no wiser. I'll try each setup in turn and hope for the best.

This was a very clear and informative video. This newbie thanks you

Thank you very much for this simple and clear explanation!

Great video, thanks for the info, I need to do this to my brand new bandsaw.

Superb tutorial, Thanks. I need to do this to an old Dewalt bandsaw I have in my garage.

Excellent video. Very clearly explained. Thank you !

Great video. U might have just solved my problem with my extremely cheap tiny band saw. Thanks

Thank you Sir, for this Brilliant explanation. I spent a lot of money on an new bandsaw, because the previous one was giving me an hard time on thicker wood, but I was going crazy, because of the shifting of the blade, to the point that i was not using it anymore. Now i can split 12x12 cm wood like it was done on the table saw!! Thanks again for sharing your precious experience with us.

I just realized why my bandsaw is cutting crooked. Thanks so much for your video, it is most helpful!

Really useful, I had no idea that was the problem. I shall go out to my shed today! Thanks!

great info, i was having this issue. going to try to fix it tomorrow!

Excellent video. I had no idea that could happen and how to fix it. Thank you.

Great tips for adjusting the bandsaw, ive had issues and most likely because i grsb the table to move the bandsaw around, ill check it next time i use it Thanks Rob

Excellent video and process. Thank you for sharing...

Good intel!!! My old Delta 14 probably needs this attention!!!

Thanks for the detailed explanation of drift.

Wow, I see everyone else telling me to just reposition the fence, which is just ignoring the issue and now you're saying to position the base, which is the real issue. Thank you for this. What model saw is that? It looks just like mine from the back.

Thanks so much for the video - I've got my ol' faithful ship-shape and in good order once again.

So excellent is your instruction-I salute you sir.

Great video, thank you very much! After years of trying to fix this…. Now I know why the piece I’m cutting will not stay against the fence!

so clear and useful - thank you.

Méritos a longa experiência e ao ensinamento. Parabéns

I don't yet have a bandsaw but plan on getting in inexpensive one just to get started. (my father had one that I loved to use). I've wondered about aligning the fence , that along made me go duh. awesome.

Thanks for sharing

Very nicely explained with good camera work.

Mr Fortune, Thank you for your very clear explanation of the long-standing problem I've had with my bandsaw and how to properly cure it. I can't wait to get going. Thanks again.

Great explanation!

thank YOU very much for this exzelent explenation !!! kinde regards from Switzerland !!!

Nicely explained.

I have never ever heard of adjusting the table! thank you!

Brilliant explanation and thorough. Thanks When is your next lesson. Well done FWW. Keep it up

Finally! A guy that also realizes having the guides close to the work will help with drift! AND, it's a huge help in the safety department! Having been a toolmaker for 40+ years, always taught to set the upper guide within 1/8 of an inch above the workpiece. If you think about that, that won't allow room for your finger to get through there. It also helps keep that blade straight! So many bandsaw videos I watch, invariably they have the upper guide like 2 inches above the work... bad choice....

The best bandsaw guidance I have ever heard. Your advice solved years of recurring problems. I now live by this advice!

You have solved my problem that no one could help with. Thank you

Aligning the table was so easy and produced such a dramatic improvement. No drift! The miter slot is now useful and I don't have to waste time and wood cutting 2" inch x 30" sticks down the middle to adjust the fence for drift everytime I change blades. Thank you! I can't understand why the owers manual for my Delta 14" bandsaw did not include your instructions. Duh!

Wow! I have a bandsaw but never knew any of this. Good video