How to Emboss and Deboss with Your Cricut Maker

Рет қаралды 399,392

2 жыл бұрын

You can easily emboss and deboss on your Cricut Maker with the debossing tool, and the process is very similar! With just a few small steps you can emboss in a jiffy!
What you use for your stencil also affects your end result, and its important to know that if you want a sharper emboss or deboss, you may need to change that product!
I do show you in this video what the effects are from using both cardstock which is around 130gsm, and a much thicker card that is around 300gsm, so make sure to check out the entire video!
Materials used:
Kraft board: amzn.to/40km3U5
Metallic paper: amzn.to/41lcWEk
Cricut Maker 3: amzn.to/3KKVbak
Quick Swap housing with debossing tip: amzn.to/41w3nBW
Brayer: amzn.to/3KQvkiu
Standard grip cutting mat: amzn.to/3o7RtQt
This channel is the best place to learn many different types of Cricut Crafts. Kelly Rossouw is dedicated to making the best Cricut tutorials for you, helping you to live an easier creative Cricut life.
Get a Free month with Creative Fabrica & an Annual subscription for $4.99/mo:
kellyrossouw.com/CreativeFabrica
Ways to support & help sustain the channel:
Subscribe for free to my newsletter list: kellyrossouw.ck.page/newsletter
Once off - Buy me a coffee: www.buymeacoffee.com/KellyRos...
Get monthly access to various perks like livestreams and behind the scenes videos:
KZfaq Channel Membership: / @kellyrossouw
Thank you SO much in advance - I cannot express how much I appreciate your support!
#cricut #cricutsa #cricutmea
I try post as much content as I can on Social Media, so please follow me there!
/ kelly.rossouw
/ kellyrossouwza
*Please note that I may earn a small commission from products bought through Affiliate programs, this in no way affects the price you pay. Channel by Kelly Rossouw

Пікірлер: 403

@KellyRossouw 10 ай бұрын

Check out some more Cricut Embossing tutorials here: kzfaq.info/sun/PLkpaKJi6XJQKxyGZ31ojyNI1HDEwtDhx6&si=tU1KPBgmXLzV-gKr

@ChyinaPowell Жыл бұрын

I really appreciate how simple your tutorials are. Plus the fact that you hop right in and don't give us 25 minutes of filler. Great video!

@KellyRossouw Жыл бұрын

I appreciate that!

@KdogBites 9 ай бұрын

Same for me!@@KellyRossouw

@relicbane 3 ай бұрын

@@KellyRossouwyou need to publish a tutorial for how we can give you more than 1 like per video. Brilliant stuff. Thank you!

@AJTivol Жыл бұрын

Wow! That's a fantastic result. Thank you so much. I have a project that I've had in mind for a couple of years and this is just what I needed to know.

@KellyRossouw Жыл бұрын

Glad it was helpful! Good luck!!

@productivityseventeen6127 Жыл бұрын

thank for such a comprehensive and clear tutorial on deboss and emboss! appreciate you sharing your testing results.

@KellyRossouw Жыл бұрын

You are so welcome!

@debvesper9147 Жыл бұрын

You're amazing! I've watched a lot of videos on this. I've also read up on it many times. I could never figure it out! But you have explained it and shown it beautifully! Thank you so much!

@KellyRossouw Жыл бұрын

Ah thank you so much! So glad it helped

@cindymcgarrahan1001 9 ай бұрын

First time watching one of your videos - it won't be be the last. You make it so simple and direct. I hate watching long videos that just use fillers. Thank you.

@KellyRossouw 9 ай бұрын

You are so so welcome! Welcome to the channel 💚💚 And thank you so much!

@amicarobinson7819 Жыл бұрын

Thank you for this amazing tutorial! 🎉 bought my maker today & deboss/embossing is the first thing I want to tackle! 😍

@KellyRossouw Жыл бұрын

You are so welcome! Good luck!

@robertapalmer3599 Жыл бұрын

This by far is the best tutorial on embossing and debossing I have seen! Easy to understand. Very step by step. I have definitely subscribed to this channel!

@KellyRossouw Жыл бұрын

Thank you so much 🥰 very much appreciated!

@thaabitmollagee4238 2 жыл бұрын

Thanks for this. Just got my machine today and tested this method. Came out great!

@KellyRossouw 2 жыл бұрын

oh fantastic!! Well done 😍

@bijouxw1014 Жыл бұрын

Kelly, Your tutorial is really great. Enjoy learning from you.

@KellyRossouw Жыл бұрын

Thanks so much!

@salwahlane9361 2 жыл бұрын

Ohhh so glad I found this video of yours! I've been wanting an embossing machine but don't need the die bits as have a Cricut Maker. I have used the deboss tool a bit but using it to EMBOSS like you show, looks fabulous. Just have to test it... back soon!! SUCCESS!!! I used MAKE A WISH and it turned out great. thank you!

@KellyRossouw 2 жыл бұрын

oh that's amazing! I'm so glad you had success! Well done!! 😍

@donnamiller9578 7 ай бұрын

Love this information. I have been wanting to find a way to emboss with the Cricut & you have taught me the way. Thank You!

@KellyRossouw 7 ай бұрын

You are so welcome!

@bijouxw1014 Жыл бұрын

I am waiting for my Cricut Maker 3 to arrive & want to learn from you. I am so happy I found your tutorials..

@KellyRossouw Жыл бұрын

How exciting!!! Thanks

@suzystar49 2 жыл бұрын

Thank you thank you. I did it. I've been debating on buying an embossing machine. You have saved me some money,

@KellyRossouw 2 жыл бұрын

Glad I could help!

@SABan-bh4hi 2 жыл бұрын

Curious Metallics is the name of a line of paper and cardstock made by Arjowiggins!

@KellyRossouw 2 жыл бұрын

Thanks for sharing! Would love to know how they got the name 😂

@lisak3159 7 ай бұрын

Thanks for this. Brilliant. I've used foam sheet backer to get deeper deboss but I like the emboss much better

@KellyRossouw 7 ай бұрын

Glad it was helpful!

@nanceecole9015 2 жыл бұрын

Your video was amazing. I watched an “embossing” video when I first got my Maker and it seriously scared me off (for two years!). Watching your video has given me the confidence I needed to try embossing again. I’m now a subscriber!

@KellyRossouw 2 жыл бұрын

Awww thank you so much Nancee! Really appreciate it 🙏 good luck!

@bubblegirl6265 8 ай бұрын

You explain things so clearly! Thank you. 😊

@KellyRossouw 8 ай бұрын

You're so welcome!

@gailivers6855 3 ай бұрын

Love this video! I just purchased my second Cricut machine a Maker 3 because I wanted to do embossing, You made this SO easy to understand ! Thanks so much !

@KellyRossouw 3 ай бұрын

You are so welcome! Hope your projects come out super super well!!

@dianeday7995 11 ай бұрын

Great video explaining in detail debossing and embossing. Thanks!

@KellyRossouw 11 ай бұрын

You're very welcome!

@ab_8893 2 жыл бұрын

I'm a new cricut owner and I love your videos!!

@KellyRossouw 2 жыл бұрын

Thank you so much, and welcome!

@BarbaraRogers65 11 ай бұрын

Thank you for this video. I have had my cricut for over 3 years and never tried embossing/debossing. You explained this so clearly and easy to understand. Thank you. I finally did my 1st embossing because you gave me confidence to do it.

@KellyRossouw 11 ай бұрын

Glad it was helpful! Well done on your project 🤩

@Michisux 2 жыл бұрын

This is the exact video I’ve been looking for, thank you!!

@KellyRossouw 2 жыл бұрын

You are so welcome!

@aimeehartcher5860 Жыл бұрын

I'm doing a happy dance. First time using the Deboss tool and it worked amazingly! Thankyou :)

@KellyRossouw Жыл бұрын

heck yes! You did all the hard work - well done!

@BibelzitateropLetzebuergesch 8 ай бұрын

Thank you so much for your tutorial! The result looks awesome!! 😮❤

@KellyRossouw 8 ай бұрын

You are so welcome!

@UYDesigns 2 жыл бұрын

Wow I had no idea cricut could do this! Thank you for sharing!!

@KellyRossouw 2 жыл бұрын

Happy to help!

@julianas.7566 Жыл бұрын

GREAT video, exactly what I was looking for. Thank you very much

@KellyRossouw Жыл бұрын

Ah awesome! Happy to help 😊

@stephanietm9960 Жыл бұрын

I appreciate your videos. I always learn so much from you! Have a happy day!!!

@KellyRossouw Жыл бұрын

Thank you! You too!

@realgeorgehere7123 5 ай бұрын

This video was great. I really enjoyed watching a crafty showing her Black belt 🥋 . you earned my subscription

@KellyRossouw 5 ай бұрын

aww thank you so much!

@mamaita17 2 жыл бұрын

Awesome! Super informative. Thank you

@KellyRossouw 2 жыл бұрын

Glad it was helpful!

@lindaheuer677 4 ай бұрын

So excited to learn this technique. I am going to use it on my daughter's wedding invitations? Amazing tutorial! Thank you.

@KellyRossouw 4 ай бұрын

Wonderful! That is such a perfect application of this technique! Hope you have an absolute blast x

@user-bn2fd7jc9u 5 ай бұрын

wonderful explanation and tutorial- thanks so much!!

@KellyRossouw 5 ай бұрын

Glad it was helpful! Thank you 💚

@mariawinters1947 2 жыл бұрын

Wauw thank you so much I missed the embossing of my silhouette machine but this solution is great.

@KellyRossouw 2 жыл бұрын

You are so welcome! I missed it too :( glad that I can do it on my Cricut though 🤭

@corigodfrey1178 2 жыл бұрын

That was the best video I have seen! Thanks so much for sharing!!

@KellyRossouw 2 жыл бұрын

Aw thank you so much Cori!! You are so kind

@marilynlegaspi4412 2 жыл бұрын

Oh my god thank you for explaining❤️. I’m going to do wedding invitation card so this really help. I’m going to buy the embossing tip asap🤙

@KellyRossouw 2 жыл бұрын

yaaaay! Thats the perfect excuse to use the debossing tip! Wish I had a Cricut when I got married hehe

@bassambouhamad7935 Жыл бұрын

Thank you so much for your beautiful information, I love your video.

@KellyRossouw Жыл бұрын

You are so welcome! It is the Cricut Maker 3 :)

@samanthamartinez8801 2 жыл бұрын

You just gave me great ideas with this video, so thank you 😁

@KellyRossouw 2 жыл бұрын

I'm so glad!

@KnicolewithaK 2 жыл бұрын

THANK YOU!Best tutorial on here.

@KellyRossouw 2 жыл бұрын

Aw Thank you so much! So glad it helped 💙

@elizabethvallely4044 9 ай бұрын

Thank you so much for this tutorial was very helpful!!! Liz ☺

@KellyRossouw 9 ай бұрын

You are so welcome!

@jeancopelin642 7 ай бұрын

Thank you I just received my embossing tool for my cricut maker3 and sat and watch your video and did my first embossing, its not perfect but i will try and improve on my first attempt :)

@KellyRossouw 7 ай бұрын

Wonderful! Thats all we should ever do! Keep trying and improving! Well done!

@MisterKallo 4 ай бұрын

Amazing tutorial. Thank you!

@KellyRossouw 4 ай бұрын

You're very welcome! Hope your project is a super success!

@margokraus6371 4 ай бұрын

Love it! Thanks for such a wonderful video!

@KellyRossouw 4 ай бұрын

Glad you enjoyed it!

@pertinasmith8183 Ай бұрын

I never heard of either and super glad you made this video 😊

@KellyRossouw Ай бұрын

I'm so glad! It is so much fun to use!

@magscj123 2 жыл бұрын

Awesome thx Kelly, great tip

@KellyRossouw 2 жыл бұрын

You're so welcome! 💙

@audreyhollatz5690 6 ай бұрын

thank you for your easy to follow, great video!

@KellyRossouw 6 ай бұрын

You are so welcome!

@bethmegansmith4642 2 жыл бұрын

Thank you Mega Cleaver 🤗

@KellyRossouw 2 жыл бұрын

haha thanks so much

@gesilaferreira7261 2 жыл бұрын

Stunning! Have to try this, but think I need to watch the tutorial a few times again...🙈

@KellyRossouw 2 жыл бұрын

You are most welcome! Yesss! Thats exactly what I do too 😁

@visualsweets 2 жыл бұрын

Such useful info. Thank you.

@KellyRossouw 2 жыл бұрын

You are so welcome!

@giselleazpurua203 2 ай бұрын

You're a genius!! loved this!

@KellyRossouw 2 ай бұрын

Thank you so much! 🥰

@bethmegansmith4642 Жыл бұрын

Had to watch this again . I got aa cricit Maker coming to me on the 9th August . I got it new from ebau UK it is Champagne color . I am really excited. Happy Clacking xxxxxx

@KellyRossouw Жыл бұрын

ooooh that is very exciting!! Have so much fun!!

@bethmegansmith4642 Жыл бұрын

🥰@@KellyRossouw

@Jaquelinewieser 8 ай бұрын

Thanks for share, I love the proyect ❤😊

@KellyRossouw 8 ай бұрын

You are so welcome!

@MikeTees 2 жыл бұрын

_Thank you_ , for sharing been thinking about the , the new *_Cricut_* auto press as well as the hat press , *_Awesome_* video Continue to be Great and" Break the sky with your *_Creativity!_* 💯🗣🔥

@KellyRossouw 2 жыл бұрын

You are so welcome! I cannot wait until they are available in my country - I will definitely do videos on them for sure! 😍

@chicagogirl8173 2 жыл бұрын

This is fantastic!! Thank you :)

@KellyRossouw 2 жыл бұрын

You're so welcome!

@elizabethvallely4044 Жыл бұрын

Thank you for this tutorial! just brought the embossing tool a week ago, was looking to fine a tutorial con embossing came a cross your channel glad I did! Thank you for sharing! Just Subscribed to your channel...

@KellyRossouw Жыл бұрын

You are so welcome! thank you for the support!

@elizabethvallely4044 Жыл бұрын

@@KellyRossouw You're very welcome!❤

@zina6581 Жыл бұрын

Great information! Thank you!

@KellyRossouw Жыл бұрын

You are so welcome!

@rondasheive4280 2 жыл бұрын

Thank you great video on this.

@KellyRossouw 2 жыл бұрын

Glad it was helpful!

@yukipanda5535 2 жыл бұрын

That looks great thanks for the tip! :)

@KellyRossouw 2 жыл бұрын

You are most welcome!

@ruthmiddleton2829 Ай бұрын

Watched this last night and was hooked I had to try it. Went to a Cricut social day today and did this technique. Unfortunately my 165gsm was not good quality and it ended up with holes. I then used my American Crafts cardstock. This worked OK but as you said the thicker the cardstock the less sharp, so I debossed it a second time and was thrilled with the result. Thank you so much.

@KellyRossouw Ай бұрын

oh thats so exciting! Glad you came right, well done!!

@julietekell4057 Жыл бұрын

Such a great video!!!

@KellyRossouw Жыл бұрын

Thank you!!

@msadoc 2 күн бұрын

Very good video, thanks for sharing

@KellyRossouw Күн бұрын

Thank you so much!! I appreciate it a lot 💚

@dreakie 2 жыл бұрын

Omg!!! So amazing!!!

@KellyRossouw 2 жыл бұрын

hehe thank youuu :D I love it 😍

@michaelcarpenter6242 Жыл бұрын

Wonderful! Thank you.

@KellyRossouw Жыл бұрын

You are so welcome!

@Fernanda_85 11 ай бұрын

Wowww muchas gracias!!! 😍

@KellyRossouw 11 ай бұрын

Eres muy bienvenida!

@patriciacroteau2063 2 жыл бұрын

great video, thx

@KellyRossouw 2 жыл бұрын

Glad you liked it!

@user-ng6co6wg3d Жыл бұрын

Gorgeous 😍

@KellyRossouw Жыл бұрын

Thank you! 😊

@julietekell1548 Жыл бұрын

Brilliant!!!

@KellyRossouw Жыл бұрын

Thank you so much!

@debi6511 Жыл бұрын

I’m going to try this! I’ve had the debossing tool for a while and have been afraid to try it!

@KellyRossouw Жыл бұрын

Ohh please do! Its so much fun :)

@nikishakingdesignhouse1036 11 күн бұрын

You're the best!

@KellyRossouw 10 күн бұрын

Ah thank you so much! 😍

@abysss56 2 жыл бұрын

Great ideas!

@KellyRossouw 2 жыл бұрын

Glad you think so!

@simplefragments 9 ай бұрын

Thank you for this tutorial. It is super helpful. I was wondering if you knew how to add color to the embossing. So for example, if I just wanted to add color to the raised text vs. leaving it the same color as the paper

@KellyRossouw 9 ай бұрын

You can cut another layer as the stencil and lie it on top perhaps? Its not often something I do

@ellen-marie6692 Жыл бұрын

Thank you! It’s a bit intimidating but I suspect it’s due to my still somewhat limited experience with my Cricut.

@KellyRossouw Жыл бұрын

You are so welcome! Im sure you will be a bit more comfortable with it soon :) Give it time and practise!

@CockatooWantsToBeaCat 2 жыл бұрын

Thanks, I was wondering how to do this. I've tried and failed and almost gave up. I just subscribed!

@KellyRossouw 2 жыл бұрын

Thanks for the sub! 😍

@drenie1 2 жыл бұрын

fabulous video and tutorial! to answer your question Curious Paper Metallics is a paper company and the "metal" is the finish of the paper that looks metallic but doesn't have actual metal in it. I love this paper line. beautiful stuff!

@KellyRossouw 2 жыл бұрын

Thank you so much! And thanks for sharing 💙

@kathiespecht4359 Жыл бұрын

@@KellyRossouw Do you know what weight of the curious paper metallics you used. I've found it in many different weights. Thanks. Enjoyed your video.

@TheTomar33 Күн бұрын

Nice

@janesuh1316 8 ай бұрын

What a brilliant tip on embossing and debossing! Thank you so much for sharing! I tried the deboss tool for the first time yesterday and was frustrated with results. Your tutorial makes so much sense and I am looking forward to watching more of your videos.

@KellyRossouw 8 ай бұрын

Glad it was helpful! Thanks so much as well! Very much appreciated 💚

@justanaussie7094 Жыл бұрын

I've been wondering if you needed templates for embossing/where to find them so your video answered that question for me thankyou.

@KellyRossouw Жыл бұрын

Glad I could help!

@caroltinnie5387 Жыл бұрын

Thanks so much for this! I subscribed to your channel and look forward to learning a lot from you. Do you happen to have a cheat sheet for this tutorial? Thanks!

@KellyRossouw Жыл бұрын

Welcome! I dont have a cheat sheet unfortunately :(

@bufah101 2 жыл бұрын

Great video! How about making a stencil out of kraftboard that is mirrored? So doing it all from the back side, if you understand what I mean? Or is it even possible to do it in the Cricut software? (The 2 step, with just step 2 as you already have the stencil after the first time). Love your style by the way! This channel will definetly gain popularity soon!

@KellyRossouw 2 жыл бұрын

Thank you so much

@maferilla Жыл бұрын

hi! it looks so good! I was just wondering if you have a video with embossing something a image pattern into something? I am having trouble translating embossing the writing into embossing a pattern of images

@KellyRossouw Жыл бұрын

It is something I am working on, so hopefully will be able to do a video on it soon!

@bikrgran 9 ай бұрын

That's COOL!

@bikrgran 9 ай бұрын

Just to clarify, in my mind, you are using the cut design to give the debossing tool a "ledge" to make the card more pronounced? Does that make any sense? 😆

@KellyRossouw 9 ай бұрын

Thanks so much! Yes that is exactly what I do! And because I use a thicker harder board as the stencil for the ledge - the result is THAT much better!

@bikrgran 9 ай бұрын

@@KellyRossouw awesome! Thanks!

@SewPerky 9 ай бұрын

Have you ever done this method on cork fabric? If so, I would like to watch!

@KellyRossouw 9 ай бұрын

I havent unfortunately :(

@francesmoses6894 Жыл бұрын

Your hair is amazing

@KellyRossouw Жыл бұрын

Thank you so much! :)

@julietekell4057 Жыл бұрын

Thank you for your wonderful tutorials! I wanted to ask your opinion…do you think it’s possible to emboss/deboss on parchment paper? So far, my attempts have been unsuccessful.

@KellyRossouw Жыл бұрын

You are so welcome! I havent tried, but perhaps because it is a paper with thicker fibers you might need a different approach. Are you using kraft board as a stencil?

@cindysouthall1722 2 жыл бұрын

Thank you so much for making this video. I have tried to do the embossing as per your instructions on two occasions. The first time I cut medium cardstock on the mat and used medium cardstock for the embossing. The second time I cut poster board on the mat and used medium cardstock for the embossing. On both attempts, there were two small tears from the embossing tip on the embossed paper. Do you have any idea what I did wrong? Thankyou for all your helpful information.

@KellyRossouw 2 жыл бұрын

You are so welcome!

@cindysouthall1722 2 жыл бұрын

@@KellyRossouw Thanks for your reply. You were right. I changed the settings to less pressure and that fixed the problem. It turned out beautifully.

@surgicaltechcrafter2169 2 жыл бұрын

Fabulous. Thank you

@KellyRossouw 2 жыл бұрын

You are so welcome!

@FR3DER1Cx Ай бұрын

Hey, great video! I’m very new to arts and crafts in general but love the results you’ve shown off. Why do you cut out the design first and place a new sheet on top, is that necessary for the em-/debossing process?

@KellyRossouw Ай бұрын

Thank you! The cut out design makes the "stencil" layer which creates the dimension in the method I use in my video :)

@shannonpadilla4120 Жыл бұрын

Thank you for the tutorial! Do you know if there is any way I can deboss and print ink on the same areas? I'm completely knew to the Cricut and trying to print my poetry on cardstock!

@KellyRossouw Жыл бұрын

Hi Shannon! This would be quite an advanced process and lining this up could be quite challenging. Its not something I have ever tried, but I do believe it is possible to do. Ill take a look into it and see if I can make a video about it at some point in the future :)

@desgoldhawk3886 2 жыл бұрын

thank you so much for this, I seem to be missing something and I am a newbie. When I load my card for the cut it cuts at the top of the mat but the card is at the bottom as you showed me, where am I going wrong?

@KellyRossouw 2 жыл бұрын

Hi Des! You are welcome! You need to make sure that you are moving the design to the same place in all places you want to cut it on :)

@user-yq6me7en9k 5 ай бұрын

Thank you so much for this. ☺️ Do you think there would be any way to use this to emboss leather?

@KellyRossouw 5 ай бұрын

Most people engrave the leather instead of embossing it. I dont think the embossing tool would leave enough of an impression - depending on the leather of course!

@aniavazzo Ай бұрын

Thank you for your video. I am fairly new to cricut but have learned a lot in the last few weeks and have been able to cut out some very detailed cards and successfully scored fold lines. I will have text on the cards and would like to deboss it. When I tried this for some reason the debosser tool is only debossing the outline of my text. I'm not sure what I'm doing wrong. Perhaps you can help? Also using your offset method to deboss how do you make sure the second piece of paper adheres to the first? Thank you.

@KellyRossouw Ай бұрын

You are most welcome! The tool is intended to only do the outline, which is why we use the stencil to deboss out the entire section! :) The paper doesnt adhere to the "stencil", it removes from the mat leaving the negative behind :)

@Tansvorster 2 жыл бұрын

Thank you for this video. Will this method work on faux leather?

@KellyRossouw 2 жыл бұрын

I havent tried yet :)

@daliasamak3898 Жыл бұрын

Hi, I’m new to Cricut and loved your video. Is that the Cricut Kraft board you used? And will the fine point blade that came with the maker3 cut it or do I need to buy another blade? Thank you!

@KellyRossouw Жыл бұрын

Welcome to the family! Yes, the board underneath is the Cricut Kraft board - fine point cuts it perfectly, no need for another blade! :)

@diannerobert3822 7 ай бұрын

Very nice video tutorial, but will to watch the video a couple of times Because I don’t quite get it yet. 😊

@KellyRossouw 7 ай бұрын

Glad it was helpful!

@ldylvtt1716 Ай бұрын

Hi I loved the video. I’m new to Cricut and fairly new to You Tube. How do I turn off the ad that takes up 1/3 of the video screen? I can’t see the right side of your video. Thanks

@KellyRossouw Ай бұрын

Thank you so much! I unfortunately cannot control the ads that are on the video, however there should be a small x mark in the top right hand corner which should close the overlay of the ad if/when it pops up

@rebeccaramirez7098 Жыл бұрын

Great Video! Is this how the Cricut maker 3 would also use the deboss tool?

@KellyRossouw Жыл бұрын

Thank you! Yes, exactly the same 😊

@HarleyGrl23 2 жыл бұрын

How about crafting leather for bookmarks? Regular deboss doesn't seem to show very well even on the lighter colors so wondering if this would work better than messing with vinyl.

@KellyRossouw 2 жыл бұрын

I havent tried yet unfortunately :(

@patriciadavis-scott1599 6 ай бұрын

Wonderful video--thanks for sharing. I am just a bit confused. Do I set the off-set when cutting or just when I start to emboss/deboss?

@KellyRossouw 6 ай бұрын

You offset the emboss layer!

@nourangroup5097 Жыл бұрын

Thanks for the video and can I do it with cricut explore 3?

@KellyRossouw Жыл бұрын

This tool is only for the Maler and Maker 3 unfortunately

@nachtschimmen 10 ай бұрын

I haven't worked out how you use my embossing tool yet... I set my designs to deboss but no result is produced on the paper. I will watch your film again to make sure I'm doing it right. ...But you'd be interested to note that I've worked out lots of ways to make embossing folders myself - I've also uploaded the designs to DesignSpace that you can make in any plastic or vinyl which consists of two or more layers which allows you to peel one of the layers off after cutting. I love using Floor Lino the best and I'm getting great embossings with it on thick cardboard and one of my embossing devices or printing presses. Thanks for this film. I really want to work out how to use the embossing tool but on my third try I'm still got getting a result in cardstock!

@KellyRossouw 10 ай бұрын

Good luck! Yes, I use this technique myself, and actually recently released a video on it - kzfaq.info/get/bejne/rb2IqLiiztCzl4k.html