How to Embroider 4 SIDES of a HAT (3D Puff Front & Back)

No video

How to Embroider 4 SIDES of a HAT (3D Puff Front & Back)

Рет қаралды 20,701

Күн бұрын

Would you like to learn how to embroider ALL four sides of a six-panel cap while also incorporating a 3D puff effect? Then be sure to follow along with us as we create four Miami-inspired designs and take you step-by-step through the process of embroidering them on each side of a flat bill, six-paneled structured cap. You’ll learn what materials you’ll need, how to set it up in digitizing software, tips and tricks for creating a 3D puff effect, and proper hooping techniques to get a fully-covered, one-of-a-kind finished product that will fly off the shelves.
Check out this must-see tutorial on how to digitize a 3D puff design: • How to DIGITIZE 3D Puf... ]
Watch this video for more information on the 8-in-1 device and different cap embroidery hoops: • Best Hoops For Cap Emb...
Join the Ricoma newsletter for educational blogs, videos, and live webinars: info.ricoma.co...
To learn more, schedule a virtual demo today: ricoma.com/US/...
Get our latest Ricoma embroidery KZfaq videos sent straight to your Facebook Messenger: manychat.com/l...
To receive embroidery tips and techniques from seasoned pros and get free embroidery content and advice, join our Facebook group, Embroidery & Printing Business Help: / embroideryprintingbusi...
To learn more about our embroidery machines, visit our website: ricoma.com/US
00:00 Intro
01:10 Materials you’ll need
02:00 How to digitize
04:03 Proper hooping techniques
05:29 Embroidery process
05:51 3D puff effect
07:50 Back-side embroidery process
09:44 Finished cap
We begin by giving you a breakdown of all the materials you’ll need to embroider on all four sides of a flat bill, six-panel structured cap. From there, we’ll show you how to create a four-sided design efficiently in your digitizing software. For this project, we used Ricoma’s industry-leading Chroma Luxe software.
After that, it’s time to embroider our Miami-inspired cap. We’ll take you step-by-step through the entire process - from proper hooping techniques to how to properly embroider each side of the cap and achieve a 3D puff effect in your design. Along the way, you’ll learn all the tips and tricks to make sure your four-sided cap embroidery goes as smoothly as possible.

Пікірлер: 56

@ricomatv Жыл бұрын

Which tips and tricks are YOU using to ensuring your 3D-Puff comes out great? Share below!

@Steves_Embroidery_Studio Жыл бұрын

Is the cap hoop available in chroma inspire?

@SamuelWanuku 2 ай бұрын

Well explained very helpful.

@ricomatv 2 ай бұрын

Glad it was helpful!

@henryma1734 Жыл бұрын

That design is absolute 🔥

@ricomatv Жыл бұрын

We totally agree!

@ikendoitdotstudio 6 ай бұрын

wow this is so dope! An embroidery machine might the next thing needed for the studio

@ricomatv 6 ай бұрын

We are here whenever you are ready! (: You can also submit a request to our team > info.ricoma.com/contact-us/o?Organic%3A%20Ongoing%20promotion&Organic

@TheBrandElevator Жыл бұрын

Now this is a file that should be available for download🔥

@ricomatv Жыл бұрын

We will be sure to add it in the future!

@JesseB1983 Жыл бұрын

LOL at the "dale" in the beginning! Doesn't get more Miami than that!

@cubanian385 Жыл бұрын

Gotta stay strong to the roots Jay! 🤣

@embroiderydesignandboutiqu6956 Жыл бұрын

hey, I like how did you explain with arrows, thanks

@LucyLu70 Жыл бұрын

Woww that came out great

@ricomatv Жыл бұрын

Right? :)

@justseamsrightlindawoodsbr2914 Жыл бұрын

Great tutorial and design.

@ricomatv Жыл бұрын

Many thanks! Hopefully we can see your masterpiece soon!

@VanityFerret Жыл бұрын

I just got a set of 8 in 1 Hoops! Am looking forward to using them! What speed are you stitching at? Nice video! Thanks!

@ricomatv Жыл бұрын

Hi! we ran the cap at 650 spm in exception of the 3D Puff in which we ran that portion at 500 spm.

@antoniolamarca6094 Жыл бұрын

hello, nice tutorial! what kind of needle and thread do you use for the 3d effect? what density of point?

@ricomatv Жыл бұрын

We used standard 75/11 needles and regular thread! We recommend embroidering at a slow speed when it comes to 3D puff.

@evan6299 Жыл бұрын

Are you guys coming to the ISS show in Atlantic City in March?

@ricomatv Жыл бұрын

Hi there, we will not be a part of the ISS show. However, if you are near Las Vegas we will be attending Printing United!

@damianstrudley2265 Жыл бұрын

Great video ...

@ricomatv Жыл бұрын

Thank you for watching!

@aureliomartinezjr8328 9 ай бұрын

Can you 3D Puff side of hats? Or what is Side of Hat Embroidery called?

@ricomatv 9 ай бұрын

You can do 3D Puff on the side of the cap!

@sherryloucks4500 Жыл бұрын

when I put my designs in the software its adding a running stitch witch throws off the center, can you explain how to add all three designs with out getting the running stitches?

@ricomatv Жыл бұрын

Hi Sherry, we recommend reaching out to our customer service team so they can help > service@ricoma.com

@rongriswold2652 2 ай бұрын

my drop down does not have a cap hoop option.

@ricomatv 2 ай бұрын

Hi there! Which tier do you have?

@rongriswold2652 Ай бұрын

@@ricomatv Chroma Luxe

@bethpetty3059 Жыл бұрын

I have the most recent version of chroma luxe but the cap hoop is not an option available. Where can I get this, please?

@ricomatv Жыл бұрын

Hi there, can you please send the service team an email so they can help? service@ricoma.com

@constancebell454 Жыл бұрын

Can you provide digitizing for this design, can I change the R to a C?

@ricomatv Жыл бұрын

Hi, at this time we don't have this file available, but we hope to have this available soon.

@constancebell454 Жыл бұрын

@@ricomatv thank you

@rogeliofontes4481 Ай бұрын

the bill was messed up

@ricomatv Ай бұрын

Hi Rogelio! Thanks for your feedback.

@Steves_Embroidery_Studio Жыл бұрын

Is the cap hoop available for inspire?

@ricomatv Жыл бұрын

Hi there, were you referring to a Chroma tier?

@-an0nim0- Жыл бұрын

Question: How close to the bill can you embroider on a ricoma machine? The placement on both front and side logos seem to high to me. Thanks in advance.

@ricomatv Жыл бұрын

Hi! We recommend reaching out to customer service so they can give you some tips/tricks to help you! ---> service@ricoma.com

@cutformllc3451 Жыл бұрын

Typically there's a manual setting on the machine that automatically limits how low you can go but you can turn that off. You must have confidence you won't hit the frame. I don't below .5" from the brim on my machine personally and all my designs look great. The guy in the video didn't pay much attention to positioning the design properly but that wasn't really the point of the video