Thank you you gave two solutions to one problem. That's the way I look at problems find the solutions 🕊️

@@truthneverchangeswakeup2762 you're welcome, glad I could help 👍

Always use hot glue make sure your hot glue is the hottest like taking a red hot spoon and melt the glue in the spoon and pour it on the hole

Sweet dude, super useful,thank you!

@@epicproductions8212 you're welcome, glad to help 👍

Sorry to hear, your back will be better off if you just deflate it all the way and sleep on floor tonite until you can fix tmrw

You didn't even put the colons between the numbers

About the same sprung a leak ~0230. Got a cot set up by 0315, but can't sleep thinking about my leaking $200 air mattress so I am watching this a 0330.

Lmao same! Smh

@@christianalexander579 you didn't even put a period at the end of your sentence.

You're welcome, happy to help. Haha yup it happens! Good luck 👍

did it work?

Sorry to hear, hope you can get it fixed 👍

Lol. Feeling like the meat in a taco.

@@Kre8iviT27 haha thats what I always call it "taco bed"

Awesome! You're very welcome, glad I could help you out 👍

Happy to help 👍

@@theresadaly6318 You're welcome, happy I could help 👍 Hope you can get it fixed or get another bed 🛌💤

Awesome, you're welcome. Happy I could help you out 👍

Same, no one does that anymore even though it’s realistic. Props to this guy for being real

Thank you! Good luck on the patches, hope you can get a "soggy" free mattress nights sleep 👍

@@CohenSchmidt thank you! 🙌 I try and read and respond to all my comments on this channel 👍

Hope it worked! 🙏

My friend tried crazy glue and tape masking tape

Hot glue gun works for mind

@@JonnyDIY It did! Thank you! Then I got another small leak a week later 😔 And this was a pretty decent mattress! I was so tired though from so much recent trauma that I would just drink a lot of iced tea before bed so I would have to wake up every couple of hours to pee. And blow up the bed. Lol. My aunt shipped me a fab one, Brookstone Queen, the tall one. Now, 2 months later- I'm back to your feed to make sure I'm fixing THIS hole correctly. Ughghgh. FML

@@RadioWendy22 sorry to hear you got another leak. I feel you, I slept on one when I was doing renovations on a house for about a year. I made sure be real careful and put a rug under it. Careful not to push right up against wall cause could be carpet tack strip poking up

You're welcome, glad I could help you out. Good luck 👍

Haha it happens! Turns out that batch of glue I first used was defective 🤦‍♂️ Got it done though! Patch still holding strong, just used mattress a couple weeks ago 👍

You're very welcome, happy to hear you were able to fix them and that I could help out 🙌👍

Hope you can get it fixed! Soggy air mattress is the worst. Good luck 👍

Haha that's awesome 😄👍 whatever works right!

Your bed didn't need a patched it needed a drag 😂

Did it last?

You're very welcome, happy to help. And thank you for your kind words 🙌👍

Awesome, yeah that tape is great. I got a big old roll of it I use all the time for things 👍

Thats awesome, thanks for sharing 👍 never tried that way, but sounds similar to like hot glue gun

Awesome, glad I could help you get it fixed 👍

Thanks John, you're right the sharp corners tend to start to curl and peel off. Hopefully this patch holds a few more uses at least 👍

Thank you! Glad to help 👍

You're welcome, happy to help 👍

Thanks for sharing will have to give that a try. Have patched many a mattress this way over the years, without issue though

@ 2slofouru: Is there a specific type of goop? I’ve seen the product at Walmart or Home Depot. Sometimes there are multiple versions of a product and I want to make sure I select the correct one? My air mattress is also vinyl but I suppose most of them are?

Intresting

Is it called Goop Sealant??

😄 You're welcome, glad I could help 👍

You're very welcome, happy I could help you out 👍

Thanks will check that glue out. Still holding fine, just used a few weeks ago. First patch turned out to be bad batch of glue.

@@JonnyDIY fair enough then! Glad it held up for ya!

Ha ha ha. This video is bringing great comments. Humm. Is it time to do an update?

I have velvet on one side and the rubber on the other side I fixed the other side with this very strong tape that I have and then it ended up when I put the air in it found five holes pin holes on the Velvet and nothing seems to be helping should I put that glue on the Velvet I haven't tried that yet for the tower glue I'm so freaking fed up LOL with this trying to fix this it's so aggravating and it's a big king size one and camping and been laying on the ground in the tent for a day and a half and I'm ready to pull my hair out I can't do anything on this velvet it's so thick please somebody help me so I use the bicycle glue I thought about a hot glue gun but I don't know if you could put that on there and I use the the soapy water you see God if I can find any more holes but I don't see any more holes it's just aggravating find something to stick on his velvet if I could put that glue on the Velvet please let me know I appreciate it so much thank you 😕lol ..

What's the best patch kit for PVC air mattresses?

Happy to help 👍

You're welcome, glad I could help. Hope you get it fixed 👍

Awesome, glad to hear you were able to fix the leak 👍

Awesome glad to hear you got it fixed and I could help a little bit 🙌👍

It's great! I slept on it for a few months when I was working on a vacant house 👍

Hope you can get it sorted, and have an awesome camping trip 👍

Thanks Josh! 😁👍

Thanks J K ⌚ me too, they run forever too! 👍

Sorry to hear, hope you can fix today. Merry Christmas 🎄🎅

You're very welcome, happy I could help you out 👍

I would think those kind of parts would need to get from specific manufacturer. Or take apart and see if can order same part

Happy I could help, good luck fixing 👍

You're very welcome, happy I could help you out. Haha I'm always afraid my cat will use corner as scratching post too 😸👍

You're welcome, glad I could help you out 😁👍

Been there done that! My back would be a wreck those days! 😄

LLLLLLLLLLLLLOL BROTHER

Wt

No problem with the soap solution. Its just some sort of felt that's bonded to the vinyl or whatever these things are made of 👍

You're welcome, happy I could help and give you a smile too 😁👍

You're welcome! Happy I could help 👍

You're welcome, hope you get it fixed 👍

@@fakecandyheart you're very welcome, happy to help 👍

If it works and holds air, that's all that matters 👍

Bummer, sometimes they do just develop leaks over time

I've gone through a few since Nov 23. I feel the same way lol. These KZfaq videos are really helpful

Yes that will help to thoroughly scuff. I've patched the tops with success with this method and another using e6000 glue 👍

Yes for sure it'll help, I usually leave for a couple hours at least

You can do the same fix as I did here, but be sure to scrape and sand off all the old glue around the hole. And since on the felt you use a lil bit more of the patch glue. Can get a bicycle patch kit at any Walmart, sporting store or bike shop 👍

Thank you Jack! Hope it was helpful 👍

Lol I'll have my cat "accidentally" use the corner of the bed as a scratching post 😸👍

Smh evil as hell are they annoying and dont like you for no reason? If so I understand

Same procedure, make sure to thoroughly scuff patch area. I've patched a couple holes on that area before and didn't have any issues 👍

That's what I'm looking for the Velvet part I got like six little holes in it for my cats I found the holes but I tried absolutely everything to cover the holes to seal and nothing seems to work and he suggestions please

Ok so I used Gorilla glue and cotton from the tip of a Q-tip. Held for about 2 weeks. Now leaking air again. I also have cats in house. So it's either a new hole or the glue has cracked and leaking. Any suggestions...

I used duct tape, I was super desperate to quickly fix it but it’s actually working so well! I did a small square of tape over the hole, then a bigger square of tape over that, and then a final piece over that.

did you patch the hole with duct tape when it was inflated or deflated?@@_supanova__

Yes that will work too, I've used that before 👍

But do in very ventalated area. That fumes cause cancer. Read the label

You're welcome, glad I could help you out 👍

You're welcome, glad to help 👍

Thanks for sharing. As long as it holds air, good to me 👍

Sorry to hear, you'll probably get a better nite sleep if you just sleep on floor with some cushions or extra blankets. Good luck

Lol whatever works! 😆👍

Pls do explain I’m in distress now

Where can I get lidocaine patch please, my bed is leaking 😫

@@chikamatthew4064 get a bike tube repair kit, readily available many places 👍

@@JonnyDIY thanks

Yes, thats exactly what I used 👍

Keep on keepin' on 👍

Take all the air out first as I showed in video

Awesome, you're welcome. Happy I could help 🙌👍

Yes it should still work, I've patched both areas with success before. I just use more glue on the felt. If small prick put glue over hole then glue patch over whole area as well. Make sure to clamp down as I showed as pressure while drying will be key 👍

You're very welcome, glad I could help you out 🙌👍

You're welcome, happy to help 👍

Can try super glue or something like that if you have it. Or go to store and get some glue like this

You're welcome, glad to help 👍

Yes that will work too. I've been patching air mattresses this exact way for 20+ years and never had a problem with one failing 👍

@@bradleysample3246 awesome tip, have never heard that one. Have only heard the put lips near leak and youll feel it there because skin thin and sensitive

@@JonnyDIY yes the skin is thin there too. I discovered this by accident

Yes, you can use a thicker glue like e6000 with patch too

Yes is will work wherever the hole is located. I've had success patching air mattresses all over so no worries. Happy to help 👍 Good luck

Yes exactly!

How do you fix the edge

I've always had luck with either listening for it, feeling for the air (sounds funny, but if you put your lips near leak you'll feel it), or the soapy water spray bottle. It's also possible its leaking from the pump mechanism. I've never taken one apart to see if possible to fix that though.

😬 Sorry to hear I hope it fixes it 🙏🤞

@@JonnyDIY Thank you, i hope too if not is gonna be a long sleepy day at work.

Ooo 10 inch hole will be tricky to fix. It's possible with a very large patch, but will be difficult to get to seal I'm thinking. You could try. I would probably just get a new one though or be prepared to at least if doesn't work 👍

@@JonnyDIY Appreciate your reply! We managed to tape it with a bunch of duct tape but there’s still some air going out :( We’ll probably just get a new one or keep working on that… Thanks for the advice!

@@ashleychang5318 you're welcome, good luck 👍

You're welcome, happy to help 👍

It's not too bad, whole process with finding hole and patching should take maybe an hour 👍

Yeah true. The 2nd patch I did is still holding today though. I have the bed set up right now and it's holding air perfect 👍

Thanks! The Dodgers one I got for some kind of in game promotion at a game years ago 😆👍 but it's definitely my favorite one of my collection

👍

I think that is the only and the best of the investment ever!!

You're welcome! Happy I could help 👍

Hope you two can get it fixed 🙏 that doesn't sound like a good nights rest. Lol they are realllly loud, especially in middle of the night 😄🚀

Lol. Good luck, Merry Christmas! 🎄

"If at first you don't succeed, try, try again." 😁👍

Thank you! 🙌👍

Nice, as long as it works 👍 may not be long term fix, but sometimes quick fix is what you need

This will work there too. Just be sure to thoroughly scuff and clean area before applying glue and patch 👍

Actually no use gorilla glue or hot glue sticks and follow instructions on the other videos that work

@@mikegamez77 sand it as smooth as you can and can do it as I showed or can use a thicker glue like e6000. Ive used that with success as well 👍

@@JonnyDIYwill try that. Thank you!

@@mikegamez77 you're welcome, glad to help 👍

Usually if the leak is from the pump you're out of luck and will need a new one. That or take apart the pump assembly, and try and figure whats leaking

If big, slip a small piece of tape in hole and press outside of mattress against it. If not too big can lightly glue just the punctured area first, wait to dry then large patch over hole 👍

@@JonnyDIY thanks for the quick reply. I appreciate it.

@@christ9359 You're welcome, happy to help. Hope you can get it fixed 👍

You're welcome, glad I could help 👍

Thank you, & you're welcome glad to help! 👍

You're very welcome, and thank you for the💲💰 🙌👍