How to find out if the Honda Vario Karbu 110 Cdi is still alive, good or dead or damaged.
The first step that we must know is the color of the ignition cable on the cdi socket pin, which is as follows:
1. The red wire with the black line is the battery or kiprok current after the ignition is on, and make sure the current reaches the cdi socket pin.
2. The green cable is as a mass path to make sure it is connected to the body or motor frame.
3. The green and white line is the mass path from the side standard that goes to the CDI when the side standard is lifted up, or also known as the stop engine. For the green and green cables, the white line is actually the same as the CDI's ground or mass line.
4. the blue wire, the yellow line, is the path from the pulser that goes directly to the cdi and make sure there is current up to the cdi socket pin.
5. The black yellow line is the ignition path for the output from the CDI that goes to the coil and make sure there is a current. If the cable doesn't emit current, it's confirmed that the CDI is dead on condition that the book is correct. Check the cable path above.
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
please #subscribe#
@Sidik Nuryaden CHANNEL.
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.