Thank you! After days of searching and being given vague and derisive answers, this video CLEARLY gives me the answer I need. Much appreciated! :)

Great video and tuts. One of the best way to find the ACC (accessory) 12 Volts Power in your car is from the "Secondary Fuse-box" Inside your car, normally it is located directly below your dashboard, some Ford have them on the Right, while Nissan and most Japanese cars are located on the Left portion of the dash near the OBD2 Inputs. It's where your "Cigarette Lighter Fuse" is located and it is an ACC unit, just tap to it. Although, in some car it's difficult to run a wire from the hood to the Inside-Dash of the car, some car it's very easy, simply pull a rubber grommets, then your LED wires are in.

The instructions are clear n concise and appreciated by those of us who know very little about vehicle wiring. Thank you

Thanks a lot ! after having tested all the fuses I thought I had to pull a wire to the cigarette lighter...then after a final search in French then with the same terms in English I had the pleasure of seeing your video! It works perfectly kisses from france 🇫🇷

wow! very simple demonstration but i learn alot.. I've seen some videos that i don't understand. thanks guys!

Good instructional video but I would add to be sure you protect the new circuit with a proper fuse. This will prevent you from burning up your car from the circuit catching on fire. I have 40 + years experience on wiring on automobiles. The girl did a good job of showing you how to find a suitable circuit for the led lights. Excellent Job mylady

So easy, thanks so much. Am flabbergasted at how great they look. My small truck is now 'visible' . Next, the Mustang.

If I wire in switches to turn on interior leds is there a need to do the acc? Since I am in control of when they are on?

Very good clear video, just a slight observation, when starting your vehicle make sure that any loose objects (fuse box cover etc.) do not slip down into the engine compartment otherwise you might end up with something getting broken 🤔🤔🤔

If there's a competition for stupid and terrible installation advise, this is definitely the champion

Congrats Girl ! You have done a great job ! Very precise and great presentation ! You Rock ! One of the best presentation i have ever seen for trouble shooting an ACC 12V. 10/10

Very clear instructions. Yes a pigtail fuse add-on would be safer but I had a 40’s vintage pickup truck where I wired in some extra circuits and never had problem. The added wire was always fused with an in-line fuse added for the new light or whatever

Been looking everywhere for a vid like this. Thank you 😉

PLEASE REMOVE THIS VIDEO! It seems that the comment section has it all covered, bit it needs to be said over and over again...Do NOT wire your aftermarket daytime running light in this manner. The people that uploaded this video should be ashamed for giving such horrible advice. The relay socket is no place to junction electrical wiring from. The other issue by judging all the 👍 means that you may have directed some inexperienced people to use your method and compromise the vehicles electrical integrity.

Horn is never ACC, Horn is always on; can you show on Honda CRV 2013, which relay to use; and which metal pin to use.

Thanks .... you help me a lot... in my hyundai sonata gls .... now my fog lights is working. Thanks

But will you be able to close the top to the fuse box now? Or will that new wire be in the way

You seriously made it so easy to install. Not like the other videos some of the car tech guys show. I got confused with their videos...

if my ac dosn't work anyway can I just wire it into that?

its use full video. but I have a doubt that why cant we connect LED's wire directly to the Horne's wire, instead of inserting into the relay. please advice me someone if I am wrong. Im not all good in this kind of work. but I want to install LED DRL lights to my car.

hanks for your simple and well delivered video, can you please help to me to know the ACC relay on my 2008 dodge charger sxt, I need confirmation to be sure as I have bought a LED DLR to use.

Thanks for posting.. tomorrow I'll will try.. thx Again...very Clear the way u explain it.

what is the big black relay with a white label in the top middle?

so would i use the yellow wire run it there to my stereo would i have power?? my situation is pretty difficult to figure out

very nicely explained

will this work for headunit acc wire? please

omg that's the most helpful video showing how can we install LED day light easily .. thank you

What a great "how not to" video :0(

So do i have to connect the cable below the fuse or ia there spare wire

i have a dayligh and night light. where should i put the night light wire?

where should I attach the yellow wire (the one for signal)?

disconnect the least important relay, im gonna do my horn. hold up u need that pimp

I like it when she says ACC

How could I tap to ACC/12V of 2016 Camry? The current Video did not correct with the camry 2016..Please help

i'm so impress....i don't know is safe but that quite easy..thanks

Thanks, but how do you do it inside the car for parking sensors please.

That moment when you find out your burning a wire due to overloading...hey why is there fire trucks around my car ...

Works well for cheap security alarm. Wire up a horn through this and a throw switch under the dash. If someone tries to start car without knowing to first cut switch, the horn fires up when the car starts.

Hi! Will this work on a 2015 Mazda 3 i Touring? I found those LED strip lights (for the headlight lamps area) from your website, and was wondering if they would work the same way as this video, thanks!

im trying to connect a LED hood strip light to ACC. from the comments im NOT going to do what she did, but i have no background in cars. what do i need to attach the red wire to a spare fuse in the fuse box? i keep hearing "fuse tap" etc, is that what i need to connect the red wire to the fuse?

I used pin one on the ac relay but when i turn on the ac in car the lights go off? Any help would be appreciated

damn, looking all day for something about using relays thank you! and your cute

So I'm wiring lights, I put the wire in the number 1 slot for the horn but the light still turns on with the vehicle turned off. Any suggestions?

Terimakasih petunjuknya bu ....

Very helpful! Thank you so much!

Wow 😲very helpful 👍

I did something like these in my Civic, taking care to open a little hole for cable passing keeping moist and water protection in the box. I used a extra glass cartridge fuse, to protect the feeder. Despite the simplicity of the installation, it works, RDL lights got current less than 0,5 Amp. both of them.

This has helps tons!!! Thank you!!! I ordered a pair of halo lights for my 2012 jk jeep unlimited and it has the EXACT same wiring, needless to say when I say it at first I thought I was starring at hieroglyphics haha

I love your video and awesome 👏

So does this really works? Still trying to figure this out.

NO! Don't put bare RED wire in like this! Go to auto store and get a an "Add-A-Circuit" for your type fuse (example - this video shows micro, mini, or ATO size, your owners manual will tell you). They are also called "Taps". But NEVER bare wire like this! There WILL BE a "ACC" accessory (switched hot) that you can pull to add this additional circuit.

Location location location location! Nice video

Perfect instructions!

Thx..... It helped me out alot....

Very helpful, thank you

i used 1 hand to push it in, is that ok?

Thanks to you lady I did this way back in 2015 for a Toyota Mark X and worked well my little brother owns that car now and the wiring has no problem at all the lights are still in great shape I have done the same with a Lexus GS350 I purchased in 2017 I don't see any problem at all still wondering why some people are so negative here. Try it out first before coming up conclusions instead of lashing out at someone

awsome, was able to install my DRL on my Tiburon, I used the AC relay.

How do I connect the right side with no fuse box?

Very helpful.

I did this and it dose not work for Nissan Altima 2013!!

This is terrible advice, you should never shove a bare wire into a relay socket for an "install"

I would think an add a fuse would be better. you are protecting the wire with a fuse, also, you dont have a ghetto connection going on.

Could you please show how to install running light in Pruis 07

Thank you very helpful

Now I need to see a man knitting tutorial and my life will be complete.

Why not invest for cheaper multimeter. I think it safer and proper way to check wiring. Myselft seldom use the pen tester.

hi. I do not find Acc fuse on explorer 2002

I don't know much but your voice is like an angel......

Absolutely perfect video!!! I was using a generic led strip that only had the positive and grounding wire and could not figure out how to use a fuse for it. Once I tried the relay, it worked like a charm and I felt like an idiot for focusing on one thing for 4+ hours. Ive never done this kind of mod on any car so I was not versed at all in this, this morning that I decided to just try it. Thank you thank you thank you!

Does anyone know where the ACC in the fuse box of a 2008 Prius is?

Thanks, couldn't figure it out last night. To wrap it up and make sure it works I just ran to battery but of course they WON'T go off. Fixing it today.

THANK YOU MUCH

If you connected to the post it won't turn on then right, then you will just have to reverse the position right respectfully asking

very helpfull 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼💯

Thank you it work 👍

Nice job idol Keep safe blogging idol

Good info thanks

Thank you sister

I do not understand why the horn relay port one was hot. Is not it only hot when the horn button is pressed? Please clarify.

So the ground wire connects to battery ??

i searched how to find a fuese box in friday the 13th and thise popped up XD

Excellent!

The running lights will come on when the key is in run position and the engine is running and shut off when the key is off and engine stops running. it's automatic NO switch.

बहुत अच्छा लगा

Nice video, you have a very nice voice btw (v:

Depending on how many amps you are going to pull on the wire and the size of the wire a fuse is the safest way to go

I love your voice

my friend has a 02 escape nd jst recently the interior lights , factory alarm or the radio doesn't work anymore. I even check the fuses. Anyone who may have this problem before or know of this please leave me msg.

I didn't buy my led fog lights from you guys, but the company I did buy them from gave me no instructions. Thank you so much! I'm buying from you guys from now on

Helpful

baghdad special

wonderfull

Thank you

I have a switchback drl with harness, plug and play to my turn signal except the DRL, it has 1 wire that I need to tap somewhere, I can tap it to the parklights so it turns on when I switch the parklights on. My car is 2016 yaris model with no DRL so I want a DRL. I couldn't find the ACC fuse in the engine fusebox and it's a hassle if I tap it in the dashboard fusebox, I did this in the horn relay but my horn just blared continuously lololol embarrassing, instead of the horn relay, I shoved the wire to the relay beside it namely FAN 02 and it works. Because my switchback is plug and play I figured it is still protected by the oem relay and fuse and the Drl wire is just a trigger not the power source. Been running this setup for about 4 years now. The switchback and drl is still running good.

A fire waiting to happen!

Why not use a $6 SpyTec Hardwire fuse adaptor? Safer and you don't mess circuitry that may cause fire.

Very good

Super, thank you wery much!!!!

why you cant use a tester?