How to Finish a Table - How to Apply Rubio Monocoat
Рет қаралды 1,097,138
3 жыл бұрынHow to finish a table by applying Rubio Monocoat. In this video, I’ll show you how to apply two coats of Rubio monocoat. I discussed this technique with other makers as well as Rubio themselves. Rubio says most woods only need one coat, however, you can apply a second coat to species like walnut. There are some tips and tricks you need to know to avoid some potential problems though. Since this is designed to be a one-coat finish.
Want to build your own epoxy table? Check out my epoxy table virtual workshop: workshops.blacktailstudio.com/
Related videos and blogs:
How to sand wood: www.blacktailstudio.com/blog/...
Step by step guide: www.blacktailstudio.com/blog/...
Items used in this video:
Rubio Pure 2C (this one): amzn.to/2OMUMYh
Rubio wood cleaner: amzn.to/2OQ4GbH
Rubio maintenance oil: amzn.to/3jtJmqt
Festool Sander (6"): amzn.to/32RpWWR
Dust extractor for sander: amzn.to/2E4xomU
Spreader: amzn.to/2CClcta
Light stick: amzn.to/3jpxaHc
Photography light: amzn.to/32MPsfI
1/8" roundover: amzn.to/2X3sCwT
Trim router: amzn.to/2WHp9np
Syringe set: amzn.to/3fVxMSP
Gem Buffer/sander: amzn.to/2CClHU4
Gem buffer: amzn.to/39kRZPk
Buffing pads: amzn.to/2OPDQQM
Mirka abranet: amzn.to/3eTQ1Xk
Maroon pad: amzn.to/2OM6ySy
Table base made by: www.builtbysteele.com
blacktailstudio.com/
/ blacktailstudio
/ blacktailstudio
@2asere 3 жыл бұрын
Cam, awesome video AS ALWAYS, Question, How much drying time between 1st and 2nd Rubio coats? Thanks a lot
@BlacktailStudio 3 жыл бұрын
Oh, good question! Should have mentioned that. 24 hours.
@2asere 3 жыл бұрын
Thanks a lot
@lpelch 3 жыл бұрын
I finished wood floors for forty plus years. The last ten we used hardwax oil. Rubio was one. The temptation is always to go with a couple thin coats. With furniture that might be best. You can, however saturate the piece more on the mono coat. Leaving the finish in contact with the wood for 10 or 15 minutes let’s it penetrate and fuse with the cellulose fibers in the wood. We always thought of working it into the wood until no more would go. Even so, it is amazing how much coverage you get from a liter. Also worth consideration is Woca Diamond. Using white oil on distressed wood was a go to for us. Love your work, Cam.
@BlacktailStudio 3 жыл бұрын
Thanks Larry! I’ll definitely check that out
@tonyarend9234 3 жыл бұрын
Cam I was wondering if it is ok to wait longer than 24 hours between coats? I ran out of product after the first coat, now waiting for more to come in. Thanks
@michael.schuler 2 жыл бұрын
Cam, thanks for these great Rubio videos (and your many others.) Just finished with Rubio for the first time on a pretty spectacular bookmatched walnut free edge dining table, and before each and every step of the finishing process I reviewed the applicable segment of your video as tutorial. Your brief summary captions at the end of the video were particularly useful. I got a beautiful natural result and felt in control of the process throughout --- no doubt avoided a number of newbie errors that could have turned my peaceful maiden voyage into a frantic nightmare. It felt like you were right there giving me instructions mano a mano. Thank you!
@jerryjohnston7575 Жыл бұрын
After watching the video advert i was still skeptical. But when i finally downloaded the plans kzfaq.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!
@stanleymischol6084 2 жыл бұрын
Cam, thank you very much for all of your videos. They are really instructive and have pushed me further into woodworking than would ever have believed.
@rjwohlman Жыл бұрын
Coming back to get my tips on how to finish my table. I sincerely appreciate this KZfaq page for help guiding me in building my first epoxy table. It's turned out beautifully with hardly any major errors. Thank you buddy keep up the excellent work... and then sharing all your great tricks!
@hiddenvalleyprojects9218 2 жыл бұрын
You always blow me away with your projects!! Such a inspiration!! Thank you! P.S. Thank you for never skipping a step.
@mosesfisher4415 3 жыл бұрын
Cam, I made it to the end like I do every time. I don’t have a question just wanted to let you know you are doing a fantastic job of instruction and complete information. 🤘
@BlacktailStudio 3 жыл бұрын
Thanks Moses! You’re a good man
@lynetteyoung9777 2 жыл бұрын
Cam, Thank you for making these videos. I enjoy watching wood, especially walnut, come to life through your expertise. I have loved walnut wood since I saw an Aunt harvest it from her property and have it made into her kitchen cabinets. I was a teenager then and finally when I had my own kitchen remodeled at the age of 50, I had my cabinets made from walnut. I was asked what kind of stain I wanted them to apply and I felt surprised, wondering why anyone would do that to walnut. I replied that I wanted something clear so I could see the wood. My refrigerator, trash compactor, and dishwasher are fronted with walnut. It is a most beautiful room. Watching you work with wood is such a joy. Again, thank you from Syracuse.
@michaelfmarcos Жыл бұрын
Man I'm about 2 months into my first epoxy table, tonight I'm about to do the Rubio finishing, and I just have to say thank you for all your content. I get into a lot of hobbies and people usually ask where I learn from. My usual response is "KZfaq University" but for all the stuff I've been doing over the last couple months, my answer has been Blacktail Studio. I've been woodworking for 2 years and learned a lot from a lot of content creators, but this project has been particularly rewarding and I have, effectively, you to thank for it. Thanks so much for all you do!
@coltonstallcup2343 Жыл бұрын
I’m about 2 months into my first one as well. I don’t know if you built a second one after the first. But if you did, did it go more smoothly? More quickly? TIA
@JaytheP 3 жыл бұрын
Cam, using your steps I made my walnut butcher block look the best it ever has. I’ve used tons of finishes and the Rubio (after 2 coats) looks insane. I think using maroon pads/steel wool after the first coat makes the second coat wipe on like magic. So beautiful, thanks to you.
@BlacktailStudio 3 жыл бұрын
Agreed!
@montesimpson7092 3 жыл бұрын
I feel so motivated to start a project everytime I finish one of your videos 💡✏📐🔨
@ruibento9840 2 жыл бұрын
I really like woodworking I had a crafts class and we were assigned to do projects in school
@toodamnmanyprojects7094 2 жыл бұрын
Hi Cam. I’m really enjoying your videos. You’re not only a master woodworker but also a highly talented choreographer, director and cinematographer. First compliment is about your choice of lights. I grew up in the film business in Hollywood. Why didn’t I think of that? Fabulous idea! Second, I’m a wooden boat guy. Restored many over the years. I’m stuck on my latest project due to medical issues. Dropping the table on your head was something I can relate to. One additional surgery and recovery and I’ll be back at it. Years ago I did a kitchen remodel with butcher block countertops. They were fantastic. Now I’m in the middle of a house remodel. Seriously thinking about slab countertops. You got me thinking. Just wanted to say thank you and let you know how much I’ve learned from and enjoyed your videos. Keep up the good work!
@clivine924 Жыл бұрын
coating video's are the best. I'm a hardwood floor guy and Rubio is known for showing sanding flaws. great job. fun and knowledgeable watch. I love coating hardwood and now I'm getting into tables for fun. great work.
@brucedutchuk7963 3 жыл бұрын
Love your work, as most everyone does!! I would love to see the video where you review different finishes. A contrast between higher end products and, of course, lower tier products.
@BlacktailStudio 3 жыл бұрын
I’m in!
@dwayneford1990 3 жыл бұрын
I think your finishes are classy, timeless and perfect for the wood species. A lot of people like the very shiny epoxy flood coat look. I think that's just a fad or something that might be fine for a bar top but for these big beautiful tables your finishes are the best I've seen.
@BlacktailStudio 3 жыл бұрын
Wow, thanks Dwayne. Really appreciate that
@cathyhedin6538 Жыл бұрын
Cam, thank you so much for this video. I have just finished my first epoxy table, well to the point of applying the Rubio monocoat, or so I thought. I'm glad I watched your video before I did. Gave me the extra confidence I think I was missing.
@genevievec9427 2 жыл бұрын
Your amazing Cam!!! Thanks for giving a old lady some new tricks on working with wood. Great job on the Rubio, I'm going to give it a try
@rogdotcom1 3 жыл бұрын
Cam, holy crap, love the legs on that table, absolutely awesome 👍. Great video on the finishing, learned lots !! Thanks
@BlacktailStudio 3 жыл бұрын
Thanks man!!
@jkmenegay 3 жыл бұрын
Cam, stunningly beautiful. I'm sending this to my son who likes to tinker with epoxy tables/surfaces; I'm sure he'll appreciate it as well.
@BlacktailStudio 3 жыл бұрын
Awesome!!
@jodytho 2 жыл бұрын
Cam thanks for generously sharing your techniques. i agree with your statement about stains. I love how the rubio just enhances the natural beauty of the wood
@toddwebster4977 Жыл бұрын
Cam! Beautiful work! This really is the fun part for me. I enjoy the wood working and creating something. I really enjoy the sanding to get a nice surface. Then putting finish and seeing the wood pop out. It makes all the work so much fun to do!
@dirtydandinoman8902 3 жыл бұрын
I dont come here to learn to build my own table, I come because its -Relaxing -Informative -Fun -Nice to watch
@BlacktailStudio 3 жыл бұрын
Can’t hope for any more from a viewer!
@unperrier5998 3 жыл бұрын
Cam, I jump straight to the end of the video to see what you want us to write in the comments :) Nice tutorial, thanks for posting it.
@BlacktailStudio 3 жыл бұрын
Cheater! Don’t blame you though 👊
@elainebiggers9915 3 жыл бұрын
That's awesome Cam!! I mostly use stain! I have seen Rubio monocoat but never used it. I'm definitely gonna try this.
@bryantpollard1390 3 жыл бұрын
Love your videos, just started pouring epoxy 6mos ago and learned everything from your videos, thanks cam you're a very talented woodworker and an excellent teacher!!!
@BlacktailStudio 3 жыл бұрын
Love it!
@harthenry Жыл бұрын
Thanks for putting every item you used in this video on your read-me section. Makes it easy to purchase the right stuff for the job.
@dannybruce4142 2 жыл бұрын
Cam, as I stated in another comment, I've had a lot of experience sanding and buffing many projects. Two things I would suggest. First, always use a mask and wear full body protetion like a zip up worksuit. Looks goofy, but it's worth it. Even when sanding wood. After two decades of working I had a sudden allergic reaction to wwood resin produced by sanding. If I hadn't been wearing a mask I woudn't be here today. My doctor said it happens. Also, I'd suggest to anybody who is interrested in perfect finishes to make friends with a local bodyshop as they have great knowledge and can advise on sanding and buffing tools and tecniques and materials that can result in spectacular results.
@MrRapeyou1 11 ай бұрын
Nerd
@M.L.Knotts 10 ай бұрын
@@MrRapeyou1dude... Your name.... WTF
@749Giovanni 8 ай бұрын
Thanks I went commando just sanded lol but your right I should of wore a mask
@stuart6478 4 ай бұрын
Sounds psychosomatic nerd
@alexsackett3626 4 ай бұрын
@@MrRapeyou1that’s what I came here to say
@Ian_Hay Жыл бұрын
Hi Cam. Question: in one or two of your later videos, you mention that you’ve sanded up to 220/240 rather than sticking to the max 180 (let alone the Rubio’ recommendation of max 120). Have you noticed any adverse effects and/or benefits to shading a notch higher than 180, i.e. 220/240, when finishing with Rubio Monocoat?
@512bb Жыл бұрын
Wow, thank you! I have always applied hand rubbed tung oil finishes but have become intrigued by the Rubio. As I have never seen it in person & couldn't really get a feel for the actual look in all the videos I've been watching... until yours that is, superb photography. I absolutely love the level of sheen, it actually looks like my go to Old Masters tung oil varnish, simply beautiful.
@johnbarnwell400 2 жыл бұрын
Cam …. I have been watching your videos for a couple months now and I finally subscribed because I am just so impressed by your work as well as the way you articulate what you are doing as the video plays … Your videos are by far the best I have seen .. Thank you for all the time you put into these utube videos as I have learned a LOT from you .. I own a pest control company but I am not as involved in the everyday activities of my business as I once was so…. I tinker in my wood shop making smaller tables , book cases, cutting boards , coffee tables , ect… mostly for family or my wife .. lol … just a hobby for me … however …. I plan to make a walnut/ epoxy table one day so your videos have been incredibly helpful to me ! Please continue to make these tutorial videos ! Thanks again from a fellow woodworker down here in the great state of Tennessee ! Keep up the incredible videos ! God bless !
@brendaharvey8471 3 жыл бұрын
Cam, first off I love the table. Second, I know you have used Osmo in the past, which do you like better?
@BlacktailStudio 3 жыл бұрын
Liking Rubio better these days.
@stephenrobinson8250 Жыл бұрын
Cam! I just bought a buffer like yours. What specific pad do you use to buff with? Do you throw away the pad after each use or do you reuse them? If you reuse them, do you do anything special to them for storage? As always, love the video. You never disappoint.
@stuart6478 4 ай бұрын
Read the instructions
@dr.emilschaffhausen4683 2 жыл бұрын
Walnut and maple. My go to woods, especially in burl! Beautiful table. Thanks for your hard work.
@brianl9740 2 жыл бұрын
Hello Cam, I’m just finishing my first live edge desk, thanks to your great videos here it’s going to be lovely. I purchased the slab from Art in Sisters and he referred me to your videos as I was a complete neophyte in wood working. One suggestion I might offer from my experience is I would use black caulk next time. I did follow your instructions to use mold release for my very porous slab, with good results. But I noticed hairline white caulk nestled in the fibers. I used a razor pen blade to get out as much as I could. On my first coat of Rubio the little hairline caulk pop’d to become visible. I think a black would blend in better and resolve this issue. You’re great and I truly enjoyed all the many videos of yours I’ve watched.
@jeffhermenet144 3 жыл бұрын
Cam, you're really selling me on this Rubio Monocoat I may have to give it a go. One thing I would be curious about if you have a smaller piece to test on - how does it hold up to some heat? I'm looking to build a kitchen table for a friend in the near future, and lets say someone sets down a plate that has some hot food on it, or maybe someone set something down on a pot holder that was too small and transferred some heat. Could be an interesting comparison!
@BlacktailStudio 3 жыл бұрын
I’ll add it to the list!
@utube1818 3 жыл бұрын
I can't comment specifically on Monocoat, but can say as a French Polisher / Sprayer of 30 years I would not trust any oiled finish to hold up against the heat or general wear and tear a kitchen table top has to withstand. I use either a 2 pack acid catalysed lacquer or a two pack polyurethane, both are spray applied and both need the correct type of mask. But they will withstand more than just a hot plate, my own table has been done with PU its over 10 years old and the finish is perfect.
@jeffhermenet144 3 жыл бұрын
@@utube1818 Awesome thank you for that information!
@foxyepoxy602 2 жыл бұрын
@@utube1818 Agreed. I use Rubio Monocoat mainly for wooden doors. Mainly because the finish will not peel off over time in a snowy climate. You can sand, and refinish it without having to strip the finish. Lacquer or catalyzed Polyurethane for table tops
@markives4642 Жыл бұрын
Cam you only sanded the black poly 220 the next video i watch they will sand thr river to 300O grit ?
@filofoxrocks 3 жыл бұрын
Cam, the finish looks great! I excited to try it out myself. For me, it's the first time trying out RMC after years of Osmo. What grit does the maroon pad have, which you use to sand in between the coats? Cause I'm finding different 3 grits for maroon pads: 120/150, 180/220 and 320/360...
@jamesmatthews1865 2 жыл бұрын
I prefer having your narrations. With you explaining what and why you're doing somthing, . . . I too, can learn! Keep up with your videos as you have. I won't ever complain!
@TOXICSHARK35 2 жыл бұрын
It’s amazing to have the quick bulletin points at the end! Thanks Cam!
@thomasblake7672 2 жыл бұрын
Cam, great video. Always enjoyable to make it to the end. In your Osmo videos you sand to 320, but Rubio only to 180. I haven't ever stopped at 180 and applied finish on any previous tables - how does stopping at 180 affect the look and finish of the epoxy? If applying Rubio, should I sand the epoxy to 320 separately and the wood only to 180? Thanks in advance.
@manchannel6900 Жыл бұрын
Rubio recommends 150max.. howd your project turn out?
@thomasblake7672 Жыл бұрын
@@manchannel6900 Turned out great - daughter loved her table. I ended up at 180 on the wood and 320 on the epoxy and looked pretty good. Can't decide whether I like the Rubio Monocoat finish or Cam's easy gloss finish better, but I guess each has its place.
@olegx.8173 6 ай бұрын
@@thomasblake7672 have you had any issues with Rubio bonding to epoxy? Rubio reps claim that their oil bonds only to bare wood.
@willjennison673 2 жыл бұрын
Cam tomorrow my son and I are taking some spalted maple we cut and milled to the kiln.!when we get it back your videos have given us the courage to try our first table. So thank you!
@unclebob8746 3 жыл бұрын
Cam, just found you. Great videos; love that you talk through the process and NO music. Subscribed.
@rhinopaul115 3 жыл бұрын
Cam Test the finish with slice of hot pizza on a paper plate. Never fails to leave marks on my table
@BlacktailStudio 3 жыл бұрын
Oh, good call!
@petert3355 3 жыл бұрын
@@BlacktailStudio Cold beer without a coaster is another test I do. It will also usually show a mark.
@kennetha.goodwin336 3 жыл бұрын
I thought if you allowed the Rubio to cure for a week that it wouldn’t leave a water ring if you wiped it up and waited 10 minutes for the remaining dampness to evaporate.
@Delta-tg9ge 3 жыл бұрын
This one comment triggered my OCD
@patokane1430 3 жыл бұрын
Cam, absolutely love your work and your videos. One thing I’m not clear on. Do you sand the top to 180 grit as you did on the table bottom or do you go finer? Thanks. Keep the videos coming.
@The_Ol_Bizzaroo 2 жыл бұрын
Cam, I'm wondering what type of surface to put my slab on so that when I flip it over, to do the 2nd side it doesn't stick or ruin the finish. Also, how long to wait for it to dry before flipping it for the 2nd coat. Thanks!
@gsallis85 2 жыл бұрын
What surface did you use in the end?
@The_Ol_Bizzaroo 2 жыл бұрын
@@gsallis85 haven't done it yet. I'm pretty reluctant to do both sides at once. My slabs are well dried and have acclimated for 2 months. I think I'm going to do the bottom and then flip it over the next day and do the top
@brianlynch5896 2 жыл бұрын
Have you ever tried Rubio on olive wood
@georgebeauchemin6076 2 жыл бұрын
great work! I love the this look with this product! I dont usuall water pop till the last grit. Have you found that water popping in between all grits is better??
@buckboy1234 2 жыл бұрын
I have done it using small plastic triangles so the table sits on the points. No issues. it's on the bottom anyway
@garrettjones8017 3 жыл бұрын
Every single video I've seen of yours has been the most beautiful work. I'm an amateur wood guy but I came across a beautiful slab of black oak and this gave me some inspiration!
@BlacktailStudio 3 жыл бұрын
Oh awesome. Good luck!
@bowtietech1757 2 жыл бұрын
Cam, watched my first Black Tail video tonight! Loved it! Your ingenuity, artistry, & attention to detail is amazing! To answer your question, the perfect size is determined by either the customer, the purpose, Orr the material.
@bowtietech1757 2 жыл бұрын
A video is art. Art determines its own dimensions. when it's finished, it is what it was supposed to be.
@GJ11598 3 жыл бұрын
When you say you immediately flip the table, do you put anything underneath so the already finished side isn't compromised?
@BlacktailStudio 3 жыл бұрын
A couple soft pads to elevate it some. Good question!
@brianwolfgang9312 2 жыл бұрын
Could you elaborate on the pads? Thanks in advance!
@gabrielc6252 3 жыл бұрын
6:43 wow, those legs ... is it stable, being that it is so top-heavy?
@BlacktailStudio 3 жыл бұрын
Super stable actually
@kapilkohli7773 3 жыл бұрын
Cam really want to understand all the finishes it’s getting complicated can’t wait for the finishing video. How does rubio works if you sand it over 400grit?
@ChristopherWilley1 3 жыл бұрын
yeah those legs are actually my favorite part of the table, I would love a dedicated video on just those legs and how you connect them all together
@CustomWoodCreations 2 жыл бұрын
Cam, great video! No question this time just appreciate the master class you always give!
@herbertaparicio9108 2 жыл бұрын
I really enjoy your videos and always learn a little new trick to apply or save in my “toolbox” for my own projects. As a woodworker I never stop learning from other craftsmen. Thank you 🙏
@robcall123 2 жыл бұрын
Absolutely beautiful piece. Can’t say anymore than beautiful. Love your videos.
@pattil7947 2 жыл бұрын
CAM! Omgoodness! Such gorgeous tables you create! Such Art oh, so Beautiful! All your tables! You do a great job taping your videos & great editing also! So generous of you to show all your tricks of your trade! Thank you! Your Awesome Bro! 👍👍👏👏👏👏❤️🙏👋😁
@skidave74 2 ай бұрын
Cam, thank you for the thorough demonstration. Working with this product for the first time, it’s going to finish a custom handrail for my basement renovation, plus a few other details. Using mahogany and should look amazing once completed. Thanks for the inspiration as always!
@vangiefich 2 жыл бұрын
Your tables are so gorgeous! I love the wood/ epoxy combination.
@dabralankit 3 жыл бұрын
Cam, you are terrific. I have read people recommending you to talk less but trust me its your instructions that keep it interesting throughout. I like watching woodworking videos & fine your the best. You are inspiring me to try something on my own. Way to go man. Cheers!
@BlacktailStudio 3 жыл бұрын
Thanks, and good luck with your endeavors!
@joepsterk5176 2 ай бұрын
This is really helpful! Love your transparent and honest approach. Keep it up!
@DevilsChild87 3 жыл бұрын
I love glossy tables but there are some that look great just like this one and how this turned out. Beautiful turn out.
@rical1 Жыл бұрын
Cam, thank you so much for this video! Awesome tips! I was less than thrilled with the first coat on mahogany desktop. Applied techniques and am blown away! Catch you on your next vid. Bob
@willgould9739 4 ай бұрын
Cam, thank you for 2nd coat technique. My walnut table was not quite there after the mono coat. I debated leaving it. Glad I did coat 2. Cheers.
@mikeg127 2 жыл бұрын
Cam, excellent video. I’m about to do this tonight on my epoxy table project. Thanks
@dantwomey 2 жыл бұрын
Cam, perfect explanation and perfect finish. Well done!
@NEOFROMTHEMATRIX100 2 жыл бұрын
Just did my first table top ever, with one coat rubio, maroon pad, then a second coat. Came out fantastically. Thanks for the video Cam, this made me a table that looks like one on your website for 20k.
@BlacktailStudio 2 жыл бұрын
Love that Brian!
@JeDxDeVu 2 жыл бұрын
Really like this finish looks great and great tutorial on how to use it. I'm a carpenter from Germany and lots of Carpenters here use a oil called complex hartwaxöl for their masterpieces when they become masters. It's super liquid, very easy to apply non flammable and I've never seen a better finish. It's made by a small company in Austria Tirol. They did a presentation at our carpenter school and it was pretty impressive. Cheers from Germany
@stephanelarose9165 Ай бұрын
CAN - WOW! As being a rookie that is about to start doing epoxy, to my opinion you said it all. thanks
@jacobharris2957 2 жыл бұрын
sheen and finish look incredible... looks perfect
@GritAndGrainNI 9 ай бұрын
Hey Cam, just wanted to say thanks for this video and in fact for all your videos. This one has in particular been so helpful for me and I really appreciate it. Honestly I don’t understand why you get any of the negative comments you get, I guess there are some folks who just have to take it out on someone right! But it has been so helpful to me the way you are very honest, mostly about your mistakes, it encourages me greatly 😂. I used to build guitars for Lowden guitars for 12 years and play music full time, but recently I have started my own little workshop woodturning and I’m trying to get into building more things with wood and epoxy resin. I recently subscribed to your channel and have been really enjoying all your videos and learning a lot from you and your willingness to share all that you do, so thank you so much. 🙏🏻 I haven’t had the courage to put my own KZfaq videos out just yet, I’m still just using instagram reels, but I’m working on it. I plan on signing up to your epoxy resin table workshop, so looking forward to that. Thanks again buddy. Hope this encourages you today. Blessings Wes
@stevevaneerden2365 Жыл бұрын
Cam - first video I’ve seen from you. Immediately Subscribed. Making a Sweetheart then Kitchen table for my daughters wedding out of walnut. Going with Rubio Monocoat for the first time. Your video has been very instructive! Thanks.
@robertm348 3 жыл бұрын
Cam -- Great finish! Will be my new "Go To" finish.
@goldcarps 2 жыл бұрын
Cam even your video is a work of art. Thanks for making them 😊
@dabralankit 3 жыл бұрын
Cam - i have watched a lot of your videos. You are doing a fantastic job from video, photos, woodworking to the way you talk, instruct, recommend. Keep it up mate!
@BlacktailStudio 3 жыл бұрын
I’ll try!
@ggreene245 2 жыл бұрын
Perfect sheen, beautiful table. I love Walnut. One of my favorite species.
@larryshipman248 3 жыл бұрын
cam thankyou for finishing video with rubio . Always wondered how you got these amazing finish.
@brazilsurf Жыл бұрын
Cam, first of all thank you for sharing your experience with the product and great video. I am actually with Rubio Monocoat USA.
@kelllylipp1041 21 күн бұрын
Thanks Cam. Long time working with live edge juniper and trying to up my finishing game. I'll be hammering the blog and vids. Thanks and no need to reply or comment
@j1303901 3 жыл бұрын
That is one of the best looking slabs I have ever seen. Great job!
@BlacktailStudio 3 жыл бұрын
Thanks jake!
@ajgros5248 3 жыл бұрын
Cam... Thanks so much for the finish lesson. Getting ready to do a pecky cypress live edge river table and still trying to figure out what finish I want to use. Everything is clear as mud now... LOL... Thanks for the great content!
@ahujeffrey 2 жыл бұрын
I actually like the look of the matte black. However, the final final was certainly outstanding!
@debbiewilliamson7002 2 жыл бұрын
Cam, Super helpful info and blow off those naysayers. You're an excellent woodworker and I love your artistic talent.
@jimsegraves4447 2 ай бұрын
Cam, this table is beautiful!! I was searching about how to apply Rubio Monocoat and came across your video. I am thinking about using it for a future project. Thanks for sharing.
@thedutchmandave 2 жыл бұрын
Hey Cam. Great video. I have watched this a few times and have started using your methods with Rubio. My table tops have gone to the next level. Thanks for putting out great content like this.
@arkansasfasttrailriders9774 2 жыл бұрын
Cam what a great talent,, learning so much since I found your site
@paul11273 Жыл бұрын
Cam, this was the second time I have watched this video. Finally getting ready to make the plunge and Rubio, so I will probably watch it a couple of more times! Thanks for all your content.
@BlacktailStudio Жыл бұрын
I’m working on a new version of this video now if it helps
@paul11273 Жыл бұрын
@@BlacktailStudio sounds good! I'll be looking for it. Thanks for the heads up.
@JohnReslerpages Жыл бұрын
Very nice. Thing I like about this resin table is that it's predominantly wood. The satin, almost matte finish is elegant.
@cayerman1 2 жыл бұрын
Cam, Great video! We use Monocoat at my work on pretty much everything and it holds up great! We actually use a bees wax spray to freshen up pieces that are used daily and it looks great.
@joseflores5989 Жыл бұрын
Man that's amazing I wish I can be close to you so I can learn from you Your knowledge about those projects Amazing keep doing it for all of us
@frankwrino8577 3 жыл бұрын
Cam - No I dont have your workshop or your fancy tools but I just finished my very first table using your helpfull video. 100%. Thanks for sharing, keep the ego like that, we like it! 👌🏼
@BlacktailStudio 3 жыл бұрын
That’s awesome frank!
@mrlondon963 2 жыл бұрын
Such a beautiful piece, a work of art.
@mikepagliei426 Жыл бұрын
Absolutely beautiful. That’s a proud piece!!
@anthonyharvey3871 2 жыл бұрын
Cam, excellent introduction to applying Rubio Monocoat.
@bucknut6620 3 жыл бұрын
Cam, your videos are packed with info and your knowledge thank you
@BlacktailStudio 3 жыл бұрын
I try!
@adiringer1959 3 жыл бұрын
Cam, awesome video, love the table. I just got 3 small slabs for my first projects and will apply the techniques I learned from your videos.
@BlacktailStudio 3 жыл бұрын
Love that man
@donnadimeo 2 жыл бұрын
Cam, Thanks for sharing you knowledge and experience! I’m going to give this finish a try. I make jewelry boxes.
@mcmenz0388 2 жыл бұрын
Cam. This table is unreal. I love it.
@pthsdo 3 жыл бұрын
Cam, I really enjoyed your video... always so detailed. I've seen a few different videos on applying Rubio, yours has to be the best one, hands down. Like you said, sanding is key even though most of us despise the task... I like your sanding method (up to 180 grit) as opposed to Rubio's recommendation of 120 grit (I'm assuming based on their product usage on floor). Also, your two coat application makes a lot of sense, which is evidenced by your beautiful end product. Well done.
@BlacktailStudio 3 жыл бұрын
Thanks!
@carvinguglyfingers3610 2 жыл бұрын
Cam, Deadpool! Perfectly explained video like always. Thank you.
@iN2ITOracle 3 жыл бұрын
Cam, thanks so much for sharing all this! I’m about to embark on making my first epoxy counter so am utilizing your videos and website to help it be a successful venture.
@BlacktailStudio 3 жыл бұрын
I hope so!
@MileyO Жыл бұрын
Hi! Cam. Needed a lesson how to use Rubio monocoat. About to use it for a first time. I probably watched all your videos several times. Love your work.
@mrskwrl 2 жыл бұрын
Cam, I love your honest videos. That's all.
@bettinabarry8423 2 жыл бұрын
The finish on the table is perfect!
@mikereynolds962 3 жыл бұрын
Hello my name is Mike Reynolds I live in Canada, Ontario on Lake Huron I loved this video. I did a live edge table last year and used Rubio monocoat ( not sure of the spelling). Had never herd of it but caught a video by John Maleckie and he used it so I decided to give it a try. It turned out great it is the first project I have ever done the table is red elm and is 7’3” Long by 50” wide. Thanks for tour videos they are really a joy to watch
@BlacktailStudio 3 жыл бұрын
That’s great to hear mike
@josiahmccloud2366 3 жыл бұрын
So helpful. You are the man. Thank you for all your hard work on your videos
@BlacktailStudio 3 жыл бұрын
Thanks bud!
@dustydave9347 2 жыл бұрын
Cam, I love the look of that finish. Looks great!
Полярная звезда - Kuzey Yıldızı
Рет қаралды 1,2 МЛН
The Wood Whisperer
Рет қаралды 222 М.
Blacktail Studio
Рет қаралды 623 М.
Bourbon Moth Woodworking
Рет қаралды 668 М.