How to Finish Acrylic Pours With Epoxy Resin Like a Pro

No video

How to Finish Acrylic Pours With Epoxy Resin Like a Pro

Рет қаралды 15,823

4 жыл бұрын

Words can’t really explain how beautiful a thick, glassy layer of resin can make your paintings look. But wow! What a difference! As I explain in the video, epoxy resin does have a few drawbacks-it’s expensive, smells weird while it dries, and it definitely requires some practice before you get comfortable with it. But if you are curious and want to try something new, read Sara’s article, watch my video, buy a small amount of the stuff and give it a try. It is totally doable.
Continue reading blog post here: acrylicpouring...
*Get your free 5 Part fundamentals pouring course at acrylicpouring...

Пікірлер: 36

@sandrabarrett-hoomani4822 6 ай бұрын

Resin can be applied using gloves hands. This will save a paint brush. Also, a heat gun can be used to remove all the tape from the back of the painting when it has dried resin drips.

@browntroutfisherman 2 жыл бұрын

Thanks for de-mystifying 2 pack expoxy finishing of acrylic paintings/poures. Your explanation was very clear. Now i`m going to give this a try on some acrylic pour coasters.

@gimlee44222 3 ай бұрын

You’re the man!

@alexg5513 4 жыл бұрын

Brilliant tutorial, thanks so much 👍

@terribarton8094 3 жыл бұрын

you explained so many things i was doing wrong but you covered all my issues to correct and make a better acrylic painting.

@mwsugg692 2 жыл бұрын

Thank you for this very informative video!

@sushigilmour9336 4 жыл бұрын

Great tutorial, thanks. I've seen people use their gloved hands to spread the resin around but I'm assuming you prefer the brush method. Have you finished larger paintings this way? If so, do you find the resin sometimes pulls away from the edges and sinks towards the middle?

@kathyeatonpourpaintingsort1241 4 жыл бұрын

Please please please use VOC mask every time you use any resin, even if it doesn’t smell. Even if you are outside or with perfect ventilation. Research this and promote safe practices. Thank you very much for your tutoring.

@MegaSteveshaw 4 жыл бұрын

Kathy, You are absolutely right. Sometimes I'm a bit too cavalier - you should wear a mask. Thanks for the reminder. Steve

@Nathalieroy2624 2 жыл бұрын

So helpful. Thanks a lot.

@hennagenix5740 2 жыл бұрын

It looks beautiful. Thank you for explaining it. Can you do gold leafing on top of epoxy like this one?

@timclayton8214 4 жыл бұрын

Thanks for this great video - do you find that adding silicon to paint affects the behaviour of the resin? Thanks

@carlosmurphy6870 4 жыл бұрын

Can you use a good quality sponge brush instead of a bristle brush to smooth out resin?

@celo456celo 4 жыл бұрын

Great Video. Just wondering, Can I use a heat gun as opposed to a torch or is it necessary to use open flame to heat the resin? Thanks

@joannagerace2657 3 жыл бұрын

My alexa jumped all over your question. LOL. Thank you for the video!!!! Great information.

@kathyeatonpourpaintingsort1241 4 жыл бұрын

Hint: when you measure square inches, add the two depths of each dimension also.

@suncoastcreationsbysheila239 7 ай бұрын

Can you lightly spray with alcohol v using a torch?

@tishagreyling7207 2 жыл бұрын

Thank you!!

@janebeatty6691 4 жыл бұрын

What do u recommend for coasters? I have tried sprays and art resin and glasses still stick to the surface. Enjoyed your ‘how to’ video.

@Dita66 2 жыл бұрын

I had same problem. After pouring I do 2 layers of glitsa for furniture. That works great. But Glitsa is the name in Dutch.

@peachpiano 4 жыл бұрын

Really clear, if you don’t mind the pun!😊

@MegaSteveshaw 4 жыл бұрын

Ha! That's funny. I try to be transparent whenever I can. ;) Steve

@susanweidman3525 2 жыл бұрын

Thanks for the video. I really appreciate you showing us how to do it. I want to try it on a 15x30 canvas and a 20x20 canvas. Do you have any tips for using this on larger canvases? How would using a large foam brush work? Also, I live in the desert. My garage is about 80-85 degrees. Will that be a problem? Thank you so much.

@Dita66 2 жыл бұрын

On a big canvas isn’t not great. You can better use an mdf of panel for resin.

@dalialovesdoggies4361 2 жыл бұрын

water and paper towel won't ruin it? is it acrylic pouring?

@patriciakuster2927 Жыл бұрын

Nice

@mandyhall1674 4 жыл бұрын

Great video thank you. What do you use to clean your brush please?

@MegaSteveshaw 4 жыл бұрын

Hi Mandy, no brush cleaning at all! Throw that thing in the trash! Once the resin kicks that brush will become as hard as a rock. That's why I use the cheap brushes like you can find at The Dollar Tree. I wouldn't waste money on a good brush because with resin, it is a one use only situation. Hope this helps, Steve

@mandyhall1674 4 жыл бұрын

@@MegaSteveshaw thank you for taking the time to reply. Have a great day :)

@blenkinso 3 жыл бұрын

I have resigned my large painting. Can I paint over again in parts then re resin to give a 2d effect.

@heatherfoster4154 3 жыл бұрын

My epoxy resin coating keeps fish eyeing over Pours with cells. Is it just that it is accentuates the cells or is there some other reason. I have cleaned the canvas's with warm soapy water and allowed them to dry. Any suggestions please. I scraped the resin off before it started setting which is frustrating as its not cheap.

@Dita66 2 жыл бұрын

Use anti fat. Maybe for cleaning you’re oven or kitchen. Or the stuf before you are painting the outside of your house. After that you can use water for extra cleaning.

@nancylacivita6494 4 жыл бұрын

What brand epoxy do you use?

@MegaSteveshaw 4 жыл бұрын

Hi Nancy, I usually go to BestBartopepoxy.com because their prices are good and they throw in a nice kit with buckets, gloves and a mixer that fits in a drill for free. But Amazon also sells good stuff too. Steve

@nancylacivita6494 4 жыл бұрын

Steve Shaw thank you!