Thank you! I have a 2015 LR4 on which I was able to perform this retrofit, thanks to your video. This was far more helpful than the caption-less graphics in the factory documentation.

I really wouldn't recommend using a flat bit (spade drill) for enlarging the hole in the aluminium trim, there's a high risk of cutting yourself or damaging the trim. Cone cutters or stepped drills are designed for this purpose are not expensive and are much, much safer.

Very helpful video! If anyone had the same issue as me where some of the original Land Rover roof bolts were unusable/threaded etc.- you can remove the sealant around it and unbolt and replace with AYR500061

Brilliant videos... Thank you!

Thanks for the video guys helped a lot

Can roof rails be fitted without discarding the channel trim?

Nice video, but a word of caution: I managed to promptly break one of the bolts because there is some black plastic sealant of some sort in the holes, partially filling the threads. If you did not have a roof rack on previously, the bolt holes may contain this gunk. I haven't solved the issue yet but I will try cleaning it out with a tap. If you google around in the forums you can find others have hit the same issue.

and you do all the key detail as usual

Love the vids

My LR4 2013 does not have any roof rails currently and I have a pair of standard that I'd like to install. Does installing the standard also require cutting the metal strip that runs the length of the roof gutter?

The trim strip is stainless, use a stepped cutter for enlarging the hole. If you have one, a Dremel with a cutting disc is good for cutting the strip or tidying it up after sawing.

When hacksawing, use all the blade......sheet metal should never be drilled using a flat wood - bit, a hole-saw should be used.

Can you tell me the size of the channel in the roof rail? Wondering what size channel nuts will fit it.

Hi - I'm hoping you (or anyone) can help. We have got a short rail with the bars but we have no instructions and I can't find any online. We can't find any bungs in the trim to fit the rail to (I assume thats what we are meant to do?). Are we supposed to drill these or does the short rail fit in place of the trim? The screws in the car are 10mm so I guess they don't fit through them? Although in your video they look different on top to ours?

Hi ✋🏻 ... what can I fix or put on that extended roof rail ! I mean for example I’m looking for movable light arm to tight it in it . How I can use it properly ? Thanks

Can the trims be left in place

What after market rails do you recommend?

Hi, great video, any idea what size are the bolts that screw in to hold the rail on? Cheers James

Hey Nice video! I followed the video but I broken the plug. It is really hard to get it out. And one of the hole is seized. Any ideas? THX

Any idea how to lift up the front cap on the extended rails once you have them installed? My disco came with the long rails and I need to get the front cap off to slide some cross bars in.

Whats the partnumber for the extended roof rack rail?

excellent thank you but must say it took me more than 20 mins a side alone

My disco does not have the bungs to remove to take the rim off do you have any advice its a disco 3 2005

How thick is the spacer does anyone know??

Misschien een stappenboor gebruiken ? Vlinderboor is voor hout.

I've never seen a Disco 3 or 4 without sun/moon roofs. That must be an Euro offered option

I have huge problem with mine - the roof glass was apparently replaced in the past, and whoever did it - did the poor job, as it is not centered! Now one of the roof railings does not fit in the groove... I wonder if there is a way to fix this without removing the roof glass (which is very $ labour intensive)

Can i mount them on a 2015 disco 4 without rails?

Great video! I have just got a set of extended roof rails for my D3. Would you have a video on how to remove the genuine LR spotlights? I need to remove them to fit some LED versions but buggered if I can figure out how to remove the bloody things! Cheers Peter

Is there a chance you can explain how to remove the rail?

How much weight can you put on these racks?

where do you buy that extended Rails ?

I am reading a brochure of Land Rover Discovery, they said i need to have Ditch finishers and Alpine light kit to fit roof rails and cross bars. I dont know what these things are. Can you help to explain me a bit. Some photo would be very nice. Thanks a lot. (page 120 in this brochure www.landrover.com/Images/Land-Rover-Discovery-Brochure-1L4621810CC0BXXEN01P_tcm281-407416.pdf

Who is your camera man? He is terrible... There are so many parts of this video that he is just recording the window instead of what's happening on the roof. And.... this is a Roof Railing System not a Roof Rack / Cross Bar.