How to fit Stair Parts #1

No video

How to fit Stair Parts #1 - Newel Posts

Рет қаралды 45,826

Күн бұрын

In the first episode of this series I'll be fitting the newel posts showing you how I set them out prior to fixing in place and the tips I use to help me do it on my own.

Пікірлер: 29

@The_lefthandedgolfer 9 ай бұрын

Been racking my brain about how to get a newel post at the top of my stairs. I’m a chippy by trade but been off the tools years - going to give this method a go! Glad I stumbled across this - was going to do a floor to ceiling on the landing, which I know I wouldn’t like the look of!

@marcussmith289 Жыл бұрын

Great video thanks

@meandyou917 Жыл бұрын

😂😂😂the googly eyes 👀 at the downstairs post!!!😂😂😂😂 at 14:15

@MelbourneAlan Жыл бұрын

its crazy that you only had 1k subs at this point. its only 5 months ago. fair play for keeping at it. im sure that first 1k was a lot of work for only a small reward subs wise. 17.8k now. keep up the great work. at least the last chicken stayed in the shop. LOL

@mrabuilders6723 Жыл бұрын

😂👍🏻

@hiyes5221 Жыл бұрын

Nice work mate👍😎

@mrabuilders6723 Жыл бұрын

Thank you for your comment glad you enjoyed the video 👍🏻

@lacoste1245 Жыл бұрын

Just found your page, I’ve just brought my first house and have 0 DIY skills so as a brummie lad I might be dropping you some messages for some tips 😂

@mrabuilders6723 Жыл бұрын

No problem at all Josh happy to help where we can with an advice 👍🏻

@Angler_7 Жыл бұрын

Just came across your videos pal, spot on attention to detail is class top men, i would like to ask a question… have you came across a structural newel tied in from the top stringer up to the ceiling on a straight flight ?? If so is it safe to take out ?? Cheers pal, keep up the great content 👍🏼👏🏻

@mrabuilders6723 Жыл бұрын

Thanks mate but without seeing it I couldn’t say. If you wanna send a video to our email I’ll have a look but even then it’s gonna be hard to tell 😂

@Angler_7 Жыл бұрын

Will do thanks mate, im ripping out my first home and the landing is near identical to the video minus the ceiling newel i will send some pics thanks again 👍🏼👍🏼

@marcussmith289 Жыл бұрын

Can you make a video of the set up of where you are cutting to produce such neat work

@mrabuilders6723 Жыл бұрын

Hi Marcus. Thanks for the comment. I made myself an MFT table last year and have purchased some bench dogs and fences for it. If you look at any of the kitchen videos you’ll see it on there and coming up on a kitchen I’m doing now 👍🏻

@dannyg5158 9 ай бұрын

@mrabuilders6723 I'm not sure if the original poster meant what i thought he did but is there anyway you can show you scoring the plaster that was left high, how you found the high spot on the floor to level the plaster to (assuming the window board is meant to sit proud x amount of mm's so this info would be handy to know inorder to know how much offset above the floor level to cut). What you used to mark the level line and what tools you used to score and actually cut the level line so cleanly. You do great work and awesome videos but i usually have questions as it seems to go from A-C on things you likely do as second nature. For a novice like me it would be amazing information.

@Kevin-tk9tr Жыл бұрын

Why wasn't the newel post on the flight into the loft fitted in the workshop during manufacture it obviously needed a Newel. I note that that you said measure of the nosing I was always taught to measure of the pitch line (the point were the tread and riser meet if you trace the line of the riser through to the top of the tread. All in all though mate tidy job,nice one.

@billybulmer7386 Жыл бұрын

What was that sinister looking thing hanging on the bottom newel post? I think I may have asked you this before?- did you do your time as a joiner? Another cool vid guys👍

@mrabuilders6723 Жыл бұрын

Hi Billy and thanks for your time as always. I did mention this in the video but I did my city and guilds apprenticeship in carpentry and joinery so Ive continued in both fields but I just don’t manufacturer joinery items anymore it’s not cost effective. My favourite has got to be traditional cut roofing and loft conversions. Glad you enjoyed the video 👍🏻

@billybulmer7386 Жыл бұрын

@@mrabuilders6723 thanks for the reply. I’m looking forward to the next one already👍

@mrabuilders6723 Жыл бұрын

Not long to wait Billy, it's going on tonight!

@KEIRAN1996 Жыл бұрын

Good work buddy,what is the bit set you was using looks a good set I could do with

@mrabuilders6723 Жыл бұрын

Hi Kieran the bit set I was using is from Amazon. The link is below for you. You’ll notice it comes with an extra sleeve to put your own bits in so I added countersinks etc myself. Trend SNAP/HD1/SET Snappy Drill Set - 16 piece, Black amzn.eu/d/gjKFZx0 Thanks for watching 👍🏻

@KEIRAN1996 Жыл бұрын

@@mrabuilders6723 thankyou👌as a joiner myself I'm always looking for things to make life easier. I've been through and watched every video on the channel and will carry on doing so👍

@amazing451 Жыл бұрын

Is this video from the loft conversion job?

@mrabuilders6723 Жыл бұрын

Yes mate it is. 👍🏻

@briansutherland5414 Жыл бұрын

Do used d type glue as it expands

@mrabuilders6723 Жыл бұрын

Hi Brian. I don’t use expanding glue on stair parts especially oak because it’s a lot harder to clean off but I do use a D4 glue for better bonding strength 👍🏻

@briansutherland5414 Жыл бұрын

@@mrabuilders6723 mastentape round bottom of timber it easy clean off help full all small gaps ta brian