How To Fix A Broken Bumper (LB/RB) | Xbox One Controller

How To Fix A Broken Bumper (LB/RB) | Xbox One Controller | Xbox Repair DIY

Рет қаралды 1,309,157

9 жыл бұрын

In this video, I will show you how to repair a broken left or right bumper on your Xbox One controller
There is always the potential that something can break on an Xbox One Controller. One of these items that can break quite easily is the Left Bumper (LB) or Right Bumper (RB), aptly named the bumpers on the Xbox One Controller. When the bumpers on an Xbox One Controller break, it requires opening of the controller (watch my videos on how to open an Xbox One Controller here: • How to Open and Reasse... ).
Once you can open the controller and access the buttons it is a lot easier to fix.
There are two potential ways to fix an Xbox One Bumper when it breaks. You can either buy new casing or fix your Xbox One Controller bumper by gluing the pieces back together. Depending on the condition of your button, you can go with either one.
Here is how you can repair a bumper that has broken by using Super Glue or Gorilla Glue.
Replacement Xbox One Controller Buttons: amzn.to/2eJOwgB
Xbox One Controller: amzn.to/2fb4AfD
Xbox One Controller (Elite): amzn.to/2eUtcFP
What You'll Need:
- A broken Xbox One Left Bumper (LB) or Right Bumper (RB)
- Super Glue
- Patience
What You Need to do:
Step 1: Remove the broken bumper from the Xbox One Controller. Don't know how to open a controller? Check this out:
Step 2: Remove the broken bumper piece from the Xbox One Controller
Step 3: Put super glue on top of the area where we will connect the bumper and the broken piece of the bumper
Step 4: Slowly place the broken piece of bumper on the glue
Step 5: Hold the glued piece in place for 60-90 seconds
Step 6: Place a very thin layer of glue around the outside of the cracks to secure the piece in place (see tip below - don't put on too much!)
Step 7: Allow to try
Step 8 (optional): Test!
Tips and Tricks:
- Don't put too much glue on the broken bumper piece as this may prevent the piece from fitting back into the controller
- Make sure the super glue has plenty of time to dry (10-15 minutes after you hold the piece together)
- If you're looking to get a new color controller, this is a great time to do it. You can buy tons of cool controller cases here: amzn.to/41BUFn9
- Be careful with super glue. There is a reason it is called Super Glue!
- You can test to see if your bumper is working by putting on the circuit board with the LB and RB bumpers and the front of the shell. Clip on the bumper and you should be good to go!
Have a question about one of our videos, articles, or another Xbox-related repair or issue? Send us a message by visiting xboxdiy.com/contact
Xbox Repair Videos:
• Xbox Repair Guides, Tu...
Xbox One Controller Repair Videos:
• Xbox One Controller Re...
You can find more Xbox-related repair guides, troubleshooting, tutorials, news, reviews, and other content on our website:
- Xbox Repair: xboxdiy.com/repair-guides
- Xbox Tutorials: xboxdiy.com/tutorials
- Xbox Troubleshooting: xboxdiy.com/troubleshooting
**XboxDIY.com and the XboxDIY KZfaq channel use affiliate links and referral programs as a way to support the ongoing costs associated with running even a small media outlet. Please consider purchasing something from a link in one of my videos or from our Buy Me a Coffee page as a way to show your support. More support means more content. Thanks for being a watcher and subscriber!

Пікірлер: 1 200

@Zm4rc0 7 жыл бұрын

For people who have a LB or RB that clicks, but only works if you press it way too hard:

@AEGIS_Dustz 4 жыл бұрын

As someone else has already said, if you have a bumper and you have to click really hard to use it, here is the easier solution.

@loniak1839 3 жыл бұрын

mine just fell out mid game xD quality stuff here

@-Meatwad 8 жыл бұрын

what a junk design for a bumper. the Xbox 360 controller wasn't perfect but all six of mine still have functioning bumpers, while my two Xbox one controllers both have broken ones within less than a year of use. shame just a shame

@jacobm8242 8 жыл бұрын

My bumper came off by itself. More specifically the LB. I can slide it in and use it, but it comes out very very easily if I'm not holding it in place. Any suggestions?

@OffhandDelivery 6 жыл бұрын

what genious engineer decided to build a button that is pressed by a tiny cheap thin piece of plastic?? a genious engineer who wants you to buy shit...over and over again...

@DidactOfDeath 8 жыл бұрын

I hate the Xbox One controller, these things are a pile of shit. I've had 3 controllers and the Right bumper for me always comes loose. Never had this problem once with the 360 controller.

@gabrieldecastro8664 8 жыл бұрын

Amazing, I couldn't find any helpful videos. You've earned a sub :)

@Zangetzu419 8 жыл бұрын

I'm not entirely certain if the Right Bumper I have is broken or not. In order for it to work, it occasionally requires a little force to be applied to it.

@randylahey5107 8 жыл бұрын

Yths helped me a lot thanks

@hnsgamer4987 6 жыл бұрын

You sir, deserve an Xbox Medal of Honor!! Thank you so much!

@haydenstarkiller4708 4 жыл бұрын

You just saved me a lot of money and pain. Thank you!

@idivinities 7 жыл бұрын

my bumper didn't break, it just simply came out its still all intact

@Sgt_Death78 7 жыл бұрын

These Xbox one controllers are some of the cheapest things I have lost 2 of them in 2 years

@mrbushidon7140 7 жыл бұрын

thanks bro this was the exact problem, good stuff my man!

@yupthatsme214 8 жыл бұрын

Dude exactly what I needed to see! Thanks man! Keep it up!

@danielpavlides3753 4 жыл бұрын

2:18

@SpartanRepublic 7 жыл бұрын

Hey can someone help me on how my elite controller LB button is in tact like I can press it and everything, but when I do it does not register sometimes and I have to press it hard to register> If any responses thanks!