HOW-TO FIX A HARD TO START Lawn Tractor with OHV Briggs Engine

HOW-TO FIX A HARD TO START Lawn Tractor with OHV Briggs Engine - MUST SEE!

Рет қаралды 638,560

Күн бұрын

HOW-TO FIX A HARD TO START Lawn Tractor with OHV Briggs Engine - MUST SEE!
Is your tractor hard to turn over and only spins with the spark plug out? Then you MUST WATCH this video.
This procedure will apply to many lawn tractor with an OHV engine.
Valve cover gasket is part #272475
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a beer!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my Small Engine repair videos be sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZfaq and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZfaq to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #smallenginerepair #how-to

Пікірлер: 608

@donyboy73 4 жыл бұрын

TRY THIS BEFORE BUYING A NEW BATTERY FOR YOUR LAWN TRACTOR!

@45-_-45 4 жыл бұрын

donyboy73 can you use mm instead if you can what number would it be

@Thedar561 4 жыл бұрын

Hi I’ve a 15.5 hp one and it’s driving me crazy, original hard starting so fixed the starter and reset the valves, carb is clean new fuel filter and it’s starts fine now and revs out perfect, but once I put it into gear and release the brake it’s splutters and dies, Any suggestions before I set fire to it 😂

@patrickrussell4001 4 жыл бұрын

@@45-_-45 Yes, but you will just need to make the conversion from metric to imperial and vice versa

@jimmysapien9961 4 жыл бұрын

Taking the front end off it’s not a big deal just common sense, and if you have lights in the front you unplug the connector very simple.

@murdoc750 4 жыл бұрын

what if when turning the engine over by hand the valves don't open or close?

@nobs3075 3 жыл бұрын

Spot on. I replaced the starter, as I fried it trying to turn my B&S 17hp 2005/6 Z480 over. This happened over about six months as it slowly got worse. Put in a new starter and still had issues. I removed spark plug and the motor turned over easily. I put everything back together and it still wouldn't turn over. Shorted across the solenoid and it still wouldn't turn over. Disconnected the battery and attached(with jumper cable) to my truck battery to solenoid and still no help. Came into the house frustrated and watched a couple of useless videos. THEN, I found this one. Watched your video, checked the valves and they were like yours; 0.17, adjusted to 0.04 mils and bingo it started right up. I am the original owner, no longer frustrated and very pleased with myself, LOL. Thanks so much.

@rodfroelich5908 2 жыл бұрын

And as other commentors have said, I've watched many videos on this same content and in my opinion, yours is far superior to all in describing the issues needed. Very clear and precise verbage, no silly slang, and mostly, no unnecessary music in the background. Dony, your instructional videos are the best. Carry on sir.

@walter2990 2 жыл бұрын

Well I'll be dipped!! This was the first video that addresses a feller's issue with his JD lawn tractor, with OHV's! No one else even suggested this fix, much less a description about how to repair it! Stay thirsty my new friend, & I've become a subscriber!

@patrickflohe7427 2 ай бұрын

It does tell you in the manual, to adjust the valves, but a lot of shops / mechanics won’t tell you to do that.

@walter2990 2 ай бұрын

@@patrickflohe7427 I bought my JD mower used from a guy, with only 76 hrs on the meter, and he'd already lost the manual.

@rossfricke2010 6 жыл бұрын

I watch a lot of DIY videos and I must say this is one of the best well documented, explained, spoken I’ve seen in a long time ... great video !

@redwest76 6 жыл бұрын

This video was absolutely perfect. Spent an age trying to sort my mower out. This made it so simple. Thank you so much

@donyboy73 6 жыл бұрын

make sure you're subscribed

@dwaynecollins4974 4 жыл бұрын

I still don't know for sure is it the steel one on the bottom and the aluminum one on the top? And the top one was .04, but what is the setting for the other one? Cuz I've heard 3 on top and six on the bottom, four on top and for on the bottom, and now four for both of them; your videos are great Don but you didn't say what to set the bottom one at...🤔

@bbgdaddy5198 8 жыл бұрын

holy cow!!!! someone who actually knows how to only use a film of sealer and not a whole huge plop of it!!!! Great job Donny!!! I actually currently have this problem and will be using this fix.

@patrickflohe7427 2 ай бұрын

Sealant man….sealant.

@rcochran46 8 жыл бұрын

Wish all small engine mechanics had your knowledge Don! Thanks for the video.

@gregcox7477 7 жыл бұрын

This video was exactly what I needed. It helped me diagnose the problem and then walked me through the fix. Informative without all the "entertainment" so many of these guys feel the need to try to add. Perfect.

@donyboy73 7 жыл бұрын

thanks

@sergiofigueroa9705 6 жыл бұрын

donyboy73 hello donyboy73 this is a great video i wanted to ask do u go .004 of an inch on both the xhoust and intake valve or is there two differwnt #s

@patrickflohe7427 2 ай бұрын

I don’t need entertainment….I like his no BS type videos.

@acetech9237 5 жыл бұрын

You have the best explanation. I just did this and it fixed my problem. Turning it over by hand til the valve drops down was genius and a time saver

@zemdimdispeldseja7210 Ай бұрын

Thank you maaan! It was so easy! I've been struggling with this for 2 years, now it starts up almost INSTANTLY. and I did the fix without the soace measuring tool because I could not find it and was too excited to try this. THANK YOU AGAIN 👌

@scottfinlon2787 4 жыл бұрын

This worked perfectly on my dads John Deere with a Briggs and Stratton engine. $5 gasket to fix it is definitely way cheaper and easier than buy other parts or taking it to a shop to fix.

@acetech9237 5 жыл бұрын

You're awesome. I am an electronic tech. I don't work on small engine stuff typically but I just bought my first riding mower used and a month later this happened. I did the adjustment and it cranks easy thank you for your time

@askrob6846 Жыл бұрын

That scotch brite tip is awesome! Thanks for sharing.

@RobB-vz2vo 2 жыл бұрын

If you ever get out to start mowing and this happens, you can start the engine and complete your mow before you get around to adjusting the valves. Just rotate the engine anti clockwise until you get resistance, take the air filter off then either place your hand or a piece/block of rubber or anything over the air intake tube. Start the engine then unblock the air intake when it fires up. Replace the air filter and cover. I did this until I got around to adjusting the valves which was about four or five mows. The idea is it gets a run up before meeting compression while at the same time creating a vacuum by blocking the air intake which presents less resistance to starting.

@jimkelly4286 4 жыл бұрын

This is an exceptional video for adjusting valves. There is no need to find TDC if you open the opposite valve first as explained in the video. Also, if there are different specs for intake and exhaust valves, you can determine them by the type of rods used. The exhaust will have a steel rod and the intake an aluminum rod as you can see at 4:05. Aluminum or intake on top for this engine, steel rod or exhaust on the bottom.

@mikenaylor8578 3 жыл бұрын

Thank you for this very helpful repair guide. It allowed me to fix my 20 year old Sears Craftsman LT1000 42" riding mower's worsening problem. For years it was getting steadily worse and recently would not start. This great repair saved me from having to buy a new mower!

@a.j.schulz2108 4 жыл бұрын

Thank you for this video!! Had the exact same issue with a mower I just picked up from Marketplace. Tried replacing the battery, the ignition, the starter, and both fuel and battery solenoids. Nothing worked and I was ready to dump the tractor for parts. Fortunately, I found this video first! My valves had .022” gap and once I adjusted, the engine popped off on the first try. Very happy I finally found your video after hours of watching others suggest it’s just a bad battery. Cheers to you sir!

@fredtyler 5 жыл бұрын

Excellent video. Thanks for including the before symptom. Mine was doing exactly the same - very hard to turn over and difficult to start. Thought the battery was going bad. Took me all of 20 min to adjust the valves (10 min addressing the gasket). One of the valves was +.500 and the other was +.400; surprised it started at all. Set them to .004 and closed it up. Spins like new and fires right up. Many thanks!

@kaliko70 6 жыл бұрын

The only word I can think of is "fantastic!" Fantastic video, fantastic narration, and fantasitc quality of workmanship. Thank you for making this to share with us all!

@pumpkinpeanut1 5 жыл бұрын

I really enjoyed watching the way you explained how to adjust the OHV on that Craftsman! You do a great job of explaining in detail how to make those adjustments and I appreciate it! This is the best video I've seen on how to do this. Thanks for such a thorough job!

@kentkwwong 4 жыл бұрын

Hi Don, my lawn tractor had the exact problem and thanks to your video I am able to fix it myself and it is running fine now! Thank you so much!

@MazichMusic 4 жыл бұрын

After repeatedly failing to adjust my valves, I viewed this video and the engine roared back to life. The whole TDC bit is a waste of time. Thank you for making this fix so simple!

@vurtdafurk8659 5 жыл бұрын

Great video. My 18hp intek acted hard to start also. I waited a month for new parts to arrive (lawn looked awful). But after your video and 15 min, it fired right up good as new with the old parts. Wish I saw this video a month ago...

@augustodeasis5730 3 жыл бұрын

Excellent explanation and clarity. I like the valve setting based on the valve closed rather than the top dead center plus 1/4" . I have been doing the latter 3 times and has not solved the problem....Will definitely try this system. Hope it works.

@spelunkerd 2 жыл бұрын

In bigger engines the outer nut is the locking screw, and the inner nut is the adjustment screw. Is there a reason why the opposite is true for these small engines? Even years later your video is still the best resource for adjusting valve lash on small engines.

@deanrhodenizer938 4 жыл бұрын

Thanks. You definitely take more care than most with the quality of your workmanship. Nice work on removing the old gasket material to ensure a good seal on the valve cover.

@moesaleh9885 5 жыл бұрын

I be came a small engine mechanic after after watching this videos thanks a lot

@rjservices7402 8 жыл бұрын

If valve adjusting does not fix the problem than it could be a broken Spring on the decompression cam located on your camshaft. You might also probably hear some type of light knocking sound as well unless the mechanism has fallen off. Or a lobe could be worn down I suppose. Donyboy you may have seen this issue befor.

@robbyjones7631 6 жыл бұрын

RJ Services Sometimes the valve seat comes off and causes Excessive lash. Check the leakdown with the rockers off to check the rings and valves and head gasket. If an engine kicks back with the rope on a lawnmower, remove the plug and check to see if it kicks back while cranking. If not, it's the crank key. Check the blade if it's bent. A bad rope starter can cause kickback. Crank the engine by hand to see if the engine binds. A warped diagram can cause drag with the rope. Pull the plug and hand crank the engine. If it's smooth, replace the diagram or needle valve.

@mohamedalfalasi4428 8 жыл бұрын

your videos taught us so many things about fixing generators .. thank u man .. we appreciate every single video u have uploaded

@jimmarino4477 7 жыл бұрын

After a couple of years screwing around with the fuel and ignition systems, I found your video and after an hour in the garage adjusting the valve lash, man what a difference. Thank you so much for posting this vid and saving me a service repair bill or buying a new lawn mower.

@donyboy73 7 жыл бұрын

this is such a common repair!

@MrCountrycuz Жыл бұрын

This is a great tip that I will always remember should I ever need to adjust my valves again. I bought this YT3000 that had been sitting in someones yard by a yard seller and had to this because the engine could not get over the hill when starting up.

@mainman102 3 жыл бұрын

Just saved my back! I thought I was gonna have to push my pos into the back of my truck. But this got it to fire back up right away! Now I just need to reseal that gasket correctly once I get it back to my shop. Can't thank you enough!

@donyboy73 3 жыл бұрын

Glad I could help!

@Willy7212 2 жыл бұрын

Thank you. I watched a few videos on adjusting valves at TDC. I tried that and it's not correct as my 19.5 brigs would not turn over. I adjusted them your way and ran perfect. As a subscriber to your channel, I wish I had watched yours first. Cheers.

@FRBYND 4 жыл бұрын

That old dirty fuel when you say dispose of this old fuel is it ok to put into my neighbours car who is a nosey m f er??

@donyboy73 4 жыл бұрын

lol

@patrickflohe7427 2 ай бұрын

In the words of Arnold Takahachi, BAHAHAHA That’s some funny shit, right there.

@mrgourmet2421 4 ай бұрын

Followed your video and it completely fixed the problem I was having with my old B&S 15.5hp. Thank you so much!

@michaelciccone5507 4 жыл бұрын

Thank you so much! It solved a longstanding problem; my 2004 lawn tractor was getting more and more difficult to start over the years, to the point that last season, I had to jump start it from my truck, even after installing a new battery in the mower. Now my 2004 lawn mower starts easily! What I don't understand is I had a professional outfit look over my mower. They drove out to my house with a van full of tools plus a lift. Even though they do things like replace carburetors, they said they do not touch the valves(!) It turned out to be so easy to do myself, borrowing the tools from work, and doing it in my garage. Who needs so-called professionals? Thanks again!

@donyboy73 4 жыл бұрын

if they don't adjust valves they are NOT professionals

@michaelciccone5507 4 жыл бұрын

@@donyboy73 You got it!

@chesterj8076 4 жыл бұрын

absolutely brilliant.. exact same symptoms on my snapper 14hp.. followed this and she fired right up. Thanks

@Smalltechguy 4 жыл бұрын

Donny, I have gremlins in my Opposed twin 20HP Briggs. The whole tractor has been redone from the ground up. I purchased a wiring harness thinking new wiring should be utilized. I also wanted the safeties functioning again. The tractor was running fine and waiting for the proper seat to be mounted. Then a few days later the tractor does nothing. I even purchased a new solenoid and starter. All the brake safety and seat safety are new.

@markbuchanan4349 Жыл бұрын

After several months, I have become a firm subscriber into your channel on KZfaq. Reason why, you definitely hit a nerve with me. I have been trying to figure out why I have been constantly have trouble starting my LT1000 17.5. Not to go into details, but I searched and searched KZfaq for possible solutions. Well, you can figure out why I have subscribed to your channel. You, DonyBoy73, made my day by me watching your video. Thanks 😊!

@simpleman283 3 жыл бұрын

This is just what I needed to fix this used mower I bought a couple years ago. I was having a hard time tightening set screw without altering adjustment till I stopped using the wrench to keep the adjuster from moving. I held it with my fingers, that way I could see where it was and then I knew you do not need the wrench. I'm going to play this video and let the ads run from time to time to say thank you.

@donyboy73 3 жыл бұрын

I hope the video solves your problem!

@ShiversRSS 8 жыл бұрын

I just performed this procedure on the in-laws mower based on the instruction from your first video on this subject from back in the day. Thanks for the information.

@StevenFarmeronline 6 жыл бұрын

Great video! I'm fairly handy, but I've never adjusted valves on anything. Tractor fixed!

@barryjohns1965 5 жыл бұрын

I actually went through this exact thing and came in and your video was a great help. Went back out and adjusted the valves and now it is turning over great. Thank you so much.

@angelperezperez7546 3 жыл бұрын

Bro, God bless you. I did this to my riding mower and BOM!!! Start right away. I was about to give up. Thanks for the video.

@PapaMav 9 ай бұрын

Great trick on how to position the feeler guage.

@dagrote1 8 жыл бұрын

Glad to see someone jettison the orthodoxy of "top dead center" for valve adjustments.

@julies1ify 7 жыл бұрын

Thanks ! I had no clue what was going on, got a new battery & starter but I was barking up the wrong tree. Thanks again !

@Jimmynitr 8 жыл бұрын

I had the same issue, adjusted the valves was better but it had been doing it so long the starter was junk as well, replaced the starter now runs like new. Great video.

@obfuscated3090 3 жыл бұрын

Clean gasket surfaces do not require RTV style sealants, but a light wipe of Hylomar (non-hardening, Rolls-Royce use it on aircraft engines) works well and doesn't damage the gasket next rocker cover pull. RTV should generally be left to form-in-place applications with no gasket (modern auto engines are an example). RTV takes time to cure while Hylomar can be used on parts run immediately. Another sealant (there is no "sealant to rule them all") of great use is 3M Weatherstrip adhesive for parts you only separate at teardown. It's useful to glue a floppy thin paper style gasket to one part, let cure for a bit so it holds the gasket in place, then apply to the opposite side of the gasket and install. For covers I glue the gasket to the cover then grease the opposite side as paper gaskets swell slightly (vaseline works well too). These are all long-proven methods and I invented none of them.

@NoDeadlines 5 жыл бұрын

I just got a Cub 1170 with a 2-cylinder Briggs engine. Same symptoms - but once it does start, it runs great - good and strong. The only problem is starting - especially when it's warm. I have suspected an electrical issue, but now and considering checking the valve adjustment. Only 240 hours on this engine, but it sat, unused for a few years before I bought it and I don't know if the valves had ever been looked at - yet. Thanks for a great and informative video. I will subscribe. - Alan

@philliphall5198 4 ай бұрын

Best to adjust values once a year or two, seems to prevent the compression release from breaking also 😊😊😊

@justdon0135 7 жыл бұрын

I want to THANK YOU for your video. It led me in the right direction. I opened the valve cover and found that the exhaust rocker arm was flopping around (very loose) started to adjust it and found that the small cal on top of the valve stem had fallen off. The stud that holds the rocker assembly was very loose. Tightened it and adjusted the valves as you showed. **** started and is running like new **** Justdon

@scorby1 3 ай бұрын

Nice video same procedure worked on my craftsman Briggs and Stratton 16.5 hp right down to the tools….nice work Don!

@jamesgray5560 4 жыл бұрын

Don your video was right on time my mower was doing the same thing. My good friend and I went in and adjusted the valves it's running great thank you!

@BearE9090 8 ай бұрын

Great video. Had a similar problem, but the stud came loose.

@PapaMav 6 жыл бұрын

Don, let me say first that your vids are terrific and extremely helpful! When you first took off the valve cover, you commented that "it looks like someone was already in here already". It sure looked to me from your vid that whoever that was, mixed up the push rods; it looked to me like the top one, the exhaust spot, was aluminum, and the bottom one was steel, which is the intake spot. It's supposed to be aluminum for intake and steel for exhaust. Thoughts? Thank you.

@patrickflohe7427 2 ай бұрын

The length is different enough, that I don’t think it will run if they’re reversed.

@PapaMav 2 ай бұрын

@@patrickflohe7427 negative my friend: last season, I replaced a bent aluminum intake push rod with a steel one as both are the same length and tractor runs great. I have come across vids where that is what people have done with no problems, as long as you maintain the lash on the lifters. The steel push rod is much cheaper.

@allenmaxsom1773 2 жыл бұрын

Great explanation of how to resolve slow rollover of the engine thanks Dan

@brucel.6078 6 жыл бұрын

Thanks!!!!!! I have the same issue! Now I can fix it! 👍👍

@leonardjohnson7692 8 жыл бұрын

That is the best repair video i have seen .Beautiful job.

@tomycodd 8 жыл бұрын

I see this problem A LOT.Thank you for another great video!

@razijun5272 7 жыл бұрын

Thank you Donyboy. It is fair to mention that your videographer is a keeper. I love his camera work, and editing.

@donyboy73 7 жыл бұрын

THANKS, I DO IT ALL MYSELF

@budgillett9627 3 жыл бұрын

Mr Don you sir are one of the BEST on KZfaq. Always so informative and easy to see which is so important. I can’t learn much from the back of somebody’s head or hands. IMO old fuel and used oil mixed together makes good fire starter, Liquid Boy Scout, but obviously not something that should be recommended.

@razijun5272 7 жыл бұрын

I am totally impressed. Being a professional videographer, I understand the complexity of teaching, and filming, and editing in such a high quality. I admire your professionalism. Good luck with your future endeavors.

@donyboy73 7 жыл бұрын

thanks, you should come film a video!

@razijun5272 7 жыл бұрын

I would be totally honored to be a part of your production, I you live in Central Connecticut.

@j3red67 8 жыл бұрын

Don, Hi there. Had similar issues with my Troy built Twin 21 hp B/S engine. My valves did not appear to be nearly as loose as yours were in the video, however, with just the slight adjustment to all four valves all hard starting issues are completely gone. I have watched many of your videos and learned so much. Just wanted to say thank you for making great videos that are highly detailed. Thanks John Missoula MT.

@semco72057 7 жыл бұрын

That must be the problem with my lawn tractor as it is getting harder to start. My neighbor who works on small lawn equipment checked it and got my mower running, but I think that he or I will have to check to see if the valves need to be checked. Thanks for this tip and video.

@anthonygostling 5 жыл бұрын

I have to say, all your video's are very understandable.

@matthewkotara2264 3 жыл бұрын

That shit was crazy. I thought it was going to be expensive to fix my mower and then I found this video. Good job bud. Thanks for the help

@m715fm 5 жыл бұрын

Thank you for this video, it gave me the courage and knowledge to fix my tractor. I also found a bent pushrod on the bottom valve. I was able to straighten it and reuse it. The tractor is running great and it hasn't run this good in a long time.

@Leggeddude 10 ай бұрын

I love watching your videos I learn a lot my tractor is very very old but still runs and mows great

@donyboy73 10 ай бұрын

Great to hear!

@Leggeddude 10 ай бұрын

For winter I park my tractor in the shed remove the battery , but I fill it up with fuel whats the best additive to add to it pleas?

@richardamoors1704 3 жыл бұрын

Best video on valve adjustment I've seen, & @ least 2 of the other ones incorrectly identified the intake & exhaust valves!!

@beginnerbeginner978 5 жыл бұрын

Now I'm not scared or nervous lol to adjust my valves. Good video

@garywest3763 5 жыл бұрын

Thanks for the Excellent video, my B&S intek 18.5h.p. engine has the same High Compression and will Not turn engine over, So I guess it is time to adjust the valves.

@RichardWilson-sh3kr Жыл бұрын

Sir, I love your videos, neighbors mower is doing the same thing. But I think it’s the cam gear. Unrelated, I think the top valve is the exhaust valve and the bottom is the intake. You can tell by the aluminum pushrod. Cheers Just watched your video again. The aluminum push rod is on top…. His is an 18.5 horse intek, aka Briggs, it’s opposite. Mind blown.

@davidberry1379 3 жыл бұрын

good job..i've been doing TDC but i see where thats unnecessary now....my tractor had the same symptoms but it was a broken compression release on the camshaft that was the cause. Not a terrible thing to fix, although the engine did have to be removed. Re adjusted vales afterward using .005 for intake and exhaust, it starts right up now, no balking...

@donaldyounger3384 6 жыл бұрын

Great presentation. Nice and clear in explanation and workmanship. Thanks so much.

@craigrose6249 2 жыл бұрын

Excellent video Don i meet you several years ago.I have the problem that you just described thanks so much!

@MinhLe-vj9ij 2 жыл бұрын

Thank you. You have shown good works and I enjoy watching your very detailed works. Again, thank you very much.

@MrPedix2c 7 жыл бұрын

Thanks Donyboy73 for your video, while I have the engine manual for B&S it wasn't nearly as good at showing me what was needed to successfully adjust the rocker arms on my 2011 YTS3000 B&S 41877 engine, the technique you showed made it certain that the lifter/cam were certain to be on low spot for the adjustment. I was confident that it would work.

@coltain 8 жыл бұрын

9:40 this is a nice professional rag :)

@derek876544 4 жыл бұрын

looks like grannys drawers

@stevenxcel7841 7 жыл бұрын

Thank you so much. This is exactly the problem I'm having!

@vetterfellow 2 жыл бұрын

Good learning curves for Me DB73, Good day champ !!.

@ontariohvac 8 жыл бұрын

Outstanding as usual. It's not just the tech work, it's the video work too. That is another skill. It's not easy to get a good video.

@donyboy73 8 жыл бұрын

thanks, I live in Ontario too

@alfredocoleman7989 3 жыл бұрын

Thank you so much for this information. You are a blessing to so many of us be safe ,God bless you and your family and friends.

@danaolsen4358 7 жыл бұрын

Did the fix this weekend with great results! Thanks donyboy73!

@markspeck3736 2 жыл бұрын

Thank you! Great video. You brought my mower back to life.

@jetjazz05 8 жыл бұрын

Really nice of them to put a sticky side on that gasket, I wish all gaskets (especially for vehicles) came with that. Nothing worse than only having one gasket and pinching it and ruining it because it slipped out of place.

@carlosh.deseixas4850 5 жыл бұрын

I am in Brazil coutry Ponta grossa city Congratulacions for your job...

@donyboy73 5 жыл бұрын

greetings from Canada

@We4winds 2 жыл бұрын

Don, I've always enjoyed watching ALL your videos. Very well made. For this problem here, I presumed you already ruled out the solenoid and starter? I have a hard to start Husqarvarna and I will rule out starter and solenoid first from your other video.

@hankbridges5055 5 жыл бұрын

Pull the rocker cover and check if the rocker is loose. Adjust the valves. The seat may be loose.

@99carnot 8 жыл бұрын

Really good OHV checking and adjusting process tutorial. Having the tool descriptions at the beginning is very helpful. Thanks!!

@siraldo51 6 жыл бұрын

my mower is doing this i'll try myself and see thanks hit you back when done thank again

@JoseMorales-du1mn 6 жыл бұрын

Hi donyboy73 i like watching your vids i have learn alot with them thanks keep it up

@jdehaan001 8 жыл бұрын

Dony, this video came at the right time. My John Deere Lawwn Tractor 145 with the B&S engine is doing the same thing. I can hardly wait to adjust the valve lash, but will order a new gasket first. Thanks for that.

@mickeyverdinelli5921 4 жыл бұрын

I have a bolens 42-in cut 17 and a half horsepower I put a new solenoid and starter on it and it has too much compression and I cannot get it to start can you give me some information

@mickeyverdinelli5921 4 жыл бұрын

And I also put a brand new battery in it

@robbyjones7631 6 жыл бұрын

First thing to check is valve adjustment. Check the leakdown with both rocker arms off to check rings and valves and head gasket. Drain the carb. at the beginning of Winter and put some Gumout in the float bowl. Bring the carb. and tank inside to prevent the diagram from freezing in the Winter. Put a little oil in the cylinders to oil the cylinders in the Winter. Don't leave yard equipment out in the rain. Put a cover over it in the Winter. Water gets in the muffler and then gets in the valves and causes sticking valves.

@jeremyferris9774 4 жыл бұрын

Great video! I've been fighting this issue for almost a year and went through numerous batteries!

@jacobusa4727 7 жыл бұрын

I'm sure but that bottom rechecking gap rockier was way too loose, kind of hear the clicking while low idle plus anticompression spring may of let go, BT was good lesson for all that have a small engine beware don't get ripped off by those money hungry shops and give you a Long story and unnessesary repairs,,,,,,,,,, thank Donny for these freebies I guess thumbs down are the small engine shops , now be honest guys keep smiling boys😬

@dannybourke45 7 жыл бұрын

Great information and very well put across one of the best online great tips and detail

@bubba7765 7 жыл бұрын

Dony, outstanding vid. Thanks, you saved me a whole lot of time and trouble. Runs great now.

@jerrybowers2119 5 жыл бұрын

Hard starting 2 things to check Spark Plugs clean or replace with thin electrode platinum or irridium helped even on new Craftsman T260 had std Champion RC12YC in Kohler 23HP hard to start after sitting few days. NGK Brk5e's and starts in 3 tries. Other check fuel filter and change. Clean air filter check if fuef pump working. Valves need set as in video could also be coil or electronic modules have to test start with plugs and fuel filter.