How to fix a start button on a GE dryer

No video

How to fix a start button on a GE dryer

Рет қаралды 53,081

Күн бұрын

Click here amzn.to/43DvRu0
How I Replaced a start button switch on a GE dryer. First unplug the machine! Then remove the cover 4 or 5 screws. I mistakenly removed the start button first then I pulled out the switch. Its easier if you remove the switch first by shifting the plastic catch to the right and twisting the switch counter clockwise, then its easier to squeeze the 3 catches on the start button either way it works to remove it. Then put on new switch and do everything in reverse. Good luck!

Пікірлер: 52

@Eric-qz9vp Ай бұрын

That was a good replacement video, I'm not sure I would call it a fix video though but easy enough.

@TomLeeman Ай бұрын

Yeah, replacement might be more apropos

@srvonjr 4 ай бұрын

Thks for video. I see a crack on the start button. Mine had one also and switch was cracked. Just tape it with gorilla tape and it’s back working. Probably going to order a new switch and start bottom though. Thks for video. Saved me some money!!

@TomLeeman 4 ай бұрын

Glad it helped do it yourself. Thank you for watching.

@Nathan-hs9po Жыл бұрын

Thanks mate! This video helped me tons. It made me figure out that the button was cracked and not pushing the switch all the way in.

@TomLeeman Жыл бұрын

You're welcome! Thank you so much for watching and good luck on your fix

@soliver902 Жыл бұрын

Thank you for posting this! I was able to fix my dryer! 👍

@TomLeeman Жыл бұрын

Excellent! glad to hear it. Thanks for watching.

@tobycruz9283 Жыл бұрын

Thank you so much. I thought I needed to replace the thermal fuse or the door switch is what I thought the problem was after researching and all the KZfaq videos. Then I came across your video and found out it the button was broken. I just super glued the metal pc back inside the button and it did the trick. I cant believe it was something do small and such an easy fix. Thanks again.

@TomLeeman Жыл бұрын

Excellent!

@jesset2504 Жыл бұрын

I’ve just done the same thing now I’m moving on to the push button!

@intsoccersuperstar1 3 ай бұрын

The plastic lip on the bottom of mine completely broke away after 4 and a half years. No idea how that happened, unless it was installed improperly, the plastic wore out, or maybe my wife hammered the button. Trying to brace it with duct tape, I’ll let you know how that goes.

@catolicodominicano 3 ай бұрын

How's it going bro did you did it?

@intsoccersuperstar1 3 ай бұрын

@@catolicodominicanoYes I was able to use several strips of duct tape torn in half lengthwise to sort of build a cradle to hold the switch flush against the panel. No idea how long that’s going to last, but at least I can start the dryer now. I guess if the tape ever wears out or comes off I can always just open the panel up again and retape it. Still, bizarre cheap design from GE. Can’t say I’m surprised these days though.

@TomLeeman 3 ай бұрын

Good luck I hope you get her fixed and thanks for watching

@barkyharrington Жыл бұрын

I just did a similar procedure today. But, I pried the grey button out with a larger flat tipped screwdriver, which came out very easily. Then I twisted the push button switch out and reseated it and pushed the grey button back in, making sure it was aligned.

@TomLeeman Жыл бұрын

I think that’s the better way to do it. I did it kind of backwards.

@sandyguzman24 11 ай бұрын

Thank you so much for this video! I'll come back to let you know if I did good thank you again🎉

@TomLeeman 11 ай бұрын

Good luck on your install and thanks for watching

@tdirt663 5 ай бұрын

Yes sir my man thank you part order

@TomLeeman 5 ай бұрын

You bet good luck on the install and thanks for watching

@fluffybunny2000 5 ай бұрын

This is an issue with these ge dryers. I’m seeing a lot of people 1 year 8 months ago mine just stopped being able to push like it realigned it’s self away from the button.

@TomLeeman 5 ай бұрын

Yes, it’s probably poor design that they wear out

@CG-sg9bl 20 күн бұрын

My problem is similar. When I push the start button the dryer runs. As soon as you take your finger off the button the dryer stops. So the start button works but won't hold itself to dry the clothes. I held the button for a minute or so then felt the clothes and they were slightly warm, so the dryer works, it's the grey round start button that won't stay on. Any advice from anyone on what part I need to buy and how to fix? Thanks so much!

@TomLeeman 19 күн бұрын

The Springs in there going so do the Contacts they don’t last forever unfortunately I think they make them that way so you buy new washer and dryer. Good luck thanks for watching.

@joshuatree12 Жыл бұрын

Thank you for sharing the Video I have the same exact issue. What is the part number? How can I order in Amazon.?

@TomLeeman Жыл бұрын

What I did was pull the part out I did an image search and then I purchase that part that looked just like it. I’m not quite sure what the model number is.

@torriebrown23 23 күн бұрын

Please submit a link for part

@TomLeeman 22 күн бұрын

I think this one might work, but you’ve got a check it against your model number amzn.to/4daJmXX

@allineemelendez3561 Жыл бұрын

Thank you 🤙

@TomLeeman Жыл бұрын

You’re welcome enjoy your fixed dryer

@justgosee Жыл бұрын

THANK YOU! Mine seems to be just the plastic button? The switch works fine so I just put it back in without the button. :)

@TomLeeman Жыл бұрын

Did it work?

@edstevenson1693 Жыл бұрын

@@TomLeeman I did this too - the button looked ok, but was not activating the dryer. So I removed the gray button and now we just push directly on the black switch.

@TomLeeman Жыл бұрын

@@edstevenson1693 excellent work around you can’t complain if it works right good job thanks for watching🤙🙏

@7thwheel 8 ай бұрын

I am having a problem with mine that is a bit different. When I push the Start button it feels like it's trying to start (It makes a noise as long as I am holding it) but it doesn't want to kick over. Could this be the starter as well or is it maybe something else?

@TomLeeman 8 ай бұрын

That switch has like a little contact played in it that Hass to be engaged to get it to work and sometimes that thing is just not working and you have to get a new one. Good luck. Thanks for watching.

@dsadasey Жыл бұрын

Thank you!! I just fixed my own dryer!!!!!!

@TomLeeman Жыл бұрын

Great job!

@lindameadows9771 Жыл бұрын

Thank you

@TomLeeman Жыл бұрын

You're welcome

@vareobyrd9553 Жыл бұрын

Hey what is an alternative if that flap that holds it breaks off

@TomLeeman Жыл бұрын

Are you talking about the rubber part that’s in the front I think it will still work if you can connect it into the holder and just press that little plunger