HOW TO FIX/ADJUST *MICRO ADJUST* ANY SRAM AXS (RED, FORCE, RIVAL) VERY EASY!!!

No video

HOW TO FIX/ADJUST MICRO ADJUST ANY SRAM AXS (RED, FORCE, RIVAL) VERY EASY!!!

Рет қаралды 201,579

3 жыл бұрын

CERAMIC OSPW FOR ONLY $250!!!!
USE CODE: GCPERFNOVA10 at checkout for 10% off your total order!!! it helps me out!!
novatoride.com/gb/
CHECK OUT INSTAGRAM FOR BEHIND THE SCENES AND ALSO GIVEAWAYS FOR SHIRTS!!!!
/ gcperformance_
CHECK OUT THE GC PERFORMANCE MERCH:
GCperformanceyt.com
Business Inquires: gcperformanceyt@gmail.com
Please let me know if you enjoyed this video and if you did please give a BIG THUMBS UP and if you like content like this feel free to SUBSCRIBE for similar content in the future
Thank you all for watching and I will see you all in the next video :))

Пікірлер: 159

@landrywycough2748 2 жыл бұрын

direct and to the point. new to the axs system and had just a slight sloppy noise. couple mins into video and i'm all fixed up ready to ride. thank you

@GCPerformance18 2 жыл бұрын

Thank you for watching!!!

@Snicker60515 2 жыл бұрын

I managed to misalign my rear derailleur while removing and replacing the rear wheel after washing my bike. I'm still not used to the whole through axle disc brake setup and how everything has to be millimeter perfect when going back on. After I put the wheel back on without stripping the threads on the axle or frame, the gears were skipping like crazy and all the clatter as well. I found this video, and managed to correct the problem. Thank you so much for sharing!

@sercheese 3 жыл бұрын

At the beginning I watched your videos as all other with new bikes, etc. But as I saw more and more of your content I see what a humble and nice person you are. You really stay out of the crowd! Now I also watch videos which I have little interest of as this one (having Ultegra R8000 at the moment), just because I like how you present informations. To sum up: you post a new video - I watch :) thank you and keep up the great work!

@GCPerformance18 3 жыл бұрын

Thank you so much!!! That really does mean a lot. I just try to be relatable and help out this community thag I love. I like bikes and I figure we can all help each other out. :) thank you for the kind words

@I3ene1 3 жыл бұрын

@@GCPerformance18 I can just say the same tbh. I started watching because you had all the bikes but recently I really started to enjoy your other videos aswell. And also you make really good fitting videos around the new bikes/new parts tech. Greetings from a german engineer :D

@nicholasbramley139 Жыл бұрын

Great video, worked perfectly. Brand new Canyon with SRAM AXS Rival, setting it up out the box and it was awful, skipping and rattling. Luckily found you guys and 2 minutes later all working perfectly. Thank you so much!

@GCPerformance18 Жыл бұрын

you are very welcome

@andrewkreuter3147 3 жыл бұрын

This video came at perfect time, had to remove rear wheel to fix puncture. When reinstalled wheel had delay shifting into low gear on a one cog. Did micro adjustment and works great.

@KruiserIV 2 жыл бұрын

Same exact issue. Removed wheel to install chainstay armor and when reinstalled, 2-3 cogs sound terrible. Hoping this fixes my issue.

@jasontharp6717 2 жыл бұрын

Thank you for a quick and simple video. Very useful. I also found it helpful to look on the SRAM app on my phone while shifting so I could see the changes that I made.

@GCPerformance18 2 жыл бұрын

that is also a nice feature

@chrisdestefano7273 2 жыл бұрын

You're the best! I thoroughly enjoy your vids. I recently bought a Pinarello Prince that came with the Force etap and am not familiar with SRAM, thanks👍🏼

@GCPerformance18 2 жыл бұрын

Thank you so much and i am glad I could help you out

@GroomsJk Жыл бұрын

Your instruction videos are amazing. For some reason my bike shop here in Orlando are having issues setting up the electronic SRAM products as my new Cannondale Force AXS road bike and new SRAM XO Santa Cruz MTB upgrade came back from the shop out of alignment. Very annoying. Hopefully, I can get both bikes into alignment with the help of this very straight forward video.

@GCPerformance18 Жыл бұрын

Thank you very much for this!!! I appreciate it !!

@RoaldvandenBerghen Жыл бұрын

Really handy! Once adjusted my gears on a long ride. Few taps and all is good!

@GCPerformance18 Жыл бұрын

thats awesome I am glad I could help

@alainpfammatter8224 3 жыл бұрын

Thank you. That was exactly what Iˋve needed. 👍

@nileshvagal 2 жыл бұрын

does the green light change colour at the levers when the battery is low ??? also what if the knocking comes only in one particular cog and after adjustment that cog is fine however some other cog is misaligned .. then what does one do and why it may so happen ??

@hcadena3874 2 жыл бұрын

Great video, although It’s useful to mention what cog to start testing. I found it easier to start on the 2nd (from the smallest) cog, that way I know I’m making proper adjustments within the range limits. If after adjustments I can’t switch to the smallest cog then I know I went in the wrong direction.

@GCPerformance18 2 жыл бұрын

ahhh very nice

@helluminati 3 жыл бұрын

Thank you and enjoy your holiday. Getting my bike nxt month fitted with Sram red so really appreciate the video

@GCPerformance18 3 жыл бұрын

thats awesome!!!!!!! you are going to love it

@helluminati 3 жыл бұрын

@@GCPerformance18 Yes it's a De Rosa Pininfarina

@ioanmcmlxxxviii Жыл бұрын

Thanks bro! We apreciate your work!

@aoe76 Жыл бұрын

Thank You from 🇩🇰👍 simple and informative. Worked just as wanted 👍

@GCPerformance18 Жыл бұрын

You're welcome!

@kimwarner6050 Жыл бұрын

This helped me so much. Thank you

@jacobgillespie3878 2 ай бұрын

This video is so much better than the SRAM guide. Thank you!

@GCPerformance18 2 ай бұрын

You are very welcome

@aerobrain2001 3 жыл бұрын

This is actually the same for the original road eTap not just AXS. Really cool and handy feature :-) I always have to tweak three outboard on my KICKR, then three back inboard when I put my wheel back on

@GCPerformance18 3 жыл бұрын

:))) I am glad u enjoyed it

@C-zt6ps Жыл бұрын

Hi! I've been searching the internet for tips on the original RED eTap (non-AXS) for micro-adjustments. Wondering if you could answer a couple questions that I've still not found answers to! 1. How many micro-adjustments does eTap offer? In that, it shouldn't be possible for the micro-adjust to shift that many times (millimetres) to where it ends up shifting to the next gear up/down, right? 2. Does micro-adjusting the the RD from one cog affect the position of the RD for every other cog? Or can we micro-adjust the RD for each individual cog like Di2? 3. Is there any way to "hard reset" the RD so that any previous micro-adjustments are eliminated installing the RD? Appreciate any help in advance!

@aerobrain2001 Жыл бұрын

@@C-zt6ps one micro adjustment for all cogs, not individual. You can get it to shift gear with micro adjusts, kind of need to given how far out alignment can be. No way to reset as far as I’m aware. Hope that answer your questions :-)

@C-zt6ps Жыл бұрын

@@aerobrain2001 Appreciate the super quick response!

@marcosav5442 2 жыл бұрын

thanks for the super easy explanation, just fixed my beast!

@GCPerformance18 2 жыл бұрын

I got you, I hope it helped

@Parcalona 3 жыл бұрын

I've recently had force on my bike and the gears never sound quiet, the black coated cassette is awful. When you think you've got it set up well in the stand they sound so different whilst you are actually riding. Loook at the new force cassettes coming out Sram have done away with the coating. Keep up the good work!

@GCPerformance18 3 жыл бұрын

yea I know the cassette at first was horrible

@marekkraska5879 Жыл бұрын

Thank you so much. Just fixed my RIVAL😊

@marcustan5868 3 жыл бұрын

SUPER!!thanks a lot.. best utuber

@treesetc3305 Жыл бұрын

Excellent clear and concise tutorial.

@GCPerformance18 Жыл бұрын

Glad it was helpful! thanks for watching

@jdickens111 3 жыл бұрын

Good stuff, thank you!

@ak4good 4 ай бұрын

Thanks, super helpful and helped me dial in my shifting

@GCPerformance18 4 ай бұрын

Glad it helped!

@theapplewatchtriathlete8890 2 жыл бұрын

Thanks for this video. Any idea how you can do this when you don't have shifters? E.g. with a TT setup and blip switches?

@GCPerformance18 2 жыл бұрын

I think you pair the blip box instead of the shifters

@robertobetta9602 5 ай бұрын

Very helpful thank you.

@angela-onesroman8873 3 жыл бұрын

Nice, now all I need is the groupie 🙂....... Can you do a mechanical?✌🏼

@luisrosario4710 3 жыл бұрын

Salute GCP good Job 🙏👍🔥🇵🇷💯

@GCPerformance18 3 жыл бұрын

Thank you as always my friend

@marcovanlieshout6443 3 жыл бұрын

Thx for that, that realy good to know👌

@GCPerformance18 3 жыл бұрын

Happy to help

@Reaper006 3 жыл бұрын

I have a BMC Teammachine with SRAM Force. The chain drops off of the front chainring very often when I shift from the big ring to the little ring. What should I do about this? I know that SRAM drops chains a lot but mine seems to drop far more than expected (about every other ride).

@GCPerformance18 3 жыл бұрын

try bringing it to another store and give it shot because I have not had that issue at all

@kevinli9035 Жыл бұрын

Great video, thanks for sharing! So I got a new bike came with Rival, but the rear derailleur has scratches on it and the front crank won't shift...the bike shop said they will replace them from another bike. My concern is, since the drivetrain all comes adjusted, would reinstall it cause misalighment or other issue?

@GCPerformance18 Жыл бұрын

no they should re align it, bvery easy to do so

@kevinli9035 Жыл бұрын

@@GCPerformance18 Thanks! I remember someone said "I choose SRAM bc I don't hate my mechanic" XD

@shkh2396 Жыл бұрын

Great explanation. Thanks.

@GCPerformance18 Жыл бұрын

You're welcome!

@3luka3 Жыл бұрын

Helped. Thanks for short video

@GCPerformance18 Жыл бұрын

you are very welcome!!

@laurenspraet6038 Жыл бұрын

Thank you sir!

@jimpsyj5600 2 ай бұрын

Thanks!!! Very good video

@GCPerformance18 2 ай бұрын

Glad you liked it!

@DausSedek 2 жыл бұрын

Thanks my friend

@DanaBlack 2 жыл бұрын

Is this the same process for the SRAM XX1 AXS derailleur(w/ Eagle cassette) when paired to Force shifters?

@GCPerformance18 2 жыл бұрын

yes same thing

@davidgutierrez2839 2 жыл бұрын

Thanks Mate!! My bike is making a noise on the smallest cog, could this be the issue??

@GCPerformance18 2 жыл бұрын

it oculd be a limit screw adjustment, might need to take it to a store, or maybe chainline issues

@SY-ve5qm 2 жыл бұрын

Nice demo and video! Wonder if there would ever be needs to manually adjust the limit screws for etap rear derailleur?

@GCPerformance18 2 жыл бұрын

Yes, they should be set from factory just in case

@SY-ve5qm 2 жыл бұрын

@@GCPerformance18 so there shouldn’t any needs to manually adjust the screws mostly, just use micro adjustment for tuning, right?

@thedownunderverse Жыл бұрын

Think of the limit screws as your mechanical fail-safe - they physically limit the derailleur from going beyond the boundaries of the cassette. This way no software/config issue can overshoot your chain. The new 12sp Shimano Ultegra-DA front derailleurs don’t have this (which can cause chain drops). The 105 Di2 front derailleur does have limit screws and is more reliable as a result IMO.

@danielflecha1255 2 жыл бұрын

How can you make a micro adjustment on the front derailleur where there is a slight chain rub

@GCPerformance18 2 жыл бұрын

You need to adjust the derailer with limit screws. There is no micro Adjustment to the front der

@davidsantos5516 2 жыл бұрын

Is this for of the gears....or if it fixes all?... Because i have ones good and outhers making noise

@GCPerformance18 2 жыл бұрын

that u need ot adjust them so you can micro tear them

@juancamilorossoricaurte863 2 жыл бұрын

Tengo un problema, el sistema me estaba funcioando, llegue a la casa lo ajuste con la palicacion y no me funciona, lo que veo es qu eno me lee el descarrilador trasero, cuanto intento enlazar de nueo el descarrilador trasero no se deja, y la aplicacion lo reconoce, o me sale en la lista pero se queda pensado.,, como puedo resetear todo el sistema y volver a empezar

@GCPerformance18 2 жыл бұрын

:))

@vongdong10 3 жыл бұрын

Is the 10t cog generally noisy? I've done the micro adjustment to where most of the middle to outer couple are tolerable. Also is there a way to reset the derailleur to start micro adjustments from the beginning?

@hcadena3874 2 жыл бұрын

The only thing missing in this video is what cog to start testing. I found it easier to start on the 2nd (from the smallest) cog, that way I know I’m making proper adjustments within the range limits.

@Martinni151 Ай бұрын

Hi @everyone do you need to do the micro adjustment per cogs? Or just one in the middle like this video

@GCPerformance18 Ай бұрын

just the middle

@pascualyy2 3 жыл бұрын

This was great. Can you do a video on how to adjust sram ax’s front derailleur?

@GCPerformance18 3 жыл бұрын

they are pretty easy to adjust they have a tool you can buy and help do it yourself

@michaelgurule2566 2 жыл бұрын

@@GCPerformance18 what is the tool to purchase? Link?

@christosballis2032 2 жыл бұрын

do yoh know if the 12 speed force etap will work with an 11sp cassette and chain?

@GCPerformance18 2 жыл бұрын

I dont think so, I mean maybe you can limit the last gear but it might not shift right

@Neil-mh6cc Жыл бұрын

Legend.

@tisnatgc9190 6 ай бұрын

Thank you

@GCPerformance18 6 ай бұрын

of course!!!!

@JordanHMay 3 жыл бұрын

Can you please do this for AXS EAGLE for mtb? I can’t find a simple video like this anywhere. Thank you great video!

@elheat247 3 жыл бұрын

Please 🙏

@ortodontiaespecializada9283 2 жыл бұрын

I’ve just been using my new orbea oiz ltd with xx1 axs, 10/52 cassete for like ten days… It’s been difficult to fine tune it… I had a problem when the chain got stuck two or three times… going up to the larger cog… The jockey pulley tangled and it was a mess… then we realized the hanger was bent (didn’t know if it was after the jamming or not)… but the micro adjustment you showed was the key… The derailleur was touching the larger cog when moving up from the second large up… Really fine tuning… This happened only when there was a higher load on the crank… Was really sad!! Spent a fortune and hope this is solved! Now will test further more and hope it works!

@miguelduhamel3394 2 жыл бұрын

Thx 👍🏼🏁

@GCPerformance18 2 жыл бұрын

thank you for watching

@steveindorset 3 жыл бұрын

How about the front derailier? How do you micro adjust that?

@GCPerformance18 3 жыл бұрын

there really isnt micro adjusting there you have adjusat by hand and then the limit screws corectly

@Ninerwhiskey Жыл бұрын

Nice video! Would've been a little better if you demonstrated the front derailleur. Cool video neverthless!

@GCPerformance18 Жыл бұрын

Next time

@DanTuber 3 жыл бұрын

So now screws at the back like on shimano mechanical?

@GCPerformance18 3 жыл бұрын

yea

@erickgermanpaxtorsaquich4667 Жыл бұрын

Could you do a video on how to do this on the app for dummies like me? It should be straight forward, but it shows 1-29 on the app when my cassette is 10-33. Thank you

@GCPerformance18 Жыл бұрын

yes I can mayube make one doon

@grobbosixtyone Жыл бұрын

Can you micro-adjust on each cog or does the micro-adjust on one cog also apply to same amount of shift to all cogs? Also any way to reset the micro-adjust to a factory default?

@GCPerformance18 Жыл бұрын

each cog but ti wil effect the overall position of every other cog

@grobbosixtyone Жыл бұрын

@@GCPerformance18 Pity as only 1 cog is out of line. Pity SRAM won’t offer this ability as Shimano DI2 does

@thedownunderverse Жыл бұрын

@@GCPerformance18so then it’s not each cog… it’s a single trim feature, applied on a particular reference cog, the results of which will span the entire cassette. Reference cog could be any, but I agree with your point that the best cog to choose is the one with the straightest chainline.

@Adam-vm8kp 11 ай бұрын

@@grobbosixtyoneone cog cannot be out of line as the mech should move the exact same amount on each press. Check your rear mech or hanger isn’t bent or you don’t have any broken teeth or excess wear on that sprocket.

@GiovanniRuedaMarketing 3 ай бұрын

This is so cool

@GCPerformance18 3 ай бұрын

you are welcome

@jn01996 2 жыл бұрын

Is it normal for 12 speed eTap to use only 11 of 12 cogs at the back when small front derailleur is set?

@GCPerformance18 2 жыл бұрын

Yes that’s normal. On a 2x set up it won’t allow you to go into the 10t cog when in the small chainring on the front

@jn01996 2 жыл бұрын

@@GCPerformance18 Cheers, was just adjusting my SRAM Rival and was wondering :)

@averagerider92 2 жыл бұрын

Does this process replace the Hi/Low screws?

@GCPerformance18 2 жыл бұрын

no it does not replace them but, but the hi low should be set from the shop you buy it from.... they should not be needed to be touched, after set up

@averagerider92 2 жыл бұрын

@@GCPerformance18 I replaced my crankset from rival to force, now shifting the front derailleur from small to large doesn't engage the chain. So not sure if I should fix with micro trims or using high/low screws (I don't even see the screws on rival axs)

@jn01996 2 жыл бұрын

The exact same adjustment can be performed using micro adjustments settings through SRAM app - you don't even need to press those little buttons on the shifters

@randy3907 Жыл бұрын

A lot easier also!

@heliscat Жыл бұрын

In-app MicroAdjust is a feature that is only available on road rear derailleurs at this time. Quoted from support. My microadjust isn't available on the app. Boooo....

@harrydelaney6623 6 ай бұрын

@@randy3907ohh ye how donu do it?

@christosballis2032 Жыл бұрын

Ot would be great if the front derailleur could change the position according the rear selection. For me its not right that it keeps the same position on 2/12 and 2/2

@GCPerformance18 Жыл бұрын

They need to work on that for software. It would be nice to have like an auto trim system

@Adam-vm8kp 11 ай бұрын

Di2 does that really well, it also change the rear gear when moving the front to keep the same cadence.

@Adam-vm8kp 11 ай бұрын

Nice you can change the gear even if the shifter is broken or the batteries dead.

@GCPerformance18 11 ай бұрын

double tap the button on the rear mech

@Adam-vm8kp 11 ай бұрын

@@GCPerformance18 yeah that’s what I mean, clever.

@bikedawg 2 жыл бұрын

shouldn't you make sure the the limit adjustments are dialed in first?

@bocksteinbikes Жыл бұрын

No. You first do your indexing and then set the limit screws on AXS systems.

@Eatsmartmovealot Жыл бұрын

Does the mikro adjustment sram red etap 11

@GCPerformance18 Жыл бұрын

yes

@YPO6 2 жыл бұрын

Hopefully next evolution in wireless shifting is automatic adjusting.

@GCPerformance18 2 жыл бұрын

lmao, we wil see

@ChrisM-gf8ph 2 жыл бұрын

Does it work the same way for sram red etap?

@GCPerformance18 2 жыл бұрын

Yesh

@ChrisM-gf8ph 2 жыл бұрын

Nice. Got my bike back from lbs and it’s noisy like that. Will try tomorrow to adjust as I think it’s the same issue. Thanks buddy

@alexandruxmaris 24 күн бұрын

Am I right that the same can be done through the SRAM app?

@GCPerformance18 24 күн бұрын

Yes it can be

@alexandruxmaris 21 күн бұрын

@@GCPerformance18 nice, thanks!

@barkeater7867 Ай бұрын

i assumed once the small and top cog is aligned the rest should be fine. I guess not!

@GCPerformance18 Ай бұрын

yes it is not individual

@zzsql 9 ай бұрын

When I adjust one gear, it messes up the one next to it. It's really ridiculous. As I understand it, we independently adjust each cog and shouldn't affect adjacent cogs but it appears to. Really enraging.

@GCPerformance18 9 ай бұрын

check the derailer hanger to make sure it is not bent and lined up properly

@akhiltrandapuppi3864 10 ай бұрын

Hi. Wich side unscrew fd h/l bolts?

@rodcosta2345 3 жыл бұрын

Here I am riding 105 and watching SRAM adjustments... what have you done to me?

@GCPerformance18 3 жыл бұрын

ahhahahahha I thank you for enjoying

@2wheelsonline Жыл бұрын

👍👍👍👍

@GCPerformance18 Жыл бұрын

Thanks so much!!!

@javedmower4091 2 жыл бұрын

Does anyone else find sram force axs to be a noisy piece of junk groupset? I’ve had mine for a couple years since new and it isn’t a polished product especially given the price. I’ll be heading to shimano di12 12 speed to get rid of this unrefined piece of junk soon!