In case you want to support me: revolut.me/georgex4u

Finally! I found a fix that worked. Thanks so much and no worries about the English: it's perfectly understandable.

Your English is fine and perfectly understandable.

Your english is great! And so was your tutorial. I fixed my daughter's printer today with your advice. Thank you!

Your English is better than my German! LOL..Thanks for sharing. This has been a huge headache for me; I am about to attempt this.

You are a genuis. You are amazing. I cannot tell you how much stress this has caused me for the past 2 hours. Hero. 🎉❤

I had to run through instructions twice but worked after the second try. Used approximately 2ml of water all up to clear. Thank you

Thank you immensely! I was at my wit's end 😀, but this video came to my rescue and saved me a ton of time.

Hell Mr George, excellent video. One thing dough, I am like you not english speaking from start. I am swedish. We have made the work to learn another language and most of the Americans or UK or the native english speaking groups have never made the effort to learn another language. Ones when I was young I worked briefly in Alabama USA. One lady made fun of my Oxford/Queen english and I felt very embarassed and ridiculous infront of all the people present. The lady spoked out very load and was keen on pushing someone down infront of her friends. I spoke Swedish, English, some French and I understood German. I felt the need of defending my self and I answed her in the same high level and I said: Madam with all respect, I speek your language and I have made the effort in school to learn and I also depart to another country to learn more. Madam do you speak and understand my language or have you ever made an effort to learn another language and have you made any visits outside Alabama or the USA? The lady got all red and wanted to dissapear. After that I was happy of my respond and also of my effort to learn. As non native speaking a language we should never apologize for not making it perfect. we made the effort but not perfect (the firt time). keep up the good work my friend.

Thank you man! I didn't follow exactly your instructions but you inspired me to try something similar (as I didn't have any syringue available at the moment), I grabbed an old little bike pump and put its head into the cartridge's noozle to pump some air. It worked like a charm, the ink clog (I suppose that's always been the problem here) is gone. Two head cleanings after, it's printing as the first day. Thanks

Perfect. This worked on a hopelessly clogged Epson WF 3720. I believe the secret is a tight fit between the syringe and ink nipple. Forcing water through the print nozzle. Your explanation was short, sweet and to the point. Thank you for your help.

weheeey thank you sooo much ,I was slightly sceptical but now I can print my flight details and don't need a new printer or costly repairs

This worked like a charm! I didn't have the right syringe, but I improvised and it worked. Thanks so much!

Great short video and to the point. Worked great in getting the black ink to print on our Epson WF-7220 printer. Thank you!

Thanks so much for posting this fix! I didn't have the exact syringe you specified, and instead used a length of fish-tank airline tubing connected to a kitchen basting syringe. It flooded a lot more than you showed in your video, but did well enough in freeing the clog.

It worked for me. Thank you so much.

Thanks for the advice - got my printer working again!

Omg! Thank you so much for sharing this cleaning tip mu black ink is now printing!❤

You are an absolute star!!!!!! Thank you so much!

My blue isn’t working at all and the black has many broken lines. I have done about 6-7 head cleans now and the blue still doesn’t work at all I will give this a go thanks 👍🏻

This was a great fix! My printer is up and running again, it is at my beach house so it is not used much, this was just the advice I needed! No worries your English is great-way better than my German!!!

Thanks brother! This actually worked. I was just about to put my printer in the trash, but you've helped me fix it! Danke schön!

This totally worked for me!! Thank you

Brilliant! Works perfectly

Perfect on Epson XP-245, thank you very much!!!!

Worked great! I didn't have your type plunger so I attached a (very) small diameter plastic tube to a squirting plunger (Excelint) that I had on hand. Did 3 rounds of squirting (very) hot water before running the print head cleaning (twice) on my WF-2760 printer. Now, no need to see a therapist about all the anger and frustration.

Thank you so much. Ive not yet tried but i know it will work properly❤❤ Thank you guy🎉🎉 Ill come back once it done

A Big Thankyou, saved me buying a new printer as the so called engineer couldn't fix my problem and said I would have to buy as they couldn't source a printhead.

Excellent! Thank you!

Thank you so much! This helped me!!!! 👍

Thank you for your help & support. And your English is perfect.

Your English is good! I was able to understand you perfectly!

I cut the nozzle off a 5ml syringe and drilled a 4mm hole through the end of it. Flushed the print nozzle with very hot water and it has worked well. Thank you for sharing

Your Inglish is very good .🎉

Excellent English don’t apologize, thanks for the tip!

Best advise yet ! Thank You

brilliant! works great. thank you!

You're english is fine man. Easy fix thanks to you!

Thank you Mr. George you are wonderful!! This worked great!!

Thank you it worked!

This worked for me, thank you so much! 😁

It worked thank you so much !!!

Thank you! Actually work!!!!!

Worked like a charm! 🎉 Thanks my friend. 😉

It worked thank you! You spoke very nicely good job!😊

Your English is excellent!

This worked! Thank you!!

I'm going to give this a go. Thank you for the upload.

wow!!! you are amazing. It worked wonders. Thank you so much.

It worked thank you 🎉

Thank you!

Damn, 2 hours struggling with this damn printer and finally thanks to you, fixed !

you're doing god's work borther! you saved me

Thank you so much!

Outstanding.

Bro your English is perfect. Great video!

Your English is better than my German, thanks.

This was great! Thank you and youre English is better than my German, lol you're great!

Thank you

Your English was fine 😊

Congratulations!

Ima try it

i didn't have a syringe that clicked over the thing, so I will try this again. but it did make the other colours come out better. the problem I am having is with the black only. somehow it is not going through and it is collecting in the area where you attach the syringe.

About to try this... I'll let you know.

OH MY GOD THANK YOU SO MUCH; I LOVE YOUUUU FOR SHOWING THIS, Black ink didnt fckin work for 2 weeks and i did like 30 nozzle cleans with the printer, this really worked btw your english is pretty good

Is this possible on a WF5620? The printer cartridges are at the front in a forward facing slot.

Do you do each cartilage or just the black?

OMG this actually worked. Your instructions were simple and clear. I'm astounded. I want to support you, but I have become concerned about all finance apps that I am not already currently using and therefore tried and true. Do you have an alternative? Oh and bilingual people never have to apologize! Instead, it's us stupid monolingual Americans who should be apologizing. Your accent is lovely, and easy to understand.

It worked out fine, thanks a lot. If i may add, ALWAYS use plastic gloves, inks may be terrible oin these cases ;-)

Your English is better than my German.

I like your accent.😉

what about workforce pro the white models where inks are connected with printhead with pipes? Printhead is locked.

Holy Moly Donut Shop!!! It worked perfectly 🎉🎉🎉🎉. Now I need to replace my baby medicine dropper 😂😂😂 Thank you, thank you, thank you!!!

Hi, thanks. Can i use injection syringe?

Where did you get the syringe from please?

Hi i tried what you mentioned, still no black colour coming out all. Indeed after i did this the little amount was printing before gone.! What do you think is the issue? My printer is epson wf7830 Thanks

I have a slightly different model, the WF-2630, and it’s notable that the hole in the nurofen syringe is not big enough to fit into the thing, but i’ve tried it anyway, and am testing it right now while typing this comment, soooo: nope. doesn’t work. I’ll try again.

My black works fine it’s the colors that are not working

Bun tutorial👍😂😂

hot water will delaminte your printhead so anyone trying this method I would only use luke warm water

My black isn’t 😢working I wanna try this I’m scared

yeah that was a good trik. But why in the hell, u have to lie about where u from, your name (George)the paper witch u print is written in Romanian language, even the language from your printer is in Romania🤦🤦🤦🤦🤦