How to Fix an Rain-Bird Anti-Siphon valve no glue

No video

How to Fix an Rain-Bird Anti-Siphon valve no glue - no pipe cutting

Рет қаралды 24,576

Irrigation plus

Күн бұрын

Replacing an anti-siphon valve no glue -no pipe cutting Need it#sprinklersystem #comoconectar

Пікірлер: 25

@PURE_LUCIDITY 9 ай бұрын

Informative and helpful. But if it was me, I’d hose down the dirt and debris from the valves and pipes, before I open the valves. There were piles of dirt around the valves, that stayed on the valves even after replacing the valves.

@susiagui7177 Жыл бұрын

Thank you for your video. So helpful.

@Grinch83 11 ай бұрын

great video,I really needed this information

@michelleln5958 Жыл бұрын

Very helpful video! Thank you!

@angiegallegos1478 2 жыл бұрын

Thank you. I’m going to try this first!!

@Irrigationplus 2 жыл бұрын

Good luck 👍🏼

@angiegallegos1478 2 жыл бұрын

@@Irrigationplus that did it! Now I have two more that need to be replaced. Thanks for the time saver tip!

@ashishsavla1338 8 ай бұрын

Thanks a lot! 👍

@caliboy2498 5 ай бұрын

Luv to see u used old bottom pre fitted caps coz I was gonna cut bottom buy new fittings and glue to install new valve

@caliboy2498 Ай бұрын

@@Tendertroll1 no I didn’t n used the way u did thanks it was a great help

@mengruzhang4832 Жыл бұрын

thankyou! So helpful!!!!!!!

@TheTravellerPk 2 ай бұрын

Avoid Drilling Machine while tightening the screw,. It can break the PVC fittings

@brentc3842 2 ай бұрын

How do you fix the honking at 10:30? Mine wont stop making that noise. Thx

@williamdavid6283 Жыл бұрын

Wait, wasn't the valve leaking at 10:30 timestamp or was the one without the solenoid supposed to release water but the one with the solenoid doesn't?

@sunwoodad Жыл бұрын

Hi I try to replace the exact the same, my valve has a leak right below the handle and above the 6 bolts. Question. Should I buy whole module? Can't I just buy the black part you replaced?

@Irrigationplus Жыл бұрын

It’s better to replace the valve but, replacing the parts is easier to don’t have to buy parts and glue

@sunwoodad Жыл бұрын

@@Irrigationplus So, just removing 6 bolts and replace the upper part is enough right?

@robertbrandywine Жыл бұрын

What handle? There's nothing on the valve that I would call a handle.

@Kings-vs7om 2 жыл бұрын

That takes longer than putting a new valve, but i get someone that doesnt want to mess with it.Its a quick fix.

@robertbrandywine Жыл бұрын

Does it? It really depends on how far from the main manifold the valve is. If it's close, then it is a real pain to repipe. Plus, I'll bet my glue and cleaner are no longer usable and I'd have to make a special trip to get new.

@RFT2112 2 жыл бұрын

Wait! you bought a new valve to replace the Diaphragm? Do know you can buy a diaphragm kit at any hardware store?

@Irrigationplus 2 жыл бұрын

Hi yes, I do know but, The vídeo is about replacing most of the parts of the valve not just the diaphragm. But, Thank you for commenting. Now people will know that they can only replace the diaphragm if they like to 👍🏼

@jeromegiles15 2 жыл бұрын

It depends where your valve is leaking from. Mine was leaking from the pressure regulator valve stem. Rainbird doesn't sell a kit for that...you basically have to do exactly what he does in this video. Purchase a whole new valve and swap out the parts you need.

@robertbrandywine Жыл бұрын

@@Irrigationplus That didn't work for me, though. I think I had screwed the solenoid down too tight (like they warn you not to do) and damaged the valve.

@Saulodepittsburg Жыл бұрын

I just bought the diaphragm kit and the issue solved! Thank you. Save money!