Please watch: "Here's How To Quickly And Easily Fix Your Broken Usb Cable"
• How to Repair USB Cabl... -~-
How To Fix Broken Or Not Working Power Switch Button Of PC ? Repairing Power button (100% Fix)
How to turn on (Start) a computer Without power button
buy Power Reset/on/off Switch Cable and HDD LED Light Cord:
amzn.to/2vV9McU
If your PC's power switch button is broken or not working, don't worry, it can be fixed. Here are the steps you can follow to repair the power switch button of your PC:
1. Turn off your PC and unplug it from the power source.
2. Open the case of your PC. This can be done by removing the screws on the back of the case and sliding off the side panel.
3. Locate the wires that connect the power switch button to the motherboard. These wires are usually connected to a set of pins labeled "PWR\_SW" or "POWER SW" on the motherboard.
4. Remove the wires from the pins by gently pulling them off. Take note of which pins the wires were connected to.
5. Use a multimeter to test the continuity of the power switch button. Set the multimeter to test for continuity and touch the probes to the two pins on the back of the power switch button. If there is no continuity, the switch is broken and needs to be replaced.
6. If the switch is broken, remove it from the case by unscrewing it or popping it out of its holder.
7. Replace the broken switch with a new one. You can purchase a replacement switch from an electronics store or online.
8. Connect the wires from the new switch to the pins on the motherboard, making sure to connect them to the same pins as the old switch.
9. Close the case of your PC and plug it back in.
10. Test the new switch by pressing it to turn on your PC. If it works, your power switch button is now fixed.
Note: If you are not comfortable working inside your PC or with electronics, it is recommended to take your PC to a professional for repair.
In this tutorial I tell you how to start a computer without a power button, it is very quick and easy, all you need is a screwdriver!
This quick how-to shows how to jump-start a motherboard by bridging the power-on header, avoiding the need of a power button on the case.
** Please like, comment, and subscribe for more! **
:-) For any Business & Sponsorship Enquiries
satej08@gmail.com
#Tech #Repair #TechElectroid #DIY #BellButton #Power #Button