This video will show how to quickly replace a broken key on several models of the Yamaha keyboard family.
Пікірлер: 111
@dchromej11 ай бұрын
Straight to the point with no rambling about random stuff in your house. Thanks
@sarys733 жыл бұрын
I've watched many repair vids for a lot of different stuff, and you are by far the best. I've never seen anyone explain in such great detail. I edon't even have this keyboard, but wanted to know how it works. Thank you for showing teaching me how to replace these keys.
@timmitchell46335 ай бұрын
Great video brother. Clear, concise, and straightforward. Outstanding.
@Cre8tvMG2 жыл бұрын
Also, to all concerned, if you remove the front panel under the keys you don't have to disconnect the keyboard from the bottom plate to remove the keys. They will just slide forward. It's 2 screws on the sides and about 8 under the front lip.
@rasbaba8968 Жыл бұрын
Qn to this fix... so what was wrong with the initial key that it had to be switch.. coz i dont think if its sticking it has to do with the key rather its getting caught... or was this just a key replacement nothing wrong with the KB
@richmccarthy41283 жыл бұрын
Thanks for this great video. Oddly enough, my B key was also the one that was sticking. While I did order a new key, I think the main issue was that the lubricant was getting tacky, causing a sluggish response. I removed the factory lubricant and added DuPont Krytox Grease, which did the trick. Krytox is pricey, but a lot cheaper than a trip to an authorized tech.
Жыл бұрын
Thank you ! I removed the front cover, instead of moving the keybed up (so risking to damage the cable). Nevertheless, I am most grateful for your video - I have successfully switched two keys (as you did) and am now waiting for a replacement key - which should arrive tomorrow. Thanks again.
@Cre8tvMG2 жыл бұрын
Hey TJ, thanks for this. Our church has one of these with a stuck key and you saved us! I never could have figured this out by myself. It would have been hours of frustration. Thanks!!
@kenhales770Ай бұрын
Very helpful. This also worked for my Yamaha CP33. Thanks for posting this.
@beatrocka56 жыл бұрын
This was incredible. I don't use the MO8 much these days, but when I'd move it, different keys would be stuck; one of the little persons in the home thought it was a good idea to slide something between some of the keys. a small jiggle would make the keyboard function fine, but today, I just got sick of it. I was able to safely extract a penny and a quarter sized washer...I had to remove about 12 keys total to find them both, but this was a great tutorial. Thanks for posting. Ted Twis
@GrandDaddyDoug8 жыл бұрын
I've had a similar problem with my Motif 8 for years. It's my D5 that's sticking, tho... Thanks for this video. After watching you a few more times, I believe I can FINALLY take care of that problem. Seriously, Thanks for posting this vid, Bruh!!!
@PianoClubHouse8 жыл бұрын
Yup! Like you, i was hesitant to crack it open at first. But now that you know what to expect, it should be a piece of cake!
@tapmoron6 ай бұрын
Extremelly well made, very comprehemsive. My congratulations for that I will try it this week ennd. A big big thumb up.
@dippster3578 жыл бұрын
I agree, this was great, the thing about you is, you understand what most & how people think when you do this you can explain and give directions to anything and most people can follow, thanks again for giving so much of your self your truely blessed!
@fugley6 жыл бұрын
This has to be the best instructional video I've ever seen! Thanks for sharing.
@Taooflu4 жыл бұрын
Dropping in to say thanks! Dropped my Yamaha a few years ago; some keys got stuck... luckily I didn’t need to replace any just “unlock” them after a few jammed. Thanks!!
@sciencepower32294 жыл бұрын
Excellent video I have an S90 ES and only diff was that two screws gets the key front off so you don't need to move whole keyboard backwards
@tiendinhle7 жыл бұрын
Thank you very much. Your instructions are very clear. Excellent job! I did remove the front cover in order to clear the way for pulling out the key instead of doing your way though. I took the key out and I could feel a little sticky on both sides of the key.I used paper towel with a little of water to wipe on the sides of the key until I could feel clean/smooth on both sides.I put the same key back and it works like new. Thanks again.
@andresvilsa4 жыл бұрын
Thank you so much! Excellent video! I somehow found a guitar pick beneath the key that wasn't working. You saved me a trip to the repair guy :)
@buschovski15 жыл бұрын
I have a Casio Privia I was trying to get some keys out of. I think this is what I needed. I’ll try it tonight. Thank you so much man. I need to try n fix some dead keys.
@MatthewWhiteside3 жыл бұрын
Thanks for this, easy to follow and fix two keys that became too closely aquainted to a flight case!
@onepuffaway8 жыл бұрын
Wow, you are really good at explaining things.
@PianoClubHouse8 жыл бұрын
HA! Thank you!!! I teach preschoolers every day, so I get a lot of practice. LOL.
@cbmuzik30005 жыл бұрын
Thank you so much for this vid! I dropped a key in between my keys and it went into the bed of the keys. This was exactly what I needed. Keep small things away from this board. heh
@lukefromtexas2 жыл бұрын
Thank you for this. Great work.
@Dnicovich7 жыл бұрын
Thank you for this! I'll be performing surgery on my MO8 today.
@thejamalgillis8 жыл бұрын
Are you not able to do something to the one key itself to keep it from sticking?
@SG-cq6fn4 жыл бұрын
Best how-to I've ever seen. Thanks
@simeonotoo14987 жыл бұрын
Thanks Bro this video helped me a lot. My M08 is a joy to play again.
@poptori6197 жыл бұрын
Thank you for the video. I had the same problem. The very same key as well :) In my case the problem was the lubricant. It was old, tacky and caused the slow release. Also I first removed the front plate, so i didn't have to unscrew the keyboard plate, in order to click those keys out..
@dellafeoficial14475 жыл бұрын
Hi TJ, how is the key broken and why? Great video.
@mychannel61911 күн бұрын
Thank You Bro! Hella Helpful!
@benedictjames8323 Жыл бұрын
Thank you for a fantastic, well explained, assume nothing approach to this video. I have a question though: Will this same technique work for the M06? - thanks again :)
@josnyoccessia53124 жыл бұрын
Thorough explanation. Thanks so much bro. God bless
@johndutton73222 жыл бұрын
Excellent video, brother. None of the extra bs many videos have.
@Jeff1960G5 жыл бұрын
Now that is how you do an instructional video!!!!! Question, I have key 88 (last on on the right, sorry, not a musician, just trying to help a friend) not sitting right on my Yamaha Motif S8. It plays sound, but it is not inline with the other keys. Any idea how to fix this?
@indigoman446 жыл бұрын
I’ve got. My Motiv 8 taken apart thanks for your instructions. I sure can put it back together but One thing I’m having problems with is flat spring that flew out and the new key and old key both seem intact but don’t sound solid rage shape of a tuning fork profile
@PianoClubHouse6 жыл бұрын
SOrry, i can't help you. I never ran across any springs, so not sure of its function or location.
@live4grace Жыл бұрын
Just what I was needing! Thank you!!
@timelessstudios58544 ай бұрын
Hi TJ could you please explain to me why the key was stuck in the 1st place that would help me dermine if i need to replace or just fix the key. Thamks so much in advance
@ricardoshernandezu19472 жыл бұрын
Thanks for this video .👍👍👍👍👍
@ppdrawings8 жыл бұрын
I can't believe you posted this amazing video man!!! Thanks for sharing!!!!
@PianoClubHouse8 жыл бұрын
No problem, thanks for watching!
@chat.lives.matter2 ай бұрын
thank you for this.
@aldoaugusto57202 жыл бұрын
thanks you so much! just in case did you know where I can get a metal cover for synthesizer yamaha m8? mine has oxidation
@phillymob7 жыл бұрын
This totally helped me. Thanks for being a champ and posting.
@Rick-zw7zv3 жыл бұрын
The XS7 you listed in the title has unweighted keys, it appears to be a whole different mechanism.
@georgetan4013 жыл бұрын
The keyboard does not need to shift forward. Instead a cover can be dismounted and the key kan be easily slided out.
@Daniel-tj4fz5 ай бұрын
I have a key that sounds like it's out of tune on a MoX8, do you think the key needs replacing ?
@artsfoundry Жыл бұрын
Great job!
@STUDIORPM Жыл бұрын
do you still have to remove all the screws that allow you to push all the keys back if you are only replacing a black key (Bb)
@joeyboy6762 жыл бұрын
Ok. I just want to point out that these instructions are very good for the model you are doing but are no where close for the motif xs8. You do have to take the sides off but then there’s more screws on top that will allow you to lift the top back being careful of the 3 sets of connection wires. But luckily I noticed after 10 yrs there was so much dust and a strip of grimy crap from every time I wiped the keys. So after cleaning and blowing it out with air, the key didn’t stick anymore. Actually all the keys have so much more action now. But if I had to change one of the keys, you almost have to take the whole thing apart to work on it. But anyway problem solved for now. Thanks.
@dalecsaunders2 жыл бұрын
Thankyou, this was a very helpful video. As some other people have mentioned, it seems that the lubricant gets somewhat gummy, and a cleaning suffices to repair. Also I agree with another reply that it is much easier to remove the lower front panel ( I have the M08) instead of jockeying the keyboard rail. Korg used the Clavinova keyboard in the SGproX models, so this info applies as well.
@JoelBouchillon6 жыл бұрын
EXCELLENT job! Perfect Instructions. Thanks for the Video!
@rickkrive93564 жыл бұрын
Dude!! Thank so much for the tutorial!! Really helpful!!! Blessings...
@mikethekeys2 жыл бұрын
Thanks so much...this was extremely helpful!
@buschovski15 жыл бұрын
Your video was extremely helpful!! Thanks again
@indigos290 Жыл бұрын
Question. Can the "hammers" be removed?
@wakemoody75154 жыл бұрын
Worked like a charm - THANK you!
@ffili923 жыл бұрын
Helpful Video! Thanks!
@MohammadHuda-kq4mm Жыл бұрын
hi there can you describe how to remove key from psr2000 for cleaning purpose and lose keys thanks
@nick5432167 жыл бұрын
Hello. I have MOXF6, and need to replace the keys. I wonder , are the key arrangements, and replacing procedure the same as the keyboards that you are showing? Also, should some lubricant has to be used under the new keys when you are putting the new keys ? Thanks
@JasonHirth3 жыл бұрын
So helpful! Thank you
@joeyboy6762 жыл бұрын
Oddly enough it’s my b that’s sticking too. What causes this? Because my e used to do the same thing but now it doesn’t.
@saturnjason Жыл бұрын
where do you get replacement keys if broken?
@jimmyjamz7400 Жыл бұрын
Syntaur on the web they sell keyboard parts like crazy
@neilcherry841811 ай бұрын
Does this work for MO6 ??
@davidterrell6857 Жыл бұрын
Does this work for Motif 6?
@ericlindal80083 жыл бұрын
thanks
@tylercrow89402 жыл бұрын
You saved me $$ × Thx!
@donppricemusic92853 жыл бұрын
Great video
@otterman4456 жыл бұрын
Thanks for that practical lesson. My buttons are starting to get sticky. Vacuuming didn't help any tips?
@michaelrosen75593 жыл бұрын
Which buttons? The ones that get used a lot? Tact switches wear out eventually and need to be replaced. Also , if something was accidently spilled in the keyboard panel - bad news.
@otterman4453 жыл бұрын
@@michaelrosen7559 I tore into it deeper and found the rubber mats with dirt on them. Also searched and found out how to remove and clean the keys. Had to replace some of the worn panel buttons by ordering them from a source in Texas. The ones that were painful were the actual switch buttons that needed to be unsoldered from the board and replaced. Thanks for noticing and replying.
@tysauce14 жыл бұрын
Does this apply to the Mo6 as well. I need to clean my contact strip and don't wanna pay AGAIN
@joemegguh9298 Жыл бұрын
is the same on a motif 6
@ryanhattingh14354 жыл бұрын
I was given a keyboard but some of the keys are stuck together, how do I clean them, I think the keyboard was not used for a very long time
@1942nn3 жыл бұрын
Does this apply to MO6 as well ? My left most C key sounds really loud. I read from the Web that this is caused by one of the two contacts for this C key does not make contact. Meaning only one contact is made instead of two, and that foul the keyboard in thinking that the key was hit hard ( = FAST) causing the sound to be really loud, even when I press it sligjhtly.
@jimmyjamz7400 Жыл бұрын
Replace the contact strips it will fix that issue… Ive replaced them on my moxf8 and it fixed the problem…
@EbonyKeyzWorshipMusic8 жыл бұрын
Does this work with the Yamaha MO6?
@picaology5 жыл бұрын
Ebony Jones I have the same question as I have the Motif 6 and the MO6
@mediocresaxophonist7 жыл бұрын
Thank you so much!
@dillonjones82648 жыл бұрын
Does this work for the MM8?
@reinmorales12393 жыл бұрын
How can i fix my motif es8. When i turn on my keyboard it doesn't have display on my LCD
@michaelrosen75593 жыл бұрын
Most likely a failed LCD and needs replacing. Does everything else work?
@quocdang1965 жыл бұрын
Good idea
@dkgnew7 жыл бұрын
GREAT! thanks!!
@doitee525 жыл бұрын
Oh! I have a Motif XF8...do the instructions work for that too?
@JuliusDeBerryJr4 жыл бұрын
kzfaq.info/get/bejne/bsykpsyrq5yRlKM.html
@priyaltripathi95354 жыл бұрын
I have yamaha psr 175 and three keys are playing in a chorus sound. Like as if im playing chords on the one key. I rebooted but nthng is happenin
@michaelrosen75593 жыл бұрын
That is usually a key sensor issue or it could be the main board
@nomaboard40604 жыл бұрын
Is a Casio Privia basically the same?
@PianoClubHouse4 жыл бұрын
Unfortunately, i dont know.
@michaelrosen75593 жыл бұрын
Casio keyboards are different design from Yamaha. It depends on which model you have. Casio dp's have other issues besides sticky keys
@pianogram72804 жыл бұрын
So Eddy Murphy repairing pianos now
@RamoneGarrett7 жыл бұрын
Does anyone know how to replacea black key?
@mediocresaxophonist7 жыл бұрын
It appeared when I had mine apart that the black keys come off basically the same way, but I think you'll have to remove the neighboring white keys to get the black key off. Hope it helps!
@jj_muzik8 жыл бұрын
What about the black keys.
@apavisiniajr.69045 жыл бұрын
Crazy how easy this is. If you play keyboard, you shouldn't pay another dime to repair keys.
@Aprendejugando20238 жыл бұрын
Where can i buy the keys for Yamaha motif 8?
@PianoClubHouse8 жыл бұрын
No clue, sorry.
@HaakonReppen8 жыл бұрын
eBay!
@registeredguest7 жыл бұрын
Full Compass. I've successfully replaced three on my Motif 8. www.fullcompass.com/search.php?parent=471&search_simple=true&txtAll=motif+keys
@jeffreyyocum52978 жыл бұрын
what about the Yamaha moxf8
@PianoClubHouse8 жыл бұрын
Sorry Jeff, i'm have not tested on that model yet. But Yamaha has been pretty good with standardizing much of this as of the last few years, so i wouldn't be surprised if its similar to what i've described. Maybe someone else can reply that knows.
@jeffreyyocum52978 жыл бұрын
+PianoClubHouse OK thanks man, nice vid
@AudioReplica20234 жыл бұрын
so...this is not a "fix broken/stuck key" video as the title says. Ok