We need to talk about those gloves

My monitor lost signal while i was watching ur video

Brother, God bless. I just brought my PC back from the repair shop. It's 2 years old and my first build. It had a ram stick issue and that was resolved but still wouldn't connect to the monitor. So I watched your vid. What worked for me was connecting the HDMI to the GPU port instead of the motherboard. Thanks

Buddy. You have no idea how long I have been trying to fix this damn issue! The very first step worked and I kid you not I cried. 😭 thank you from the bottom of my once broken heart. You are an amazing man.

I hate how i have to watch it work for him 10 times and it doesn’t work for me

i tried everything, i changed cables, rechecked and cleaned components but for some odd reason, none of this works. it's quarantine time and i can't get out of the house and go to a repair shop. oh god, i am doomed.

Number 4 helped a lot thanks so much bro 2022 who’s here? Thanks again bro 🙏🏾🙏🏾🙏🏾

You are a legend, literally the first method fixed it, thank you so much

You used the same footage of you booting up your monitor each time

Deadass this is from like 2009. Video quality, editing style, PC wnd monitor, and even the gloves say so

Saved me a trip to a PC repair shop, amazing!

The 4th one worked for me. Thank you so much!!! I had all my saved school works in my computer. I thought I'll never be able to see them again! Thank you so much

I’m having a problem with connecting my Cyber power PC to my Acer monitor. I bought a new VGA, tested it did not work. Fixed the resolution settings by hard reset, did not work. So I am in the middle of it either being my PC or monitor, however the PC has worked on my bigger TV so I have a feeling it is the monitor.

I love how he thought wearing gloves was a good idea

So cleaning the ran work but it bring me to some wierd window reset thing help?

Your steps saved me from buying a new computer. I had no signal on my tv monitor screen. After completing all the steps, I still had no signal, but now had a new problem. Instead of my computer CPU turning on with a blue light, it turned on with a yellow light, and constantly beeping? WTH? I rechecked everything, and still no signal, yellow light and beeping sounds. I was about to quit when I didn't remember hearing the RAM Plates clicking in completely, and they seemed a bit wobbly. I got a flash light and noticed the RAM Plates weren't completely inserted. Removed them, cleaned again with an eraser and inserted them and this time it made a completely different clicking sound, checked with my flashlight and both RAM Plates were completely inserted. Turned on my computer, light blue light, no beeping sound and now tv monitor was up with a, "Reboot by pressing F1." It worked perfectly and all bc I didn't insert the RAM Plates properly. Sir, thank you again for your video, for I have no computer skills in repairs or troubleshooting. This computer was a gift and is ten years old and brought me to 2009? I changed everything and it now runs a lot quieter.💕 I have Subscribed.😁👍🏻

DANG! Removing the battery and putting them back after 5 seconds, works fine for me! At first I don't know what to do, but thanks to you it's finally fixed! Thank you so much for the help!

i have 2 monitors noe before i had only 1 didnt have issues it startes Working fine then my both monitors froze and i had to restart my pc, help?

Thank you so much I've been struggling how to fix this hehe,I thought that my mom's PC was gonna broke but I saw your vid💕💕

Number 5, worked for me. I have my pc connected to my TV and randomly it wouldn’t receive the signal. Unplugged everything, took of side cover, took out a couple of screws to unplug 3080 GPU, pulled out little battery. Pressed power for 10 seconds. Back together again. Turned on and it loaded some bios setting. Pressed f2 to load original settings, all worked great. Thank you.

Thank you!!! The first one helped. Everyone kept telling me to buy a all types of different cables. I knew I shouldn't need to.

I solved the problem with step #5. Awsome! On a Sunday with no shops to help me your video dit it! Thanks.

Thanks a lot man !! 5th step worked like magic , appreciate it a lot !!

You fixed a problem I've had for a month in the first 1 minute of your video. THANKS!

Did everything but nothing happened till I did the ram reset with eraser and it fixed mine. Thanks a lot. You saved a lot of effort.

Thank you very much. Almost all night i was juggling until i made my mind to buy new laptop worth six hundred pounds. As watch your video half way and then gave it a try and just first step did the job. Thanks again. Subscribed you and of course you deserves well thumbs up

I spent so long trying to figure it out, from taking out my ram stick and cmos battery. the solution ended up being step 4, just changing my hdmi cable from motherboard to gpu... thank you you are a lifesaver 🙏🙏

My problem is while gaming my monitor will turn black. Is it my gpu doing that?

i dont get signal until windows boot up ( cant get in the bios setting) any idea how to fix it?

Omg thankyou so much You just saved my pc!! And myself!!

From gpu to motherboard worked for me. Thank you so much. Back to gaming

Thank you for your tips. I was about to buy a new vga connector. Did not thought resetting the monitor will fix it. The first tip helped me. Thank you so much!

#4 helped me wth.. Didnt even know GPU had HDMI ports. Thanks a lot!

Thank you so much you helped me allot. I’ve been trying to figure out the problem all night

The first step solves my problem Thank you so much💚

Great video, very informative, yeah right! there are lots of factors why a PC won't display even if it turned on. The most common part is RAM memory corrosion. Overtime the memory or ram of your PC becomes corroded, and when it is corroded, the PC won't output any display. That's why you have to uplug it from the board and clean it using any pencil eraser, but be sure no to touch the copper side (the color gold) to avoid possible damage on the ram. There's a lot of other factors like the motherboard if it's defective, it won't give any display and also the power supply if it's defective even if it powered on but it's already deteriorated due to old age and cannot provide enought amper to the processor, board, memory or the monitor itself it cannot give any display.

Every time he “fixes” the thing it is the same time and same clip smh

I love how he did this in the middle of the night, really adds to it

I was losing my patience and I did all of the methods that were in the video. My computer stars now. Thank you!

Thank you so much I tought that I would need to buy a new pc you're the best

The moniter didn’t work so I bought a new one and turns out my pc the problem

the first solution worked, oh my goodness i love my life, Shouts out to bruh and his 43 seconds of service, gg's bro

The first step was the key! Thank you!

Thanks your a life saver, all the other guides I watched just wasted my time

I'm here looking for a fix and when he removed the 8 pin, I remembered I didn't plug mine hence the no signal issue. good job

Omg thank you so much I was going on a six day weekend from school and my pc broke down omg thanks sooo much 🙏

The first step worked for me, Thank you!

Amazing, thank you. It worked. The smile on my face.

Tip 4 fixed my problem

computer repair channels be balling out on these ads per second videos lmao

everyone: thank you this is very helpful you fixed a problem gets a sub. meanwhile me :yooo why the time the same

Using the same powering on video clip - very resourceful.

Thank you for your video! You saved me.🙏

mine just all the sudden just turned off and it wont turn back on with the no signal message and non of this is working 8( and the monitor is not that old either my pc

DONT GIVE UP. The replugging in RAM worked for me!!!

thank you so muchhh!!!! today is our 3rd grading summative test

No way, method 1 actually worked, I thought my pc was done for! Thanks you!

Thank you so much, taking out the hdmi and holding down on the power for 5 seconds fixed it. I am so grateful 👍👍

Smh been stuck without screen for 14 hours, video saved my life, thank you 🙏🏼

so i power on, everything lights up and fans spin. My motherboard led lights begin the boot loop. White led(4 seconds), yellow led(4 seconds), then the red led comes on but only for a second then it goes back to white led and being looping in that order. My manual says red light indicates CPU but it’s supposed to stay illuminated if there’s a problem with that hardware. I reseated everything, cleared cmos and redid bios flash, still no signal. My monitor works on my laptop, but it takes a few minutes of being plugged in for the image to show. But it works none the less. any ideas? asus b550f wifi ii and 5800x3d. brand new build so ram isn’t dirty and i tried reseating didn’t work

in some cases its ur cpu cooler fan some times if you dont put the cpu fan correctly (or the cooler corectly) it blocks the flow of electricity one of my friends had this problem so it would be worth to check that out if you have that problem

0:12 damn imagine missing

hi hopefully you can help me I have a message saying analogique gestion Alim, I have a new docking station and for my older screen the only option is vga cable, I just replaced it nothing changes please help me

Hey brother my cpu keyboard and mouse is everything working but monitor show no display even no signal too . Which method should I try ???? Pls reply it's urgent 😥😥

5:28 worked for me thanks😀😀😀

Much thx! I did the battery removal and the monitor functioned properly.👍

My problem is the screen,mouse and keybord not working and I search for days on how to fix that but a lot of them talk only on the monitor or explain with ways I cannot understand, I follow your steps in other problems I faced and you was super clear, so I will be very very gratefull if you helping me out with this... Thank you for you precious time of reading this

Thank you for your videos, they are very good. I would like to ask you a question. I was rendering a long video. Then the next day I turned on my computer and the screen is black, nothing to see. Do you think my video card or CPU burned out?

THX man. The 5th tip did for me

Step #4 - moving monitor cable from GPU to motherboard (or the other way) worked for me !! Thank you very much ♥ I was so worried :')

Thank, You help me for my first computer, thanks you so much !

7:22 I was playing around with my pc 😅 After reassembly I realised that I haven't connected 12v cpu cable 😂😂

I had this issue. First solution : Fixed Thank you I love you

Thank you so much! I never heard anyone mention unplugging, pressing the power button for 5 seconds, then plugging back in. That totally worked. You made my day!

Thank you very much bro! Was about to buy a new cable or monitor. I think the first one helped me

I was playing with resolution settings on my old monitor and all of a sudden it said input not supported which meant I chose too high of a resolution while plugged into my VGA port. After that I can only get display from my DVI port but I want VGA because by Xbox uses DVI only and I use one monitor for both. with the VGA cable, it shows the BIOS and even Windows logo but right after that screen it goes black and says no signal.

Number 8 helped me thank you SO MUCH!!!!

Thank you so much tip #1 work and I’m so happy because I thought I might had to buy a new monitor and was scared because I don’t have the money for it +rep

will a MACHINIST LGA 1150 Motherboard, H81 Micro ATX Intel 4th Gen Gaming Motherboard for Desktop PC Support 1333/1600MHz DDR3 Dual Channel Max 32G, i3 i5 i7/Xeon E3 V3 Processor, NGFF M.2, SATA 3 H81M-PRO WORK IN MY dell precision t1700?.

Damn really helped me thank you so much ❤️‍🔥

The first one *hold 5 seconds* saved my life, thank you so much!

Thank you, #4 was the problem for me.

so i been using 2 monitore last few weeks. today my pc froze.. i manually switched of holding the power button in. when i turned back on. one monitor was not working..it just kept saying the “enabling power save” messege. for that monitor i was using hdmi port on pc connected to hdmi port on monitor (as my pc only has one d-sub & one hdmi for 2 screen connection). i brought a new chord. that made it go from hdmi port on pc to dsub on monitor. it still didnt work. i cleaned the ram/cmos. still didnt work. i than swapped both dsubs on both my monitore. than the good monitor stopped working. and the monitor that wasnt working is working now? so i’m assuming the chords are fine as there brand new…im assuming both monitore are fine as either one works when i swap dsubs from one to the other. so i guess its something related to the hdmi port? sometime ago i had a bsod appear about 5 times in a few weeks. always fixed itself. i havent had a bsod for quite some times now. not sure if its related to that either 🤔

Thanks broo number 1 step make my PC turn on again👍

thanks dude you safe mu friends life!

OMG THANK YOU SO SO MUCH I COULDN'T FIND A SOLUTION ANYWHERE!!!!!! STEP 1 WORKED THANK YOUUUU

my problem is that i changed some settings in the bios and when i left bios it was just black screen. I turned the pc off and back on and it did the loud thing that it always does when it boots on but it did it infinitely PLEASE HELP!!!!

Bro you saved my weekend, that's a follow and a like

you helped me fix it in the corona time, thx dude ❤️❤️

Thanks man None of them really worked for me except taking my build apart and notice my water cooler was leaking and got a little on one of the ram stick. Was able to fix the seal on my water cooler and wipe up everything and now works

How about no cable detected? I already try to plug in out the cables and the result is still the same i tried to remove the gpu and the display came back does this mean the gpu is dead? The fans are spinning and the lighting are fine

My issue was a bad stick of ram. Thanks for the help diagnosing my issue

Very helpful Thanks

Okay I had all 8 pins plugged in and now I just have 4 and it works. Thank you!

hey thanks this helped! but I have a question, do you know why my monitor sometimes when I’m playing video games or just watching KZfaq turnes off for 5 seconds then on and turns off again for 5 seconds then on ever tho I can still move my character in game but the monitor is off for 5 seconds idk

thank you very much thank you so much I was thinking to take a new cpu because it was not working thank you the first method worked a second-time tysm !!! you are the best thank you

I don't know if it was coincidence. But just after seeing ur video i onned the computer and it became proper.....

I told myself if this video fixes my problem, I’ll sub... it worked lol. Subbed like I said 👌🏻

Thank you very much, the shaking one help me. Best wishes goes towards you.

As soon as I put on my fingerless gloves it starting working. Thank you