How To Fix Cracks In ANY Concrete Sidewalk Or Driveway Like A Pro! DIY Step-By-Step Guide!

Рет қаралды 317,019

Жыл бұрын

ITEMS I USED IN THIS VIDEO:
- BLACK+DECKER Angle Grinder Tool, 4-1/2” 6 Amp - amzn.to/458Bqmp
- 4-1/2” Diamond Cutting Blade - amzn.to/3Wc0HIm
- Masonry Chisel Set - amzn.to/3o3gRqZ
- Quikrete FastSet Repair Mortar Mix - amzn.to/3OndIgb
- Sikacryl Ready-Mix Concrete Patch - amzn.to/3Wb7hPi
- Sikaflex Self Leveling Sealant - amzn.to/437yWmC
- 6” Mason Trowel - amzn.to/3IgmoRx
- Masonry Brush - amzn.to/42MI7c9
Personal Protective Equipment (PPE) :
- Safety Glasses - amzn.to/45b5KwD
- Eat Muffs - amzn.to/3McuXyg
- Half-Face Respirator - amzn.to/42KYsOF
- Half-Face Particulate Cartridge For Respirators - amzn.to/3ImW1K2
SHOP MY OFFICIAL FIX THIS HOUSE WEBSITE! : www.fixthishouse.net
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
☕️ Buy me a coffee 🙏🏽! This will greatly help support this channel and will allow me to help more People by creating more helpful and useful How To, DIY & Product Review videos! :
www.buymeacoffee.com/fixthish...
On this video I'm going to show you How To Fix Cracks In ANY Concrete Sidewalk Or Driveway Like A Pro! DIY Step-By-Step Guide!
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#concrete #masonry #diy

Пікірлер: 154

@FixThisHouse Жыл бұрын

@Ps119 6 ай бұрын

I expect the crack will reappear because there is nothing of any strength holding together the two sides of the crack. Filling in like this only works if you first create a good bond between the two sides of the crack, typically with epoxy or with metal fasteners (I use 4mm diameter gr 304 stainless rod that won't rust and is cheap. Also, when you fill in the crack with mortar you need to first make the concrete quite damp so the mortar sticks to it and it helps to also apply a bonding agent (typically liquid) as well. Step one - open up the crack like in the video though you don't need smooth edges but in fact rough irregular edges are better because they aid bonding. Step two - brush or blow out crack to get rid of loose material. Step three - wet the concrete crack. Step four - while the concrete is still very damp but not wet, brush on a bonding agent. Step five - fill in the gap with mortar (cheaper to make your own with one part cement, three parts coarse sand, and two parts patching compound). When the mortar is still damp, brush like in the video and then sprinkle over it some sand of a shade that best matches the colour of the surrounding concrete (Reduces the white bleached look) or brush on a soupy mud mixture made from water and plain old dirt to make it look like old concrete. Optional Step 6 - to hide the repair completely, apply a concrete resurfacer to the entire concrete pad/path/ driveway or whatever, or paint it.

@hayitsj21 Жыл бұрын

Sacrificing your driveway to let us know how both look/work. You are the man! Great video as always bro.

@you2449 Жыл бұрын

Yeah, this is an amazing demonstration.

@FixThisHouse Жыл бұрын

Thank you so much Jay! 🙏🏽😊

@jackharbin1864 10 ай бұрын

Try a crack chaser for your angle grinder

@brute_force_and_ignorance Жыл бұрын

I'm thinking that you could have saved the dust and debris from the angle grinding to put on top of your patch, which would allow a better color match and blending to the original surface

@MovieMakingMan Жыл бұрын

That was my thought too. I’m going to use concrete to sprinkle on top and then lightly press it into the still wet patch material. I’m going to sift the concrete to remove large rocks first.

@Davidculshaw70 2 күн бұрын

Correct…it’s the same it’s wood when you drill a hole save the sawdust and then mix it with glue, fill the gap with the sawdust job done can’t see the hole

@gh-dw3tg Жыл бұрын

Another great video.....I like the Quickrete quick repair mortar as it blends better and single application. Keep rockin!

@MrJwyne 8 ай бұрын

Your videos are great quality and informative. Thank you!

@80sCa Жыл бұрын

I like the convenience of the pre mix but the add water mortar looks better color wise

@FixThisHouse Жыл бұрын

I agree Cathy 👍🏽😊. Premix will work best for light tone concrete only.

@MrMittens1974 11 ай бұрын

A good tip is to crush up all the stuff you took out and sprinkle it on top of the mortar while it's drying to try and disguise the repair.

@janebrown7430 Жыл бұрын

Thank you for this interesting topic and informative video!

@vbl20012k7 Жыл бұрын

Thanks a lot your video. It”s very useful for me because there are a lot of cracks on my drive way, the same as you have exposed aggregate concrete. I see some people using pea gravel toon top surface so it can match to the rest.

@chuckrann6282 Жыл бұрын

Quickcrete repair mortar. Great job!

@jeanchance9334 Жыл бұрын

Good information! Enjoy you how-to-videos!

@FixThisHouse Жыл бұрын

Thank you Jean! Means a lot! 🙏🏽😊

@Pallidus_Rider Жыл бұрын

Thanks for sharing 👍

@emcinc9654 11 ай бұрын

The best is to use a crack chaser wheel in your 4” grinder. Then backer rod in the widen crack then self leveling Sika Flex joint compound. I’m a retired contractor and did many cracks that way.

@theamerican4609 6 ай бұрын

That would be for an expansion joint and eould look like caulking in the middle of the slab...this is a crack that should disappear

@grahamd5418 Күн бұрын

There's always someone that knows better!

@buterdhams Жыл бұрын

This works and Great video. It I hate that I can always notice my repairs with this stuff. But it is what it is

@FixThisHouse Жыл бұрын

Thank you Mike! Yes unfortunately the new will stick out from the old, but over time it will eventually blend in 👍🏽😊

@aldiminico6513 Жыл бұрын

I’ve tried many concrete fixes over the years. The best for cracks, for me, is Sashco products, Gray Slab which comes in a convenient tube for a caulking gun. IT STICKS, STRETCHES & STAYS.

@KrustyKlown Жыл бұрын

Yes.. the dudes concrete cracked because concrete doesn't "stretch".. so the patch must Stretch, or it wil crack too. Thanks for the product tip... I have some repairs to do!!

@slydog7131 Жыл бұрын

I've heard of that product, finally found it at Lowes.

@grilledflatbread4692 9 ай бұрын

@@KrustyKlown I like self-leveling sealant. It's a bit pricey thought. Pair it off with caulk backer rods to save material

@netsurfer2975 11 ай бұрын

Thanks for the tutorial. It would be great to see the way it looks after full cure and a little wear on it. Personally if the crack repair remains quite visible then i would have gone ahead replaced a little larger panel for aesthetics. That is not a criticism just personal preference. Great video.

@brianhall8097 Ай бұрын

Good video you did a good job I just have one suggestion that I do for blending in with old concrete whether it be cement to fill in a crack or that light gray caulk I'll usually let it dry to 50% dry and then smear black dirt on top of it and leave it to dry rest of the way and it pretty much Blends in with the rest of the cement. It was a tip I got from an old Mason works pretty well

@billrobbins5874 9 ай бұрын

Appreciate your video. Have a vertical crack right down the middle. Been thinking of fixing it for years. 🤢

@stonedoliveees 10 ай бұрын

Kintsugi...came to mind when the same thing happened to the concrete path...but with leveled river stones and pea gravel...kinda inspired by those river tables....maybe opening up those cracks to fill in with fun and treasure.

@kevinberniebarron7548 7 ай бұрын

Good idea! I had a question to ask; wouldn't it be better to have the 45 degree angle a reverse 45 degree angle? That way it would be less likely to pop up; the 45 degree angle would hold the mortar in place. I appreciate your input and thanks for the video and idea! Blessings to you and your family, Kevin Barron

@blondebobbi4505 Жыл бұрын

I really liked the match up with the Quick-Crete. Does the Quick-Crete repair mortar come in a tube? Thank you.

@leterfly Жыл бұрын

I like the one in the caulk gun tubes, did it 5 years ago and still holding, thanks for the video

@FixThisHouse Жыл бұрын

Thank you for the input! 🙏🏽😊

@richardpowers4200 Жыл бұрын

Nice vid! I have added a little aggravate and sand to the top to match like an “art project”. I am not sure if that will ruin the integrity of the mortar? I use Dow Seal, but it’s expensive like $20 per sausage. Loved the tips on expansion joint vs. crack. That was super helpful bc I treated them the same. Your way creates a better line. I used a rotor hammer chisel that works well.

@FixThisHouse Жыл бұрын

Thank you Richard for your input and sharing your experience! 👍🏽🙏🏽😊

@Kathleen253 Жыл бұрын

I like the Quikrete. I have watched some videos by an old school mason from Pennsylvania, Mike Haddock. He puts a mud slurry over his concrete patches to give it that used look.

@FixThisHouse Жыл бұрын

Thanks Kathleen for the input! I would love to see how that mud slurry technique would look like 🙏🏽😊

@rickvb2709 Жыл бұрын

He also dampens the concrete before he fills it to make it stick better.

@Arabeon Жыл бұрын

Thanks for the video, I have a huge crack on my driveway going horizontally, I wish you were near by to give me your opinion. I might try your method to close it.

@mikereid1195 Жыл бұрын

I gotta say, the 45 degree angles were backwards...if you have the bottom of your repair area wider than the top, you don't get pop-outs from the freeze thaw cycle. If you're in an area that never freezes, it's not that big a deal, but in northern climates, you need to "keyway" your repair.

@nomoreliberties 7 ай бұрын

How do you keyway a repair as I live in northeast now

@mikereid1195 7 ай бұрын

@@nomoreliberties gotta make the hole wider at the bottom than at the top, that way the freeze-thaw cycle doesn't push the repair out

@nomoreliberties 7 ай бұрын

@@mikereid1195gotcha thanks

@raycootz9420 Жыл бұрын

Do you have a video for asphalt cracks?

@williamdenny891 9 ай бұрын

Very good video 2👍

@FixThisHouse 9 ай бұрын

Thank you so much! 🙏🏽😊

@catholic3dod790 7 ай бұрын

Okay, I will try it.

@changuito10 8 ай бұрын

Every crack like that becomes an expansion joint that moves with thermal variations. So it is more convenient fixing it with a self levelling flexible compound, uness you cross stitch the two sides with pre-drilled dowels, and then you can use a rigid expansive mix.

@jimgordon3468 7 ай бұрын

I used a chisel and made a1 to 2 inch GAP in my crack. I left the jagged edges and a lot was 45 degrees under. Then I used concrete bonding agent. Used paint brush and applied very liberally to all surface area inside the crack. Then I dry poured mortar into the crack. Tapped a hammer on both sides of the crack. I used a trowel to level, I used the mist setting on house and done. Applied water every hour for 4 hours. Came out perfect.

@larrygerfen2801 9 ай бұрын

Add on surface the mortar powder pushed into the pre made to better match surface color.

@ronm6585 Жыл бұрын

Thanks. 👍🏻

@FixThisHouse Жыл бұрын

Thank you Ron! Please Send me an email when you get the chance! 👍🏽😊

@larrypahl5756 7 ай бұрын

thanx4post

@FixThisHouse 7 ай бұрын

You are most welcome! 🙏🏽😊

@jt9498 Жыл бұрын

I'd use the Quikrete mortar repair, as it blends in better with the existing concrete.

@mr.l6982 3 ай бұрын

Fill the cracks with GE 100% advanced black silicone! Works great!

@Aaron-nn8vk Жыл бұрын

I personally would use this for damaged concrete etc.. to fill cracks like this I would still use a flexible product like the " sica crack flex sealant " because that's most likely going to crack again with more movement unless you correct the root of the problem, the foundation underneath. Nothing against what is going on here, just me personally and how I personally feel about the situation. Great Video!

@theamerican4609 6 ай бұрын

Using sika will look like you git caulking in an expansion joint...horrible...this is a crack that you want to make disappear

@BlankBrain 8 ай бұрын

I cut vertical sides along the crack. I can only go 1" deep with my grinder. I cut strips of 1" felt paper and put them in the crack. I mixed 1 part Portland with 2 parts sand to make mortar. i used the trowel to work mortar in on both sides of the felt paper. Fixing cracks in concrete is always temporary. The felt paper will allow for some expansion, which is why the crack formed in the first place. When it cracks again, it will likely follow the paper, rather than make a jagged mess.

@johnmanzella7696 7 ай бұрын

I always use the repair morter because it's has a very high psi count and it doesn't shrink and color blends right in

@ibfrosty08 2 ай бұрын

Sprinkle some silica sand on the repair material while its still kinda wet, once its dry blow off the extra. Blends really nice.

@11111Rich Жыл бұрын

I'm just a lay person but my thinking is the crack is due to ground shifting. Where I live the soil is heavy clay. If I am correct the joint should have flex in it and because of that I would have used a silicone based filler. I like the idea of opening up the crack with angle grinder. Look forward to other comments

@FixThisHouse Жыл бұрын

Thank you for the input my friend! 👍🏽😊🙏🏽

@slydog7131 Жыл бұрын

Exactly what I was thinking. By filling it with the inflexible mortar, I would think that the crack will just reappear. Perhaps an expansion joint would have prevented the crack from forming in the first place. But in this case, the crack also goes across the asphalt, so it is not due to simple expected expansion but from other forces like shifting ground or tree roots. I would have gone with the flexible concrete caulking. I would like to see a follow up video showing how the mortar patch holds up, or a video showing examples of how well both types of patches last.

@roberttai646 11 ай бұрын

How old was the crack? Years, months? The ground might have shifted and then settled. If it stopped settling, I think the mortar would work well. It would be nice to see a one-year update on this repair.

@lkenady52 11 ай бұрын

My driveway cracks were filled with the flexible guys and it shrunk and looks awful. Lasted about a year or less! I now am going to try exactly what this video suggests.

@changuito10 8 ай бұрын

You are correct

@alexgarcia8365 2 ай бұрын

I have cracking on my drive way will this method work good for this? Or should I try another method. Please provide recommendations I plan on doing this in about 2 months

@MariaRodriguez-gc9jk 5 ай бұрын

Can a watery slurry of Portland cement be used at first so it can go deep down the crack? Then after it dries up, apply some kind of concrete sealent on top?

@davidcole8200 8 ай бұрын

Lots of good comments. As far as adding the ground up powder for a color match. I would say dampen it first. Drawing out too much moisture too quick as powder can do may cause cracking. Letting it cure in direct sunlight, especially on a hot day might not be such a good idea either. Rapid drying may cause cracks. Laying something over it to block the sun might be a good idea.

@user-fv5iu2zj1s 6 ай бұрын

Do you have a solution for leveling my garage floor ? A number of years back I used to much pressure in power washing garage floor and etched a good number of areas and left a lot of areas very very rough… how do I cure that?

@jpascua3824 11 ай бұрын

Hey my friend, I enjoy your videos and gave me pointers on certain projects. I do have a question with exterior wall seal and cement slab. Can you recommend a product that seals the transition between the bottom of an exterior stucco wall with the adjoining cement slab? I appreciate your help. Thanks.

@FixThisHouse 11 ай бұрын

Thank you so much! Please send me a picture on my email 🙏🏽😊

@jpascua3824 11 ай бұрын

@@FixThisHouse Will do. Thank you.

@govinda102000 11 ай бұрын

I’m in Italy and about to do a slightly wider gap early AM. Using instant cement at 92 degrees forecast in the afternoon. I’m ok with that drying temp?

@AntLive29 7 ай бұрын

How long is it took to did the angle grinding?

@Ultrarmx Жыл бұрын

I’ve been looking for a video on best way to fix cracks on driveways. Your 2 days late and already used the Ready mix one and I think the mortar looks better. 😔

@MotherFynest 11 ай бұрын

I like the idea that you give me a choice ☺

@sachmo0196 9 ай бұрын

On another vid you made for cracks, you used a "sand" type (1/2). To blend in the color to the surrounding area, couldn't you put some of that sand on top? It appeared to be multi-colored.

@moconno1 6 ай бұрын

Stick with the mortar mix👍😎

@SamKGrove Жыл бұрын

Use a power washer or chemical (bleach) to clean up accumulated algae on the concrete (that's why it looks dark). When you patch, the color will match better. Also, use a rough wet sponge to blend the sides into the existing concrete.

@Esiddik Жыл бұрын

Heyyyy…. 😢 I wanted to see the final final look once fully dry in case it looks different

@charlesdavaro8554 4 ай бұрын

How long did it last?

@AJTramberg 3 ай бұрын

Is there another finishing step? This looks pretty labor intensive for a so-so result aesthetically.

@NDFlyFisher Жыл бұрын

Do a video on repairing the asphalt crack please.

@FixThisHouse Жыл бұрын

Hi Rick! I will tackle that next my friend! 🙏🏽👍🏽😊

@NDFlyFisher Жыл бұрын

@@FixThisHouse Excellent. I have a couple big cracks in my asphalt.

@5Iron Жыл бұрын

I would lean towards using the flexible stuff. That crack is there due to settling and if (big if) the settling continues over time it will crack again.

@thevoiceofthelordpastorkei7165 Жыл бұрын

I definitely think the first is better. Matches your driveway better and looks like just a one time application vs a two app. With the other. But Its funny that your video came up today because I'm actually getting ready to do my driveway.

@FixThisHouse Жыл бұрын

Thank you so much for the meaningful comment my friend! Sikaflex will be good on expansion joints to allow flex, but for 150’ long fix I would with the quickrete my friend 🙏🏽😊 I wish you the best on your project! Email me if you need help on anything 👍🏽😊

@thevoiceofthelordpastorkei7165 Жыл бұрын

@@FixThisHouse Thanks so much for not only replying but for such a speedy reply. I will and thanks AGAIN so much.

@BobBohner4851 Жыл бұрын

I’d like to see the finished dry patch to see the final result. Won’t it just crack again?

@davidstreling3690 Жыл бұрын

@@thevoiceofthelordpastorkei7165 i hope you stayed with the sikaflex as you are repairing a crack,which was caused by the concrete and ground movement, hard concrete or patch will just crack again or come loose, the flex will stick and shrink and expand as needed

@cherylteach-in70berent5 Жыл бұрын

Thank your helper. Safety lesson & great assistant-It’s how I learned from my Dad too.

@jes1413 8 ай бұрын

What do they look like dried, please?

@tedm4932 3 ай бұрын

I like the product Crack Weld , very good product. He( Ray's Concrete ) recommended it with 40 yrs experience. It blends in works well !

@terrymaine4121 2 ай бұрын

Where can you purchase crack weld?

@tedm4932 2 ай бұрын

Well, not sure if Lowe's or Home Depot has it , have not checked there. But I ordered mine from Amazon.@@terrymaine4121

@alwatts4108 10 ай бұрын

The cement you recommend would not hold up in cold weather (east cost ) due to snow and cold weather

@leonardcollard5345 7 ай бұрын

1) For safety, they make chisels with a protective ring near the top so you don't hit your hand with your hammer. Also, after I used the ready-mix product, I read the fine print closely. The last line in English stated that it should not be used where there is vehicular traffic, which would be a driveway.

@rareform6747 7 ай бұрын

Use Sika that expands contracts !!!!

@tonyantonuccio4748 Жыл бұрын

Rule 1 - concrete will crack if it has insufficient tooled and expansion joints. The purpose of tooled joints is to control the cracks, hoping they follow the joints. However, since your crack extends through the adjoining asphalt, the sub surface preparation/compaction is the likely culprit. Rule 2 - Crack repair only lasts through one or two freeze/thaw cycle(s). Also, the crack often returns in parallel adjoining areas, leaving a bigger crack to contend with. Check out what the pros do for tennis court cracks. The cracks always return. The sub-surface prep work was deficient.

@Vincerama 3 ай бұрын

Don't you have to undercut the edge so that the patch material doesn't just pop out?

@MichaelGuy 11 ай бұрын

The crack was more natural. But the big fat white stripe you just put in/ PRICELESS!!!!!!

@FixThisHouse 11 ай бұрын

That or rubber Sika 👍🏽

@JeremyB8419 24 күн бұрын

In petrochemical industry, we require face shields for angle grinders, also. Too many people have had the wheel fly apart and had pieces go into their face.

@mr.goldenrod291 Жыл бұрын

Patch will pop out within 12 months as water intrudes and slab continues to move. Use urethane glue (resin) to seal the crack through the thickness of the concrete slab, and then top dress the cured glue. Even that will not last as there is probably a root or underground utility under the slab continuing under the blacktop.

@huyked Жыл бұрын

I'm guessing when fully dried, it looked like what the edge looks like. My suggestion would be to wait a day, take an "After" video and include in the video before uploading.

@trail457 7 ай бұрын

I think I would have sprayed a binder in the crack before putting in the concrete mix.Cement doesn't stick well to dry cement.

@BloodAsp Жыл бұрын

I have to wonder what you think about sidewalk joints that are extra large. I just blew the dirt and grass out with the pressure washer but they are now fairly substantially sized.

@FixThisHouse Жыл бұрын

Hi! Are they expansion joints or cracks? Could you send me a picture on my email? Fixthishouse1@yahoo.com

@BloodAsp Жыл бұрын

@@FixThisHouse Just expansion joints. -I would email, but I'm now away from that property, thanks though!

@cherylteach-in70berent5 Жыл бұрын

Proper prep and backing rod.

@juicer52 10 ай бұрын

I recently redid the caulking between pool coping stones and concrete deck surround. Also resealed the space between the coping stone and waterline tiles. These areas flex in the northeast freeze/thaw cycles with any water penetration. If expansion joint (or even large crack) use close cell backer rod and Sikaflex Concrete Fix No-Sag Concrete Crack Filler Repair Polyurethane Sealant. I have used the self-leveling version thinking it being more runny, it would adhere to the side walls better. Switched to no sag for vertical application. Self leveling version comes in gray or tan. No sag also comes in white. Tape off the seam with masking tape. Before it skins over, sprinkle on sand or any grindings you have if you created any in prep. Remove tape right after sanding and touch up whatever has pulled away. Let set for a day and dust off extra sand. In my case, I only sanded the horizontal repair. The area between tiles and coping stones were left white matching the tile grout. Sorry, I can't figure how to attach a picture.

@timm2845 11 ай бұрын

How does it look after a year?

@FixThisHouse 11 ай бұрын

Play stay tuned! I’ll do a half year later video! 👍🏽😊

@SystemsPlanet Жыл бұрын

My wide would kill me if I repaired our drivway like that

@montrose5paulina Жыл бұрын

You should do a video on how to stop toilet tank sweating on the outside if you know.

@YesiPleb Жыл бұрын

Great video but if someone's got the ability to use an angle grinder I would have thought they'd have the ability to mix up some sand/cement mix themselves to fill the gap in. It's like filling the cracks in a wall - scrape it out to make it bigger and fill with filler then sand. Except in this instance you don't sand it, you brush it before it dries :)

@safiali318 7 ай бұрын

Just open the garage door! Will make the job so much easier

@kimjordan1516 10 ай бұрын

Quikcrete

@KrustyKlown Жыл бұрын

It Cracked for a reason.. that patch will crack too, unless the patch material is compliant, mortar is not.

@MovieMakingMan Жыл бұрын

I’m about to fix several cracks but I wonder why people don’t sprinkle on a little bit concrete on the still wet patch to match the texture of the rest of the driveway. It would make the patch virtually disappear. Of course you’d want to remove the largest pieces of stone from the concrete before lightly pressing it into the still wet patch material. I also will be repairing a few expansion joints using rubber tubes and covering them with a liquid patch material. Once I Apple the liquid patch I’ll sprinkle sifted cement on the still wet patch material.

@stevec9669 Жыл бұрын

One time I removed the guard from my angle grinder (Don't remember why I did that).Then I cut my finger in no time. Lesson learned. Never do that again under all circumstances.

@FixThisHouse Жыл бұрын

I’m glad you’re ok, but yes do not remove. They are there for a reason 👍🏽🙏🏽😊

@nomasker1360 2 ай бұрын

Should have just put sand on top so it looks more like the weathered concrete

@hlneira 9 ай бұрын

From Crack to the GRand Canyon ,

@aaronfagerstrom34 9 ай бұрын

Nice work, but definitely not how a professional does it

@ericbutler-ow6ot 9 ай бұрын

the job is good but the visual needs a little more work.

@mdillon4311 10 ай бұрын

Can you use a commercial shrinkproof concrete mix? I found it at Menards and since the cracks in my driveway are older and wider. I thought this may be a good option as Ive had the shrinkage problem where I live fixing a repair in the past. I also wondered if anyone would think of using a can of flexseal in with the concrete to strengthen the adhesion to the existing concrete?

@TMT915 Жыл бұрын

Pull the grinder down toward your body dont push the grinder up

@FixThisHouse Жыл бұрын

Thank you for the safety tip 🙏🏽😊

@TMT915 Жыл бұрын

Also have some water on hand to cool that blade, it'll will help the longevity of the blade and it makes it easier on you

@MovieMakingMan Жыл бұрын

What do you mean? I’m about to fix driveway cracks and I’m unsure what you mean about using the angle grinder. Thanks.

@luigilaurenza8990 11 күн бұрын

Missing most valuable info. Follow-up months later.

@darlalove 11 ай бұрын

It will crack again and again 😂😂

@TrashyLobster Ай бұрын

What he’s is using is for patch/repair, not for cracks that will continue to move. Need to use a concrete flexible caulk.

@sarahturps1384 8 ай бұрын

So it'll match a little better??? Why didn't you show that? It looks terrible.

@richj5953 11 ай бұрын

Why is this guy pushing the grinder??? You have terrible control like that, and if it catches something, the grinder is going to jump right back in his direction, his arms and body.. Always use a grinder so it is pulling away from you, so if you lose control, it will go away from you and turn off out of your hands....

@donbaxley5530 7 ай бұрын

Lol, at first I thought that was an overhead of a Muslim demonstration against sanity!

@syntecsmurf Жыл бұрын

Too much work. $14 bottle of Quickrete crack repair. Squeeze into crack and dust over with matching dirt or sand while still wet. No grinding. Save time and money.

@billrobbins5874 9 ай бұрын

Does it last?

@syntecsmurf 9 ай бұрын

@@billrobbins5874 all that Ive used years ago is still in great shape

@timteevin4517 11 ай бұрын

If you use the stuff in a tube, you will regret it.

@mdillon4311 10 ай бұрын

What does it do?

@chrisholdroyd3555 Жыл бұрын

Or... save yourself $50 and five hours of work and just spray it with RoundUp!

@g.b.5206 Жыл бұрын

Not a very good job my friends, fist use a crack trace weel that will create a v shape inside the crac all at once second you can use a self level cement and fill the crack and before he drys por our some aggregate to mach the original pavement an that time you can brum it at the level and that will be a finish job my friend

@FixThisHouse Жыл бұрын

Thank you for the advice! 👍🏽🙏🏽😊

@johnmanzella7696 7 ай бұрын

And don't forget to use a metal cutting blade your achieve straighter lines nice and neat