How to fix curving bbs Airsoft barrel hack for better grouping & accuracy.

Рет қаралды 10,322

9 ай бұрын

Hope this helps anyone having accuracy issues. Or swerving bbs I have tested so many different barrels hop up chambers, buckings , gear box shells and other things to get improved accuracy with bbs. This hack actually makes the best improvement for the littlest amount of work and $. Good

Пікірлер: 43

@CA6.9 9 ай бұрын

I was wondering how to fix that 😂

@mattworley7043 3 ай бұрын

Such a simple but effective idea

@Reaper-uo1dx 9 ай бұрын

My mind is blown... ive always wondered how to fix this😅

@jovannyfeliciano6604 4 ай бұрын

Keep it up with the tips. Mind blown ideas

@JJMoore 4 ай бұрын

Thanks my friend

@EXDna Күн бұрын

I run a super thick oring around the barrel in my hicapa, right against the hopup unit. The squish when the outer goes on is a sure sign, and the long range accuracy is halved or better on both x,y axis

@wrenchtheroo6557 Ай бұрын

I wrap teflon tape around it, its less permanent and can be adjusted to your needs

@_gusis_36 9 ай бұрын

I need to do this to my pulsar setup, cause damn that double eagle outer barrel ain’t that good

@daltoncarter7147 9 ай бұрын

Thats a great tip

@frankcastle4194 9 ай бұрын

Good stuff 👍

@Goober-2005 9 ай бұрын

That’s actually really smart,although I could see that as a slight problem when trying to take it apart? Very interesting though

@JJMoore 9 ай бұрын

I cut them off if I service the barrel or hop up and replace them

@Jed_Rippy 9 ай бұрын

🤯👍

@lancealat3791 3 ай бұрын

You think you could use tape if you wrap it enough

@nickthedane1 9 ай бұрын

Its funny, because with firearms you actually want the barrel to be 100% free-floating, only thing thats mounted/has contact is the chamber, and with airsoft its the complete opposite. I think its the same thing with airsoft, but because the inner barrel is not a beefy steel barrel that cant move at all it ofc moves alot, but I think the right way to do it might be to only stabilize/center it at the end of the muzzle and at the hop up, maybe this is better than tape etc all the way aruond the barrel, just a thought, nice content 😃

@JJMoore 9 ай бұрын

Very true, I’m having some barrel stabilizers made that are removable now hopefully I will have a prototype this week. 😁 thanks for your thoughts I love hearing feedback.

@nickthedane1 9 ай бұрын

@@JJMoore nice keep at it 😁🤙

@JasonFolk07 9 ай бұрын

What i do is double up on the spring tensioner my doesnt move at all

@Terminatorbart 9 ай бұрын

👍

@6.strinGs 9 ай бұрын

When will you guys be doing the giveaway I have all notis on I’m just a busy kid and afraid I’ll miss it

@JJMoore 9 ай бұрын

Few more hundred subscribers it will be soon as we hit 20k Mabey a week or so. If I had to guess

@6.strinGs 9 ай бұрын

@@JJMoore ok Ty

@GabrielMartinez-fy1pw 8 ай бұрын

JJ what are your thoughts on the amped airsoft HPA package?

@JJMoore 8 ай бұрын

I buy all my hpa lines and regs from amped I love amped products

@sxmzy6431 9 ай бұрын

hey jj, i understand you have worked with kwas eve series, what do you think the best cylinder head for the stock tappet plate is?

@JJMoore 9 ай бұрын

I use the rocket cylinder head on them

@sxmzy6431 9 ай бұрын

@@JJMooreis there any fps loss or gain, just need to replace mine lol

@sxmzy6431 9 ай бұрын

i also see a lot of lonex cylinder heads, have you used any of them?

@JJMoore 9 ай бұрын

@sxmzy6431 I don’t like to use lonex cylinder heads I use the lonex piston heads a lot but the cylinder heads are so hard to get in the cylinders

@sxmzy6431 9 ай бұрын

@JJMoore do the rocket heads have any compression issues with the proprietary kwa eve tappet plate and nozzle?

@daneself858 8 ай бұрын

👍👍😎

@ryu-yuta9259 7 ай бұрын

also, oring can do the job

@wote2760 8 ай бұрын

how do you tighten the heatshrink around the inner barrel?

@connerjones9676 7 ай бұрын

You can use a hairdryer or a heat gun

@tipzy7730 8 ай бұрын

great idea with the heat shrink! but his will just make it more consistent, "curving" bb's come from off center over hop, no?

@JJMoore 8 ай бұрын

This is used for fine tuning and after you have it aligned and want it even better. Tighten up that pattern.

@tipzy7730 8 ай бұрын

prtty much what i said... except for answering the question. thanks tho!

@ilan072 9 ай бұрын

What size heat shrink is this? I never could quite get the size right

@JJMoore 9 ай бұрын

I will get you the size when I get back in the shop

@ilan072 9 ай бұрын

@@JJMoorethanks JJ!

@franciscojavieramezcuafern1209 2 ай бұрын

@@JJMooresize? Thanks !