👍 Watch how to fix various errors and problems that may appear when you are using a USB flash drive. For example, the computer cannot see a flash drive, the flash drive became smaller, the flash drive is recognized in RAW format or Windows cannot recognize its file system, or you see the message ‘Insert disk’ when the flash drive is already connected and so on. I would like to note that these problems and the methods to solve them are also relevant for dealing with external hard disks and memory cards.
Recovering Files From a Flash Drive That Requires Formatting - hetmanrecovery.com/recovery_n...
Сontent:
0:00 - Intro;
0:33 - When you try to open a USB flash drive connected to your PC, Windows gives the error "Insert disk into device". What to do ?
0:59 - Run command line as administrator
1:55 - Full cleaning of the flash drive partition table
2:46 - Formatting a flash drive
For example, when trying to open a flash drive connected to the computer, Windows flashes the error ‘Insert disk.’ One quite easy and very effective way to solve such problems would be cleaning the disk and its partitions with the help of ‘Clean’ command and the ‘Diskpart’ tool. It is very important to remember that this process will erase the entire disk, so make sure that you have chosen the right device, otherwise you risk to delete data from the wrong disk.
So, to begin with, right-click on the Start menu and click on Command Prompt (Administrator). Before you continue, make sure that the USB drive, memory card or external hard disk which you are going to clean are now connected to your computer. Then enter the command "Diskpart" and then "list disk". Now we can see the list of all disks installed in this computer. In my case, I need to clean the flash drive marked as Disk 5. Be careful! If you choose a wrong disk number it will be erased and important data may be lost. After that, enter "select disk 5". That is, this command chooses the particular disk and all actions will now affect this disk. To clean the flash drive’s partition table, type in the command ‘Clean’ and press ‘Enter.’ After the process is complete, we can see a report saying that ‘Disk cleanup was successful.’ Now enter ‘Create partition primary’ (this way we create the main partition in the flash drive) and use the command "select partition 1” to choose this partition to work with. Now we need to format the flash drive in the chosen file system (for example, NTFS). To do it, enter the command "format fs=ntfs quick" (that is, we perform quick drive format). If we take away the word ‘quick’ then we will get regular formatting which takes up much longer. For example, let us choose quick formatting, press ‘Enter’ and wait until the process is 100% completed. Then assign a letter for this flash drive (for example, М) with the help of this command: "assign letter=M". As you do that, finish the work of ‘Diskpart’ with the command ‘Exit,’ close the command prompt, go to the Explorer and now we can see that our flash drive is completely operable. Just as an example, I will create a folder named ‘Test’ on this flash drive. As you can see, the drive works perfectly, and there are no problems.
If you liked this video, click the Like button below and subscribe to our channel to see more. Thank you for your attention and good luck.
Other videos: #FlashDriveNotRecognized, #FixFlashDrive, #RAW, #diskpart, #clean, #NTFS.