How to Fix GIMBAL Motor OVERLOAD error on DJi Mavic Pro from Start to Finish

Рет қаралды 140,373

6 жыл бұрын

Do you have Motor overload on your Mavic PRO?
Instruction how to reassembly DJi Mavic PRO Gimbal Will probably help you Fix This motor overload problem on your Mavic Pro
This video is here to help you replace ribbon cable on you Mavic Pro with can help you FIX you Motor overload gimbal problem
Aircraft Motor overload error on app can be fixed if you will change flex cable on your gimbal
This gimbal ribbon cable is so sensitive and small damage get bring this overload error
Ribbon cable damage can be from crash small or big one or I see damaged flex from transporting your mavic pro without gimbal plastic holder with been this problem on this video .
For 90% motor overload on mavic pro is ribbon cable damage and another 10% can be something else
If you don`t have video signal you will need Signal cable as well
is the cable just next to ribbon cable an is more easy for change just follow cable and gently replace.
I can`t find any damage on original flex by just simply look but under microscope I find very small damage on top
After i change flex there is no motor overload on gimbal any more if your one still have that problem you are probably damaged new flex as well
like I set on video you must be very careful to do this
if you repair is successful and you don`t have any more motor overload on you mavic pro you can buy this 64GB SD CARD to make your mavic happy with plenty of free space for your new video :amzn.to/2kzenw3
please if this video help you click like write comment as I like to hear I help you and if you like my channel please subscribe and big thanks you can say over my donation button or this link
paypal.me/frogtechtips
all donation will be use for create better content thanks
paypal.me/frogtechtips
Thanks all for any size on donation :-)even 1pound is nice
FROG TECH TIPS AMAZON STORE for all staff you will need:
www.amazon.co.uk/shop/frog-tech-tips
If you have any question or you like see something else from mavic please let me know I will try do that as well
if you need link for ribbon cable or signal cable write comment and I will more that happy answer and help you find best deal
or if you need repair by professional let me know as well
for AliExpress worldwide flex buy here
s.click.aliexpress.com/e/_mKi2OqG
and other parts here
s.click.aliexpress.com/e/_mqp2pNe
Amazon UK:
link for ribbon cable : amzn.to/2jYFqnu
if you engine is broken buy this for repair :amzn.to/2G7cDqH
full part gimbal :amzn.to/2D1o136
if you prefer ebay UK use this link :-)
ebay.us/icgBrE
for best choice look on this link :
ebay.us/QL26HS
if you are scare replace flex buy this :
ebay.us/EwsXSK
or this full part :
ebay.us/ZcRBuY
if you prefer ebay USA use this link :-)
for flex : ebay.us/ILblBW
for full part :
ebay.us/ohT8R8
this link is for best choice :
ebay.us/3wAqqR
Do you like get repair by professional
If yes check :
Spark Angels KETTERING - go to his website and book repair
sparkangels.co.uk
Good news Mavic Pro 2 is out and here is link for buy this new toy if you like upgrade :
Mavic pro 2 is out check this link for buy it now :
amzn.to/2N7qsUW
ebay UK:
ebay.us/Mmucui
ebay US :
ebay.us/g3rU4p
Amazon UK :
MAVIC PRO 2 :
amzn.to/2I7OHle
MAVIC zoom 2:
amzn.to/2Dnm98n
Please if you like this video click like and subscribe as well
if you like contact me write comment below or Email
frogtechtips@gmail.com
BIG NEWS YOU CAN ORDER FROG T-SHIRT NOW JUST CHECK THIS LINK teespring.com/en-GB/shop/FROGTECHTIPS
Please if you like this video click like and subscribe as well
If you like my channel and you would like support me click on donation button :
www.paypal.me/frogtechtips
- easy support use affiliate link for ebay - ebay.us/wPn1l8
- FROG AMAZON STORE : www.amazon.co.uk/shop/frog-tech-tips
- for permanent support go to -www.patreon.com/frogtechtips
Thanks so much
if you like contact me write comment below or go to my Facebook
Frog - Tech - Tips / frogtechtips
or send me message to - m.me/frogtechtips
twitter @frogtechtips
Instagram - frog_tech_tips
Thanks again for watching
If you like my channel and you would like support me click on donation button :
www.paypal.me/frogtechtips
Thanks again for watching
NOW YOU CAN BUY FROG TECH TIPS T-SHIRT AS WELL JUST CLICK ON LINK : teespring.com/en-GB/shop/FROGTECHTIPS
-~-~~-~~~-~~-~-
Please watch: "Frog - Tech -Tips / Channel teaser /watch this to find out what's is about on this channel"
kzfaq.info/get/bejne/oa-IZ7SVzdOmfqs.html
-~-~~-~~~-~~-~-

Пікірлер: 248

@frogtechtips 6 жыл бұрын

I hope this video help many people and if you like say thanks to me you can use Donation button on main page,buy flex or part you need over link in description and big thanks everyone who make decision donate something to me :-) paypal.me/frogtechtips

@frankmasterp3025 6 жыл бұрын

Frog - Tech - Tips where I can command this gimbal part for my Mavic Pro please send me the link

@frogtechtips 6 жыл бұрын

Pohla Frank some link is in description chceck that and if not the one you need write me exactly with part you need and I will send you link

@frogtechtips 6 жыл бұрын

savage gamer yes you can but you will still have this error on screen

@frogtechtips 6 жыл бұрын

savage gamer of your screen is black you have probably problem with signal cable as well For more diagnosis tell me what's happening to your drone

@terrencel245 4 жыл бұрын

Is their a fan inside the gimbal camera

@aaronrodrigues Ай бұрын

thank youuu so much! A repair shop was about to charge me 600 dollars to get it fixed and I got it fixed for like 4 dollars, thanks again

@frogtechtips Ай бұрын

You welcome I hope you click subscribe as thanks you can use super thanks button or donation button plus I hope you will recommend my Chanel to your friends:-) have a nice day

@christianroessler4988 6 жыл бұрын

Thank you for the instructive step by step on Gimbal repair. I have followed this fix but I don't think I need to replace the cord I hope. The drone crashed when connection between phone and drone dropped off only a 10 meters apart. After 20 seconds the drone wanted to go up to 20 meters but a tree stopped it and then it flew into a wall and slid down slowly as the propellers scratched all the way down to the ground. I bought new props and one of the rubber bands holding the gimbal to the bracket severed. I used a touch of super glue and its good as new. However the camera message was the same as yours but the wire looks perfect. So I know I am writing this now before it all goes back together but I think it will be good. If not well I just have to order the cable. Any way you did a great job explaining and I have given you a thumbs up and subscribed. Cheers. Christian.

@frogtechtips 6 жыл бұрын

Christian Roessler hi I have another two video for this instructions just have a look and some more explain as well check play list for all video play list name repair drone in one place if any more questions just ask

@iSpike 6 жыл бұрын

Thank you friend. This video is a big help to me mate. I will need to do this to my Mavic so Thanks again you are meking it easy for me. Cheers Spike Western Austrlia

@frogtechtips 6 жыл бұрын

iSpike you welcome and I happy for you

@rodman777 2 жыл бұрын

you are the man!! I was flying my mavic in sport mode a lot, and no surprise, gimbal developed a fault and was unable to auto-calibrate. As per your recommendation, i decided to replace gimbal cable first, to see if it helps, because cable was very cheap (£9 on ebay). And now gimbal calibrates ok and i can fly again!! thanks!!!

@frogtechtips 2 жыл бұрын

You welcome and I hope you click subscribe as well

@T.S.Photohraphy-Cinematography 5 жыл бұрын

Youre the right man for the right job my bro, 👍👍👍 nice repair

@frogtechtips 5 жыл бұрын

thanks brother

@gmnepal Жыл бұрын

GOOD. Thank You for your help.

@frogtechtips Жыл бұрын

You welcome

@carolsane9208 6 жыл бұрын

AWESOME tips as always. thank you

@frogtechtips 6 жыл бұрын

thanks so much

@FrancePhil44 2 жыл бұрын

Thank you very much for your help. Thanks to you I could install the new ribbon.

@frogtechtips 2 жыл бұрын

You welcome

@Chefs-kitchen 6 жыл бұрын

I will run this whole playlist of 19 videos all night . I have an all food playlist that is full of great cooking ideas.

@frogtechtips 6 жыл бұрын

thank so much for this but I can`t do that for you :-( but i will watch some of your video

@evanescenceakii 6 жыл бұрын

Staying active. good job friend :)

@frogtechtips 6 жыл бұрын

Evanescenceakii he I will try :-)

5 жыл бұрын

Hey! i had the same gimbal problem but not certain of the root cause. I tried your replacement, and it works !!! thanks a lot !

@frogtechtips 5 жыл бұрын

hi nice to hear I help you and I hope you don't forget click like and subscribe to my channel. if you like qive me big thanks click on donation button for supporting my channel

@h.o1919 8 ай бұрын

Hi so what part was replaced the flex cable?

@ShineBrightStudioPhotography 6 жыл бұрын

Hey thanks for the support

@frogtechtips 6 жыл бұрын

Shine Bright Studio Photography you welcome

@CamaroTime 6 жыл бұрын

Very nice. I have got to get me a drone one of these days! Watched in full

@frogtechtips 6 жыл бұрын

Camaro Time if your budget is good buy mavic air man

@chantelavie 5 жыл бұрын

Thank you so much for the video. The gimbal of my mavic showed an error: gimbal motor overload. I replaced the flux cable and now the gimbal functions normally.

@frogtechtips 5 жыл бұрын

you welcome and thanks for your support :-)

@MidyJokerz 3 жыл бұрын

Thanks bro.. it's Works,,,👍👍👍

@frogtechtips 3 жыл бұрын

You welcome

@ONIK. 6 жыл бұрын

oho, Instructive video.

@frogtechtips 6 жыл бұрын

ONIK ye and I have more like this on my channel please have a look

@dramis2191 6 жыл бұрын

+1 Like nice clip!! Continu

@frogtechtips 6 жыл бұрын

Thanks so much

@mtrunk8570 6 жыл бұрын

Checking in Friend

@frogtechtips 6 жыл бұрын

Thanks so much I have more drone information on my channel and any question just ask

@gamingdude7668 6 жыл бұрын

#IAmACreator and left a like. good video my friend. This is seventy from one fifty

@frogtechtips 6 жыл бұрын

Gaming dude thanks so much

@americaru9368 6 жыл бұрын

WELL DONE👍))) GRET 👍))) BIG LIKE FROM NEW FRIENDS👍)))

@frogtechtips 6 жыл бұрын

America Ru thanks so much

@photozis 2 ай бұрын

It works thanks you 😊😊

@frogtechtips 2 ай бұрын

You welcome and I hope you are click subscribe as well

@gurjeetsingh191095 6 жыл бұрын

Thanks drone fixed

@frogtechtips 6 жыл бұрын

harmel Singh you welcome and I hope you will stay tune on my channel

@GolfTesla 3 жыл бұрын

that is a nice detailed instruction. However I am a bit afraid opening the "baby" up.... I came across this video as I occasionally (note: not always) get heavy gimbal shake (sometimes with, sometimes without an "excessive vibration" warning) and that is absolutely useless for films for my Golf&Tesla channel (I use the drone mainly for my golf course reviews, views of Tesla superchargers from above, and occasional landscape footage). And I don't want to take the drone and camera/gimbal apart... - but thanks anyway. Your video is well made.

@frogtechtips 3 жыл бұрын

Thanks so much and if you will follow all steps you will by successful IAM sure

@maximusmiles8435 5 жыл бұрын

Does it always need a new flex cable? Wouldn't you first check to be sure all connections are seated? Or is it more often than not a bad flex cable?

@frogtechtips 5 жыл бұрын

From my experience is for 95% problem with the ribbon cable

@alexward1230 4 жыл бұрын

Should be titled "11 minutes of mumbling" 😆 great video but please speak up!

@frogtechtips 4 жыл бұрын

Thanks so much I have 3 more videos about this problem just have a look

@reysan7606 5 жыл бұрын

Hi frog tech i have a 3 weeks old mavic pro and doing the same error as yours gimbal overload and motor overl load and gimbal doing erratic movement do you think this is a cable problem? i bought the parts now and tools might change it tonight but the deone is still under warranty, the thing is im book for holiday this weekend and cant wait for three weeks for the repair of dji support

@frogtechtips 5 жыл бұрын

Hi do you have any crash or when you transport your mavic do you use gimbal protect that white staff if not you can have cable damage

@reysan7606 5 жыл бұрын

Frog - Tech - Tips hi frogtech yes ive used the gimbal protector always ive just use it 5x now its almost new i nevwr crash it or any impact on landind

@jreverie7018 4 жыл бұрын

Hi frog tech tips :) I was just wondering, how did your camera behave before doing this fix? Currently, mine looks forward, then very suddenly folds all the way in so the camera lens is facing fully downwards. sometimes it goes back to looking forwards, but then within a second it starts to look down again or towards the back plastic of the drone. I'm happy to be brave and try this awesome fix you've showed in two videos I've clicked on - but yeah, not sure if my drone has the same issue. The camera just shakes like crazy and barely points in the right direction. I have writing come up "Gimbal motor load too large. Please check if the gimbal clamp has been removed. No clamp has been removed, everything visually looks fine. Thank you thank you thank you in advance if you're able to help! Greetings from New Zealand!

@frogtechtips 4 жыл бұрын

Hi Jared you write absolutely what usually camera do when is ribbon cable foulty and this damage can happen just over time.i will definitely recommend you replace Flex cable I have more videos about this problem on my channel as well with some more explain on some videos.just have a look or any more questions just ask. I hope you click on subscribe button as well

@jreverie7018 4 жыл бұрын

Frog - Tech - Tips is the flex cable a different cable to the ribbon cable? Thank you so much for the reply you’re a life saver! I’ve subscribed too :) very handy videos, I appreciate it very much!

@frogtechtips 6 жыл бұрын

Please Check description where you can find LINK for This Flex you will need buy to repair your problem

@HealthyVeganLiving 3 жыл бұрын

Hey frog good to have skills LIKE👍 632 Gary

@frogtechtips 3 жыл бұрын

Yop thanks

@Vibelens 6 жыл бұрын

done subs

@frogtechtips 6 жыл бұрын

+Vibelens thanks so much and welcome on my channel

@giladwasheretravel3553 5 жыл бұрын

That is absolutely inane. What am I? An engineer??

@frogtechtips 5 жыл бұрын

It's not hard to do

@discoverdifferent2994 4 жыл бұрын

It’s actually not really hard to do . I don’t know anything about drone mechanics and stuff

@jamesbunn4885 2 жыл бұрын

Hi my camera worcs.. In terms of focus but lost movement... I've seen replacement on wish very cheap.. Like 30 UK pounds.. Or almost 500uk pounds from dji.. What you think..??

@frogtechtips 2 жыл бұрын

Hi ye that's part should be ok I always use parts from there

@SistersCloset1 6 жыл бұрын

hi thanks for this video i crashed my mavic in trees while flying backwards :P and i have a broken left rear arm and gimbal doesnt move at all on start up. Im getting "1- Aircraft Motor Overload. Check whether gimbal clamp is removed. 2-Gimbal is restarting.Check that the gimbal rotates smoothly if restart fails again." error messages However my gimbal doesnt seem to have any apparent visual damage. what do you suggest? Im based in Germany

@frogtechtips 6 жыл бұрын

Hi gimbal can have damage and don`t need to by visible ye will need take parts down to get proper check arm replace is easy but you will need solder some cable video about that problem will come soon on my channel Iam from UK but any help you will need just ask and don`t forgot subscribe

@joyfullivingwithkd 6 жыл бұрын

#iamacreator supporting you.

@frogtechtips 6 жыл бұрын

Kimberly Dixon thanks

@meone310 2 жыл бұрын

Pro n platinum pro have same cable or different? I have got problem with platinum pro and only I only can find cable for pro. Thanks

@frogtechtips 2 жыл бұрын

is the same don't worry

@KikkawaRyu 6 жыл бұрын

Replaced the cable on mine yesterday still same gimble issue also now getting front and downward sensor issues. Dji won't do anything as its more than 12 months old plus has water damage due to a crash. Would replacing the whole gimble solve the issue rather than just the cable?

@frogtechtips 6 жыл бұрын

Kikkawa Ryu hi ye there can bi motor problem as you write your is liquid as well do you still have video signal from camera if yes you can try just motor part with is much cheaper that complete gimbal Plus are you sure you done all correct as even small damage can bring motor overload problem back How bad is your liquid damage and be sure you not make damege on vison camera but sometimes need all recalibrate after new gimbal first try solve gimbal problem You can send me picture on mail if you need more help or if you are from UK you can send to me for repair

@KikkawaRyu 6 жыл бұрын

Frog - Tech - Tips I can still see everything it all focuses just fine but will go floppy from time to time when recording, only recently happened after driving to Scotland from near London. Also had a software update which could do more checks but no clue. I'll give motor replacement a go if not I'll try and claim on insurance

@frogtechtips 6 жыл бұрын

Kikkawa Ryu ye try replace motor check description for part you will need and as I see you are from UK if your insurance can't help you let me know send me email or contact me on FB and I will send you all information where to send for repair good luck and let me know

@KikkawaRyu 6 жыл бұрын

Frog - Tech - Tips I'm hoping barclays can sort it out I'll give them a call and put a claim in about crash etc rather wouldn't wanna sink hundreds more into this than I have to Thank you for replying I'll try insurance route first if not I'll shoot you a message

@frogtechtips 6 жыл бұрын

Kikkawa Ryu no problem and don't forget subscribe to my channel :-)

@celoy09 6 жыл бұрын

My mavic pro got crash and have the “aircraft motor overload. Check whether gimbal clamp is removed” error message in the dji go 4 apps. Tried many times to calibrate the camera gumbal, but do not work. Is there possible of flex damage? Image and video still appear and can still record.

@frogtechtips 6 жыл бұрын

Marcel Evangelista hi ye I think there is flex damege flex is not expensive and is always worth to try I see even undamaged flex or is looks like undamaged make this problem

@Zavalik 6 жыл бұрын

Mine works fine when turning it on sideway...

@tituslane4929 3 жыл бұрын

Is this the same process for mavic pro 2? Thanks

@frogtechtips 3 жыл бұрын

Hi probably not huge difference but as I not see Mavic 2 can't confirm that for 100%

@ionutdragomir6070 3 жыл бұрын

Great video. In my case the gimbal doesn't move at all but i do have image transmission. Do you know where can be the problem? Just had my drone stuck in a 9m tall tree and rained on the drone for 2 days. Dried for one evening then next day I've noticed that the gimbal stopped moving. Any advice much appreciated. Thanks

@frogtechtips 3 жыл бұрын

Hi even small damage can be problems as this gimbal is so sensitive but first at all open you drone and check for any water damage

@ionutdragomir6070 3 жыл бұрын

@@frogtechtips hey. Opened it and fixed much appreciated there are so many videos on KZfaq . Thanks

@frogtechtips 3 жыл бұрын

@@ionutdragomir6070 you welcome I hope you subscribe and will like my others content as well

@ionutdragomir6070 3 жыл бұрын

@@frogtechtips absolutely

@frogtechtips 3 жыл бұрын

@@ionutdragomir6070 thanks so much my new friend

@pteepan2708 5 жыл бұрын

Could you link to a 256gb micro sd card, I think the LEXARs seem to be the fastest????

@frogtechtips 5 жыл бұрын

try check this one and if you like different one let me know rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F273629313516

@frogtechtips 5 жыл бұрын

or check this one looks ok as well rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382682071112

@lordsonic4567 5 ай бұрын

Asmome video. Do you thinkl this solve problme on Mavic Air?

@frogtechtips 5 ай бұрын

If there is a flex cable I will definitely try

@ashiquezygx 6 жыл бұрын

thanx for the help i fixed it back but i find my gimble to get stucked in certain angle and when i try to tilt it, it jerks and stops . can you help me why does this happen . is there any other problem in the gimble .it happens only in two positions rest of the movement is fine and now later that day i find the video is not properly stabilised when there is a quick movement . plz help me . i changed the ribbon and the vibration plate .

@frogtechtips 6 жыл бұрын

+ashique zygx hi can you explain what happened with your mavic do you have any crash, is there any visible damage on gimbal did you try gimbal calibration etc as maybe your gimbal motor is faulty as well good point is you can buy motor as well just check description for link and vibra plate rumble is ok Like I set I need to know more and full story

@ashiquezygx 6 жыл бұрын

i cant find any visible damaged . when i power it on it moves up and down and all the movement it does it doesnt come into position , and in the caliberation it completes 51 % and it stops showin caliberation not successful

@ashiquezygx 6 жыл бұрын

and it moves smoothly except in two position . i feel something is blocking the movement . and i have no idea about the bearing and how it works so can i open it without any mistake

@frogtechtips 6 жыл бұрын

+ashique zygx on that's sound for me your motor is foulty as well bed news is you will need new motor as is not repair posibility so far I know I tried that with no luck at all and as you can buy new motor about 40 pound now is no reason spend more time with find how to repair just buy new motor and I hope that will help you please check description for second link

@maTJoe007 3 жыл бұрын

What exactly you done sir? Just unplug and plug again cable? Not replaced any cable or any parts ya? Mine currently overload too

@frogtechtips 3 жыл бұрын

Hi no I replacing flex cable

@maTJoe007 3 жыл бұрын

@@frogtechtips nice video...

@frogtechtips 3 жыл бұрын

@@maTJoe007 thanks

@bsantos5680 4 жыл бұрын

Where do you get the parts at? May you post the link?

@frogtechtips 4 жыл бұрын

all link should be in description if not let me know with one you looking for and i will give you link or just have a look on here www.amazon.co.uk/shop/frog-tech-tips

@oczkowski8 6 жыл бұрын

Are you located in U.S? If I just send you my final can you replace and test mine????

@frogtechtips 6 жыл бұрын

oczkowski8 Hi sorry I am from UK but Iam sure there is someone is US do that or just try your self is not hard and if you will have any questions just ask

@JoseMendoza-xm3ys 3 жыл бұрын

Hi I managed to replace the ribbon cable and the drone camera feed is live and still registering on the App. but the gimbal still has the same issue. Any other troubleshooting recommendation?

@frogtechtips 3 жыл бұрын

Hi are you sure you don't make any damge when you fit a new felex as even very small damage even invisible is big problem

@frankjay6533 6 жыл бұрын

Need help, I get gimbal not installed in DJI go 4 app after crashed....I have DJI Spark

@frogtechtips 6 жыл бұрын

Frank Jay hi I never repair spark as no one have problem but I will bet there is gimbal problem try open and check for any visible damage and if you see any damage just replace that part if not try do that with some logic or if you are from UK contact me on email I will try help you

@pteepan2708 5 жыл бұрын

thanks for USA links, also next time if you can make a connection with a usa repair place, WHY NOT more links to help you generate $ for your helpful video, again Thanks you for this video

@frogtechtips 5 жыл бұрын

hi sorry but not sure who repair in US but ye any link you will need let me know I will send you one as anything you buy over my link I make some small $ and thanks for your support

@OMARERRE90 Жыл бұрын

hi, in my mavic pro besides the overload warning... it constantly moves when it starts, and it makes an interference noise... those problems are fixed with changing the flex?

@frogtechtips Жыл бұрын

Hi probably yes Flex cable can help

@OMARERRE90 Жыл бұрын

@@frogtechtips thank you very much for your answer, im gonna try, greetings from argentina!

@frogtechtips Жыл бұрын

@@OMARERRE90 you welcome and I will wait any questions just ask

@OMARERRE90 Жыл бұрын

@@frogtechtips i have one more... sorry! i noticed the gimbal gets too hot also after a while, i saw some answers in other places that may be the motor that must be changed... you say i still try with changing the flex and if the problems remains, i send it to the support?

@frogtechtips Жыл бұрын

@@OMARERRE90 hi if you getting hot that's can be because telex but if you want save time you can replace motor as well is not that much more money look on description I hope link inside still working if not let me know I will find some for you

@willpierce2171 6 жыл бұрын

I recently crashed my drone in to a tree. no visible damage apart from the tiny little l bracket attached to the gimbal vibration board has snapped. is this easily replaced? also when I turn the mavic on there is no movement at all with the gimbal and the error gimbal obstruction keeps popping up. I can move the gimbal freely with my fingers. is this likely to be a problem with the ribbon cable?or something more sinister? thanks

@frogtechtips 6 жыл бұрын

Hi I think you will need new ribbon cable for 99%

@willpierce2171 6 жыл бұрын

thanks very much. this video will be very helpful for me then!

@frogtechtips 6 жыл бұрын

Will Pierce you welcome

@krsavchik9654 3 ай бұрын

6:12 if this part of the suspension is where the suspension motor is, if you press on it with your hand, it seems to move a little, what could it be?

@frogtechtips 3 ай бұрын

Hi if i good remember yes is little moving

@krsavchik9654 3 ай бұрын

@@frogtechtips The gimbal works for me, but it’s not convenient to put pressure on the camera every time so that the gimbal motor doesn’t shake

@LoneWolf-ts7um 3 жыл бұрын

I just replaced my gimbal ribbon cable. Both motors are working but gimbal calibration doesn't take place. What is the issue ??

@frogtechtips 3 жыл бұрын

I give you answer on my other videos already

@FierceIndian07 6 жыл бұрын

u got 1 for the spark?

@frogtechtips 6 жыл бұрын

FierceIndian07 hi I don't have one for spark as in 1y I repair drone nobody ask for repair spark I believe they are so good as don't need repair :-) and if you are from UK send me email I can try help you

@Freedom9X 4 жыл бұрын

The message GIMBAL Motor OVERLOAD comes when I start the Drone. There it wanst to kalibrate. Then you can here that the gimble is moving in all directions and hitting something. Is the replace of the cable also going to fix this problem? Becuase the Camera still works fine.

@frogtechtips 4 жыл бұрын

hi I think for 99% you will fix this problem with new ribbon cable

@sdoberma 4 жыл бұрын

Where do I get the ribbon cable?

@frogtechtips 4 жыл бұрын

@@sdoberma look on description there is some link

@sdoberma 4 жыл бұрын

@@frogtechtips gracias

@erniemiranda5711 2 жыл бұрын

What did you replaced only the flex cable

@frogtechtips 2 жыл бұрын

Hi yes usually is flex problems

@AdamVW1958 5 жыл бұрын

Ummmmmm, I don't think I will be doing this any time soon......or ever.

@frogtechtips 5 жыл бұрын

trust me is more easy than looks like

@mariochesser7849 Жыл бұрын

Why the video insert. It's confusing which video we're supposed to be paying attention to

@frogtechtips Жыл бұрын

Not sure what you mean but I have 2 more video in my channel have a look and maybe you will like that other ones

@VlogsIlove-kt3zj 3 ай бұрын

Same problem rises, did u change anything?

@frogtechtips 3 ай бұрын

You need replacing flex and if that doesn't help replace full gimbal is not expensive this day

@antonioantonio5705 3 жыл бұрын

Amigo troquei o cabo flat e ao testar o gimbal não tá fazendo o check inicial, ou seja, nem se mexe e não dar imagem nenhuma. O que pode ser?

@frogtechtips 3 жыл бұрын

Sorry not understand

@BrianEHurst 6 жыл бұрын

I had a minor crash and now getting the “overload error” message. I’m still getting great video but the gimbal/camera keeps moving up and down as if starting up. Recalibration doesn’t work, stops at 5%. Any idea what the issue could be? Thank you in advance!

@frogtechtips 6 жыл бұрын

Brian E. Hurst looks like flex problem this is common problem after crash

@BrianEHurst 6 жыл бұрын

So how do I fix a flex problem? Do you have a video for it? BTW ... your videos are extremely helpful and thorough! Thank you for your time and efforts!!!

@frogtechtips 6 жыл бұрын

Brian E. Hurst ye man this video is about that and I have another two video for the same problem just have a look on my channel you will find them

@marknguyen3351 6 жыл бұрын

Hello, my gimbal is point down after crash. Do you think if I replace flexible cable then it will fix the problem? Thanks.

@frogtechtips 6 жыл бұрын

Mark Nguyen hi I need to know more did your gimbal move or just stay on down position do you have any error in app ? Do you still have video signal? How bad is been crash is there any more damage And ye probably is flex problem but check all 3 motor if not moving smooth you will buy complete motor ye let me know and good luck

@yelenaisaak8441 3 жыл бұрын

Hi, I have the mavic pro and it shows “gimbal motor load too large”. Is this the same issue as the “gimbal overload”? And if so, would this be the right video to follow out the other video you posted on fixing the mavic pro?

@frogtechtips 3 жыл бұрын

Hi not sure but can by problem with flex as well

@pauleysisland4959 6 жыл бұрын

nice video what was the actual problem with the gimbal

@frogtechtips 6 жыл бұрын

Captain Jay Pauley problem been with ribbon cable as customers never use gimbal holder when he transport his mavic and over time cable get damage this is so common problem

@mxkawi58 6 жыл бұрын

Dude this is not an easy fix.. where do you even get those tools?

@frogtechtips 6 жыл бұрын

+mxkawi58 hi link for parts you will you can find in description if you need tools for open let me know I can send you link

@rakeshgatla8094 2 жыл бұрын

My drone is Mavic air2 problem gimbal overloading so please what I have to do ....

@frogtechtips 2 жыл бұрын

Hi I never fix Mavic air 2 but I think will be similar problems try replacing flex

@brandonthevisionary485 4 жыл бұрын

What kind of screw driver did you used in order for you to take the gimbal apart?

@frogtechtips 4 жыл бұрын

I have screw set like one in description try have a look and click on link

@brandonthevisionary485 4 жыл бұрын

Frog - Tech - Tips I don’t see it

@frogtechtips 4 жыл бұрын

@@brandonthevisionary485 hi sorry I checked and I removed last time I change description here is link for you this is simular one u use rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F163760042554

@brandonthevisionary485 4 жыл бұрын

Frog - Tech - Tips thank you

@frogtechtips 4 жыл бұрын

@@brandonthevisionary485 you welcome

@drudownhubsanflyer8380 9 ай бұрын

How much would you charge to do this?

@frogtechtips 9 ай бұрын

Hi if you are from UK contact Spark angel in Kettering

@shotfocus7283 3 жыл бұрын

Could I send you mine to fix I’m from London ?

@frogtechtips 3 жыл бұрын

Hi iam nové back to my country iam not in UK anymore you can still send card to my but you will need send to Slovakia

@osamaali95 6 жыл бұрын

The gimbal camera on my mavic do nothing .. no movement and no gimbal dance when i power it on ... it crashed from 3 feet height and shows the same error of motor overloaded ... the video transmission is fine i can record the video but cant move gimble up and down and no movement in the start .. will i too have to change ths gimble flex cable ribbon? Thankyou

@frogtechtips 6 жыл бұрын

+Osama Ali hi there is possible damaged power as well but I will try open gimbal for inspection and check ribbon cable visually if you find any damage just replace that cable as is cheap always best options to try as first point if you can't find any visible damage you will need try top border or gimbal motor but as you still have signal I will bet you ribbon cable is cut

@osamaali95 6 жыл бұрын

Thankyou for the reply ... i have inspected it deeply and couldn't find any physical damage to the gimbal ... all i know is that it does not dance in the start when i power up the drone and it gives the motor overloaded error .. i will unscrew it tomorrow and wil let you know ... going to order the ribbon online tomorrow...

@frogtechtips 6 жыл бұрын

+Osama Ali yop as you can see on this video there is no damage at all visible by eye but replacement help and there been no problem anymore and if you check my second video for gimbal repair witch is more detailed please have a look you will see damage is between vibra plate and holder quite well hide yop open and check that gimbal and remember even microscopic damage on ribbon cable give you motor overload and as your looks like dead I think will be similar cut like I have on that second video I hope all my video will help you

@osamaali95 6 жыл бұрын

Sorry where is the link to your second in-detailed video?

@frogtechtips 6 жыл бұрын

+Osama Ali ok easy way here is link :-) kzfaq.info/get/bejne/o7aalKpimryrnXk.html

@ethanplank5192 2 жыл бұрын

What is the best way to get the glue out

@frogtechtips 2 жыл бұрын

Just gently with something Sharp

@ethanplank5192 2 жыл бұрын

Thanks

@frogtechtips 2 жыл бұрын

@@ethanplank5192 you welcome

@thuanvan111 2 жыл бұрын

What address do I want to send it to for repair?

@frogtechtips 2 жыл бұрын

If you want this information please send me email

@SEPK09 4 жыл бұрын

Or reset drone or imu.!

@frogtechtips 4 жыл бұрын

That will not fix gimbal overloaded error

@watermeloncaviar5959 6 жыл бұрын

this is why you get DJI Care. I would totally mess this up and be pissed

@frogtechtips 6 жыл бұрын

Watermelon Caviar yes you have that option as well

@watchmanyt9548 3 жыл бұрын

Can i buy spare parts?

@frogtechtips 3 жыл бұрын

Of course you can some links is on description and if not the one you looking for let me know with part you wand and I will find for you and send some links

@Trex531 6 жыл бұрын

Why two screens? It makes the video harder to watch. Also the music sounds louder than your voice at the end. Good effort though.

@frogtechtips 6 жыл бұрын

Trex531 hi man this is one of the 3 video with this problem on my channel if you Don like this one check the other one and two scree to get better view for what I do :-) check my channel full please to find video you like for this problem and thanks for watching any problem just let me know

@r.g9044 6 жыл бұрын

could you see whats wrong with mine? /watch?v=V-AV4Qlwvaw No crash, only used it 4-5 times. It seems like the gimbal gets stuck on the left side.

@frogtechtips 6 жыл бұрын

R.G 90 hi I will check this later and give you answer

@frogtechtips 6 жыл бұрын

hi I can`t open link :-(

@r.g9044 6 жыл бұрын

hmm weird it works for me. Can you click on my name and look at my latest video. *I tried to recalibrate the gimbal but it get stucks on 5% and says that i should keep the aircraft stationary. Also when it calibrates it seem to hit the wall sometimes and maybe thats where the problem is.

@frogtechtips 6 жыл бұрын

R.G 90 check all 4 small rumble and vibrant plate I will check that video later

@bharathrajvv 4 жыл бұрын

I had same problem, I replaced flux cable but again giving gimbal overload error.. What could be the problem.. ?

@frogtechtips 4 жыл бұрын

hi did you get straight after replace or after some time as if been straight after maybe you damage flex in fitting process or can by faulty top pcb as well

@bharathrajvv 4 жыл бұрын

@@frogtechtips its straight after fix.. I brought it from bangood.com, I carefully fixed it.. No physical damage seen

@frogtechtips 4 жыл бұрын

this cable is so soft even invisible damage can make gimbal overload or new fex can be faulty I see that as well I will try check all conection cable or motor as well and maybe again reconnect all

@bharathrajvv 4 жыл бұрын

I will check again by re connecting.or try another cable. Thank u for ur reply..

@frogtechtips 4 жыл бұрын

@@bharathrajvv you welcome and let me know or buy complete part motor maybe will be good choice for you look on description for some link

@cinetheus 5 жыл бұрын

Mavic Pro is the worst shit I bought in my entire life, expensive and useless.

@frogtechtips 5 жыл бұрын

he first time I hear this so many people like it but everyone have different decision

@bhaskarrock5914 2 жыл бұрын

Hi bro flexible cable kavali

@frogtechtips 2 жыл бұрын

Not sure what you mean kavali

@bhaskarrock5914 2 жыл бұрын

Mavic pro motor overload

@frogtechtips 2 жыл бұрын

@@bhaskarrock5914 if you have that problems replace Flex cable and should be fine

@lvmpasi 5 жыл бұрын

I didnt even f***ing crash and im getting this error.. Also im not an engineer

@frogtechtips 5 жыл бұрын

ye I seen this problem even when you are not crash do you still use that plastic gimbal holder when you move

@lvmpasi 5 жыл бұрын

@@frogtechtips Everywhere I go! Came off a flight the other day (which my drone was packed in) and have had the issue since. Thinking the bag took a hard hit somewhere.

@frogtechtips 5 жыл бұрын

ye my friend that's can be reason as flex inside this gimbal is so sensitive

@phonesmartlock9565 5 жыл бұрын

Everybody has this problem with dji what the hell japan poor workmanship

@frogtechtips 5 жыл бұрын

ye this is common problem on mavic pro long time

@jamesneagle1330 5 жыл бұрын

*China

@frogtechtips 4 жыл бұрын

probably true my friend

@g.e.romero4121 4 жыл бұрын

I feel stupid after having watched this 😪

@frogtechtips 4 жыл бұрын

Why my fried

@g.e.romero4121 4 жыл бұрын

Because that you do in the video is way too complicated for just anyone to do it.

@frogtechtips 4 жыл бұрын

@@g.e.romero4121 no is not if you take a time iam sure you can do it looks more complicated than it is

@dannymre4836 4 жыл бұрын

mate this repair video was simple, but I downvoted this video because of that ridiculous small screen you have showing a completely different part of the repair making it so confusing to follow! Why on earth did you have that

@frogtechtips 4 жыл бұрын

Hi bro I have 3 different videos about this problem if you don't like this one have a look on another one I have on my channel

@jenixtravelvlog 10 ай бұрын

I am in a middle of a trip and obviously this video does not help. The title is wrong, you don't explain why this happened, you just change a part

@frogtechtips 10 ай бұрын

Why this happens is easy usually because you don't use gimbal support part when you Cary your dron in bag and Also is really common foult there is no reason to explain why is happening in this video is how to fix This problem and yes replacing this flex will help

@jenixtravelvlog 10 ай бұрын

@@frogtechtips I always put that part cover. Thanks for the explain

@frogtechtips 10 ай бұрын

You welcome