How To Fix Heavily Corroded Wheels - Silver Metallic Powder Tips

Рет қаралды 158,416

3 жыл бұрын

In this video we explain how we go about fixing corroded wheels. These wheels are off a Mid 2000's Ford vehicle and are a machined wheel. These wheels are typical for having bad corrossion as they just clear coat them from the factory. We will also cover tips on gun settings, spray technique and how we do them!
Also in this video we try out Rim Strip from Express Chem, we are only stripping clear but it did give us a good idea as to how there product matches up against B17, so far so good and at a much lower price. We hope to test it a bit more on more difficult coatings soon. Check them out at this link: powderstrip.com (please note we are not being paid for this review, but did receive chemical to sample-our review is not influenced by manufacturer at all)
Follow us!
/ rightnowpowder
/ rnpcmetalworks
www.rightnowpowdercoating.com/
/ right_now_powder
Would you like to support our channel?
Products we use from Amazon:
www.amazon.com/shop/rightnowp...
as an Amazon associate I benefit from your purchases, this does not change your price.
Show support for us (buy merchandise, products, and learn) at:
www.powdercoatingforbeginners...
Become a member for discounts at our learning site here:
/ rightnowpowdercoating
Check us out on Facebook:
/ rightnowpowder
/ rnpcmetalworks
We Love tips: paypal.me/rimright
Want to grow your channel, we recommend: www.tubebuddy.com/rimright
powderstrip.com/
Ebay List
Paint Booth:
ebay.us/4hBIw3
EZ50 Powder coating gun kit:
ebay.us/3eQ0lf
Hyper Smooth 03 LED Powder Coating Gun (HS-03LED): ebay.us/P8xXF2
Kool Koat HD Powder Coating Gun (KKHD)
ebay.us/XxlSTO

Пікірлер: 177

@HalfAssHomestead 2 жыл бұрын

Real curious why you acid dipped to remove the clear coat. Wouldn't the sand blasting serve the same purpose?

@probablyreddex 6 ай бұрын

Yeah I’m pretty sure it would I think he was trying to plug a product considering his hired hand didn’t know how to properly rinse them

@AdrianMcDaid 3 ай бұрын

Needs to be dipped. Then sand blasted

@realdave3240 19 күн бұрын

Blasting isn't for stripping, it's to create the proper surface for powder adhesion. Stripper is for cleaning. Blaster would clean but take too long and risks digging ditches in the wheel.

@TLRSILVER 3 жыл бұрын

Best part is the guy getting told where to rinse the wheels off at and his responce was to exhale loudly and say so much work. Nah solid video definitely an amazing business you have going.

@RightNowPowderCoating 3 жыл бұрын

Yeah, they dont like it when I tell them what to do haha. He did ask me too if he needed to sign a doc to not claim any monetization from the video. lol.

@dirtyaznstyle4156 Жыл бұрын

Lol gotta clean out the rinse tank afterward that’s why

@richeyrich2203 Жыл бұрын

@@RightNowPowderCoatingthat should be in the employment documents if you are televising your business

@70ixlr86 Ай бұрын

Have the worker spotlessly clean the area. They will never rinse out of that tank again.

@67mlb67 3 жыл бұрын

That’s amazing how well those came out.

@DeepStageCoatings 3 жыл бұрын

Thanks for the info. Good to see vids coming up on your channel again.

@campnut6076 2 жыл бұрын

Great video, I've never done powder coat but it is amazing how it works. Thank you for sharing.

@gerardlunow567 Жыл бұрын

Love the Bud light shot!! Wheels look beautiful.

@JonDoe-bg8ht 3 жыл бұрын

You have an awesome set up! I dream about having a shop like that, all the professional grade equipment you could ever need within a few steps from each other! Also really appreciate all the tips on gun distance and settings.

@RightNowPowderCoating 3 жыл бұрын

it only gets better...i stared with the eastwood gun and a home oven... No I sell million dollar systems and they make me feel tiny.

@goldfish02rex Жыл бұрын

Very nice. About to do my first job. You’ve been So helpful, thank you.

@outdoorzone 3 жыл бұрын

They look great man! Thx for tips!! I’m customer will be pleased!

@dale9896 3 жыл бұрын

Great job mate, they really came up great considering the way they looked. All I can say is, haters are going to hate! It’s your channel role with or without music, keep on keeping it real 🤙 I enjoy it all. Thanks 🇦🇺

@RightNowPowderCoating 3 жыл бұрын

Thanks for the kinds words!

@gordonmckay914 Ай бұрын

Very good work. Wheels look awesome.

@robtankbuster5215 Жыл бұрын

Turned out great, those rims look just like my friends old ford ranger rims. Really like the silver finish.

@riceburner4747 Жыл бұрын

Great video. 1st time viewer. U seem very down to earth. I love watchn powder coating. Items always look so good. 👍

@RightNowPowderCoating Жыл бұрын

Powder coating is very addicting for sure. Thanks for stopping to say hi!

@andrewbodey5025 3 жыл бұрын

Look great. Im taking notes as I have the same Gema.

@justinturner4850 2 жыл бұрын

I appreciate you teaching people at all levels. I see a ton of tips for people at the pro level. But also I really appreciate you busting out the Eastwood gun for the diy level guys like me. I just started powder coating some parts of my motorcycle and will try some stuff for my car and my dads boat and I’m grateful for the videos you put out. There are a lot of 💩’y people with 💩’y comments but I’m glad you can ignore them. Aloha from Maui

@RightNowPowderCoating 2 жыл бұрын

I really dont mind the negative comments to be honest, there not putting out content....if they can do better have at it. I like helping others...not trying to put out professional content that is perfect.

@johnreynolds3265 9 ай бұрын

😊😊😊😊⁷😊

@reedsfab3828 3 жыл бұрын

Nice work.Thanks for the tips on the gun settings.

@RightNowPowderCoating 3 жыл бұрын

happy to help

@JacksonSubNScaleModelRailroad 2 ай бұрын

@@RightNowPowderCoating How much would I expect to pay for this kind of service?

@adamderocco1062 3 жыл бұрын

They do look great good job

@vr6caddy843 3 жыл бұрын

Nice job, great info

@j-dub3294 3 жыл бұрын

Those look really great. Keep up the great work!!!

@RightNowPowderCoating 3 жыл бұрын

Thanks!

@williamscott3444 Жыл бұрын

Thats a impressive job you guys did on those rims! From poop to perfect. Outstanding!

@josephsliger3308 Жыл бұрын

They look awesome

@glynecollymore5569 3 жыл бұрын

Awesome and your knowledge sharing is appreciated

@RightNowPowderCoating 3 жыл бұрын

thanks, I appreciate it!

@reinaldocaraballo6427 15 күн бұрын

Great job well done

@kylehartnagel3610 3 жыл бұрын

Very clear explanation and instructions as always. I would be interested in some tiger wet black in the near future if you stock that color. Thanks Dan!

@RightNowPowderCoating 3 жыл бұрын

We always have it, let me know!

@ernestspriggs5701 3 жыл бұрын

Great job

@sabz911 3 жыл бұрын

Great video. I always throw a high build primer on first when the wheel is hot to cover most of the corrosion and any imperfections that I might have missed in the blaster. Hitting it hot also helps to prevent dotting on the powder if you’ve not out gassed for long enough. Something which can often happen with heavily corroded wheels. Also easier to see any areas that might need a little extra primer as it flows out as soon as it hits the wheel. Primer is usually much cheaper to buy than the colour you’re powder coating so long term it can work out more cost effective to primer the whole wheel on a corroded wheel and then second coat the face and inside bowl with the colour. All depends on customers expectations I guess. In England our weather and the products used by the local car washes means we’re forever doing corroded wheels

@johncoppock3823 2 жыл бұрын

Great video and fantastic job on those wheels. Dumb question for heavy corrosion from salted roads: when are wheels best scrapped rather than attempting to re-finish? I've read lots of contradicting answers

@fordman7915 3 жыл бұрын

Another awesome job and video. I wish I had your knowledge, it would help out on my little jobs. My brain is like a steel trap, it's just rusted shut. Keep up the good work. Thanks for the videos.

@RightNowPowderCoating 3 жыл бұрын

thats probably my new favorite line.... my mind is like a steel trap just rusted shut! haha, happy to help.

@AdultsOnlyMagic 3 жыл бұрын

Is it weird we are creeping on you at 5am Dan?

@AdultsOnlyMagic 3 жыл бұрын

Ps.. it's Danielle ;)

@RightNowPowderCoating 3 жыл бұрын

@@AdultsOnlyMagic yes because I assume you didnt sleep yet.

@chrisbaxley8586 3 ай бұрын

@@RightNowPowderCoatinghey Dan I powder some atv rims gloss black but I didn’t like the way they came out so I stripped them do I need to sandblast them again?

@michaelwarren5154 Жыл бұрын

What does a job like that cost?

@bHappy777 2 ай бұрын

What kind of cabinet sand blaster you have please the brand. I appreciate your knowledge you know what you doing excellent prep and your gun set up to creat a perfect cloud.

@peterbraunerdegnbol2017 8 ай бұрын

Appreciations from Denmark! 😄🙋‍♂

@SuperDylon1 3 жыл бұрын

Hey love the videos what model of gema unit do you have looks like it sprays really well

@TheBoostnm3 3 жыл бұрын

What size is the strip tank? How many gallons does it take to cover 4 wheels? Is it just mild steel and if so what gauge? Was wanting to build one also.

@MikefromMOMichaelTurner227 7 ай бұрын

Love the video! Thanks for sharing. What kind and size of compressor do you run? I don’t think my 5hp duel stage would do it Lol. Keep up the great job 👍

@ForbiddTV Жыл бұрын

What do you do with bad pitting in the bead area? Do you fill them or grind them first?

@fabcoating5909 2 жыл бұрын

whats your actual cool down Temp ? i start the second coats at about 120-150 degrees, or would it be better at a much lower temp

@stroise256 8 ай бұрын

100% better. So nice

@dennywood3347 3 жыл бұрын

Just interested in your cure time for the second coat of clear

@jordanbhatti440 2 жыл бұрын

What size of blast cabinet do you guys use?

@gary-gilbert 2 жыл бұрын

How does the cost of this service compare to buying an after market rim?

@brycewilson3412 Жыл бұрын

What blast media do you use and what pressure

@JoshNTurboJosh 2 жыл бұрын

Great video! What kind of sandblasting tip are you using? I see you're not using a gun. I've been using a scat gun and it keeps clogging 😑 what you're using looks much more efficient! Would love to know more about your set up! Thank you in advance! I've been watching a lot of your videos! I'm using b17 as well, but I'm looking for an alternative. I just subscribed to your channel, your content is great!

@raybunn8895 6 ай бұрын

How do you stop the ali from corroding, do you phosphate dip the wheels?

@grumpysteelman 2 жыл бұрын

All the best for you, buddy. You do great work - just remember to thank your audience for their comments but don’t think for a moment that you’ll please the vocal minority by changing things like the music for them. It would be different if the music was 3x as loud as the rest of the video, but in reality it’s mostly unobtrusive, and that’s what you want in a topic for a wide audience. Comment storm for that guy at KZfaq…Al Gorithm.

@rovillien 3 жыл бұрын

where the F@$& was this guy when i wanted to start powder coating.... i gave up since no one had a clear explanation on this. great job man! i've watch like 5 videos in a row right now #Subbed!

@RightNowPowderCoating 3 жыл бұрын

Haha I appreciate it, thanks!

@AlexisMartinez-nl5py 2 жыл бұрын

what media did you use?

@nice_guy_3337 3 жыл бұрын

as always great video ! but a question reguarding the clear, noticed that its not looking wet and smooth, (looked like it had some peel to it, or maybe just the camera picking up the silver unsder it and showing it so its fools the eye, but what are your go on acrylic clear? ive tried it and im sold, the clear flows and lays so perfect every time! keep up the good work

@RightNowPowderCoating 3 жыл бұрын

we have not tried any acrylics, afraid of the silicon in them.....but I will be trying better clears in the future.

@lorrinwright4707 Жыл бұрын

Great information only thing I could recommend is explaining your tech talk as I’m now more informed on the process of powder coating from a visual step by step process. . F***k the haters !

@percussion44 10 ай бұрын

So the clear is also a powder coat? Not a PU clear like in autobody repainting?

@AnakinSkysquatter Жыл бұрын

Im buying a new set of wheels and am wondering.. Can powdercoating “hide” rim cracks? Could someone try to hide a crack with coating it? Thanks :)

@andrewspence7635 3 жыл бұрын

Try hot flocking a alloy primer on first , that'll hide the light corrosion, that's some gun , that clear coat went on very nicely .

@TheSvtcobra1998 Жыл бұрын

About how much would that cost to do all the rims like that 17”

@guillermojoseperez5700 10 ай бұрын

Hello .. Im trying to paint my wheels.. Actually they are Crome and very bad shape.. All shops say Is not possible, any suggestion how to get rid of the crome so I can paint them.. Thanks..

@JeLifeCoach 2 жыл бұрын

For someone at home and a DIY’er - is the only option lots of sanding to get a good finish? I notice you had that blasting booth and that was awesome! Would the steps be sand, wheel buff, polish, and then clear coat for someone at home?

@RightNowPowderCoating 2 жыл бұрын

no buff, just sand, clean, coat

@powerelectricalsafetysyste4056 3 жыл бұрын

How long do you bake them for ? What temp do you bake them for? If you lay them down vs hanging them would that effect the drying process when baking them ( damage the finish)

@RightNowPowderCoating 3 жыл бұрын

depends on long it takes to get to temp, we dont lay them down to prevent falling debris from hitting the face

@Viney012 3 жыл бұрын

All I would add is try using a high build primer on corroded wheels it will hide the pinholes and give you a super smooth base to lay colour on also I hot flock far quicker 👍

@RightNowPowderCoating 3 жыл бұрын

yup this can help, it really comes down to the customer and their budget in my world. some just want them better and some want them perfect.

@georgeesparza4630 3 жыл бұрын

After the sand blast do you re rinse the wheel or just blow off the sand before coat

@RightNowPowderCoating 2 жыл бұрын

We wash them and then dry, then coat

@DRW1972 3 жыл бұрын

Hi, when I coat metallic silver I find any dark spots show through. I started using primer to help this. What I find with the primer is he rims need to be very hot for primer to stick. Any help?

@RightNowPowderCoating 3 жыл бұрын

Dark spots as in not enough powder to cover the part? I have not had this issue personally. Primer is not a bad idea though.

@tomrohn8607 Жыл бұрын

Amazing

@mikes3593 8 ай бұрын

How much would something like that cost to get done?

@LRCII72 3 жыл бұрын

what heats you oven ? infrared heat to heat only the object or heat the whole box to set temperature?

@RightNowPowderCoating 3 жыл бұрын

what ever flamer thrower came on it, lol. its from columbia coatings

@CesarHermosilloSVT03 3 жыл бұрын

Hi, Im new to this, just bought my dream truck and the original owner powder coated the oem chrome wheels in black, those wheels look nice but I really love the chrome, is posible to remove the black powder coat and just apply a new powder coat in chrome? just like oem factory... What do you recommend? Thanks🙏🏻

@RightNowPowderCoating 3 жыл бұрын

nope, dont do that, chrome sucks and its not great to coat over, really bad if it has pitting or corrosion. Buy new wheels, way better and cheaper.

@erikzamora4265 3 жыл бұрын

You do awesome work! Where is your shop located (if I may ask)? Asking from CA.

@RightNowPowderCoating 3 жыл бұрын

We are in Iowa

@scottieconway5523 5 ай бұрын

where are you guys located?

@kennethluff9751 2 жыл бұрын

What's the top left button for.

@daviddelatorre9430 3 жыл бұрын

how big is the air compressor you guys run for the sandblast cabinet

@RightNowPowderCoating 3 жыл бұрын

We have a polar air 85cfm

@ajiiatputharajah9648 3 жыл бұрын

Hi, great video! How do you work around wheels that have heavy corrosion like the wheels in your video? Don't you deal with outgassing issues without using primer?

@chipispowdercoatingcharles8444 3 жыл бұрын

That would be the answer personally I prime all my wheels with outgas forgiving prime. We will sand corroded spots at that point therefore using it as a filler reprise if necessary color and clear

@birds.and.birdies 2 жыл бұрын

How much would something like this cost??

@GMPC 3 жыл бұрын

do you carry any of the tiger flip flop colors? Sunrise black or Tropic red?

@RightNowPowderCoating 3 жыл бұрын

Not at this time, we mainly carry basic colors, we get most of our small batch colors from prismatic powders at this time. If I had enough demand for a certain color I would be interested in ordering for many.

@GMPC 3 жыл бұрын

Just trying to find somebody that carries these to flip-flop colors. I’m interested in a couple pounds and have no problem paying their extremely high price for them. But I just can’t buy 5 pounds now and I’ll only use 2lb. I figured it was worth a shot. Thanks always for your great content

@Fives-gm2bv 3 жыл бұрын

Thumbs up, great info. Hard for me to believe it’s worth the amount of labor to restore these wheels. Looks like a many hours of labor and energy. How much did you make per wheel for all of the trouble? Was it worth it? Or was this demonstrating that you can bring a wheel back to life?

@rogerborg 2 жыл бұрын

Insightful comment. No, there's no point in putting this amount of professional time into wheels that you can pick up for less. Either bodge, or replace, this process is a labor of love.

@noahriedel801 2 жыл бұрын

What's the process for getting a nice finish with corroded steel. Primer ? Seems I need a filler but what ?

@RightNowPowderCoating 2 жыл бұрын

you can fill with primer, sand it down, fill again if needed, then to color.

@Sizzyyyy Жыл бұрын

If I just asked for a silver powder coat woukd my wheels turn out like this?

@BrokenSmokinSpokes 2 жыл бұрын

What media did you use to blast the wheels? Sorry if I missed it!

@RightNowPowderCoating 2 жыл бұрын

Coal slag

@BrokenSmokinSpokes 2 жыл бұрын

@@RightNowPowderCoating Thanks for the reply. I assume crushed glass shouldn't leave too agressive of a profile then on aluminum wheels? Thanks again!

@franherrera3754 2 жыл бұрын

How much is the cost of that

@stevejennings3450 3 жыл бұрын

Can you do some auto badging/how do you do it. (Emblems) older metal ones thanks,very good videos. Thanks

@artlabuae7303 3 жыл бұрын

10000 likes from Dubai

@MegaRickw 3 жыл бұрын

great video,but didn't see you fix anything,just did a normal powder job?

@RightNowPowderCoating 3 жыл бұрын

Thats the key, blast corrosion out and coat!

@johnpadovan6575 2 жыл бұрын

What does a job like this cost?

@jscoatings1207 3 жыл бұрын

Lexus wheels are usually pretty bad too. Turned out good!

@RightNowPowderCoating 3 жыл бұрын

them and toyota..same thing, really bad, horrible manufacturer

@sharonclark8306 4 ай бұрын

Do you have special hooks for rims

@RightNowPowderCoating 2 ай бұрын

Nope, we hang a swivel hook and then just a s hook in the valve stem area...no issues with thousands of wheels done that way.

@larryshipman248 Жыл бұрын

Looks really nice how much does it cost?

@krich5755 Жыл бұрын

Exactly what I was wondering.

@ireallyreallyreallylikethisimg Жыл бұрын

@@krich5755 wondering the same here..

@outdoorzone 3 жыл бұрын

Is chemical stripping about the only way to remove old powder coating? Sandblasting?

@RightNowPowderCoating 3 жыл бұрын

Not only but easiest

@SinnerSince1962 Жыл бұрын

What does a process like this cost per wheel?

@eddielandan3946 Жыл бұрын

Hi location of the place

@extremefabrication4x4offro80 3 жыл бұрын

Let me know when are you selling tiger powder really interested

@RightNowPowderCoating 3 жыл бұрын

email me with request.... dan@rightnowpowdercoating.com

@GVGR11B 2 жыл бұрын

How much does it generally cost to redo 4 rims?

@MSami-fe6uj Жыл бұрын

They charge $185 per wheel to $250 depending on the wheel, you can do this at home for $20 for all wheels

@GVGR11B Жыл бұрын

@@MSami-fe6uj I've got a rare set of aluminum 13" blade style rims from a Honda crx that have chips and chunks missing from the lip in the aluminum.

@ChevyAddictLLC 5 ай бұрын

How can I get in touch with you

@vesang4543 2 жыл бұрын

I can definitely do this at home ... after I built a pro shop

@NewsThatMatterUsa Жыл бұрын

Id like to buy some powder from you guys . I do have a tyger account but I don’t want to buy 20 plus pounds at a time so this would be very helpful. How can I do this ?

@laurentr4003 3 жыл бұрын

could you use a primer here? or didnt the customer want that?

@RightNowPowderCoating 3 жыл бұрын

Yes you could use an epoxy, then sand it smooth, honestly after clear these are really nice, and its on a like a 2005 so prob not that big a of deal.

@laurentr4003 3 жыл бұрын

@@RightNowPowderCoating cool thx! 👍

@franklong6269 19 күн бұрын

What was the cost for this job? How does your powder coat with a clear coat added perform? How long does it last. How do you clean it. Will it last for several years and not peel, flake or crack? Your viewers will want to know the answers to these questions.

@edutechnic9621 Жыл бұрын

Why not add a wheel primer then silver? It really helps fill those pits with 1-2 light coats.

@TwinTurboToyota 2 жыл бұрын

Heard plastic blasting is better on wheels is that true?

@RightNowPowderCoating 2 жыл бұрын

um...what? Does not sound like it would leave much for mechanical grip.

@gregor_bs335 3 жыл бұрын

Which RAL colour? 9006?

@RightNowPowderCoating 3 жыл бұрын

Its a silver from APC

@patricksmith8205 3 жыл бұрын

What does it cost to have wheels coated

@RightNowPowderCoating 3 жыл бұрын

Really depends on location and color, we start at 135 each

@sherryhodge2207 Жыл бұрын

I recommend a marine air fan. Simple 12v setup that will clear up blasting chamber/ visibility a ton. Also, adjustable flood lights work great as a cheap "after market" light with cheap bulb replacement vs led

@jasonstinson6503 9 ай бұрын

No sand blasting will only cause etched rims with clear coat on them meaning they will be destroyed

@70ixlr86 Ай бұрын

Nice work, but the inner edges of the rim are the business zones. Aside from the off looks of the rims in original state, They leak air. The resulting outcome of not paying a lot of attention to the rims inner lips result in consumer useless, pretty dishes. A spin on an old tire balancer or lath using a bit of sand paper tends to actual fix the issue. Coating the bead surface professionally helps to protect the beads from unscrupulous tire changing tech as well.