I’m so glad I found your video. I went to the scrap yard and got a relay for £2, fitted it and “voila” it worked. Really fiddly job but I did it and it cost £2. Thanks so much for your video.

Excellent video. Good that you use OEM relay. Some aftermarket relays don't fit. While their 3 pins likely do fit, the relay box may not fit in the groove of the relay holder (grey part with the clips).

Video most useful - thanks. As others have said, getting it out is a pita! For those that can solder and repair printed circuit boards, thers's a much cheaper option than buying a replacement flasher. One can carefully prise off the case of the flasher and there is a small Omron G8QN relay on a printed circuit board. That is the faulty component which can be unsoldered and removed. Be very careful with the soldering iron and solder sucker as surface mounted components are close by. The Omron relay has been discontinued but a replacement one, Part No MCCMA51-S-DC12V-C is available from CPC Farnell for £0.98 inc VAT plus postage. Don't blame me if you damage the flasher but you've not lost anything, but could have saved £50+, as you'd have to buy a new flasher anyway. Good luck.

My daughter's 2009 left turn signal started to flash rapidly and I couldn't figure out where the relay was and the state inspection is due this month. Great video an d thanks for the helpful information.

Thanks for this! Very helpful indeed!

That freaking relay was hard to get out. I took that bolt out on the bottom corner and lowered that electric box to get it out a bit easier. It did fix my problem! Thanks

absolute legend

Bro, thanks a lot. You are a superstar. Your video really helped me. One more thing where did you buy the new relay from? I checked online it's about £60 and not sure it'll fit. I really don't want to order online and find out it's not the right one and go through the return hassle.

This guy is a legend, thanks alot saved alot just by watching this video, and the explanation was very good, the part where the relay popped out was funny though 😄 Nice one bro

Thanks for the help

Thx a lot for the tips.Take into account that it is possible to work eassily if you unscrew the fuses board. I tryed to find the relay in the auxiliary market, but there is no information of the esqueme, I went to a Honda dealer....that is 80€....then I went to a scrap yard....and 2€ solved the issue!!

Thank you Daniel San

Dam so hard to get to, good video bro.

this video was really helpful for me👍

Easier said than done. That was a pain to get out. Thanks for the video though

Just so you know a fuse can test good and still not work just had it happen to me and it was a Acura RSX wasn't for the turn signals it was for starting the car but still it can happen they'll test good you'll put it in and it won't work I changed it with an oem fuse that was used the car started right up put the new fuse back in the car didn't start just putting that out there that it can still be a fuse and try to use OEM fuses not cheap aftermarket ones. That fuse was in there for a year never had a problem until the other day

I'm surprised so many people don't look to the relay as the first source of the problem. I'm having the same problem. My signal will blink once, and then nothing. However, when I push the emergency/hazard switch, all the lights bling continuously, at a normal frequency. This makes me think it's either a faulty signal relay, or a faulty switch (the toggle stem switch on the steering column). The relay costs about 12.00 to 30.00 USD and easy to instal. The switch can be removed, inspected, without buying anything. Sometimes the switch connections are dirty, sometimes wires are loose. Some of the problems with the switch can be fixed by cleaning the connectors or repairing the wire connections. The switch costs about 40.00 to 90.00 USD.

Thanks bro great video . I gotta change mine today,!

this video saved me time and money. thanks!

Spot on, thank you. 👍

Unfortunately he cuts from laying down to the location without seeing where he goes but i can figure it out. Good vid!

Thank you so much for this video! It really helped!

Thank you so much man👍

FYI. I didn't have a new relay to look at, so I assumed the tabs on the relay were small. I wasted a lot of time trying to pull the relay, and is seemed like it was stuck. Problem was I hadn't pried the little locking clips out far enough.

What about the beep alarm when the speed exceeds 120 km? Do you have a solution?

UNSCREW THE ENTIRE FUSE HOUSING BOX, ITS ONE BOLT, AND PULL IT DOWN TO CHANGE THE RELAY. ( dont struggle trying to get it out all the way up there )

I got the same problem wouuu tank you you save o lot of money

Great tip love it

Thanks for the video tutorial!

Hi, are you in UK? Where you get your relay part? If go to Honda garage should be expensive, i have one from eBay, but not the right size! Thanks

Thank you!

Nice video very helpful 😅 thank u

So even if the blinkers work 50% of the time it could be this? Cause mine work most of the time but then it stops, it is off and on, it's a 2004 honda civic coupe

Great instructions!

Thank you.

Great tip on changing the relay as a cheap and easy fix. Thank you. Checkout Hide Seek's comment on how to make access much simpler. It worked for me.

Help me my Honda civic 2002 am checking everything but i lost power of gear box what can i do?

Tks 👌🏻

Thanks bro 👍😁

Thank you bro

thanks a lot, im going to check this way to fix the same problem, hope it will work :D

What if that don’t work I checked the fuses changed the relay now what do I look at

Have this exact problem but in my SI there are 3 giant cable sleeves blocking the way.

Mine is a honda ridgeline 2006! You think i need this in my truck??

Thanks I have same problem and you helped I will change relay !God bless

Nice one bro thank you

What if I already replaced this and it’s still not working?

Does this work in Honda civic 2010

Thanks!!!✌💜💜💜

The part number of relay in the description is different to the part number of the relay installed

Save $ 300 with your video

Grasias bro mearrastes 300

I have problem with the headlights if you can help me pls

When I turn my indicators on. It just stays on, it doesn't blink...same with the hazards. Plz help😭😭

Omg my dad is whining the past hour cause he can't take off the fuse

Are you sure I think it's the other relay box beside that one.

Mine did not work. I change the relay

Does anyone know if vehicle diagnostics would pick up bad relay?

I changed it still didn’t work on my 1999 Honda Civic 😤 so what’s next

My didn’t work what can be the problem

Tried this it didn't work, hazards work but the rear turn signals do not.

and control cruise is mass😩😩😩😩

Aorre 309💵

Thank you!