From Mauritius. I have been struggling with my deebot for weeks. Every 15minutes it was signaling mainbrush malfunction. I was almost about to throw it and buy a new one. But you solved my problem. Thank you. You saved me some money

Thank you so much for solving my brush problem. It had a frozen bering. I'm a 71 yr old that loves her Deebot. It makes me so sad when it keeps beeping and stopping. Your demonstration helped me to fix it easily. Thank you!

Simply fantastic! The information here enabled me to fix repetitive 'main brush jammed' errors on my Ecovacs Deebot T9+. The brush construction was a little different, but the principle was the same. Thank you so much for making this video!

Our ecovac pet hair was collecting in the brush and not going to the bin. We were stressed bcos it was just 3 months old. Thankfully we saw your video and thought of giving it a try and worked. We are so grateful for this video

Oh my god I had tried EVERYTHING and this finally fixed our vacuum. Thank you!

Thank you from Chicago! I've been dealing with this "main brush error" for about a month, and it's been driving me bonkers. After watching your video, it took me less than 5 minutes to dig out an unbelievable amount of hair out of the bearing pin assembly. "DJ Roomba" is back to sucking better than ever!

Thanks so much. It was the bearing side that got me because I wasn't sure I could take that side off but after seeing you do it I was able to fix my vacuum. Watched a few ads for you.

You just made my day! I cleaned my main brush and it looked perfect and still was saying tangled and I was so confused. So I decided to google it and try and work out what was going on. This is EXACTLY what was going on. Thank you so much!!!!

This was EXACTLY my problem. Thank you for sharing how to fix this!

Thank you so so so much! Today was the last day of my apartment least and my vacuum was giving me this error. Absolute panic. This was such an easy fix and saved my security deposit and sanity.

Thanks for this video. Altough it wasnt exactly the same brand nor the same solution. I cleaned the brush and the bearing and still nothing, so i checked the other side of the brush, where it has a plastic square shapped form that goes into a rotor in the motor of the robot vacuum. Activating the vacuum without the brush upside down made me realice it made some noise meaning effort to move the thing that moves the main brush, so i thought it would be a lot of work to disassemble all the robot body just to clean that part. Luckily before giving up i tried with a needle and other pointy stuff to remove the dirt around that "gear". It didnt worked either, so i forced to move it and showed some more clog. i cleaned it again, forced it to move manually, and clean, forced again and clean, and there, the vacuum is working again. Thing is, small dirt will always eventually get inside that part and sooner or later i think everyone is gonna have this problem, altough i feel confident that this that i said is the solution for everytime it happens. Again, i wouldnt have figured it out without your video, so thanks again. BTW: manual said "error 46: main brush clog: take the vacuum to service".... yeah dude, right... manuals should just tell the people how to fix this kind of stuff!!!

thanks bro you are the only one that had this instruction video for the U2

From Australia my deebot u2 had the exact same problem and you, my friend and saved me heaps of money.

Thanks very much. You helped me to fix my vacuum, it was driving me nuts!

Thank you - less than 90seconds into the vid to work out how to sort it and then less than a minute to get back to cleaning.

Thank you so much! I couldn't figure out why or how to get it out. Lots and lots of hair. All fixed! 😁

Sir, thank you so much for your tutorial. I was able to do exactly what you did in this video and my deebot is working like new!!! You’re amazing in explaining and your camera person is also very good.

Thank you do much! It helped me to fix my Yeedi!

Thanks! This fixed the problem for my vaccum!

BROTHER, THANK YOU, you have helped so much!

Thank you. Fixed my problem. Wonderful..

Omg this video safes me from buying a new brush🙌🏼

Thanks a lot, I have just fixed my robot with your instructions

It worked really well and thank you 🙏

Thank you so much..My eco vac had the same issue.

Worked! Thank you

Fixed it for me! Didn't know you could pull the pin out of the roller head After cleaning all the hair it's working again

Thank god i found this if it wasn't for this video the robot would have gone to a repair shop

Thank you so much for this

Thank you 🎉 I hope this is what my issue is

very useful thanks 🌸

Thank You very much❤

Thank you so so SO much!!!!

Thankyou!

Thank you so much for the video

Used your video to fix my Yeedi K650. Same procedure, but the pin is contained on one side so you need a tiny punch to knock it free.

thank you ❤

Hi, could you suggest how to clean the same hair stuck in the silicon brush - for Deebot U2 PRO . I have 2 main brushes. One like the video and the other one like a silicone brush. I want to know how to clean it.

I have a 710 deebot, says brush is jammed even with the brush removed. I have removed all the screws and unable to take the cover off, do you have any suggestions? I live in northern Canada and its over $100.00 to ship

The mop pads will not spin on my ecovac t10 omni. they just quit working. ive reset the omni but still they wont spin. removed mopping pad plate and cleaned them but still wont spin. on occasion for a few seconds the mopping pads will spin and then stop and will not start spinning again. Is there a belt for the mop motor that may be worn? to explain why they only will spin for a few seconds when your not expecting it and then stop. what is the address for a return depot for a return under warranty from canada. i know i need an rma first but only want to estimate my return shipping cost.

I have been doing this and it has worked wonderfully but looks like the other side of the brush which actually rotates the brush is getting jammed. How to resolved that?

my main brush rotates slowly for 2 seconds and stops. I checked by removing main brush and touching the attachment point in the robot while starting it

Can you have a close up video of how to re assemble the main brush , it was easy to assemble together at first but then I put it on the wrong way. I need a hammer now

what if main brush motor is not working

And if pet hair brush is jammed? Pls advice how to open and clean

I could remove the brush end cap if the main brush wasn’t stuck in the machine. I’ve removed the main brush before for cleaning, but now it is stuck and won’t come out. PLEASE HELP

Hi dear I have a problem with my t8 aivi ... I got message to clean Anti drop sensor, and I cleaned properly but still not working and there is something inside one of this sensor like humidity ... There's a way to open the sensor to cleane ?

Very useful information. The main motor has a small sqare plastic part ( left side) in which the roller bearing goes. How to remove that part? Is it necessary to remove it for cleaning? Also how to fix it back?

Hello 👋 thanks for video . Friend please advise me how to clean 🧽 the anti drop sensor from INSIDE on DEEBOT OZMO T8+ ( it got some dirt ( orange dirt looks like iron acidity ) )? The sensor is back one I have already unscrew all but still can’t get there Thanks for your time

I cleaned the brush end just like you showed and there was lots of twisted-up hair. The Ecovac D79 still beeped 4 times. I changed the brush motor and battery and the Ecovac still does not work. I purchased a new roller and still no luck. Any ideas?

Bro u saved my house

The problem I'm having is that my old main brush works fine but any new main brush I put it, the machine says main brush tangled. If I put the old brush back in, it works fine. What is causing this problem? It's a brand new EcoVacs brand main brush right out of the box. Nothing tangled on the brush itself! It spins freely when I twirl it in the machine.

Can you do a video on replacing the main brush motor? Mine died after 14 months. Also the vacuum fan only works on one side.

What do I do if i still get the error after cleaning the brush bearing? I even get the "Main brush jammed" error when the brush is not installed? Do i need to open the bot and try and see if hair is stuck in the motor mechanism?

Hi bro, I recently bought Ecovacs Deebot U2 pro from Amazon.in... However, one of the side brushes got stuck today with hair.. I am not able to untangle the hair... I am tried to cut the hair and remove but hair didn't got remove in full.. can u please tell me or share a video how I can remove the side brushes, clean them and fix again?

The rubber on the main brush cover gets folded everytime my deebot 500 starts cleaning. This pushes the dirt past the robovac. Any solution for this? Any replacement part for the main brush cover?

Hi, let's see it someone can help me. I need to disassemble the T8 empty base station due to I have purchased recently and it is impossible for me to take back to my country in the airline as a box. So in order to insert the base station into the luggage I would need to disassemble the tower from the base, unscrewing about 4 screws. Do you know if by doing that, I can break any cable or electronic mainboard that then makes the station useless when I put it back together?

How do you clean the main brush motor ?

Hi. I have ozmo 920. Im unable to remove the main brush at all. Can you please show how its done.

Can u make same video, but in better quality? I unscrewed brush, now cant put it back, cuz of poor video quality cant see how u put it back properly :D

The main brush is spinning even when is off..pls help

Can u PLEASE fix mine? I think the main brush motor is broke :(

I bought a new main brush….still not working…