hello, some users are still having problems! I'm willing to help anyone on, a one to one basis, send me a message on discord @holytrinidy and i will get to everyone! we need to find what setting works for every on a individual way without compromising visual fidelity! cheers pilots!

i can't believe i was having so many problems with the lossless scaling app and my settings and this 7 month old video of settings actually fixed all my issues. i NEVER ever put the terrain level below 100 - and my RTX was not able to work with frame generation. I literally put it on 70 and it made my sim ENTIRELY DIFFERENT. Thanks for the video and the idea man!

Thank you so much for this video. Replicating your settings has got me to around 80 fps average and no flickering!

Thank you , finaly getting good frames without jitters etc in msfs especially within the fenix ;)

Thank you very much for this explanation bro!!! This made EWR and JFK much smoother!!! thanks!

thanks you found a hope for me to fixing this annoying things which i spend 2 day to fix

Terrain level of detail is mainly CPU dependant, so if you increase this, you increase the CPU load (and normally hit the single core bottleneck) hence the frame stuttering. If you have a 5800X3D for example, you should be able to run the setting much higher than a 5600x with the same GPU and settings.

I started using the mod a few days ago. I use the 0.50 version with my rtx3080 12gb gpu. My sim works perfectly and I now have everything on ultra and still get 110fps on average even over cities. I don't fly with those noob external HUD things so having them jittery doesn't bother me. It has transformed my sim. It looks and performs fabulous on my 34" Oled monitor.

Thanks for the explanation. Unfortunately in my case, only in-game menu/hud would be jittery even when I have the LOD right down to 10, but the actual aircraft itself was smooth.

Good video, thanks! Can you let us know what software you're using for the readouts on the left?

Do not use the Gsync capabilities of your monitor. That helps to.

For me it just helped to disable Frame generation and enable it again

What you are seeing here is a maxed out CPU. High TLODS kills your cpu. If the two rasterised frames are too different (because of a stutter) then frame gen doesn't know how to create the intermediate frame between them . This causes the wild instability when panning. Frame generation won't fix a flooded CPU. What it will do however is allow you to alleviate pressure on the CPU. Example: Lets say you get an average framerate (without Framegen) of 40fps - (it may dip below this a bit when panning because of sudden cpu stress). Now turning framegen on will give you around 80fps. This now allows you to cap your frames to, say 60fps, thus freeing up your cpu a bit

Please please I'm fed up of FG smearing. Question. Which DLSS version r u using. U can see this by DLSS swapper . 2. Is your Ray Tracing on in UserCFg ...

Thank you! It's worked and really improved.

Thank you very much! I'm running the SIM with an RTX 4070 and an I7 11700F, with 32 gigs of DDR4 RAM. Before I maxed the terrain level of detail to 400 during a VFR Flight (not the smartest option) because I didn't see any performance impact, but I did not notice the VRAM usage and when I tried tò spawn in Frankfurt with my A320 the SIM Just kept crashing, and if It didn't crash I was getting 15 FPS. I tried your settings and the problem was solved. In my opinioni the performance Is more importante that the graphics, but I figured out this rule: small prop Planes and VFR Flight, max out graphics, VATSIM and big payware airports, low graphics.

Cheers man hopefully this works 🙂. I’m on steam and is there a way to show your ram usage how do you do that?

So the problem is LOD on msfs. i have the same issue with my 3080ti and 7800x3d. I reduce the lod and the problem on cockpit is solved. tks alot!!!!

I tried 0.6 but havent tried 0.7. At version 0.6 i did not have the problem that you described, but I do have textures glitching like the tires, cockpit windows and UI. And I was also not able to load A320 Fenix, it would just freeze the sim. And with DX12 I had random CTD’s. Im doubting to try version 0.7. Because its still a really impressive game changer. BTW using RTX2070. Cheers!

I have a large home cockpit using 3 SONY BRAVIA 43" TV's. While I get great FPS on the center / main monitor using FG in MSFS, Frame Gen doesn't work on the left and right screens. Does this mod supply FG on just one screen as well?

Hello ! Very nice videos keep up the great work my friend.But I have a question I have the same exact graphic card as you but I can't get the NVIDIA DLSS FRAME GENERATION to show up in my sim no matter what I do I'm I doing something wrong .Can you please help me with this .

No matter what I do I cant get away from the texture flickering/ghosting in my cockpit view. My FPS is amazing, maybe double what it was. But I had to turn FG off as the flickering was just wrecking my experience.

I confirm that with my 3090 despite the 24gb of VRAM, it was at 92% with the Terrain LOD set to max (400). At 200 Terrain LOD, I could have a smoother experience when panning. Yet artifacts or flickering of windows and menus still there. And by the way, I use TAA and not DLSS as it makes my glass cockpit blurry

Great video and info!

Game changer fr its smooth asf for me now

Please help: 1. No previous mod whatsoever. Installing latest dlsgg (unviersal) 0.9 by putting just those 2 dll files in my C:\XboxGames\Microsoft Flight Simulator folder. 2. Scheduled GPU etc. enabled in windows 10. 3. Open simulator, frame generator on, v-sync deactivated. Dx12 on. Restart simulator. Going from previous TAA with no frame generation and dx11, to frame generation on and dx12 will make my fps drop from 50 to 20. What am I missing? EDIT: RTX3070 and flying in 4k. Could it be a vram issue?

Thing people need to understand is that this mod was made for CP20277 and Witcher 3, we're using it on MSFS 2020, so it will have it's imperfections. i just tested out .70 patch it's hell of jittery and buggy, i was using .5 no problems compared to the latest. I just reverted back.

man how do you have all the airports on the world lol, its like a pack?

everything is smooth for me, get about 60 frames over london but the hud is still horrible and i have found no fix for that

Thanks :) , What gpu and cpu do you have?

I have two same monitors (2560*1440@144hz), when my mouse is in the main monitor with sim running, there are flickers. (Seems like the generated frames have a small lag). But when I move my mouse to the other screen (and click it once to move my mouse out of the sim), the flickering just disappears. Mod version is 0.8 and GPU is 2070S.

Sir when i flew aircraft and ECAM Dsipaly not showing normal message.only engine information come and downside no have any describe message showing me please make video for solution

got a r5 4500 16gb ram and a 2060 6gb and running fs2020 on high end everything with 55-60 fps in cockpit and about 70-75 fps outside sometimes even going up to 85 so this mod def works like a dream

The engine turbine flickers as well as the landing gear when I throttle up? Any fix to this?

I only have issues where the sim comes to a near standstill on approach. Haven't figured out a fix. I think its a CPU bottleneck. Hate this AMD CPU I bought in 2020

I'm on a 3080 and I got same struggle with the stutter and jiggling! Just reduced my LOD to 70 and testing again.

does this fix the flickering of the HUDs as well while being in external camera view?

I have a 3090 so I doubt Vram is the issue considering the card has 24 gigs. In the right corner of my sim I get a huge black/blue square that keeps flickering after I select an airport and load in and it just won't go away for some odd reason.

sir please make video camera view settings

Hi, what is the program that’s showing your fps’s and vram?

the only way I could fix the jittering here, was setting to 1440p

Do u recommend to use Reshade with this Mod ? does not cause any conflict?

i just do ALT+ENTER and it fixes

Seriously, get yourself a RTX 4000 series GPU with 12 GB or more VRAM. Image generation is an exclusive feature on 4000 series and it fixes all those stuttering and so on. Never had a similar smooth flight simming experience on any sim or rig in the past 20 years.

Is there any fix for the UI flickering when using frame generation?

For me, appears "Your graphics device has encountered a problem" while using DX12 How to fix? 3070ti+r5 5600x

Will I have this problem if I use a RTX4000 card?

How runway textures look so crisp?

I downloaded the mod, but the frame generation option doesn't show up. But the fps is still a little better

Hi, I cant use the Fenix A320 with the FrameGen Mod. It's only when I load into the Fenix A320 the sim crashes. Any help?

How do I stop the screen tearing with fram generation?

what is the name of the app used to monitor cpu gpu etc...?

My RTX 3050 after work my MSFS2020 is Stuck and automatically closed? what the solution .when i use Flybywire and normal after flying 17 minutes error com and close automatically game?

70% LOD is not good for vision far to the horizon. This is not a solution. At 70% you have a lot of frames and no FG.

WHAT MOD are you talking about? I have watched this twice. What am I missing?

Hello, my game still doesn’t work and when I load into a flight my game just crashes and then I can’t load into the game. I’ve lowered my terrain level of detail. Please can u help. I friended you on discord and would very much appreciate it.

How can I solve the Hud Flick problem?

Try using the in built fps meter and you will see the true FPS.

Hi, thank you for sharing this amazing mod and settings. I installed everything and followed your steps. My FPS in the sim improved but my sim is now running unstable. My sim is crashing and I am getting this message: "Your graphics device has encountered a problem and the application will exit. ERROR DXGI_ERROR_DEVICE_HUNG (0x887a0006)" Hope You can help :( My Stats GPU: GeForce RTX 3080 (10GB) CPU: Ryzen 9 5900 12-Core RAM: 32 GB

What CPU do you have ?

Will this work for RTX 3050 4gb

If I need to scale back the texture resolution so far back why should I use FG. You can just use DX11 with the same frames. It's not the mod that is the issue but the broken msfs Dx12.beta. Dx12 in msfs never worked for me.

I followed you guide carefully but still got stutter, jitter and flickering. My specs is amd 3700x, rtx 3080, 32gb ram. Although I reducced level of details to 50 and object detail to 50 but no luck. For more detail, please take a look here, from 3:59 kzfaq.info/get/bejne/eahhhpurl9K0nqc.html

207 processes running get rid of some of your bloat

I love how all these "fixing stutters" videos boil down to reducing tlod to < 100. You don't say!!! Let me tell you this: you won't have ANY stutters at all by not starting the sim!

sir can you setting my game online i am from saudi arabia .if you have a time by team wiver you can support me pls thanks

OMG IT WOKED

just buy a 4090?

"As Smooth as a Cake" 😅 Never heard that saying before!. "As Smooth as a Babies butt I've heard" lol...Just kidding bro. Anyway, thanks for the tips. I am going to try your settings. Yea, I have the same graphic card, an EVGA RTX 3080Ti 12GB Ram and the same Fenix A320 Aeroplane. But the issue I am having is when I have an open window on the screen like the Map or the Camera option screen etc. it starts to jitter with FG and I don't like that. Also, I can't seem to get 60 FPS. Only 29 to mid 30ish. It must be some of the addons I have install..I have many small little addons like birds flying around, new taxiway graphics and taxi signs. That could be my issue with FPS.

Am i the only one who have grayed out on off button for dlss frame generation 😢😢, i watched 100 of videos and did exactly the same like all people, and still nothing...rtx 4060 8gb

Hi. 🙂 What monitoring overlay are you using?? 📈 📉