That’s awesome. Congrats on fixing your problem.

As I showed in my video, if you take out your magazine, look down through the little magazine feeder and pull the trigger. Do you see the internals moving when you pull the trigger?

@@AustinAceyes but nothing comes out

@@411dave_ then my best bet is that somewhere inside the gearbox there is a dehydrated ball preventing it from sliding all the way back so the next bullet can load in recently. I went out with my buddies, and I used my gun for a little bit. Forgot it in my truck and I did notice that there were some dehydrated bullets inside the magazine, so I might have to take my gun apart againand check it out, but if there is something in it then I’ll take it apart and I’ll do another video

@@siahupnextt if you take your magazine out, hold the gun upside down look in the magazine well and pull the trigger. Can you see the hammer moving back-and-forth?

@@AustinAceno its wont move

@@siahupnextt when you pull the trigger does the gunmaker VRNNN sound internally because if so, and it is high-pitched that means you might’ve chewed up your teeth on the gear, but if it doesn’t move at all and it doesn’t make a sound either something is inside where your motor is trying to move it and it is stuck or wire came undone

It might be the same issue that I had where a dehydrated Orby got stuck inside the gearbox, preventing the hammer to go all the way back to let you load another bullet in, and if not that then your magazine might not be feeding the bullet up through the magazine into the gun

@@AustinAcei have the hmer problem

@@Luh_Ace. when you say you have the hammer problem, I am taking it as everything works perfectly fine with the gun. It’s just not going far enough back for the boats to slide up into it to get launched out so most likely this video will help you solve the problem.

Thank you means a lot here to help

I would maybe recommend seeing if you can talk to any of your friends that have the same gun as you if you just need a new battery that your current battery doesn’t hold his charge anymore not check the connectors where the mag connects into the gun to see if the terminals are dirty or if if there’s anything obstructing it

So I do not have my gun taken apart in front of me. I just went into my video and took a screenshot and I am going to post that on my community page so you can see how the magazine one clips

@@MercyBanisher3 it might just be up the magazine has to have contact with the two spring connectors inside the magazine well because that gives it power to the magazine, so your magazine will automatically load the bullets up to the gun

@@AustinAce ok thanks

Maybe try taking your magazine out of the rifle hold it upside down with a flashlight so you’re looking down through the magazine well on the gun and lightly tap the trigger so you can see the internals moving front to back to see if the bullets have enough space to pass through the loading tube if not, then I would probably suggest that you do have a dehydrated ball somewhere inside there

What do you mean it cuts out and doesn’t shoot? Are you saying that your gun shoots but sometimes it doesn’t launch some of the bullets and then other times it does launch the bullets.

@@AustinAceyea mine does that why

To me it sounds like the same issue I had you’re just gonna have to keep searching all around inside the gearbox until you find it unless it’s stuck in the gears

The thing is one gel comes out every like 6 shots, so I think sometimes the hammer goes back but most of the time it doesn’t. I don't know what determines if the hammer goes back or not

@@P0rkch0p999 see I had that issue as well where it would sometimes shoot a couple bullets, but sometimes wouldn’t the reason was is sometimes the gel bullets aren’t all exactly the same size. They’re a little bit different depending on how long they’ve been out of water and not all of the gel bullets are exactly identical to the same size of each other so sometimes they’re a little bit bigger sometimes they’re a little bit smaller, but the hammer not going all the way back is what helps not feed bullets into it so in the video what I would suggest to try figuring out is if you hold the gun upside down with the magazine out of the gun and put it on fire and just keep tapping the trigger slowly to see if the hammer goes all the way back and then goes all the way forward and if it doesn’t go all the way back that does prove that there’s something preventing it from going all the way forward

So I fixed all that, now my only problem is the gun only shoots upside and it shoots perfectly upside. Do you know how to fix that?

@@P0rkch0p999 good job fixing your other problem. The only thing that I can think of to fix this problem is if you either put new fresh ammo in that has had the designated time of soaking so the bullets are the right size. Or see if you’re buddies or friends or whoever else has the same gun as you if you can borrow there magazine and try that.

Hi, when you say the mag won’t shoot the Orby’s up, are you talking about the little gear inside? The magazine won’t spin to feed the boards up or it is spinning and feeding the bullets up into the gun, but it is not chambering around.

@@AustinAce yes the little gear ⚙️ the wheel won’t shoot the orbeez up

You might have to check the connections on the magazine and see if they are bent so they won’t be able to reach the other connections on the inside of the magazine well or if there is something blocking the springs from the inside of the gun to make contact with the magazine

@@masonm2140 yes to me that sounds like your gear is stripped so you should probably just need a new gear

@@Brownskin_mira take the magazine out of the Maxwell hold the gun upside down look into the mag well pull the trigger. Do you see the hammer moving back-and-forth? If so, then check if the gear inside your magazine moving when you hit the trigger if so, the only option would be that there’s something inside of your gun shown in the video preventing the hammer from going all the way back to take the next bullet.

I honestly don’t know exactly why that is happening but it sounds like it would have to be something with the gear box so you might have to take a look internally. What I would try to do is try to connect the battery and have the gun taken apart so you can see the internals work as you try to pull the trigger to see if anything is stuck or preventing it from shooting. But I will try to find out and look in to it and I will try to let you know my findings. Good luck

Fix the spring, it’s probably miss placed

@@ttommy281 how do you go about doing that. i pull the trigger on semi and it works, on full auto it maybe shoots 4 sometimes

@@urinesoakedtroglodyte5764 oh then idk

If the gear spins backwards, and that probably just means the power is in the wrong position, meaning flip the battery

@@AustinAce I feel so dumb😭 I had spent three hours disassembling it just for the battery to be in the wrong position. Thank you

@@therevenantmain3440 don’t feel dumb. Everyone makes this mistake but don’t quote me on it. I’m not 100% sure if that is the issue but usually if you have a different polarity, it makes everything run in reverse so instead of the positive being on the positive wire it’s the negative on the positive and positive on the negative

@@solarogx7476 I would recommend yes because depending on the ammo you buy there is a recommended amount of time they need to soak for which the normal SRP ammo is three hours if they soak anything under the required amount, then the balls or bullets won’t be the correct size so it might affect the gun

Update 100000% soak for 4 hours

There might be some thing stuck inside the motor jamming it, so it wouldn’t move

Have you taken your gun apart and it did anything to it like I did because it sounds like a similar problem that I had which I showed in my video about the dehydrated ball getting stuck inside of the piston part that shoots in marches the ball out

you would have to buy and replace or buy a new gun

Yea there no replacement part do I just bought a new gun😢

@@Satisfying-details that stinks

Did u mod you gun in any way How long did the bullets soak for

Off the top of my head, I don’t remember using any bits in these videos. The only thing I can think of is a Phillips screwdriver but when I get home, I will rewatch the video to refresh my memory.

👍

@@jaydiffrnt what on your gun doesn’t work?

@@AustinAce the gun doesn’t shoot at all and i think it’s the battery or it has water damage

@@jaydiffrnt I would probably try by getting a new battery and try that out to see if that’s the issue

Do u have enough ammunition

Are they fresh ammo

@@AustinAce yes it’s full. I have to put the gun upside down to shoot it

@@selogee if you hold the gun upright like in normal position and go to shoot, does a shoot out fragments sometimes for nothing at all or both

Not 100% sure but it might have something to do with the internal mechanism that allows you to switch between semi automatic to full auto. Maybe one of the gears on the inside that allows you to switch between the three of settings is missing some teeth or got loose.

@@AustinAce so what would i have to do, do i unscrew it n find whats wrong

@@februaryy-1 I’m not 100% sure you could try finding out what’s wrong maybe even opening the gun up and seeing if there’s any loose wires to start with

I’m not 100% sure on what the issue could be could either be that the gear inside of the gearbox the teeth broke off of it so it just spins and it doesn’t move or your motor isn’t working

@@AustinAce how could i open it

As far as right now, the only thing that I can think of that is preventing your gun from firing is, if the hammer doesn’t go all the way back to load a bullet into it to fire it or your magazine have a good connection to feed the bullets upinto the gun

If you watch my first video on where I found my gel ball that was jamming my gun and how I troubles shot it to find out whereabouts it was located. Try doing that if you pull the trigger and nothing moves it might be in the gearbox, but if everything moves, but it just doesn’t slide all the way front it might be around the same area where mine was in the video.

Of course, I couldn’t find any answers on my mind stopped working, so I took it upon myself found out what was wrong posted a video on my channel to help others that were in my shoes. Glad to help anyway, I can

Silly question is the battery charge and if it is, is it plugged in?

Does it try to make stuff move or sound like it wants to shoot?

no

@@AustinAceyes

It jus sound like vrrrrrrrrrrrrrrrrm

Hi Manuel I just posted a picture on my community page for my KZfaq channel check that out. I hope it helps you if not, let me know and I will make a short video and show you how to.

I recorded a video about me taking apart my gun and showed you how to attach it. It will be posted tonight when I get out of work.

@@AustinAce Ok thanks

Hi Manuel sorry about the wait but just posted the video. :)

To me, it sounds like your magazine might not have a good connection to the battery terminals inside the mag well see if there’s anything obstructing it or if the springs on the inside is bent a little bit