This guy really woke up and said ima make the shittiest DIY video today lmao

Wtf is this 😂

Ahhh... that first layer was the whole can🤷🏽‍♂️!

I knew this comment section would be worth it

I this this the worst DIY you’ll find on youtube.

The guy claimed it was the cheapest way to fix it. It's not great, I would go as far as say it looks like shit, but he did not claim it would be great.

Spray pattern should stop and restart at the edges. If you keep the button pushed continuously while you move back and forth then you build up too much paint during the transitions. And it is recommended to apply light even coats, let dry, then do again. You put way too much paint on the first coat.

Don't quit your day job. I sure as shit hope it's not painting cars

Seriously I have no clue what I just watched definitely not what I was looking for lol

" The enemy of good is perfect. " Protecting the metal from rust is the priority. He accomplished this. So thank you.

lol, that's beautiful! factory new!

Um this is a perfect video for anybody needing info on how NOT to repair damaged paint!!

cant beleive i took this dude seriously in the beginning half of the video LMAO

This goes against everything I've watched so far: wash your car properly, fine spray layers, even the paint and unpainted surfaces to prevent peeling, let it dry before the next layer, sand again and add a clear coat layer.

Nailed it!

U could paint this whole truck with a similar rustoleum blue, a clear coat and buff it out to look pro for like $100 in an afternoon if you just prep it right by sanding all the old paint and properly priming it. It would be an easy project for a father and son on a nice spring day during a pandemic.. as long as you've got masks!

Looks like a lake on your hood.

Best way to do it if you want your truck to look like a pos.

This was great! now we know what this looks like!

You should go get matte finnish clear coat and ssee if it will haze it up and match

Nailed it 👌

This man 100% did not lie. Lol

If anyone has every spray painted properly, they are cringing so hard rn.

Idea for a new TV Show: SHIT WHEELER DEALERS with Mike Brewer buying the cars and hoohoogoblin making the "improvements" 🤔

My car is 22 years old and I'm willing to try anything, so I want to say thank you for the video.

I have never seen that much paint come out of o spray can in such a small area! Lol. So much that I bet it ran up hill.

My dude, have you never used spray paint before? You need to put light coats

How’s it holding up? Is the new paint still shinier than the old paint?

Dang you ever heard of light coats? Why didn't you just cut the top off the can and pour it on? Sheesh

Like a new one 😄

This is def something I'd do haha

Bruuh you are my new hero!! WTF was that 🤣🤣🤣

That’s literally called “dogs balls-painting”

Lol “if someones 10 feet away”

I will start by saying I've never painted a car in any way shape or form. But this made me laugh. Particularly the comment section. Thanks KZfaq! 😂

A little high build primer could have filled that in to level.

That definitely looks better than it was.......

Dude you’re wearing a particulate mask for aerosol haha. And the first coat should be the lightest coat.

Hi Could I possibly book my car in with you for a full respray?

I mean it ain't great, but it works!

I thought this was a joke video at first. It's amazing how out of touch this guy is. lol

The reason its so shinny is you basicly dropped all the paint on the bonnet like a lake and then it dry. You need to lay light layers of paint and allow to dry! Then you will get more of a matt finish geeez!

Thank you so much for the assist! I am a single mom with a whole passel of kiddos, and our (starting to peel) van is not fancy, but its ours! Im on a very tight budget, and I have better things to do then fret about how perfect the patch job is on my vehicle. All I want is to stop the peeling, avoid the rust, do it cheaply, and worry about it later if i need to. Thank you for your help! This is exactly what I needed🤘😁

uhmmmm.... Yeh.... not your best tutorial :) I think you should sand whole hood. and just reclear.... maybe touch up color a bit... or.... junkyard hood!

Damn you kick that hood's ass

5 minutes of my life I’ll never get back

Clearly you have never painted anything before.

Nice job - anything is better than rust! Most of these ding dongs seem to think that they would rather spend thousands of dollars on a vehicle that's worth less than the paint costs. I say no rust - no problems! It's amazing how much common sense people have - the comments here certainly reflect a lack of.

Remove the hood and sand the whole surface and then paint the whole hood int he garage or undercover somewhere, just takes a couple more hours and a few extra cans of paint... the end result will be a new hood.

I seen cars painted with shine spots and other not so brite. Nevertheless it's a style but if u want it to be the same don't paint too much on the car. Do like one coat complete let it dry see how it matches to the rest of the car. Additionally you did like 3 or 5 coats on your chip paint

not bad are you going to clear coat

Paint it on thick to stick 😂😂😂

LMFAO! This guy never heard of "paint layers"? Geez man, give it a few light layers and let go of the can top every now-and-then :D

What's and paper did you use

It was better before you touched it lol

Should've skipped the blanket, the overspray would make it so you dont have to stare at what you've done to your hood.

I love this. It made me laugh. That being said, I'm going do this exact thing to my Nissan Sentra. Thank you for the tutorial.

This is like everything you should not do, smh!!!

What about sanding, this unfortunately wasn't that helpful and it's the only one I could find that deals with exactly what got, also its not good to do a continuous spray

Oof, I'm guessing this is a work truck. But if you paint, please feather the edges with 120 - 300 grit sand paper, then if you have bare metal, get some etching primer and put a film of that on first. Let dry, then add some sealant primer or sandable/filler primer. Sand it down with 600 grit with light to medium light pressure. Stop sanding once you see the etching primer show through. Clean everything up nice and clean with denatured alcohol/rubbing alcohol/wax or grease remover and a tack cloth (they're dirt cheap). Then just spray two light coats and one medium coat of paint. 10 minutes between coats. Then add another medium coat if you're still seeing primer. Let dry 10 minutes. Then get some 2K Clear Coat, and do two dry coats, then one or two wet coats. Body work and paint is an art form and a true test of patience! I'm not going to dislike because a ton of people just stare at the work they have to do then run away to mommy.

2:20 graffiti vandal at work lol

Bring back downvotes KZfaq this shit is egregious

Primer is good..

You must work at maaco

Maybe using a paint brush would be a better alternative

🤦‍♂️. How about sand paper and primer coat !

So where was the tutorial?

Thanks

Don't think it too much,, its just paint...🙂👍

Wow that looks like shit why even make a video of your results are going to be like that amazing

Why didn't he just pour the paint, it is even easier

This video is for me. How to do it cheap not right.

'let it ry and deal with it later'' jesus HAHAHAHHAHA

lmao this guy is serious

That was um........, pretty honest

that paint has no UZ proyevtion. In a year it will get dull and looks terrible

How do I find the right white??

Its like he's never heard of multiple light even coats ig. Jesus I cringed when he first went in

Jesus. This is the best how not to do on you tube.

No primer??

STOP!! It’s already dead!! 😂 Rumour has it, it’s still drying to this very day…

Its still drying

I had to watch after reading the comments. Yeah definitely don't do this.

This video is the end result of drinking too much rubbing alcohol! "Make sure you match the paint," what the F is this guy looking at. I gave it a thumbs down because I am unable to delete this junk. Imagine, he has 112K followers, are they all from Mars?

look good at 50 feet? try 2 miles!

My lord. What did I just watch?

This has got to be the worst example I have ever seen on how to do this. Dude never even sanded the shit. Looks worse like that.

Lol bodywork is an art

This is the way not to do it lmfao

You was better off with the paint chips 🤣

I don’t know much about painting cars but this sure as hell isn’t it.

At least feather the edges and it would look much better. You're going to have to redo it in a few months.

Welp....I know what I don't want to do now

For old banger only ,Don't do it on your fancy car.

How to make a turd...look more like a trud

i've seen better finger painting done by my 4 yr old. but as i always say whatever floats your boat. or sinks it.

This guy must have painted another car before this one and inhaled some fumes! Watchout and stay away from this video unless you want a really good laugh.

This is as equivalent as a GED that’s about the dumbest thing I’ve seen

Do not do this unless u don’t care bout your car this prolly shtty diy I’ve seen 😂

Needs more paint! 🤣