The coils of the yoke are not are shock hazard unless they are damaged, in which case you'd have more issues than just a wonky image. While making sure there isn't any damage to the insulation before messing with it is a very good idea, under normal circumstances, you aren't going to get shocked from the windings themselves. The wires are all coated in an enamel coating to prevent any electricity from shorting between separate runs of the same length of wire. The exposed posts on top of the yoke however, if not covered, can potentially be a shock hazard. That said, from an editing and photography point of view, a great step up from previous videos.

Glad you're doing modern tutorial videos of good quality.

Just did my first CRT adjustment thanks to your channel and this video :)! pretty happy with the outcome. Thanks for putting this information out there.

The best fucking crt tutorial, I've seen many of them and no one explains in that way like this guy does, keep it up bro

Perfect, concise, and to the point. Will be doing this to my 13in Trinitron TV with a tilted image. Thanks for the video!

This is some quality content in both information provided and how it's presentation. Well lit, subject actually clearly in frame, and no talking butt video (presenter between subject and camera). Subscribed!

Great video! I'm a huge fan of your work! I'm in New England but hope to be able to hire you to fix my PVM someday! It's so hard to find someone trustworthy that works on these old TV's! Thank you!

This helped me save my retro gaming tv. Thank you so much!

attempting to adjust the crooked image on my Toshiba CZ32 model! Just unscrewed the back of the tv and came to watch again for last second refresher. Thanks again!!

Awesome info. I recently acquired a Sanyo that is suffering from some pretty severe purity / convergence errors and will be trying to adjust it this weekend

Amazing information, amazingly presented! Thank you so much :)

Following the illustrations here, I was able to straighten Apple IIc monitor. It's a monochrome, so fewer rings and one tightening screw. Thank you for the tutorial!

Very cool to see that 1350y opened up!

Awesome video. Just found an old TV in the attic of the house I just moved into. It has a slight tilt and edge discoloration. Going to familiarize myself with safety steps before tearing it apart.

Great video Steve! Very clear and informative. Didn’t even realize the Patreon account was live; time to become a Patron!

Man this is a great tutorial but I'm deathly terrified to even open a CRT TV, maybe in the future I'll fix my yoke misalignment

I learned a lot thank you❤🌹🙏

Doing God’s work

Very useful. Thanks.

Thnakyou. Amazing Channel, Subscribed.

Thank you!

thanks for the video. Now i know how to fix up the tilt issue on my crt

Great video, thanks

Thankyou for this video, there aren't many i could find to explain this. I am attempting to fix/restore an arcade machine where the picture is shifted down 1/4 of the screen and tilted left. It's a really beat up machine and seems like it's been literally dropped off the back of a truck in an unloading mishap or something.

Thank you for the help

Well presented 👍🏻.

Good day Sir Thank you very much for creating these CRT videos; I have learnt a lot so far. When adjusting the yoke position while the tv is powered, what gloves should be used? Any rubber glove or is there a special requirement? I understand that the voltage on the horizontal deflection coil is quite high. Also, to correct for screen tilting, can a small rotation of the yoke cause the purity/convergence to change? Thank you very much. Regards from South Africa

5:36 That seriously startled me

Hi, I want to start off by saying I love your content!! I've learned a lot from your videos. I have a Panasonic 27" super flat, model CT-27SF35W manufactured in 1998. My image has a tilt to it and some corner convergence issues. I was told awhile back that this set has a fixed yoke so no adjustments can be made by a TV repair shop back in 2015. I was just wondering if this is true? I'm a little intimidated to try to straighten it myself, but the TV is in such nice condition I'd like to have it corrected. Any advice and information would be appreciated, thank you!!

YOU ARE GREAT!

Brilliant! It's a mess, that Germany and the states are so far away from each other. I have at least one TV here, which would be a perfect try to repair, as it seems to be related to the same issue.

just discovered your channel, great info.... do you have a video on horizontal not being centered... this tv i have is a portable 9inch ktv, there's no pot to adjust position... picture is pushed to the right

Great !

Good video! Question: What do the plastic wheel dials on the right side of the yoke you show at the 1:00 min mark do?

Great video. I'm hoping this works on mine because Degaussing wasn't the solution.

I have an arcade monitor with a broken yoke. Its just dangling there. I'm fairly new to actually working on them but I was able to temporarily hold the yoke in place with Gorilla tape. I felt like a huge wuss for ordering those same gloves, until I saw you wearing them haha. I'm not interested in getting a nice shock! I'll be wearing those to make further adjustments.

Hmm... My arcade monitor does have some solid purple in the far bottom right corner of the screen. Even when I got the monitor new I always had issues with screen geometry looking straight on one side of the screen but warped on the other. Maybe a simple Yoke adjustment will help a lot. The monitor came with no cover to begin with. Definitely picking up some antistatic gloves though.

Fixing yoke tilt is fine and quite easy to do but how do we reseat a yoke properly so that convergence and geometry is equal across the screen? Just adjusting the tilt can cause these problems to develop too. I'm using spirit levels and all sorts to try to get it right and there is always a new problem somwhere on the screen even when I think I have got it right. I'd like to come across a more solid solution to yoke sag instead of the Y ring magnets as that acts more like a bandaid.

Thank you I just picked up a monitor and screen was crooked just have to adjust the yoke

Great vid!btw,can you tell me how to fix my CRT TV screen stop moving on video mode?even when entering the menu it appears like moving (not instantly like it's meant to be) and when playing games (PlayStation or PlayStation 2) when the screen transitions or changes (when it goes black and another one comes up,for example) it fades away or appear very slowly and moves towards the screen like in a 3D effect,it never stands fixed when there any kind of movement on screen and it's like autofixing itself depending on what's on screen.It's very odd,I can't give any more details about it.It all started when I gave the TV to some "service" just for them to center the screen (horizontally and vertically),now I have a useless TV...any kind of information about this is mostly appreciated!

Thanks my tv has this problem

I'm pretty sure I need to push my yoke a little forward, as I have some purity issues to work out. However, even when loosening the yoke screw (this is a PVM-8045q), the yoke won't budge! Any tips on getting it loose enough so that I can move it?

This is good, can you do the exact same process with a watchman?

Hi the convergence magnets are usually marked on the fingers, P = purity, 4 = 4 pole magnet for red/blue convergence, 6 = 6 pole magnet for green/magenta convergence, The enameled wire you can see on the outside is for the vertical scan and as such is generally low voltage so even if the enamel is nicked will not pose a shock hazard. Please be careful of the red/blue lead terminations they will make you jump, usually not a terminal shock hazard but if your heart is not up to scratch or you have a pacemaker I can not say for sure. Where the rubber bumpers are you can see some light coloured strips that are stuck to the CRT these are magnets stuck on the end of a strip of card/plastic and are to micro adjust the convergence in the corners.

I have a Sony Trinitron 1370R, its slightly tilted to the right. All I need to do is loosen the screws on the yoke, slightly turn it to the left and I should be good?

Would you recommend adjusting the yoke on a Sony Trinitron KV-36FS120? My screen tilted the other day and the tilt screen correction setting leaves black lines on the edges.

So at the 5 min mark when you fixed the color issues, you were turn and pushing the yoke towards the front of the tube with that movement?

Not sure where to ask this, but would you happen to know what to do about a horizontal deflection cord that should be reading at .5 ohms but is reading between .2~.4 ohms instead? I made a thread in an arcade forum trying to troubleshoot problems with a chassis not staying on and arrived at the point where this might be the reason (stays on with the horizontal cord and vertical cord unplugged. The vertical is reading correctly between 6~7 ohms though), but I'm kind of stuck here.

should I do this to counter the earths magnetic tilt? I moved houses and where the crt is now its tilted and is perfect if I spin the crt to north but I cant have the tv stay that direciton to use

I have a toshiba 32 inch crt with overly green tinge to colour, does it need a re cap, or yolk adjustment?

Can someone explain to me what the transparent wheels in the white casing on the side of the yoke are for?

What gloves are those? Ive been nervous to adjust the yoke with just hand but don't want to buy class 3 (30,000) gloves.

Something I've always wondered about is: can you adjust picture size (overscan) using the yoke by moving it? Reason being, I noticed on many if not all cheap modern CRT TVs there is no way of adjusting H-Size in the service menu (only V-Size), just the higher end sets seem to have a H-Size option for whatever reason, and there are no pots on the chassis either. But there must be some way to adjust it, so the yoke comes to my mind.

Hi sir hru. I am fitting a new motherboard in my BPL crt tv today all things are good but main problem is right to left screen are cutting no priset in board for adjustmet so what to do Plz reply sir

Hello! Does anybody has an idea how this works with a B&O MX4000? I could get it to look good but it always goes back to it's crooked position. There aren't much Infos out there and at first I thought the problem are the wedges. But i was reading on a forum, that the yoke and the tube are one unit on these and you can't adjust the yoke at all. Is that true?

How can you get that screen you used for the adjustments? I have seen it before but don't know what it is called or how to get it. Great video btw.

Hi, I changed the yoke and my red and blue grisd are smaller than the green. Any tips on how to fix that?

Thanks. I just fixed my badly tilted TV with this vid (and the CRT safety one). I just wonder how to fix Horizontal linearity as 240p Sonic stage looks bad.

Can a Yoke adjustment fix a screen warping issue on say a Sony Trinitron?

Hey how do I fix the lines in this i have straight up and down lines

Yolk can also fix a minor keystone issue?

What rating are those electrical gloves?

How did you fix that white line on the top of the screen?

My CRT image is perfectly parallel on top, but the bottom is excessively curved towards the top. Can that be corrected ?

Love you're channel wish I could contribute

Is there a way to perform that kind of repair on a Bang&Olufsen TV? The picture on mine is tilted a few degrees clockwise. I called a TV technician today and told her about the problem and the possible fix, she said that yoke and tube are one unit on B&O TVs which makes the yoke unadjustable. Is that true?

how to adjust overscan plz

Should I reset to factory default in the service mode before making physical adjustments like this?

I've got a large Panasonic consumer CRT from the late 90's. The picture doesn't make it all the way to the horizontal edges of the screen. (Vertical is fine). I have found a pot inside that controls horizontal size, but even with it maxed out it still doesn't reach the edges (and overscan is visible). Can this be corrected with some kind of yoke adjustment?

what if the picture is off to one side instead of being tilted?

Is that glove class 2 or 3?

how to adjust if there are no such gloves?

I wish you showed where you grabbed it to turn it when it was on :/

Hey, I've a Commodore 1701 monitor and it's a kinda cool monitor, everything works well about it, the only problem is the image a bit tilted. After viewing this video, it's clear the yoke probably moved a bit in it's life. It doesn't seems hard to fix it, the only thing is i'm very afraid to received an electric shock. I checked your channel to find some safety tutorials but i didn't find any :/. Do you have some easy to follow tutorials I could watch or read :) ? As i'm a totally new to this, working on it while plugged seems very dangerous for me, if I let it unplugged for a week will it be totally safe to try moving the yoke ? Your content is very cool and helpful anyways, thanks for that ! EDIT : I just foud your video that explain how to do it : kzfaq.info/get/bejne/mpedhNihtq6qm5c.html. I'm still affraid with the discharging step though.

oh that's what its called lol.

Aha then my yoke must be tilted cause i have the exact same issue that you show in the video,the upper part sinks in the right side....

I bought a Phillips CRT, it was working fine in the shop. But the moment I set it up in my room, the screen is tilting. I swear I'm cursed.

Presumably also a metal wrist strap at wrist not sleeve of person is protection against the power should it suddenly try to go to said person the power should go to that hand then strap an not the heart... also the other hand without strap presumably would be always behind back... to avoid touching anything inadvertently idk... just assuming don't actually listen to this I've never serviced a tv just studied the,.. lol

I tried that and i got an electric shock.

Old days back......

The best fucking crt tutorial, I've seen many of them and no one explains in that way like this guy does, keep it up bro