how to fix the most common candle making issues ❌

Рет қаралды 69,460

4 жыл бұрын

#candles #candlemaking #candle #diycandles #candlebusiness
In this video, learn how to fix the 10 most common candle making issues in a snap. We'll give you simple solutions to fix all of the issues that come up when making candles at home including:
candle sweating
candle jump lines
tunneling
when your candle won't light
frosting (aka wet spots)
modeling (a snowflake appearance)
sink holes
poor glass adhesion
poor hot or cold throw
smoking
shop luxury candle making tools & supplies.
bit.ly/3NfR9qF
about us.
makesy.com/
Makesy is your one-stop shop for all things DIY! Learn how to make candles, soap, bath & body, skincare, hair care, fragrance, home cleaning & more. Shop top-of-the-line, ethically sourced making supplies that are good for you & for the planet! Whether you're crafting for fun or running a small business, we're here to guide you with the supplies you need, helpful how-to videos, and creative recipes! 🌈
make it happen with makesy.
💐 luxe fragrance oils: bit.ly/3D4czm5
🕯️ natural wax blends: bit.ly/36AMTkR
🏺 unique candle vessels: bit.ly/3ivsQao
🧼 natural soap supplies: bit.ly/3tyyAGp
💦 room & body spray supplies: bit.ly/3tAyhe8
🚰 green home cleaning supplies: bit.ly/36J5uuU
🌱 100% natural essential oils: bit.ly/3D78tK7
🚿 bath + body supplies: bit.ly/3D5cxu8
🌟 effortless, all-In-one DIY kits: bit.ly/36Cck5A
curated for you.
making sure your candle wick is the right size: bit.ly/3wwZEb5
follow us on social.
📸 instagram: / makesyoffic. .
🤳 facebook: / makesyofficial
📽️ tiktok: / makesyofficial
🖥️ pinterest: / makesyofficial
💬 twitter: / makesyofficial
🤍 linkedin: / makesy-official

Пікірлер: 158

@amisha9468 3 жыл бұрын

thank you so much. This was extremely helpful and solved most of my problems in candlemaking! Kudos to you guys!

@makesyofficial 3 жыл бұрын

Glad it helped!

@bushramemon768 2 жыл бұрын

Btw this video and the tips you have given are seem to be life changing will definitely gonna try

@DJR30645 2 жыл бұрын

thank you!! I am new to candle making and =has glass separation in my test candle. now i know how to fix it

@amandalouise3020 3 жыл бұрын

This is so helpful! Thank you :)

@makesyofficial 3 жыл бұрын

Glad it was helpful!

@marisajames8158 3 жыл бұрын

Thank you!

@AXMANXDA4554 4 жыл бұрын

I’m having the biggest problem with tunneling and I’ve tried so many different wicks with my jar maybe I should try to double my wicks?

@mannywrobel6197 3 жыл бұрын

Do you have any info or point me in the right direction about how to create a "patina" or "aged" effect on wax candles?? Love your tips and tricks. Very helpful.

@alissiaadorni9669 4 жыл бұрын

I had a question about your wick and wax. I was wondering If the wax that you sell I could use a different type of wick for the wax instead of the wooden stick and if if still will have a great hot and cold throw.

@gerardokaypee 4 ай бұрын

Hi! Thank you for this solutions to every beginner candlemakers like me! I love how straight to the problem and solution this video is! Very helpful! Thank you so much! Subscribing from the Philippines! ❤❤❤

@minashah9933 3 жыл бұрын

what is the difference between wick width and thickness? Is width the length of the wick you have before you burn it? (i.e. if I usually trim to 1/4 inch, then leave more than 1/4 to resolve tunnelling?

@lisawalker7923 3 жыл бұрын

Awesome info

@makesyofficial 3 жыл бұрын

Glad you liked it!

@evandria 3 жыл бұрын

Hi, I just started making my own candles, but they won't burn nicely. The flame keeps flickering even though there is no draft or other air currents around the candle. I'm not sure what is causing it or how to fix this.

@jya811 3 жыл бұрын

To avoid sinkholes, what temperature should I be pouring the wax? My room temperature is around 72 degrees.

@ArtistRebeccaLS 3 жыл бұрын

Just wondering Charlotte - why would a candle stick collapse while burning - for example - not a container candle but a mould that’s been used to create a stick or something but when burning it the candle just collapses leaving wax puddle in dish as in more wax in dish than what’s burning……

@Cricelia 3 жыл бұрын

Best video

@thrivinglightworkerbrittne9539 3 жыл бұрын

I made the mistake of putting too small of wicks in tea light candles. How would I go about remelting them all and starting over with new wicks but use the same wax?

@Gioinsel 3 жыл бұрын

Hello, I appreciate your help. I'd like to ask one thing, I started to make candles with palm wax and it's realy hard and had cracks. I also used cajeput oil. Do you recommend me to use stearic acid? I'd be happy if you answer this. Greetings from Portugal.

@makesyofficial 3 жыл бұрын

Hi there! Stearic acid is also very hard so this may not help. Crackling is common with palm since it is a hard, natural wax. You also want to be careful adding your own oils to the wax since they are not hydrogenated and can go bad (normally in about 12 months). Do you have access to any coconut, soy, or rapeseed wax in your area? This would help soften up your blend. You can also check out our waxes which we ship internationally.

@Gioinsel 3 жыл бұрын

@@makesyofficial Hi again. Thanks for the answer. I'll pay attention your advices. Yes' I also found biologic soy, rice, and coconut wax here in Portugal and also in Spain. I found parafine oil. But I have no idea how to use.

@sonicamy4518 3 жыл бұрын

When I first started making candles, I had a huge problem with color! It was mostly keeping inaccurate records. I wouldn't keep track of how much colorant I used therefore couldn't recreate colors. Number two my wick wouldn't work properly. I was using to much color! For a long time I was frustrated and started keeping accurate records and changed to pastel colors and solved most if not all my issues. Occasionally I want a deeper color so in those cases I'll wick up to start with and that seems to help.

@the1andonlytrav 3 жыл бұрын

The issue I'm having is that there are little specks of colorant at the bottom of my candles and wax melts. I heat the wax to the right temperature, I add the colorant and fragrance oil at the right temperature and I pour at the right temperature. I triple check I'm not adding too much fragrance oil too. I think it may be the fragrance oil attaching to the colorant and then it cooling too quickly. Thoughts?

@chinaskisable 3 жыл бұрын

Hello travis, can you point me in the direction to solve this problems, i wanna help my wife with this same problem, we also take it out broken most of the time, do you think it could be a wick too big? I notice the cracks always follow the wick, thanks

@thatlupechick5925 3 жыл бұрын

when you say smoking does that mean during the candle is lit or after you blow it out? i notice my candle lets out a decent amount of smoke when i blow it out, but it also leave some black residue around the rim of my jar... any tips?

@makesyofficial 3 жыл бұрын

The smoking we are referring to is when the candle is actually burning! If you have some black residue, you may want to test 1 wick size down!

@narnia371 3 жыл бұрын

Any suggestions for tunnelling for soy wax making ? Any tips ? I hate seeing this and especially not be burned equally as it continues... :/ Thanks in advance

@johnreynolds7884 4 жыл бұрын

wick from the wick selection said i needed a .02 x .625 for a vessel with a inside diameter 3.05 in. having problem with getting a full melt pool vessel height just under 4 in wick height 3 don't know if i should to .03 thickness or go with a .02 x .75 THX

@makesyofficial 4 жыл бұрын

For the melt pool, I recommend going up in width so burn testing with the .02 x. 75" :)

@orianaantia3440 4 жыл бұрын

This was great, thanks, I been tryin to find out about "soy wax candle making supplies" for a while now, and I think this has helped. Have you heard people talk about - Peyaniel Psychological Predominance - (Have a quick look on google cant remember the place now ) ? It is a good exclusive guide for discovering the trick to be a candle maker for profit without the hard work. Ive heard some great things about it and my friend got amazing results with it.

@sonicamy4518 3 жыл бұрын

@@orianaantia3440 then why aren't you using it. Oh, I've seen your name before. Quit running your scam. It is a money hole, sceme!

@chinaskisable 3 жыл бұрын

@@sonicamy4518 lol i noticed too. Report for scam please!

@cecyredding6814 10 ай бұрын

I just bought a kit to practice from candle science i use the microwave method first n then the double boiler with the right temp but looks cloudy/ bumpy on top?

@makesyofficial 9 ай бұрын

Interesting. We recommend reaching out to candle science for more information about that.

@kenycewescott1295 2 жыл бұрын

Hi!! I got excited and forgot to cure my candles and it now has tunneled. How could I fix this? Should I let it cure? Will my candle still have a scent? Should I melt the top of the candle to create a smooth finish?

@makesyofficial Жыл бұрын

The tunneling is not related to the cure time but is related to the wick size. The tunneling will also not effect the scent! To help smooth the top again you can heat gun the top however we recommend moving up wick sizes in width to alleviate the tunneling!

@teacherkaroldomingues5895 4 жыл бұрын

Hello, I have a question! My candles keep cracking ... Is it maybe because of the temperature of the glass ??? Also what would be the perfect temperature to pour it ?

@sonicamy4518 3 жыл бұрын

It depends on your wax. What are you using?

@teacherkaroldomingues5895 3 жыл бұрын

@@sonicamy4518 I'm using soy wax

@chinaskisable 3 жыл бұрын

@@sonicamy4518 high fusion soy wax (flakes), ;(

@lavonnacox6764 3 жыл бұрын

Are use soy wax and mostly regular wicks. Lately I’ve been having trouble with once the wax has melted all the way across the container it will cover my wick and the fire will go out. What causes this

@makesyofficial 3 жыл бұрын

OK contrary to my last comment to you, I am now thinking it could be that the wick is TOO short if it is getting drowned out!

@marianagarza3866 3 жыл бұрын

I’ve just started marking scented candles at home. I made 5 small candles in 1 oz glass containers. I cannot smell the candles when lit. I poured 8% fragrance oil into my soy wax. Aside from I creasing my fragrance oil percentage, any other suggestions?

@marshartsy2964 Жыл бұрын

Hey did you get any solution?? I'm facing the same problem

@aboabdalazizelminyawi7689 3 жыл бұрын

Hi, I have an issue when I'm using multiple levels of different colors. Each Time I'm willing to add a level the wax keep showing scratchs.

@chinaskisable 3 жыл бұрын

Cant you fix them with a heat gun?

@SSSSSSSS568 2 жыл бұрын

Hi, I have frosting problem when I use colors for my candles. I was wondering if you could help me to fix this problem.

@makesyofficial 2 жыл бұрын

Hi there! Please reach out to us at the below link with photos. Please include the type of wax you're using, percentage of FO, diameter of your vessel, and wick size. woodenwick.com/pages/contact-us

@paulbalogh4582 Жыл бұрын

Alright, I suspected my wick to vessel ratio wasn’t right as mine are smoking like koorazy AND they are trimmed very tight to the wax line. I’m making Crisco candles. Trying various wick types to find what works best. Total crap shoot at this point but thanks for the tips.

@makesyofficial Жыл бұрын

Ah yes! Crisco and other fats will burn super quickly and super hot so you really don't need much wood material to get a good burn. We would recommend a single ply wooden wick or a cotton wick. You'll find the right one! It may just take you a bit more testing than you might have expected.

@sacrednorthsoapco.1084 3 жыл бұрын

What does it mean if your wick has a ball at the tip after burning and extinguishing?

@makesyofficial 3 жыл бұрын

Hi there! CARBON BUILD-UP (also known as Mushrooming) Is exactly that, the glop of carbon build-up on a wick.This happens with the candle is unable to burn fast enough to keep up with your chosen wick. Typically a wick that is too big causes more wax to be sent to the flame than it can handle.

@laurenanderson2459 3 жыл бұрын

I keep getting air bubbles on my torso moulds, and after a first use of a silicone mould tbey ain’t shiny anymore? Any tips?

@chinaskisable 3 жыл бұрын

My girl says its because u have to super clean the silicone m. before use it again, because wax stay on the walls and does this. Good luck!

@girlierobs 4 жыл бұрын

When should we fix this problem? Before or after cure?

@mariabeatriz212 3 жыл бұрын

Cheers for this, I been tryin to find out about "wholesale soy candle making supplies" for a while now, and I think this has helped. You ever tried - Peyaniel Psychological Predominance - (do a google search ) ? It is a good exclusive product for discovering the trick to be a candle maker for profit minus the hard work. Ive heard some pretty good things about it and my neighbour got cool results with it.

@blancarmo 3 жыл бұрын

My main problem is color... I'm doing candles with silicone molds and using powder color and it leaves a white powder-like residue I cannot avoid. Any tips on that? Maybe using liquid colours? Thx!

@chinaskisable 3 жыл бұрын

Got the same problem! We bought liquid ones. I’ll report back when theyre home.

@laiz3507 4 жыл бұрын

How to make candke more white and opaque

@jakehobbs Жыл бұрын

What about when you pour the fragrance oil in the candle wax once the wax dries all of the oil is at the very bottom of the candle like it didn’t even absorb or mix with the wax at all?

@makesyofficial Жыл бұрын

This means that your mix and pour temp may have been off or you didn't mix long enough! Or you could have used too much fragrance for your wax type. We recommend a 8-12% fragrance load for most wax types but always check your wax to find our the fragrance load. Ensure you're mixing for at least 2 minutes and pouring at the appropriate mix and pour temps. You can remelt this candle in a double boiler and try re-mixing the wax and fragrance!

@samanthakenny1295 4 ай бұрын

Big funnel shaped dip in the center around the wick when dried?

@makesyofficial 3 ай бұрын

It sounds like you have a sink hole! Hold a heat gun (a hair dryer also works) over the top of your candle to melt the surface. As the wax starts to melt, poke at the sinkhole with a chopstick (or a similarly shaped object) to determine the size of your sinkhole. Sometimes, what looks like a tiny hole can actually be a lot bigger under the surface. Puncture the wax to allow melted wax to fill the open cavity. Once the cavity is filled and the surface of the candle wax is nice and flat again, allow your candle to cool back down to room temperature.

@anakhapsureesh1265 2 ай бұрын

My candles easily detach from the container and idk why does it happen... so can you suggest some of the steps that I should follow to avoid the above

@makesyofficial 2 ай бұрын

Try pre-heating your vessel slightly & pouring at a lower temperature. That should do the trick!

@sameendrapmanoj3162 3 жыл бұрын

I have a question about paraffin wax candles. It shows many white spots after cooling. Any idea about that?

@makesyofficial Жыл бұрын

That is called frosting! We recommend checking out our video here: kzfaq.info/get/bejne/jNihbKyD3qqUpHk.html

@kathi-annwright7775 4 жыл бұрын

Everytime I heat my glass before pouring the wax,my candles are all cracked. I've tried so many things to get a smooth candles , but no luck. I'm tempted to give up on this soy wax :((

@sonicamy4518 3 жыл бұрын

Don't give up! Just start with lowering your pour temp. and only warm your jars slight ly with a heat gun before you pour. Then go up or down slightly if it isn't quite right. Be patient you will get it!

@markspancing9343 3 жыл бұрын

Cheers for this, I have been researching "easy candle making for beginners" for a while now, and I think this has helped. Have you heard people talk about - Peyaniel Psychological Predominance - (Have a quick look on google cant remember the place now ) ? It is a smashing one off guide for discovering the trick to be a candle maker for profit without the hard work. Ive heard some pretty good things about it and my co-worker got amazing success with it.

@chinaskisable 3 жыл бұрын

Cera de soya de alta fusión. Es lo que necesitas, check it out.

@Siddharth_dif_n_dif_Co.427 3 жыл бұрын

Try using by the honour of grayskull I am shiva. Hallelujah

@tonsmthomas 4 жыл бұрын

Jump lines, finding it difficult to sort this one !!

@sonicamy4518 3 жыл бұрын

This is when you can actually see lines going up the jar. Usually when you pour at to low a temp. and pour to slow.

@tonsmthomas 3 жыл бұрын

@@sonicamy4518 okay. Thank you. It's not coming now.

@mariadidthat Жыл бұрын

I can't believe I'm just seeing this video. I often have the wax pull away from the inside of cement vessels and just recently the wax pulled away on some ceramic vessels. It's never happened with the makesy Aura vessels - is it the material or is the temperature too hot or too cold? I'm confused now. I use the makesy wooden wicks and the makesy virgin coconut soy wax.

@makesyofficial Жыл бұрын

Great question! If the wax is pulling away it's cooling too fast - so likely you're pouring at too cool a temperature and your vessels are super cold. We'd recommend making sure your ambient room temp is at least 60 F and you can try gently passing over the vessels with a heat gun prior to pouring. Cement specifically holds the cold so those may be a little harder.

@mariadidthat Жыл бұрын

@@makesyofficial thank you!!!

@7s345 4 жыл бұрын

Yes Soy wax is so temperamental and I'm trying to avoid anything Paraffin.

@marioperez6466 4 жыл бұрын

Cheers for this, I been tryin to find out about "how to make candles with soy wax flakes" for a while now, and I think this has helped. Have you heard people talk about - Cenadoelyn Candle Contemplation - (Have a quick look on google cant remember the place now ) ? Ive heard some pretty good things about it and my buddy got excellent results with it.

@cy4277 3 жыл бұрын

Use beeswax

@jasz28 3 жыл бұрын

@@cy4277 is beeswax easier to handle with silicone molds??

@tonys490 3 жыл бұрын

can you do a more detailed video how to avoid these ? thanks

@makesyofficial 3 жыл бұрын

Thanks for the feedback!

@jasz28 3 жыл бұрын

I use silicone molds with soy wax but it is frosting when I unmold it. How do I fix it?? What temperature should I pour? Help 😭

@makesyofficial 3 жыл бұрын

Soy is notorious for frosting but it typically does better pouring at lower temperatures (try 140F)!

@jnn4853 2 жыл бұрын

Does anyone know how you can prevent a wax dripping mess when burning pillar candles? Do i make them with smaller wicks maybe? Or is it normal with these types of candles?

@makesyofficial 2 жыл бұрын

It's fairly normal for some drippage on pillar candles. However, by using a smaller wick you can avoid them from melting too quickly into a puddle!

@Rosie78368 3 ай бұрын

New to candle making - using 100% soy wax - have wavy lines across the surface of my candles and hairline/very small crack next to wick. Is this due to pouring at too high a temperature? Should I have heated the jars first?

@makesyofficial 3 ай бұрын

That's a common characteristic of 100% soy wax! If you run a heat gun over the top of the candle it should fix the cracks and waviness!

@Rosie78368 3 ай бұрын

@@makesyofficial thanks!

@alexneel4686 2 жыл бұрын

What does it mean when after your candles has dried an the wax has a white ring around the outer edge of the candle darker then the center ?? I'm using soy wax

@makesyofficial 2 жыл бұрын

It's likely fragrance oil that was not mixed properly. Make sure you are mixing your melted wax and fragrance for at least 2 minutes to ensure the molecules have combined.

@danielafilipadasilvafonsec1428 Жыл бұрын

Hi does anyone know why do I keep getting air micro bubbles trapped into my candle? I don’t overmix the fragrance. Do you have any suggestions? I work with soy wax

@makesyofficial Жыл бұрын

Hi Daniela! Micro bubbles usually are a result of temperature. You can try lowering your mix and pour temp or gently tapping your pouring pitcher on a flat surface before pouring your candle.

@latestwhatsappstatus6951 3 жыл бұрын

Mam.im.having a problem.that my candles having white Paches after setting, can u plz help me why it happen

@makesyofficial 3 жыл бұрын

Hi there! This is called Frosting. If this happens we suggest using a soy wax blend or pour the wax at the coolest temperature possible.

@unapiel Жыл бұрын

how do I fix a dipped long candle popping and crackling?

@makesyofficial Жыл бұрын

What wax blend and FO load did you use? And white size / type of wick?

@sheilahatton4684 3 жыл бұрын

My candles i make the wick wont burn and it makes a pool in the middle then goes out what am I doing wrong?

@makesyofficial 3 жыл бұрын

Hi there! It sounds like you're experiencing some tunneling here. This typically happens if the wick is too small. Check out our wick calculator for some suggestions on what size wick to use for your vessel. woodenwick.com/pages/wick-selection-guide

@transformers1017 4 жыл бұрын

Hey, could you help me out, I am a newbie of making candles (never made them) I recently bought a candle making kit from a company called Legacy Naturals Candle Making Kit off of amazon,,,,, i made 2 candles (was so excited) First time I made 2 candles, I cut the wicks, I then lit them and they went out and I said OK I will remelt these again, so I remelt them, I didn't cut the wicks this time, I lit both of them (not at the same time) both of the wicks went down really really fast,,, one of them was lighting fine but it was making a tunnel and the other candle was making a tunnel and then went out on its own,,,,,can you help me please? I was saying to myself,,, they gave the wrong size wicks in this kit. If you want, you can have a look on KZfaq for that kit, it's one for 37.50

@babygunz0604 4 жыл бұрын

Change your wick to a size or two. Tunneling and wicks going out is a sign that your wicks are too small

@transformers1017 4 жыл бұрын

@@babygunz0604 OK thank you,,,, the wicks that came with that kit was the only one I tried with that colour candle but since I got more wicks, I will try the newer wicks but I don't know if its the mica powder itself though.

@stillkickin9957 4 жыл бұрын

Micas can clog wics

@transformers1017 4 жыл бұрын

@@stillkickin9957 thanks,, i ordered dye flakes, so hopefully that will be good.

@bushramemon768 2 жыл бұрын

I got cracked surface and the wax around wick has just turned upward and make a very tiny cracky whole thing underneath

@makesyofficial 2 жыл бұрын

Try using a heat gun to smooth it out :)

@bushramemon768 2 жыл бұрын

@@makesyofficial thankful.... Surely will try ❤️

@tilekopanos3386 2 жыл бұрын

I just started making candles and I'm doing something wrong but I don't know what is it.I make candles in silicone molds.So the problem is that,I make a candle but when I take it off the mold,I see some white areas in the candle(making it look kinda old) sorry if I'm not expailing it well I'm just wondering why it's happening

@makesyofficial 2 жыл бұрын

HI there! This usually happens if the wax has a high oil content or there was too much fragrance oil added.

@tilekopanos3386 2 жыл бұрын

@@makesyofficial I'll try putting less fragrance,is there something specific, like for example 2-3 drops or 4-5

@MsParris21 2 жыл бұрын

Can any help me figure out why some of the soy wax candles go up in flames out of a few hundred I would say maybe 15 of them did it,but I’m not sure why!!

@makesyofficial 2 жыл бұрын

Hmm, it could likely be due to the incorrect wick size or the fragrance not being mixed properly. If you reach out to our CX team they can help you troubleshoot! woodenwick.com/pages/contact-us

@designfluencer7710 4 жыл бұрын

100% soy wax, mine are smooth but after burn they solidify very ugly, whitish and full of bubbles is this normal? thank you

@mariafernandagarciabermude3279 3 жыл бұрын

It happens to me but not just after burning it. It has happened to me many times when Im trying to do a candle and Im getting mad :(

@chinaskisable 3 жыл бұрын

@@mariafernandagarciabermude3279 hola mary jajaja ayuda, como lo resolviste? A mi aun me salen de repente como con polvo blanco, es cera de alta fusion de soya, segun eso compré o luego se nos rompe muy fácilmente, crees que sea por el pabilo? Muy ancho?

@mariafernandagarciabermude3279 3 жыл бұрын

@@chinaskisable no supe resolverlo jaja creo que mejor después compraré algún otro tipo de cera

@doyenne3749 4 жыл бұрын

My candles keep breaking every time I take them out the mold. Could someone please help on how I can stop this from happening

@frenlyneybur7544 4 жыл бұрын

I think that's because the wax has hardened but it hasn't shrunk. I think we need a wax that shrinks if we want to use molds Don't take my word for it though, I'm very new to candle making...

@nokusunduza7307 4 жыл бұрын

Hi hope you still need an answer to this, wait 4-5 hours until you remove them from the mold x

@jasz28 3 жыл бұрын

@@nokusunduza7307hi I use silicone molds with soy wax but it is frosting when I unmold it. How do I fix it?? What temperature should I pour? Help 😭

@chinaskisable 3 жыл бұрын

@@jasz28 did you manage to fix it? Im stuck at this also.

@anacristinatownsend2232 2 жыл бұрын

My biggest trouble is my candles keep sinking after cooling. Is this because of the temperature I’m pouring them at??

@makesyofficial 2 жыл бұрын

Sinkholes can occur with any wax type, however they are most common with soy waxes. You can easily fix them by going over the candle with a heat gun!

@retinabrown5605 2 жыл бұрын

I have a problem with my flame flickering

@makesyofficial 2 жыл бұрын

Hey Retina! Please reach out to our CX team here makesy.com/pages/contact-makesy

@yeseniaespinosa4539 Жыл бұрын

Hi, I'm starving on my candle business. And i have paraffin wax, sent to me instead of soy wax, either way, I'm getting white spots once it gets hard. What an I doing wrong putting at 180

@makesyofficial Жыл бұрын

Paraffin has a much different melt point than soy wax so make sure you reference the optimal mix and pour temp for your specific type.

@shareindiacareindia1875 3 жыл бұрын

Major issue i face is modeling to many snowflakes in my candles

@user-bj8jk5vi3j 3 жыл бұрын

So how did you fixed it?

@niveshzambaulikar449 Жыл бұрын

I have air pocket trapped inside the pillar candle !!

@makesyofficial Жыл бұрын

Oh no! This can happen when pouring too cool. It's difficult to fix pillars once they are already made so we recommend melting it down and re-pouring at a higher temp!

@aprilramdeen717 2 жыл бұрын

Does anyone know how to fix a loose tin lid

@makesyofficial Жыл бұрын

If you are having any trouble with lids from our tins please contact our customer service team at hello@makesy.com and we're happy to replace it for you!

@jbaexo5363 2 жыл бұрын

My woodwicks aren't crackling and I have yet to find an answer

@makesyofficial 2 жыл бұрын

Please head over to our live chat or customer service form to get technical assistance :)

@eckstacy Жыл бұрын

How about candle curdling? 😢

@makesyofficial Жыл бұрын

Are you saying your wax is getting chunky? what kind of wax are you using?

@jadestar1580 4 жыл бұрын

Sounds like soy wax has the most problems. What is the best wax to avoid all these problems? Thank you for the video.

@makesyofficial 4 жыл бұрын

HI Jade, any blended wax (e.g. Soy Coconut Blend) will avoid most of the common wax problems!

@jasz28 3 жыл бұрын

@@makesyofficial where do i buy that soy blend??

@mgabriel685 3 жыл бұрын

@@makesyofficialhello i made a mistake i colored my candle red but i really needed to be purple what do i do

@makesyofficial 3 жыл бұрын

@@mgabriel685 Hi Maria! You could melt it in a pot of simmering water and add some blue dye to make it purple. :)

@mgabriel685 3 жыл бұрын

Yes thank you

@Lilyandmoomin 3 жыл бұрын

This would have been much better if the candles where coloured at least we could have seen what many of the problems look like. Rather than guessing it's the same problem I think I'm getting .....

@TheLecia007 2 жыл бұрын

Hello My wick sometimes tips over

@makesyofficial 2 жыл бұрын

Hello! To fix this we suggest utilizing a wick sticker under your clip to keep everything in place ;)

@TheLecia007 2 жыл бұрын

@@makesyofficial I do. The wick is still stuck to the sticker but the sticker and wick comes unstuck from my container Thank you for replying

@jizankhan4710 3 жыл бұрын

@brianjamesontarot Жыл бұрын

I always get holes where my wick is when making beeswax candles. It drives me crazy.

@makesyofficial Жыл бұрын

This is likely due to the wax cooling too fast :) try pouring at a lower temp and keeping the ambient room temp consistent if you're not already!

@lisabeyer4712 3 жыл бұрын

Please don't think I'm pedantic, but I believe snowflaking is "mottling," not "modeling." (Once an editor, always an editor...) Thx for the great info!