how to fix your thermal printer skip labels(universal for all printer)

Рет қаралды 84,482

3 жыл бұрын

skip label usually have 2 reasons, one is your setting dafault size does not match to your paper size; other is your machine sensor is break.
In this video, I only talk about the first situation(paper mismatch)
And this is uniserval for all thermal label printer, including: Ziccga, Rollo, Arkscan, Brother, Zebra, Tsc, Dymo.....
Here is other blogger turorial： • How to Fix Thermal Shi...
Printer is the result of computer outputs, it cannot do any change to results, all is decided by software and hardware.
buy it on Amazon:
Smallest label printer: www.amazon.com/Printer-DL-770...
Most Stable label printer: www.amazon.com/Shi

Пікірлер: 121

@SkippsPB 3 жыл бұрын

Thank You so much! I’ve been trying everything to fix this issue for months now before finding this video and now my printer finally works like it used to!

@ziccga9453 3 жыл бұрын

you are welcome,I also made others thermal printer issue video in my hompage, when you get in new problem those might be helpful. Also, you can contact me if you cannot fix the problem(any brand is ok)

@kikifromcali Жыл бұрын

After tons of wasted labels, you have solved my problem! and I THANK YOU!

@ziccga9453 Жыл бұрын

welcome

@lrachel2007 Жыл бұрын

Thank you so much for your help. no more skip label on my zebra label printer. didn't know about until saw your video.

@KellyWalkerAuthor 3 жыл бұрын

THANK YOU! This solved my problem when nothing else did.

@ziccga9453 3 жыл бұрын

inspired！

@carlca 2 жыл бұрын

Hi! Thank you for explaining that "4x6" labels are often really 100x150 labels not 101x152 ... those few extra millimeters cause the double label feed problem! So solution is to set paper to 100x150 not set to 4x6 ... THANK YOU!

@ziccga9453 2 жыл бұрын

my honnor, wish you can buy my printer next time

@anthony-lz3vr 2 жыл бұрын

Thank you for this. This video is a label saver 😆

@ziccga9453 2 жыл бұрын

happy to see you get some inspiration form this poor made video

@dudeabides671 Жыл бұрын

This was the fix!!! Thank you for the 100x150mm explanation.

@ziccga9453 Жыл бұрын

welcome

@charliedee2271 2 жыл бұрын

This guy is so good at explaining

@ziccga9453 2 жыл бұрын

many too wordy and not so clear, grateful for your encouragements 😁

@stinkbugdesigns Жыл бұрын

Thank you! I was going to order a new printer today but I’m going to try this now. ❤

@ziccga9453 Жыл бұрын

try it, or ask me for help

@RestoreJe 3 жыл бұрын

Bro, you are a life saver. I've been facing this problem for months, never come across your video. Yet, today my problem solved! God bless you bro 😉

@ziccga9453 3 жыл бұрын

appreciate your rewards

@ConsciousBiteQuest 3 жыл бұрын

You are genious!!!!, You saved my day!!!, Thank you so much!!!!

@ziccga9453 3 жыл бұрын

thanks, that's my pleasure! do you use my DL-770D thermal printer?

@insyncclothing9248 3 жыл бұрын

You are Awesome bro,,, Solved my Major Issue...

@ziccga9453 3 жыл бұрын

thats cool, maybe next time you need a new printer, you could pick up one of my product, www.amazon.com/stores/node/21560793011?_encoding=UTF8&field-lbr_brands_browse-bin=Ziccga&ref_=bl_dp_s_web_21560793011

@markanderson1402 3 жыл бұрын

Dude! That totally worked for mine. Thanks for the great advice! I guess I bought some cheap chinese labels that were 100x150 instead of 4x6 and had no idea.

@ziccga9453 3 жыл бұрын

oh, that's awsome! And i sell reall 4x6 labels i nmy store, you can click this link to find it: www.amazon.com/s?me=AIW3G1OTZTTF5&marketplaceID=ATVPDKIKX0DER

@alsan9427 8 ай бұрын

It's really help solve the problem, Thank you so much.

@ziccga9453 8 ай бұрын

my honor

@reneemazzola 8 ай бұрын

How can we find out the sizes of the other labels. I use the 3x2 and 4x2 labels and also the 2 inch round labels. Each time I print it’s putting 4 or 5 labels in between. I print from my iPhone. I’ll try and look at the size and measure the labels I have to make sure it’s the correct size. Thanks so much

@ziccga9453 8 ай бұрын

problem solved？ if yes i accpect your appreciation

@avidlearner3576 2 ай бұрын

You helped me so much! Thank you

@lur518 3 жыл бұрын

Have you ever fix any primera printer? I have primera lx500 that doesn't feed roll after an update, unload label but doesn't load, and even if I feed it manually still doesn't print. Thanks

@ziccga9453 3 жыл бұрын

sorry, didnt know ahout Primera, maybe you can ask Primera Service

@thepngstudiofiles7960 Жыл бұрын

How would this work if you are trying to print on labels that are 2"x2' circle. I have it set at 2x2 and it's skipping a label each time

@ziccga9453 Жыл бұрын

follow my video steps.

@ziccga9453 Жыл бұрын

1. setting 2x2 in printing preference

@ziccga9453 Жыл бұрын

2. measure your label size check whether it is a real 2x2 3. press button then release it when you hear 2 beeps, recalibrate it

@vipulkoshiya1802 2 жыл бұрын

Very good explanation

@ziccga9453 2 жыл бұрын

yes， but quite wordy 😂

@ziccga9453 2 жыл бұрын

thank U

@badmanurslaan 3 жыл бұрын

hi i need help. I have a beeprt ltl-241 printer . it prints and than the whole roll just prints blank sheets and doesn't stop unless I off the machine. I tried ur techniques but no help. any help would be great

@ziccga9453 3 жыл бұрын

this must be something wrong with your sensor or Driver, Mehtod 1: unisntall driver then reinstall back Method 2: check you have load paper side up, and then wipe the sensor

@TheCaliCrafter Жыл бұрын

Great video, I am unable to figure it out still though. For some reason i cannot change to cm. In the US it only has inches and It still skips and adds extra labels and turns red. I know I am close to it figuring it out, but it just won't catch! My fault for buying a 500 label roll i guess!

@ziccga9453 Жыл бұрын

hope you already fixed it out

@TheCaliCrafter Жыл бұрын

@@ziccga9453 Hi there, Nope i just ordered a smaller roll. So now I have 500 labels that don't work. It also messed up the sizing of some of my print jobs. Oh well lol.

@marcmontoya3094 19 күн бұрын

100mm x 150mm or 3.94 in x 5.91 in. THANK YOU THANK YOU THANK YOU!!!!

@Whichofthefavors 3 жыл бұрын

Hello, my shipping labels do not print clearly. They print faded. Do you know how to fix /this issue? My printer settings show the same as what you was using on your computer. Thank You.

@ziccga9453 3 жыл бұрын

Windows: kzfaq.info/get/bejne/r5d7gbKKt8-RpH0.html

@ziccga9453 3 жыл бұрын

Mac:kzfaq.info/get/bejne/rNt9Zs5ml5y7nok.html

@ziccga9453 3 жыл бұрын

those are video for you to get print clear

@Whichofthefavors 3 жыл бұрын

@@ziccga9453 Thank You for your reply. My setting was already on None by default and I increased the darkness before coming across your video but my label does not come out clear like the video 🤓.

@ziccga9453 3 жыл бұрын

@@Whichofthefavors can you sent me email and sent your label file for me? My Email: ziccgaservice@126.com

@No1Waffler 9 ай бұрын

So I should set the label print to 101.6 x 152.4? My label print 2 black for every time I print one and also my printer doesn’t print the full label, only half. Driving me insane! Help 😕

@ziccga9453 9 ай бұрын

yes

@ridemnt 3 жыл бұрын

Went through all these steps. Only difference it made was the blank label comes out then the label prints. Before it was the opposite

@ziccga9453 3 жыл бұрын

did you ever try to recalibrate label? Press button and hold 5s, then machine will move forward and back to calibrate it

@naginainternational3314 3 жыл бұрын

Hi Need Your Help Please! My PRINTER : Citizen CL-E321 Is skipping labels? I tried your settings, but it did not work for me. I shall be highly obliged if you could help.

@ziccga9453 3 жыл бұрын

hello， whats your contact number？

@badmanurslaan 3 жыл бұрын

hi can u help me please. really urgent

@lostone260 10 ай бұрын

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzfaq.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

@ziccga9453 10 ай бұрын

ahhh ask me help if you need

@lizrubio2670 3 жыл бұрын

I have a Blulory thermal Printer and I lost the usb and cd . Is there anywhere I can obtain the software for it? I need help with that. Thanks😊

@ziccga9453 2 жыл бұрын

you need to contact the seller

@davidnorton7052 3 жыл бұрын

solved the blank label problem, now printing going off the 3rd or 4th label onto the next label

@ziccga9453 3 жыл бұрын

what? sent me your video to my mailbox: edison2020@126.com I will figure it out in 24h

@ziccga9453 3 жыл бұрын

did you match your thermal paper size to your doucument's size?

@davidnorton7052 3 жыл бұрын

@@ziccga9453 4x6" 100x150mm Thermal Labels. I end printing after 2 and open then push the next back a little before printing another 2

@ziccga9453 3 жыл бұрын

@@davidnorton7052 did you ever use the " learn paper" function? Press the button for 5s and machine will calibrate the paper. Notice: 4x6 is 101.6x152.4mm, not 100x150mm

@davidnorton7052 3 жыл бұрын

@@ziccga9453 changed the length to 152.4mm - ouch, it's working YAY! thankyou so much

@obiwann785 Жыл бұрын

Thank you so much!

@ziccga9453 Жыл бұрын

my glory

@cmacrea-boutiquedeloisirsc394 Жыл бұрын

Thanks so much, why seller didn't tell that in the notice!

@ziccga9453 Жыл бұрын

maybe they think buyer will know that

@minimalist_by_force2269 Жыл бұрын

Thank you!!!!

@ziccga9453 Жыл бұрын

welcome

@VitalExistence Ай бұрын

This didn't work for me. My printer shoots out a blank label every time I turn it on

@Idontknow-fu6bg 2 жыл бұрын

hi, im using zj 9200, my printer right now just printing a blank paper..do you know how can i fix it? im using android

@ziccga9453 2 жыл бұрын

check this video toturial: kzfaq.info/get/bejne/bsygeLuLzNy3XX0.html&lc=UgxQDF_eNXEvbpuk2JZ4AaABAg

@Idontknow-fu6bg 2 жыл бұрын

@@ziccga9453 tq bro 👌, got it working again

@ziccga9453 2 жыл бұрын

@@Idontknow-fu6bg dont mention it, just Easy work

@adorableaccessories 2 жыл бұрын

Can you please show how you do this in bartender as mines skipping still

@ziccga9453 2 жыл бұрын

yes, but yuo have to email me first

@adorableaccessories 2 жыл бұрын

@@ziccga9453 I can’t see your email anywhere

@ziccga9453 2 жыл бұрын

@@adorableaccessories ziccgaservice@126.com

@lyanaidris3669 3 жыл бұрын

hi.. my thermal printer roller is not working. print label keep rejecting my printing.. how can i fix this

@ziccga9453 3 жыл бұрын

you mean the printer roller stop rotating and doesn't feed the paper?

@MysteriousTracker Жыл бұрын

@@ziccga9453 yes this is my issue, except when you feed the paper it takes it comes out the other end and then back in but then when I print anything from my computer or even a text print it won’t print at all

@ziccga9453 Жыл бұрын

@@MysteriousTracker how about now?

@smithagowda8285 Жыл бұрын

Hi I got thermal printer pdf has 3 sheets but when I give print it is printing only 1 sheet why is it

@ziccga9453 Жыл бұрын

Hello Smitha, I email you hours ago.

@ziccga9453 Жыл бұрын

1. uninstall the driver 2. reinstall the driver 3. set 4x6 into correct size 101.6x152.4mm

@jeanieyang304 3 жыл бұрын

Hello, I adjusted my printer preferences but i am still having trouble. it's still skipping labels. any idea what I am doing wrong?

@ziccga9453 3 жыл бұрын

maybe you show better create a new label fromat in printing preference, and ask seller its real size. then load paper and press the button for 5s to learn paper, before you printing, check your print detail is match to your needs

@tresmuskiterosvhenteuno9797 Жыл бұрын

What iif blank image how to fix it

@ziccga9453 Жыл бұрын

check my youtube channel, I have this tutorial

@poke_man98 11 ай бұрын

My polono keeps printing blank labels

@ziccga9453 11 ай бұрын

that is great, my video helpful?

@Benji_UFC 2 жыл бұрын

bro my printer is not printing at all. the labels arent even moving...

@ziccga9453 2 жыл бұрын

did you ever try to print test page by pressing and holding the button?

@Benji_UFC 2 жыл бұрын

@@ziccga9453 yes, I believe I got a trash printer. I am just going to order a printer that takes ink. Never messing with a thermal printer again lol

@ziccga9453 2 жыл бұрын

@@Benji_UFC ahhh you'd better try my thermal printer before you bought ink printer.

@ziccga9453 2 жыл бұрын

@@Benji_UFC what a pity

@alantan79 2 жыл бұрын

Saying its a bug without saying its a bug

@ziccga9453 2 жыл бұрын

what do you mean?😳

@JelscreationsNmore 2 жыл бұрын

Mine will print test page and that's it

@ziccga9453 2 жыл бұрын

so check your settings, must something wrong with your software

@macykober5991 2 жыл бұрын

@@ziccga9453 I have the same issue! It printed over my test label and now it won't print anything

@ziccga9453 2 жыл бұрын

@@macykober5991 uninstall the driver, then reinstall again, also, u need to see this video :

@ziccga9453 2 жыл бұрын

@@macykober5991 uninstall the driver, then reinstall again, also, u need to see this video :

@ziccga9453 2 жыл бұрын

@@macykober5991 kzfaq.info/get/bejne/bsygeLuLzNy3XX0.html

@mamabear3887 Жыл бұрын

Lots of expletives flying around today. Hudoo comp does not help. My entire shop is on hold. Like... I could fucking cry and then Hiroshima earth right now without care.

@ziccga9453 Жыл бұрын

hei, what's happening ?

@mamabear3887 Жыл бұрын

Hudoo thermal printer driver diagnostic tool will not recalibrate to print shipping labels ... Print should be in the middle. I ended up allowing it to print... Then put 2 labels together to make one label. I had to ship by 5 pm. I have call into hudoo. And they tolerate me. Im awful. But they will cure the issue. I certainly cannot do it by myself. I have worked with printers for 25 + years. I have and had 2 printing companies. . But this is ridiculous. I thought epsons were bad. Lmfao And thermal printers are not bad. Hudoo not bad. Its just the machines are too sensitive. 🙄

@ziccga9453 Жыл бұрын

@@mamabear3887 come on, choose my thermal printer, I am helpful in 7/24