such an EZ process anyone can do just make sure you get the ECU file over to them ASAP so you can get your car up and running and Rep the Rewards! You need to check them out! www.kermatdi.com
Пікірлер: 39
@Clodrock2 жыл бұрын
Great video. I have a 2013 Audi A3 TDI and this simplified the process for me immensely. Got the tuned file from Charlie at Kerma in less than 24 hours. After receiving an error code ("F002") during the flash process, I got on the phone with Jason and he and Charlie were able to resend me an updated tuned file based on the error right away and after that, the flash process went smoothly. Now my A3 TDI runs like a beast! I ordered the DSG tune as well and can't wait until their special tool is available to help me complete thst process. Thanks again!
@tavisvandekletersteeg5513 Жыл бұрын
Very helpful video, was the exact same process for my 3.0 TDI 👍
@emsmkivgolf4 жыл бұрын
This was a huge help. Thanks!
@PincheALsGarage4 жыл бұрын
Your welcome
@IDLELUNA183 жыл бұрын
Thanks this video was really helpful
@rossrossco5332Ай бұрын
God bless you🙏🏻 this was so helpful thank you!!
@Terps1993 жыл бұрын
How long did it take for the tune to load into the car? And did they charge you for the tune after you bought the qpro+?
@jaboejt223 жыл бұрын
I will never not watch this video when using the qpro+. I have had to reload my tune a couple times because of the dealer doing troubleshooting one of their steps is to just load their tune just in case. I didn’t use this video once and messed up the steps caused an error and the car wouldn’t turn over luckily found this video followed the steps and recovered from a bad spot.
@Givey83 жыл бұрын
Thanks for the tutorial. We couldn’t select the arrow and that helped a lot haha
@bryantlaprade84773 жыл бұрын
I cant select the arrow either, where you able to eventually? I tried calibrating the screen but it says calibration failed every time
@Givey83 жыл бұрын
@@bryantlaprade8477 yeah eventually it worked just as to really get in the corner with you nail. Kind of a pain
@bryantlaprade84773 жыл бұрын
@@Givey8 I'm gunna go try it one more time, even if it works I hope there is a fix for this, updating didn't do anything
@bryantlaprade84773 жыл бұрын
It fuckin worked!!! Pardon my French but I'm stoked I thought I was screwed
@amerikian Жыл бұрын
Hi - could i use a Kerma tune for one MK6 and flash it on another identical make/model?
@PincheALsGarage Жыл бұрын
No they are VIN locked
@ArrtusMusic3 жыл бұрын
Can this be installed on more than one car? I'm thinking of buying one used but don't want to get ripped if it's bound to a single car.
@PincheALsGarage3 жыл бұрын
No they are VIN mated once used. You can not use it on any other car after it get used.
@Doulop2 жыл бұрын
Hey man, thanks for the video. Once I clicked yes to confirm writing file, I get an error that says “warning: please update template file”. Any clue what that means?
@PincheALsGarage2 жыл бұрын
No never seen that.. Hit up KermaTDI for that
@Doulop2 жыл бұрын
@@PincheALsGarage I figured. Thanks man. Will do
@sebastiansanchez5431 Жыл бұрын
@@Doulop we’re you able to figure out the issue i just got mine today and I got the same issue
@Doulop Жыл бұрын
@@sebastiansanchez5431 yes, email Kerma and tell them you got that error and they will send you a brand new link. If you email them now, you might get a response by the end of the day :) best of luck!
@roygrey42314 жыл бұрын
Hi! I have a questions, how big is stock files 2MB? Can you use a different vendor to modified files or you have to work only wits KERMA? And, how many vehicle you can read and write? I checked in Malone tuning, they devices looks prety close, bat allowed, locked, to only for 1 VIN?
@PincheALsGarage4 жыл бұрын
Locked to 1 vin dont really know the file size but it is really small.
@PincheALsGarage4 жыл бұрын
I would never allow someone else modify a file unless the car gets a dyno tune. Kerma puts in many many hours of tuning to get these Tunes right and safe. Having a random tuner mess with it is just a big NO NO...
@roygrey42314 жыл бұрын
@@PincheALsGarage I have tune shop in my contry which do tuning in the same level like KERMA, but chiper 3-4 times than KERMA....
@erichgeilerbmx4 жыл бұрын
What type of file did you receive back from KermaTDI?
@roygrey42314 жыл бұрын
@@erichgeilerbmx I didn't send them my files! I don't wanna to pay them around $800 for programmer tool which I can use for ONLY 1 vehicle!
@DriveOnGuard3 жыл бұрын
Thanks dude!
@nolanbollenbacher6097 ай бұрын
Is there any way of doing this without a computer because I wanna tune my car but if I need a computer to hook up to the tuner then there’s no point
@PincheALsGarage7 ай бұрын
You can ship the ecu to kerma
@Polycus2 жыл бұрын
Have you had any issues with changing tunes? From modified to stock?
@PincheALsGarage2 жыл бұрын
Not yet. Done it 2 times so far with no issues
@franciscoveloria32683 жыл бұрын
Hi man, How long did it take to receive the modified file from Charlie ?
@franciscoveloria32683 жыл бұрын
Took 1 day to receive the modified file from Charlie. For anyone looking for the same answer
@PincheALsGarage3 жыл бұрын
Yup 24hrs
@JP-pl9mv3 жыл бұрын
Al, what area are you located in bro ?
@PincheALsGarage3 жыл бұрын
Escondido
@JP-pl9mv3 жыл бұрын
PincheAls Garage bro, how much would you charge me to do my DSG tune ?