How to FLUSH your outboard engine|The HEALTHIEST and CHEAPEST way possible!!!!

Рет қаралды 33,625

Күн бұрын

After tireless research and talking to every expert I know who has his own boat!! Here it is the healthiest and cheapest way to FLUSH your outboard motor after running it in the saltwater. Anyone who wants their boat to last knows that outboard maintenance is paramount. In this video I show you the way that I think is the healthiest and most cost effective way out there. This project will take you a total of thirty minutes including the time it takes you to order the parts an amazon. The health of an engine is regulated upon maintenance and flushing the engine is a huge part of that IMO. When you return from a long day on the water you want things to be as easy as possible and here’s how. Enjoy the video if you have any questions please feel free to ask.

Пікірлер: 35

@AmericanConstellation Жыл бұрын

Not only does this flush your engine better, if you are tuning up your engine on mouse ears, you might find out that when you take your boat to the ramp and fire it up in the water, it won't run the same. You need to run your engine lower unit under water to get that back pressure on the thru hub exhaust.

@retiredguyadventures6211 7 ай бұрын

I ended up buying Rydlyme descaler and a small pump to flush out my old Yamaha 60hp 2 stroke outboard. I dropped the lower unit of the engine, and hooked the output of the pump to the water intake tube of the engine. I also had to take the thermostate out, but it needed replaced anyway. You mix the Rydlyme in a 5 gal bucket with 1 gallon of water, and put the pump in the bucket. The water comes out of the pee valve into the bucket, and is then run back through the system by the pump. I ran it this was for a few hours. There was at least 1/2" of sludge on the bottom of the bucket when I was done. I could not believe how much crap came out of the engine. It is a little pricey to do it this way, but it works.

@hunterdeporter6264 Жыл бұрын

You got my like with the "Come on man" comment lmao

@toupsclassroomtoupsclassro9557 Ай бұрын

Best Way ty i use an old bilge pump and pump to a spare can as I use vinegar and dawn and hate to waste the water pumps quickly will reuse twice or so........

@stevedockery3534 11 ай бұрын

Darn good idea my friend. I may try this on my Yamaha 50 / 4 stroke. Just gonna have to measure the lower unit and bucket. Steve

@johnwatson7543 2 жыл бұрын

Sweet video! I’ve been looking for an easy way to flush!

@rossevans1774 6 ай бұрын

Went to the second hand (recycle) yard got a used clean drum about 44Gal/170L for $10, cut the top 1/3 off with the disc grinder, there is no need to put the motor in gear so hung the garden hose over the side, run the F70 for 10 minutes. When finished take the hose off the faucet and drain (syphon) drum water into the garden or the storm water pit.

@rossevans1774 6 ай бұрын

That's a PVC/plastic drum of 44Gal/170L.

@glockbiker1 2 ай бұрын

One flaw is supplying the new water from the bottom. The weight of the water in the trash can is going to try to backfeed into the drinking water system. Need to supply fill water at top with air-gap between supply water and weir. A small amount of water can be drained from the bottom at the same rate as the make-up water. Also maybe remove the prop during this operation. Or cross your fingers with muffs. In any case, there's really no reason to run the motor for more than a few minutes to conduct tests or flush cooling system. Just my observation.

@michaelherrmann6951 Жыл бұрын

love it thanks

@enzodelbono9884 8 ай бұрын

Great informative video...did you use any chemicals to flush the outboard motor...?

@DonziGT230 11 ай бұрын

My dad and I flushed our engines with muffs and never had salt problems. The bucket will not do anything that muffs can't do as long as you're using the muffs properly.

@AutoBudz Жыл бұрын

This will work great for my little 15hp suzuki!! Thanks for sharing

@TeamTnA44 Жыл бұрын

What about a drain on the bottom instead. Then fill the can as usual ? Not sure but I've tried it with muffs and the can with no drain . Only problem is getting the motor to lift out and tipping the can over . Heavy . Do you put detergent in the can when you flush? I'm in brackish to salt water Thanks . Mercury 30hp

@shadyfieldhomestead1974 2 ай бұрын

Do you think that’ll work for a Yamaha 115? My water pressure at home is only 35 psi

@Justindelozier Жыл бұрын

I cant find that fitting anywhere... what store did you go to? Also cant find the rubber gaskets for males only females

@user-zh2lj7dk9r 10 ай бұрын

What size motor is in the video? need to do this on a 115 2 stroke. So tired of ears,

@rotfan77 Жыл бұрын

I’ve been looking for a large trashcan or some thing like a barrel to run my Yamaha F150 outboard and it needs about 26 inches from the front fin to the back and most of the garbage cans I find around 24 inches. Any advice appreciated. Thanks.

@belowtheboat3482 Жыл бұрын

If the trash can won’t work I have seen other guys ,specifically guys with twin engines, use an old 500-100 gallon water box. They are used in agriculture I don’t know what they are called specifically but they are a plastic tote that has a metal cage around it.. maybe try that!!

@steventghc8723 10 ай бұрын

@@belowtheboat3482 Old post but theyre called IBC (intermediate bulk container)

@retiredguyadventures6211 Жыл бұрын

Was wondering if you added vinegar to the water to flush out salt buildup?

@belowtheboat3482 Жыл бұрын

No sir I have never heard of doing that!!

@travelnguy2002 7 ай бұрын

I've seen a video where a guy uses vinegar and dawn soap. He's been doing this for over 30 years, and his motors have 1,000+ hours on them.

@SandmannOZ 4 ай бұрын

Can't do that with a hydrofoil on your engine... ask me how I know.

@adamkelderhouse2175 Жыл бұрын

Where did you find the fittings

@belowtheboat3482 Жыл бұрын

Amazon has most of them. I think I may have got some from ace hardware as well.

@tydengr Жыл бұрын

how long you flush the outboard?

@belowtheboat3482 Жыл бұрын

10-20 min but that’s way overkill I just leave it running while I am cleaning the rest of the boat.

@MrTBronson Жыл бұрын

I’m picking up a used boat next week and started watching these video on flushing. I like your video but disagree with running the cool water thru the flushing process. I think the motor won’t get to temperature properly and the thermostats won’t open so water won’t properly flow thru the motor. The motor has to heat that water up so thermostats open otherwise water stuck on other side of thermostat doesn’t go anywhere, no? The bucket way is the way to go though because muffs create the same issue by constantly introducing cool water so it’s not a proper flush.

@jefmichel4027 Жыл бұрын

A boat motor always runs in cool water. How do they ever warm up? It will be fine if you let it run for a few minutes (up to operating temp).

@benjithebulldog5637 Жыл бұрын

So do you have to wait for the ocean to warm up for your thermostat to open?

@jefmichel4027 Жыл бұрын

@@benjithebulldog5637 You missed my sarcasm. Relax.

@benjithebulldog5637 Жыл бұрын

@@jefmichel4027 my bad

@MrTBronson Жыл бұрын

@@benjithebulldog5637 what sense does that make? The point is to flush the salt water out of the entire engine passages. The thermostat opens based on engine temp not ocean temp. Didn’t mean to offend you just asking you a question.