Excellent job once again,Jeff!!!! You definitely rocked the good ol G Body... Love the video,Jon should be so lucky to have friends like you!!!! CUT AND WELD ON.....

Some of the best content on KZfaq. Excellent stuff bud

Man, you once again, knocked it out the park!! good job Jeff

love those G-Bodies, sold mine a few months ago but with your continuous tutorial. I might just get another and take my time. watching from Charlotte NC. Thanks

I love the videos and how u make it look simple keep up the good content

Helpful video! Makes me comfortable with the cutting I've done on mine this week. Time to get to welding

Great video jeff,im getting ready to do this to my Malibu, I'll be using a cutoff wheel and jackstands to do job,thanks for the good tips

Great job brother!!! I’ve been looking for a video like this forever. If you ever do a mini tub on a gbody please post it. Thanks

Great vid. Very interesting and just the right amount of detail and time lapse

About to notch my wagon. Thanks for the tips Jason

Good video. This was a much needed topic to go over.

I love the “G-body shuffle”!!

Great informative video as always

Perfect I'm about to do this to my 79 coupe "devillen" I've been hesitant because of thinning the frame but the inner support is all I needed to see and I'm originally a lowrider guy so a plate on the inside of the frame makes sense too. The only thing I'll do different is drill holes in both rear cross members and slide the connector bars inside and weld them.

Well done. One of these days I'm gonna do a notch on my wagon. In the drive way with a grinder/ cutoff blade and a 110v mig will be a bit tougher than the job you did. Wish you were colse to New Orleans I would sub out some work to you for sure!!!

Great vid learned a lot from watching it 👍

Excellent work bro 💪👊☝

Peep that Packard in the background! Can’t wait for that.

Makin it sound simple I love it

I was hoping you didn't catch the gas tank on fire good job man love the video

just did mine , thanks for the video it helped a lot 🤙

There is a pre-cut kit to do this? Who knew! Very cool.

Damn good job bro. 😎. Very detailed video.

does the cross support you welded in negatively affect handling for non drag application? like if I want to do a mild pro tourer?

Great video, do you have a video of how to notch the front to a full turn on big wheels?

As much as Id love to tackle this myself is this something you would want to do on an Elco?

Good video, I always just use the factory piece that I cut out . I try to cut 1" out of center but try to leave just a little bit of the round edge on top and bottom of frame and over lap the pieces. I think it's a little stronger and you don't have to buy nothing.

Nice work.

Is the bracing necessary if i have the umi shock mount brace?

Great Job !!

I have a question about the inner part of the wheel well. Did you show where you or how you hammered it or messaged it at?

Nice video man I just subscribed. I see the plates on the car are from n.c. I wonder if your close to me I'd like to get a price from you to do this and mini tub

What coil spring can I use to clear 24s I was told s10, Buick, Roadster, Monte Carlo or k1500 with out a lift kit. Please help thanks

did mine the same with 1 5/8 tubing & the bars running up to where the upper controls mount are pretty close to my upper tubular control arms bout an inch away with full tank & car lowered . i hear them hit here and there while driving . took it to the drag strip did fine but will it affect it being limited to transfer weight back when launching? i’m thinking i can notch them for more clearance

By doing the same thing.. can i get 315/60/15 to fit? 15x10 rim 5 1/2 Backspace? or will i have to mini tub car? same car 87 cutlass

What’s the widest tire I can fit without tubbing I have a 295 30 20

Are the 87 monte carlo ls. This smooth to frame notch

Great video

What size tubing is that ? Looks good 👍🏽

Here’s a dumb question. If I notch my GBody 1” on both side obviously. Can I shorten up my rear end by 1” on both sides in order to get a deep dish rim installed. Any opinion.

What did you use to hold the back of the frame up so the rear quarters don't buckle

Did that G-brace handle all the power your car makes?

I have an 85 El Camino with a 10 inch rear rim that fits no problem with no frame notch, I want to get a 12 inch rear rim in there is that possible with a frame notch, I know Umi carries this frame notch kit I have full Umi suspension on the car now.

Awesome job

Great content. Can’t see where else you plan to strengthen the g body chassis. But How do you plan to mount the arb? My arb welded to the cross brace where you put the tubes forward

Very good vid

Know you made the video a while back but I might frame notch my cutlass. The video was head on!

How long did it take you to knockout the frame

Hey Jeff, been following you KZfaq channel for a while. I’ve got a 87 Monte Carlo SS, and I’m trying to fit a 20x10.5 315/30/20 under the back. With a 1inch spacer, we’re just a little off (maybe 1inch). Do you think a frame notch would do the trick or is this mini tub time?

Good video thank you

Great breakdown. Did you find the kit kind of pointless? I have the raw steel here to do this, and I was thinking of cutting out the piece, tracing the piece that comes out and cut it to fit. It seems pointless to buy the kit since you're already doing that anyway. Thoughts?

Can u tell about knoch n 26 on my gbody 1987 ss monte carlo ss

tie in the frame ends on the bumper bracket.. huge!

Hey bud great job...what kind of plasma cutter and welder is that?

I tried To Put My 24s On my Buick Regal I put adapters And A Spacer It Was Scrubbing the frame will this Help ❓

can you fit a 305 back there now?

Nice! So what would something like this cost at a shop and the average turnaround?! I know different areas will cost more than others, just looking for a ballpark.

I need some like this done on my gbody monte Carlo SS

nice job....

How safe is it to notch it like that. I know you added bracing but isn't there still potential for bending? My old 69 Camaro used to bend the rails not even notched

Would you say that’s an 8-10 hour job? I mainly do Jeeps, but I have a customer with a Monte Carlo who wants a quote to do the job.

My question is how deep or wide a wheel can u run once u do a notch 10? Or 11? I assume a tub would all few more inches

I was able to fit a 275 radial on mine with out notch . But I’m notching it to try & fit a 315 ona 10 or 11 wide wheel . Great video

Are you guys still working on cars if so can you send me the address I'm in nyc and would love to do the frame notch on my g body just let me know how much ok thank and keep up the good work

What size rim and tire

Btw hope your back is much better

What the best way to notch the front of a g body cutlass supreme

When you were cutting that out I thought it would weaken it considerably and how you were going to compensate! We have to give to get when Hot Rodding! Good Common Sense goes a long way

Think could you make a anti-roll bar with that attaches to that cross bar you welded across frame maybe attach coil over mounts to it too sell it as a kit

Great video. Stock drum beaks on a drag car though.

I was wondering do you think I would have to notch my cutlass frame for a 24x10 rear wheel..??

Good job

All these months my car been @ RPM Motorsport I didn’t know that was you I would’ve been asked you about frame notching... I need someone to Frame Notch mines

Where are you located??

What size tube did you use ? I think i missed it. Thanks

after completing the rear frame notch kit how big width wheels can fit back there x10? x10.5? x11? x12?

Hello are you taking any projects on such as this but I would like it to fit 24 x 12 in the rear with no problem

Great video! I have an 85 el camino I’m looking to have some work done to. Can you DM me?

Very nice job sup clean

How much cost this work ?

Get video where are u located

What you charge to do tht

How many hours would you say you have into the notch.. that fitting up and all ?

Great job, what would you charge for the whole job ??

Do you cut both sides out then put in plates or one by one ?

Nice work. Where are u located

How much for you ro do my frame notch. Awesome video.

What’s the back spacing on the wheel you’re gonna use. Might be doing this to my Malibu soon.

How much does something like this cost?

How much do that cost

Hey bro, is the rear end shortened at all? I am trying to fit a 22x9 inch wheel with like a 285/30/22 tire out back. I am going to notch frame but if i also shorten the rear end how will that work?

Without doing a mini tub, how much tire can you get in it? I'm wanting to run at least a 295/60-15 on a 10" wheel, but I want it tucked. Wondering if I need a mini tub as well.

Getting ready to c notch my monte ❤

He might want to add a shock tower brace frm UMI for more support with that notch if he hasn't already

Does a 15x8 4.5 bs fit with this

What's size welder did you use,

What is the rim size that you're putting in there?

Can u fab up a wide body kit for g body? @highpsitv 4:07

Where did you order the gram notch kit?

You slammed the pipe in the rear!?