🔥 How to FRAME Walls 🤜 Steel Framing / TINY HOUSE 7 X 4,80 ✅ Drywall

Рет қаралды 1,521,788

Жыл бұрын

🔥 Drywall partition ▶︎ How to Build a metal framed wall 💪 PLADUR
👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇
• 🔥 Drywall partition ▶︎...
Profiles for exterior and wet areas
These are profiles that the difference is their composition.
They are made of galvanized steel type DX51D and have a Z450 galvanized protection (except for the U Profile, so they are suitable for indoor humid areas, semi-outdoor areas and outdoor areas. Depending on their geometry they can be vertical elements (Studs) with a nominal thickness of 0.7, 1 or 2 mm, or horizontal elements (Master or Channels) with a nominal thickness of 0.6 or 0.7 mm.
▶︎ What is an OSB Board?
An OSB board is made up of several layers of wood chips glued together with pressure applied. The layers are not arranged in any direction, as it may seem, but rather the directions in which the chips of each layer are oriented are alternated in order to give the board more stability and resistance.
▶︎ What wood are used?
Mainly coniferous woods are used, among which pine and fir stand out. On some occasions also leafy species such as poplar or even eucalyptus.

Пікірлер: 234

@gordonagent7037 11 ай бұрын

Mate, just found your channel so I’m a new subscriber now but just wanted to say you must be the most practical framer I have seen, commonsense and practical and very easy to follow. Thanks for sharing

@mihaiflorin7900 7 ай бұрын

@christophermapes5176 11 ай бұрын

Dude's a brave man, metal framing without gloves!

@constantverellen505 6 ай бұрын

Aye !! ! 😎

@jeromegarcia5396 2 күн бұрын

Oh I bet he got bit lol same with barb wire rolls, you need gloves and Glasses because it attacks without warning 😂

@jeromyreno Жыл бұрын

Killer work 👌🏽

@sqnhunterx 4 ай бұрын

I suggest he put hold down bars, threaded bars 20cm in from every corner, one down beside every window and door, and ensure there is one every 2.4 meters. These are set in the concrete and go to the roof frames and can be tightened with long threaded nuts. It is cyclone proof then. ASWD45 cyclone standard.

@diverable Жыл бұрын

Excellent work 👍

@centexan 8 ай бұрын

I love steel framing. Never done it on a house, just small commercial spaces.

@feralbigdog Жыл бұрын

i expected from the title that this would be instructional, i have questions that this didnt begin to answer, such as do the exterior studs have to all be cut to the same length like in wood framing or is it just the ends like in some videos of i saw of interior metal stud framing, where there was some wiggle room between the first and last studs, relying on the strength of the metal and the screws to hold things up? is the spacing the same as in wood framing? what is with those corner things?

@warren-e-dee2671 28 күн бұрын

Dude u rocked that project out!

@uncut_Diamond Жыл бұрын

Hola Cristian,,felicidades por tu contenido,se nota tu profesionalidad, estoy diseñando mi casa y este video me sirvió de gran ayuda,pero tengo una duda,tengo que hacer una cubierta de 6 metros de ancho, sería viable este sistema? que medidas tendrían las viguetas,? todo esto lo confirmaría con un arquitecto, pero es para ir haciendo cálculos,muchas por todo,un saludo

@jjk3240 10 ай бұрын

Greatly talented. Doing it all alone.

@shakejones 3 ай бұрын

Well done, great video! Thank you for sharing mate - NEW SUB 🙏🏻

@mhelmi73 4 ай бұрын

Great job bruh 🎉

@SashaXXY Жыл бұрын

Awesome work! Thank you for the upload!

@brabus343 Жыл бұрын

That's a nice job 👏

@yosefzentino2268 8 ай бұрын

Bravo 👌👍👏 , impressive work.

@MeGustaTV Жыл бұрын

Outstanding work! I’m subscribed and waiting for more of your videos.

@user-pe3ti6vo9d Жыл бұрын

Mi hermano felicitaciones!. Mi respeto y admiración por su trabajo. Me identifico como usted.

@omaryounes5177 Жыл бұрын

Amazing brother

@jhonnybaezcastillo5210 9 ай бұрын

Excelente 👌

@back2basics597 Жыл бұрын

Competence is such an amazing thing to watch😊😊😊😊😊😊

@MetalMachineryTechnology Жыл бұрын

super project 😀

@germanfuchs Жыл бұрын

Buenas. Usaste perfil de 0.5 de espesor? Yo tengo q hacerme una tiny de 5x4 y habia pensado utilizar los perfiles de 0.5mm pero por lo q investigue de usa el de 0.9mm Que opinas?

@jesusvaldez7400 Жыл бұрын

simplemente hermoso, este video es mi inspiracion para construir dos recamaras de steel frame en un segundo piso que es de concreto, tengo demasiada teoria en construccion y he hecho trabajos menores pero me siento capaz de hacerlo yo mismo felicidades y muchas gracias por compartir

@teacherstahlisahib1159 3 ай бұрын

😅

@wolfgangdietrich4141 Жыл бұрын

hi, one question please, how strong, thick are the metal purlinks, what kind of screws werwenden they for it, thank you

@danial_ahmad 3 ай бұрын

saya dari indonesia sangat suka dg fidionya.....sangat mantappppp😅.... cara kerja yg sangat profesionl banget.sehat selalu..hati hati dlm bekerja😅

@rafa-31 3 ай бұрын

Impresionante tu labor

@cemozguner4903 4 ай бұрын

Hem çalışmanız hem de çekimler çok güzel , tebrikler...

@luvmonkey666 Жыл бұрын

So for the diagonal braces are you actually cutting a 45 or just sliding it into the other piece?

@glidercoach Жыл бұрын

Nicely edited.

@marcosmarques3894 Жыл бұрын

Thank you for your work!..

@marcosmarques3894 Жыл бұрын

Gracias por tu trabajo!..

@marcosmarques3894 Жыл бұрын

Obrigado por seu trabalho!.. " Agora no meu idoma"

@Omobilo 7 ай бұрын

What's the thickness of the metal in these profiles? Options I find locally are 0.5mm or 0.6mm or 1.5mm thickness for pairs: 70mm x 50mm x70mm & 70mm x40mm x 70mm

@luizhenriqueoliveira8181 Жыл бұрын

Qual placa vc usa para a parede externa?

@vegehippiviking5463 7 ай бұрын

Witaj,pozno Cie znalazlem ale musze przyznac ze latwo i przyjemnie sie oglada, ciekaw jestem czy przyjmujesz do przy na przyuczenie ale tak po prostu, nawet jeseli osoba miala byc tylko do pracy jako pomocnik. Dzieki serdeczne. Pozdrawiam

@luis1570 2 ай бұрын

te quedo chingon

@mogo6642 Жыл бұрын

I’m a steel framer. Your technique is ‘odd’ but i can see your skill none the less.

@hetfield144 5 ай бұрын

Yeah. He frames his "walls" like a carpenter thats odd..

@balloney2175 3 ай бұрын

@@hetfield144 Yeah, not like a ...

@arnoldtarbooz1420 Жыл бұрын

nice job

@RonElySoberano 4 ай бұрын

Galing lodz

@68cutty Жыл бұрын

nice work where did you get your roof metal and how much did it cost

@edifpandeazucar6694 Ай бұрын

hola Cristian, excelente vídeo!!! , y dónde compras los perfiles ? Gracias.

@Miller-tv1 9 ай бұрын

Eres el P..... AMO del DRYWALL.

@ricardocrlomaochoa5485 6 ай бұрын

Muy buen armado, me hubiese gustado que colocara la pared de draywall

@ronhogandrywall 5 ай бұрын

Nice! ⭐⭐⭐⭐⭐

@user-zw9tz5ur2u 3 ай бұрын

เยี่ยมคะ

@sercalservicios 11 күн бұрын

TIENES UNA LISTA COMPLETA DE LOS VIDEOS DE ESTA CONSTRUCCION QUE ESTAS HACIENDO EN EL JARDIN? ESTARIA BIEN VER EL PROCESO COMPLETO DE ESA CONSTRUCCION. FELICIDADES POR LOS VIDEOS, SON GENIALES

@peterkral4660 Жыл бұрын

Really impressive

@mucahit0652 5 ай бұрын

Perfect

@ismadd1990 9 ай бұрын

what type of screws did you used?

@SamsuNg-yz8jd Жыл бұрын

Hola Cristian buenos días, por lo que veo en el video parecen ser perfiles PGU y PGC de 70 calibre 22 (0.7mm) es correcto?. Lo que me intrigan son los tornillos con el que armas la estructura soy de Argentina generalmente se usan T1 3/4 punta mecha o autop 1" Hex punta Mecha. Que tornillos serian esos?

@bthrower83 Жыл бұрын

No sé en Argentina pero en España se llaman metal-metal o chapa-chapa

@BroVinTV 9 ай бұрын

I think this is nice, it can carry loads and lateral moments but you forgot the lift force of winds during storm, I assume the floor is well connected to the foundation, I suggest to put washer on the screw connecting to the floor, and use screws with wider heads

@sqnhunterx 4 ай бұрын

@dwightsolis2495 Жыл бұрын

Can you show how you cut the 45° brace?

@jonathancharnes7984 8 ай бұрын

I would add gussets to the joints in the truss to improve the strength of the connections. Wonder if it is faster than wood framing and if it is less expensive than wood framing

@wiwbssjh8233 4 ай бұрын

It is faster and cheaper. You can buy everything prefabricated. It’s also lighter and stronger

@garethbailey780 11 ай бұрын

Where did you buy the metal stud work as I want too build a shed/man cave thanks

@laitauri Жыл бұрын

Молодец 👍

@seirrafavory5041 Жыл бұрын

Hi sir thx for this beautyfull vidéo 📼 👍👀💝

@88nikaken 8 ай бұрын

sir, can u tell me how much galvanized steel type DX51D did uu used to finish this house

@matocalabanana6226 29 күн бұрын

Hi, In the video description you state that you use DX51D galvanized steel Z450. Could you please tell us the brand or supplier? Thank you in advance. En la descripción del vídeo indicas que utilizas acero galvanizado tipo DX51D galvanizado Z450. ¿Podrías indicarnos la marca o el proveedor? Gracias de antemano.

@carloslolic3087 11 ай бұрын

lo que hace es con perfiles de chapa galvanizada esta todo carito los tornillos son iguales de los que se usan en argentina y uruguay t1 de punta aguja o t1 de punta mecha para mas seguridad el metodo que utiliza para hacer esta estructura esta buena por que refuerza mucho mas tipo cerchas el video esta claro esta clarito es un obrero no engaña a nadie lo felicito y medio buenas ideas gracias compañero desde uruguay

@user-nd7xt6gt1v Жыл бұрын

Good 👍

@1963serena Жыл бұрын

I like this technique alot, do have a drawing that u xould share, what gaige r the studs

@tragedyofwind Жыл бұрын

i like the positive energy of this vid. I saw many vid of differnt way of building wall, but when it come to concrete wall, 3D printing take so much hate and crap. I think the metal work community is so much better than the toxicity of traditional concrete. I guess this is why we have so much improvement and tech on metal than concrte in construction.

@constantverellen505 6 ай бұрын

Perhaps warming up the concrete before and during application will upgrade it to selfhealing characterics ( like the old romans did) and less toxic.😎

@tragedyofwind 6 ай бұрын

@@constantverellen505 u may not know. Heating during the curing process reduces the compressive strength. Since concrete harden and get stronger every year, it would take us 100s of years for modern concrete to catch up the strength of Roman concrete. The reduced early strength of Roman concrete is evident by thei structure where they have to use a thick layer to compensate. The chemical property of Roman concrete is actually a research point where we could include in our modern concrete without reducing our strength be use we are using concrete to carry way more load than the Romans.

@dantevanniekerk Жыл бұрын

mate!!! love the handy work, precision and effort - but you know there are companies that roll & punch your required sections to a fraction of a millimeter... off to the races

@marcelofontenele7653 Ай бұрын

Top D +

@SNOWFEBROWN96 4 ай бұрын

Are you using a stars crew to attach the frame sir?

@javiermartinfernandez3383 Жыл бұрын

Hola usas perfiles steel framing? O son de pladur, gracias buen trabajo

@jesusvaldez7400 Жыл бұрын

yo creo que es drywall, pero para un segundo piso yo lo haria de steel frame

@Jordan-pf9ws 8 ай бұрын

This may be a dumb question but is it cheaper than lumber?

@Dumb-Comment 16 күн бұрын

Galvanized Square Steel Eco-friendly wood veneer Extension screws borrowed from his aunt

@noemniz2688 11 ай бұрын

Hands down.

@-joe90 4 ай бұрын

Excelent

@DangrsDave Ай бұрын

Well Possum on a gum bush... I thought those were roof trusses in the beginning. Also, are the outside wall studs thicker gauge do to load bearing requirements?

@caustinolino3687 7 ай бұрын

With all those screws, should you use locktight or something?

@damiangarcia770 4 ай бұрын

Muy buen trabajo, que medidas tienen los perfiles usado?

@ivanchilperico3022 28 күн бұрын

Que distancia tiene el espació que estas cubriendo, que medidas estas usando para cubrir esa zona??

@chiseen 2 күн бұрын

hi, planning to do an awning on the side of my house with this concept. Will it hold steady during typhoons? I live in asia

@meshedgears2794 5 ай бұрын

This must be at a location with no permitting required. 25 gauge steel is not considered structural even if it is made into a truss or shear panel. The connection at the screws are not considered strong enough. The fact that the truss bends at all under his weight is actually showing the weakness not the strength.. I usually just ignore videos like this, but it would be bad if someone ran down to there local big box store and bought those 25 gauge "c" channel studs and assumed they would work. I do have to admit that seeing the wood carpenter way of doing the layout was interesting, trained professionals in my area shoot the track to the floor and put the ends on first. They then snap the studs in between.... Its faster. Most drywallers say they are considered behind schedule before they arrive for the first time. -MG

@JorgeMarioManuelOrtega 9 ай бұрын

why the strap bracing if u add osb sheating? the osb is all a massive strap. ( if u add enough screws obviously)

@pedromiguel8597 Ай бұрын

Olá boa noite Existe possibilidade de saber que tipos de raia utilizou e parafusos? São raias de 3 m ou 6m? Qual a espessura da raia? Que parafusos utilizou para fixar as raias entre elas? Obrigado

@UrzaMinor84 Жыл бұрын

Doesn't the Engel grinder heat up the metal and that can cause rusting later?

@gme10955 Жыл бұрын

What gage steel are you using?

@carlosmangasep9659 2 ай бұрын

amazing work how what is the duration of this construction?

@projectskyindonesia Жыл бұрын

Is that galvalum 7.5 or 10?

@pablopiblito7955 4 ай бұрын

El piso es una loza tradicional con una cubierta de placas de madera ?

@a.i.n.8476 4 ай бұрын

Are these the same metal studs used indoors?

@billybastar4022 Жыл бұрын

Also, I,would have invested in a tack welder, especially for the beams! Belt and suspenders. Anyone with a metal garage door can relate to self tapping screws failure….100%.

@alessandroprado751 4 ай бұрын

Muito top ,pena que aqui ainda e mu caro o sistema 😢.

@luisdecossio8746 4 ай бұрын

honestamente el esqueleto prefiero hacerlo en tubo y los acabado en drywall, excelente trabajo

@fabiorosa3872 Ай бұрын

Qual acabamento exterior para proteger as madeiras???

@chasych7575 Жыл бұрын

can you list all the materials used? there dimension and sizes? screw type and size?

@chasych7575 Жыл бұрын

@@projectskyindonesia what size did you used sir?

@chasych7575 Жыл бұрын

yes but we need to k ow because i am from foreign country which the light steel need specific sizes upon ordering

@keonclare Жыл бұрын

I would also like to know what gauge steel you used.

@sibbyd8743 Жыл бұрын

The steel appears to be 25 gauge thickness track and stud. Also 2 5/8" width. Screws look like 1/2" self-drilling (not self tapping) pan head screws, based on my experience with the material

@milonkhan-ro5bc Жыл бұрын

I no

@key2010 7 күн бұрын

my back hurts just looking at this

@carlosantoniosilvaguillen2240 15 күн бұрын

Puedes compartir un vídeo de la elaboración de la plataforma que esta debajo de la estructura por favor

Жыл бұрын

Can I build like a bedroom on top of that? or it won't support the weight? (¿Puedo construir como un dormitorio encima de eso? o no aguanta el peso?)

@peterxyz3541 Жыл бұрын

It should support human. Research “SIP” or “Structural Insulated Panel” construction He’s using SIP onto of joists

@fernandopalma1822 6 ай бұрын

Olá, gostei imenso do video. Excelente. Pode me dizer qual a quantidade e carateristicas do material utilizado? Pois eu quero fazer uma estrutura idêntica em termos de tamanho numa área que tenho por cima da garagem mas não sei como contabilizar a quantidade e tipo de material a utilizar. Agradeço desde já a ajuda. E concerteza serei seguidor do canal.

@Prooblemm 6 ай бұрын

Leia normas e manuais. Esse video é só um ASMR e ele não vai te responder