Great tips; getting the clutch off and flywheel removal! Another good tip: Keep your chain sharp so it makes shavings, not dust. This will keep your saw way cleaner.

Rewatching this series. You are the one who got me bit by the HomeLite bug lol😂

I have been examining my non working saws or parts saws and it looks like two new new pistons and maybe cylinders. My XL Automatic with chain break that I was hoping to run, has metal flakes in the engine case. I used an endoscope to look down the intake hole. I have a couple old pistons and one cylinder in my parts box. Maybe they will fit and maybe they were not already replaced on another saw. I was not going to keep the saw, giving it to Leon or you. But after watching you tear one down, I may yet restore it. When I inherited my Grandparents house and shop, I recall seeing a small box with a piston and rings in it. It may have been for a vintage Homelite since Grampy ran these, and Lombard. Think I can find it now, after being here 20 years! Hoping. This XL Auto will run, I test ran it years ago; but not now seeing metal flakes in the engine.

Great video! Thanks🙏

Hope your finger is healing old friend. Be safe and take care. ❤️🌲🌲🌲❤️

Hope the finger is healing well.!!! Can’t wait for the next one .!!!

Bless you Smitty for sharing your wisdom with us!!!

Greaat video./ I have the same Homelite at home. It was from my father. He died 3 years ago. Now i am repair the homelite to work again.

I'm really sorry forry for your pain. But I did benefit for the clear instruction. Thank you and God bless and heal you, brother.

I have one of those I need to fix up too. That saw was packed full man lol

Dang! I hate you messed your finger up! Thanks for the tear down! Great info buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

i just picked up a really nice light blue metallic Super XL Automatic. In a few days, i'm picking up a really nice red one that has a bow bar on it. I'll definitely be watching your videos to learn about them. thanks in advance

Sorry about your finger, hopefully it's better by now. I have a Homelite Super XL and you answered a lot of questions by your video. Hope to get mine in shape before spring. Thanks again from Wisconsin.

Thanks for the video! Just bought a blue one for 50 bucks. This is beyond helpful

This is what I like. Thanks Smitty. This should be a runner, a few drops of blood per engine is the secret recipe.

Great step by step. Well done! Tell your finger to “ get well soon”

Good video. A lot of blood sweat and tears went into it. Sorry, couldn't resist.

You just earned my subscription. I've been wondering and not using my Homelite 400 XL automatic for years because of a boiling gas issue. Now I know and will address the issue.. Thank you sir.

Thanks for doing the video series smitty this will help alot of people with these saws..I'm honored to call you my freind and share ideas with....

Thanks 😎

Great Video!the when i had a problem with coil and flywheels on mine i guess i was trying to use the prestolite flywheel with the modern coil....

THANKS FOR MAKING THIS VIDEO i reciently picked up 7 homelite saws only one of them run so keep the homelite videos coming

Great video great info found in old super xl in a barn got it running sound great but I bet it could use the cleaning thank u for your knowledge

Good video. I worked on these saws there very reliable. You can't take the drive case off even with those 5 bolts removed cause crank is locked in place by the bearing and some bearing retainer screws.

This was a great video Smitty👍🏻

Great video smitty!

Good stuff!

I should have watched this before I just tore mine apart lol. This would have helped

Great Video....except for the ending issue . Thanks 😎

Wow smitty that’s crazy can’t believe there’s so much to do just in that one saw thanks for the video buddy and oh man I didn’t know you got your hand hurt working on that saw hope you heal up fast buddy. Thanks again for taking that saw on for porting definitely can’t wait to see what it’s got in store. And wow that saw was dirty. Thanks for the video

Great video. Question. Does the clutch have to be removed to pull the flywheel?

Would keeping a sharp chain go a long way in minimizing crud build up, as using quality oil and keeping a good tune on her, taking her apart looks fairly extensive, but that's one of the reasons I love vintage saws they are definitely a labor of love!

Great vid smitty 👍

I think a expansion chamber be cool I have same saw just no fancy exhaust cover Just got through redoing mine. Has points I cleaned all that and sanded them, runs ok has low power on top end. Still seems like it’s miss firing. I set the H and L at 1 and 1 1/2.

them tools will gitcha every time!-- lol! On the serious side, I have/use/work on 8 of these SXLAO's! Best model out there.I would like to see the RE-assembly of them. I have 1 apart as to your specs and it went well,--cept the screwdriver deal! I dodged that one! LOVED your video!!

Good ass video appreciate itand I hope your finger is doing well.

Good video I find them very useful .I am going to replace the seals and bearings on a xl12 .I don't know how different the supper from the xl 12 the auto oiler ,its got to be close .any way thanks for the time to do this video I watch ya when I can

Hi Smitty!!😀😀 How's the finger doing?? Hopefully it's feeling better. Take care my friend!!😀😀 Logger Al

Does it say "Super" on the tag? I have an XL Automatic. I think the Supers are 58cc.

👍

I am working on a Super XL Auto. It doesnt have the room to use the slick puller to remove flywheel. Where can I get a puller to do the job? Or at least a #12-24 x 3" bolts to use a puller of mine. Thanks for your video!

I kno this is a sxl but I have a blue xl12 would the carb off a red xl12 work in it since they have different reeds my carb Is shot from last person that had it

Great video, are the steps similar on a xl 103? Thank you in advance!

Thank you for this video! I have a Homelite Super XL that I have fully disassembled currently. What would you recommend for getting the carbon off and old paint off? I am looking to restore this saw :).

I have that saw and a blue one ,,,,Having trouble with manual trigger hold/release

Thanks for the video. I am working on my dad's super xl. I am thinking about rebuilding it. It has 110 psi compression, is that low for a homelite?

I wish i found you yesterday. I turned nut clockwise on chain sprocket and I think I broke something in side. can it be fixed.

That bear sounds a bit rough

Hello! I need help, by tapping he takes out pulleys to remove the disc from the electromagnet. I have bent the thread a little and now the nut doesn't fit. Do you know what type of thread it is? I have bought standard and fine Whitworth dies and they don't work, I think the Whitworth ones don't have the same thread pitch, thanks in advance. A greeting from Spain!

Buenas yo no hablo inglés pero necesito comprar el cilindro y pistón con cojinetes y empaques de una homelite xl motosierra por cuanto de sale eso o cual es el precio espero su respuesta gracias vivo en Santiago de Veraguad República de Panamá

I have that saw. Need a fuel pump diaphragm for carburetor.

Hello, I found two of these saws, one has a good compression of 150psi and the other is like 63 psi. Were Can I buy the seals and barrings at?

I clean my saws out 2 or 3 times a year lol

I have a question for you. I am considering rebuilding Grandpa's old Super XL Automatic. It is seized up, no longer rotating, so will I be able to remove the flywheel at all?

so, the exhaust on mine was too rusted up so do you know where I could find one

I could hear the crank bearing was bad it was rough and sounded like sandpaper there is a trick 2 putting needle bearings in U have 2 use grease on them so they will stay in place and won't fall out the crankshaft U use a block of wood 2 help get the out of the crankshaft OMG 3 25 2O23

What size Allen is it for the connecting rod bolts?

I have the same and no spark at all what i can do?

HOW do you know that the bearings and seals you purchase today, either NOS or parts made in CHINAMANVILLE will be trustworthy in the rebuild ?? I know the old production bearings were first class parts. Stuff one buys today is just a CRAPSHOOT. Nice video fella with down to earth information too. Peace v

Hi Smitty, you still out there? Do you sell parts for this saw

hows your finger?

😂