How to: GAN RS M (Easy Guide)

No video

How to: GAN RS M (Easy Guide)

Рет қаралды 188,515

Күн бұрын

Learn how to magnetise a GAN RS to make it magnetic and perform like a GAN XS for really cheap.
GAN RS: bit.ly/2OdNgG3
Magnet Kits: bit.ly/2RQniL4
Looking for high quality speedcubes at an affordable price? Look no further. We have a huge range of speedcubes, timers, mats, lubricant and more available on our website. In stock and ready to ship. Did we mention our shipping is crazy fast? Don't take our word for it. Give us a shot and our service will speak for itself..
www.dailypuzzl...
Not convinced yet? Use code "KZfaq" and get a discount off your entire order. Spend $100 and get free express shipping. International shipping available starting at just $8USD.
Social Media:
KZfaq:
/ dailypuzzlescomau
Instagram:
/ dailypuzzlescomau
Facebook:
/ dailypuzzlescomau
OCTILARY - CHILL TRAP BEAT
• OCTILARY - CHILL TRAP ...

Пікірлер: 446

@dailypuzzles 4 жыл бұрын

Thanks for watching our tutorial! We hope you enjoyed it and found it useful. The magnets we used are the N40 kit that we sell on our website, all 3 kits will fit this puzzle. Link in the description of the video. Would you like to see more videos on the white background in future? Or do you prefer the wooden desk? :)

@c0unt 4 жыл бұрын

Yes

@sammyadamssa9380 4 жыл бұрын

I really want to get a gans

@arnavkumar6462 4 жыл бұрын

Which magnets did you use??

@20-satyavankay46 4 жыл бұрын

wooden desk, friendly for watching at night

@junek1147 4 жыл бұрын

wooden desk looks great

@hvrst6241 4 жыл бұрын

Me: **got no magnets** Also me: SHUT UP IMMA WATCH THIS ANYWAY

@benedicto_4206 4 жыл бұрын

Harvest Lh me too!

@dominicmay3343 4 жыл бұрын

Me too

@MineCrafter-or4is 4 жыл бұрын

Same

@MineCrafter-or4is 4 жыл бұрын

I don’t even have a rubix cube

@oldytchannellol940 4 жыл бұрын

Same i have an rs and i would buy magnets if someone would put the magnets in for me cus im a lazy shit

@decstroyer6437 4 жыл бұрын

I really like the white background used in the first part

@daffo1179 3 жыл бұрын

Thank you so much! I used 4x2mm magnets. I should have listened to you when you said, we should use gloves. I split superglue all over my hand. I'm right now cleaning my cube. Later today I will try to lube it.

@nafiz1803 3 жыл бұрын

Will 4x3 magnet suit ?

@jpintor0583 3 жыл бұрын

How many magnets did you used?

@MuhammadIqbal-qr4xd Жыл бұрын

someone said that 4x2 magnet doesn't suit the corner piece, it causes the cover of the corner piece don't fit perfectly, they recommend something like 4x1 or 5x1, is it right?

@daffo1179 Жыл бұрын

@@MuhammadIqbal-qr4xd still have the cube and it moves fine. yes, the magnets were fitting in. my magnets had a thickness of 1.7x mm, not exactly sure. took them from a broken magnetic rubrics cube

@namiaqw8756 4 жыл бұрын

omg i magnetised my rs and it feels amazinggg

@Serkoid 4 жыл бұрын

really?? i main the rs2 M, should I upgrade to this cube?

@namiaqw8756 3 жыл бұрын

•Serkoid• it feels so good just have to make sure the magnets are really glued in or it’ll fall off

@namiaqw8756 3 жыл бұрын

@Project Jojo i used the 4mm x 1.5mm n40 magnets

@Lucyferrer1 3 жыл бұрын

@@namiaqw8756 how was the magnet strenght?

@muhammadwasea9189 3 жыл бұрын

i will certainly do this... the day I'll be able to afford it.. ... prolly the next million years

@jbw5485 4 жыл бұрын

I magnetized my GAN R a few weeks ago exactly like this. Every single step. Worked perfectly.

@rieyza21 4 жыл бұрын

Bro, i don't understand how u put all the magnets, what is the function of the algorithm, and i don't know what algorithm i should use

@rieyza21 4 жыл бұрын

I mean can u tell me how?

@jbw5485 4 жыл бұрын

Rieyza 21 day what? Follow the video. It’s not that difficult. He literally walks you through it. Step by step. It’s pretty straight forward.

@jbw5485 4 жыл бұрын

John Marr strong magnet kit of the cubicle.

@santoshkaurbharaj3244 Жыл бұрын

@rieyza2143 you just need to rotate the corners. You can do anything to do that.( corner teist will work too lol)

@nikkiunix7314 4 жыл бұрын

Great video as usual. Hehe I see the video editing is being taken to a new level 😊

@krushnakumargajbhiye2871 3 жыл бұрын

Hey Nikki call me back

@chickenwing669 4 жыл бұрын

Your video quality is getting better I luv the white background at the beginning

@ej22_gc86 4 жыл бұрын

Why does 1:48 sound like that assembling effect in lego commercials

@mattyyaaaa 4 жыл бұрын

EJ22 lol

@funcuberdeadchannel5426 4 жыл бұрын

HEY

@dominicmay3343 4 жыл бұрын

It does

@zayster8899 4 жыл бұрын

BUILD THE RUBUKS CUBE

@mcglitchhowironic4679 4 жыл бұрын

A cube has been magnetized in Lego City!

@Haruki-_ 4 жыл бұрын

I bought a Gan 356 rs recently and I’ll definitely magnetize it!

@Serkoid 4 жыл бұрын

I main the rs2 M, is it worth it to upgrade to this cube?

@twlcubing1578 2 жыл бұрын

@@Serkoid yes

@vo_12 4 жыл бұрын

You guys nearly have 8k subscribers already!

@sammyadamssa9380 4 жыл бұрын

Blue it’s because they are awesome

@JohnAJ-07 2 ай бұрын

3:30 billy is very clever

@rlsneaky 4 жыл бұрын

I tried it out, worked like a charm!

@rashmihavaldar 4 жыл бұрын

@sneaky YT where can you find the magnets?

@rlsneaky 4 жыл бұрын

Rashmi Havaldar I found my magnets on the magnetic conversion kit on speedcubeshop.com

@Serkoid 4 жыл бұрын

I main the rs2 M, is it worth it to upgrade to this cube?

@adamabdully255 4 жыл бұрын

Great vid I’ll use this for when if I buy the gan r s from daily puzzles

@madmaxthecubergamer2409 4 жыл бұрын

hopefully it's not the csh 356 r magnetized fail.

@bobateacuber7646 4 жыл бұрын

It can't be, all of them are based off the same polarity

@shaynem5580 4 жыл бұрын

BobaTeaCuber calm down

@madmaxthecubergamer2409 4 жыл бұрын

Lol

@androidlogin3065 4 жыл бұрын

Thanks for te Tip and best trick of rotating the corners in place and use only the first magnet as source for all the rest on all corners, the easiest and safest way i had ever seen to put them all well aligned and with correct polarity, really good trick and tip; thanks for sharing that for free.

@TTPlays1227 2 жыл бұрын

im about to magnetise my gan 356 rs and this is my goto video great job dude good vid

@nicodeaquino1548 2 жыл бұрын

But the question is.. can the magnetized Gan 356 rs surpass the 9$ RS3M 2020??

@cmos2235 2 жыл бұрын

Of course not in terms of value

@monuvij2280 4 жыл бұрын

Your contents are amazing .

@noogatok 4 жыл бұрын

Nice tutorial, Billy!

@ErikBromley Жыл бұрын

Great video! Just a few days ago I added full corner-core and edge-core magnets to my RS as well and it works very well, I'd recommend it if you have the magnets around...it's a bit difficult but certainly worth it

@Ball_Broz 10 ай бұрын

This was 3 years ago glad to see someone from 2 months ago and not 2-3 years

@romeogacusan1514 2 жыл бұрын

What algo did you use in the 4:20 mins

@cedrickviray5823 2 жыл бұрын

Thank's for this video I magnetized mine ang now it feels amazing

@jeffb.3541 4 жыл бұрын

Great tutorial, good application of life hacks on puzzle cubes.

@davidpaulhuizarodriguez1499 4 жыл бұрын

Very good video friend. Greetings from Peru. It will help me to magnetize several cubes with this Gan system such as: Gan 356 Air Pro, Gan 356 R, Gan 356 RS, Yuxin Black Kirin V2, etc. And an old cube but very good to be more than 6 years ago; Fangshi Shuagren Illusion. :)

@Serkoid 4 жыл бұрын

I main the rs2 M, is it worth it to upgrade to this cube?

@coolylame 4 жыл бұрын

got mine today and magnetized it. My hands are destroyed from the super glue accidentally spilling but the cube feels much better now

@Serkoid 4 жыл бұрын

I main the rs2 M, is it worth it to upgrade to this cube?

@jastoys626 4 жыл бұрын

Nice tutorial. I could say because ive also magnetized a gan r for a friend

@jimmyh552 3 жыл бұрын

Instructions unclear: I’m now *Felix Zemdegs*

@Usha_Prasanna 3 жыл бұрын

Then, the instructions are definitely clear

@jimmyh552 3 жыл бұрын

@@Usha_Prasanna 😂

@Gordonizon 2 жыл бұрын

*Feliks Zemdegs

@rendathecuberlol5008 Жыл бұрын

Zedmegs

@bigbosspanda1976 Жыл бұрын

The instructions were clear, they were just bad instructions.

@Sean-cs7zb 3 жыл бұрын

Thanks, I tried magnetising mine and it failed cuz the magnets were to high which make me unable to reassemble it and the magnets are in the wrong place every time I turn it. Now I don’t have a good speed cube. ;( Edit: it was all my fault

@ilyasaziz8588 3 жыл бұрын

Oh no

@gcolombelli 3 жыл бұрын

If you watch on Katie Films Stuff she had a similar problem on a 356R. I also had a similar issue on my RS but I managed to fix it by cutting a bit of plastic with a nail clipper on the corner caps. It's not noticeable after reassembling it and I had no issues since.

@harryharalambous2639 4 жыл бұрын

better than buying a GAN 356 M for $60. Billy: be careful not spill glue on the pieces. me: NO PRESSURE!

@melkiorgabriel9539 4 жыл бұрын

i still didn't magnetize my gan because of this advice

@nglawrence5057 4 жыл бұрын

Came here before the premiere

@datboi0669 3 жыл бұрын

Anyone know how to get glue off the gan RS?

@javierthenoob4456 3 жыл бұрын

Just buy a new one

@ruokuo3041 3 жыл бұрын

@@javierthenoob4456 big brain time

@Gr4atcubEr 4 жыл бұрын

Wow billy ur skills improved by a lot

@lipesias 3 жыл бұрын

I magnetized my RS and it was very good. It's super worth it

@matteocaruso1152 4 жыл бұрын

Wow, that great. What magnets did you use?

@allanpham684 4 жыл бұрын

Matteo Caruso Look on Dailypuzzles

@allanpham684 4 жыл бұрын

$4.50 aud to $5:50

@soisaus564 2 жыл бұрын

my nails are bleeding while trying to take the centar caps off trying to change the spring strenght

@M3ko2 4 жыл бұрын

Ayy noice! Deffo now know how to pry the RS open now 😂👌

@simplifyyourstudieswithrin9795 Жыл бұрын

This helped me save 5 dollars. Thank you

@harshudhani5777 3 жыл бұрын

What are the strongest magnets? N45 4×1.5 or N42 4×1.5??

@charmcaster5127 3 жыл бұрын

The higher the number the stronger it is

@billkax 4 жыл бұрын

Hello, first of all well done for the interesting tutorial and the creative idea. I would like to ask what size and strenght of magnets you used for this tutorial. Thanks

@dolandamon9765 2 жыл бұрын

I don't know about the strength but I used 4x2mm magnets

@amplitudemc 3 жыл бұрын

imagine you mix up your lube syringe and your superglue syringe at the end and glue your whole puzzle together when trying to lube it

@HI30s 4 жыл бұрын

amazing work, very innovative.

@puiyingcheung844 4 жыл бұрын

what magnetic strength you choose

@VishalFernando 3 жыл бұрын

Which magnets did you use for this? 4x2mm N42?

@twlcubing1578 2 жыл бұрын

N40

@BOT_x_PUBG 2 жыл бұрын

@@twlcubing1578 n 48

@FPerm 2 жыл бұрын

Or an alternative for taking the caps off the pieces is chucking your cube down the stairs

@macaroniiiyt69 Жыл бұрын

Man, mine just got super glued to each other. Any tips to fix this? When I detached it the black thing is broken

@joshriker4173 4 жыл бұрын

Good tutorial. Do you think 5x1mm magnets would fit? I like somewhat strong magnets. If not do you think 4x2mm would be strong enough? For comparison, think of the GTS3M magnet strength (That's what I consider as strong magnets)

@Hikaru109Ichijyo 4 жыл бұрын

checkout cubesolve heros magnetizing vids, his old main as GTS3M and loves that magnetic strength it has, and check on his magnet strength he likes. if you get neodymium 4x2mm they are strong enough (especially high 40's rating)

@adamjefrilam 4 жыл бұрын

What kind of magnet is that? Is it the n35?

@ifrog751 4 жыл бұрын

Here you go TINGMAN!

@sagarsingha1557 Жыл бұрын

What's the size of these magnets???

@kirytsu6549 4 жыл бұрын

I magnetized my cube, but 4 corner and 4 edge piece got glued and it glued on the the pieces that connect to center. What should i do?

@muhammadfajri2366 4 жыл бұрын

do you have any tips so the logo doesn't fade for gan stickerless?

@cubingpubg3399 4 жыл бұрын

what is the alg that you used?

@melissamailhot4695 3 жыл бұрын

Wait... That’s Billy? Yes, this is the first Dailypuzzles vid I have watched, came here from Tingman.

@badrulhasan9935 2 жыл бұрын

Great video BILLY

@tr_walkway1933 Жыл бұрын

Where can I get magnets for this? Can I use magnets from other cubes? (Like the Qiyi MS)

@mr.explosives8406 4 жыл бұрын

Great job

@r4ffifi 2 жыл бұрын

Im going to do with my dad but if we mess up I still have an excuse for him to buy me a new one 😂😂

@jolomax5105 Жыл бұрын

😂😂

@ticklebutt69791 4 жыл бұрын

Thanks so much this helped a lot!

@ossie423 4 жыл бұрын

You should make your own costum cubes, very cool

@jithttps__2700 3 жыл бұрын

im buying my friend this cube but im gonna add magnets for better performance

@ItsAarizCubes 2 жыл бұрын

great tutorial

@fatiharaudatul3167 Жыл бұрын

Can i use fork for opening the caps?

@Epic_Noob090 Жыл бұрын

Hey what are those white dusts in the GAN356 rs?

@alperenfazla4410 4 жыл бұрын

Which magnet did you use? 3x2 4x2 5x2 and what is strenght like?

@twlcubing1578 2 жыл бұрын

I recomend N40 4x2

@alejandrog2825 3 жыл бұрын

Can you explain how you have to magnetize the other edges:/ because an edge cant touch an edge. Do you add the magnet(in the edge#2) next to a corner that was magnetized by the first edge#1?

@codename_alfa 3 жыл бұрын

just turn the corner side, then you will get the 2nd edge and 2nd corner to magnetise.

@barrio3966 3 жыл бұрын

Goodddd✨ thank You❤️❤️❤️

@vtalishere7663 3 жыл бұрын

When i cant buy magnets i like terly jus use 3 drops of QIYI lubr or silicone lubr so its still stabile and why do you took the center out, u can just pop the edge

@abrambarron9464 Жыл бұрын

Does this work on the GAN 11 Air? This is because I want to magnetize his GAN so he will have a magnetic GAN cube.

@arturolorenzo1141 2 жыл бұрын

thanks a lot

@pesho3456 4 жыл бұрын

Great video! Also what magnets did you use? 40N?

@twlcubing1578 2 жыл бұрын

He used 35N

@TheEeryTeacher Жыл бұрын

im thinking of doing his with my RS but really don' want to mess it up.. would you say its still worth trying?

@adamjefrilam 4 жыл бұрын

I just magnetize my Gan RS with n35 magnets....its really stable than before....is does not feel the same as the XS but it does feel like the X with medium magnets

@adamjefrilam 4 жыл бұрын

@@Snow-qe8rd like most videos that talk about the magnets....it really depends on the person...its medium strength for me but for you...it might me the same or different

@fawwazrafi7794 4 жыл бұрын

yep thanks, I got gan x(r)s now

@kucingcalico 4 жыл бұрын

how good is it

@fawwazrafi7794 4 жыл бұрын

@@kucingcalico Gan XS but more slippery

@fawwazrafi7794 4 жыл бұрын

@@kucingcalicoThe similarity rating is 5-6 out of a 10 but more like 5

@kucingcalico 4 жыл бұрын

@@fawwazrafi7794 thanks mate

@fawwazrafi7794 4 жыл бұрын

@@kucingcalico if you want a budget cube but not overturn, and has magnet in it, you should buy Moyu RS 3M 2020 Edit : in my country , only cost 11-13$ in yours only 9-10$

@maxwellcubez2231 Жыл бұрын

Really helpful :) thanks

@cubingdude2434 4 жыл бұрын

Cool, awesome video.

@davidpaulhuizarodriguez1499 4 жыл бұрын

Very exelent vídeo, thank you. :)

@nickkenn1711 4 жыл бұрын

What magnet you use?

@zanderburton9885 4 жыл бұрын

description

@mountwade 4 жыл бұрын

Like the vid good job!!😀😄😁

@CephasTheWanderer 4 жыл бұрын

Can you recommend what magnets to use if you want strong ones? And is there such a thing as having too strong magnets? The shop here have magnets that go up to N52, sized 4x1.5 mm

@Dappa2097 4 жыл бұрын

4x2mm is the perfect size in my opinion, the strength depends on what you like, but n35 is the perfect balance between strong but not too strong.

@MuhammadIqbal-qr4xd Жыл бұрын

someone said that 4x2 magnet doesn't suit the corner piece, it causes the cover of the corner piece don't fit perfectly, they recommend something like 4x1 or 5x1, is it right?

@umiharyati4791 Жыл бұрын

Is N42 good for the cube?

@SpicyCaramel 4 жыл бұрын

This is a great video and i might try edit: im doing it today

@maplesyrup8297 4 жыл бұрын

How it went ?

@SpicyCaramel 4 жыл бұрын

@@maplesyrup8297 it went great it felt just like an xs

@maplesyrup8297 4 жыл бұрын

*_Ben Symons_* Alright thanks, cause I heard ppl mess up their cubes by doing it wrong, or because the magnets were too big and the colored caps wouldn’t fit anymore... I’m planning to buy a RS but I don’t know if I willing to magnetize it

@owaisdamad014 3 жыл бұрын

So what size magnets are nasasry

@nothingmaybesomthing2966 2 жыл бұрын

Does it work on the air

@fachryfadillah 3 жыл бұрын

Does 5x2 magnet can be fit in this cube? Im getting this cube in the future and i planning to use 5x2 magnet

@EZA_2007 Жыл бұрын

Me also

@OvereatenPotato 3 жыл бұрын

I have a bad gts2 m and want to magnetize my gan rs. Can I remove the magnets and put them in the gan?

@shuptoahmedlabib8276 10 ай бұрын

Did you use 4x2 magnet ?

@jacob.c433 4 жыл бұрын

When your here 12 hours early

@JulianLorenc 4 жыл бұрын

10 hours :)

@jamiechen9705 4 жыл бұрын

How

@jamiechen9705 4 жыл бұрын

You’re *

@kaikibestgrill4986 4 жыл бұрын

When your here 2 month early

@allanpham684 4 жыл бұрын

When you are 2 months+ late :|

@weidong2615 4 жыл бұрын

Great!

@gustavochiozza6465 4 жыл бұрын

Hi, thanks for you useful video. May I ask you if it is necessary to add magnet to the center pieces? I’ve seen a similar video but the guy addded 4 magnets on each central pieces an 2 more magnets on each edge pieces. 96 magnets in the hole cube. Do you think that is better? What strength do you recommend? 35N, 42N or 50N? Thanks again.

@twlcubing1578 2 жыл бұрын

35 N