How To: GE Washer Lid Lock Kit WH08X32697

Рет қаралды 68,944

Жыл бұрын

How To Replace: GE Washer Lid Lock Kit WH08X32697 www.appliancepartspros.com/ge...
Symptoms: washer won't start.
Tools: 1/4" nut diver, putty knife, flathead screwdriver, pliers, Torx 6 screwdriver or similar, small flathead screwdriver.
This GE made Washer Lid Lock Kit replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears, Kenmore Washers: WH01X27954, WH08X31577, WH01X24114, WH01X26114.
Buy the new Washer Lid Lock Kit WH08X32697 here: www.appliancepartspros.com/ge...
Most orders are delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros

Пікірлер: 83

@miguelugarte112 7 күн бұрын

One of the BEST repair videos i have ever watched. Excellent.

@appliancepartspros 7 күн бұрын

Thank you!

@datsva4ya 7 ай бұрын

THANK YOU FOR SHOWING ME HOW TO CHANGE THE LOCKING LID MY KIDS BROKE!!! THANK YOU BLESS YOU!!!🎉🎉🎉🎉❤

@appliancepartspros 7 ай бұрын

You are welcome! Glad we were able to assist you. If we can help you with anything in the future please let us know.

@clarencesamuels3569 7 ай бұрын

This instructor was very clear and reassuring. I ordered the part, put it on while the video played, and the machine worked fine. Plus, the new latch design was a definite improvement over the original one.

@appliancepartspros 7 ай бұрын

Glad we were able to assist you. If there is anything we can assist you with in future please let us know!

@charityg6761 4 ай бұрын

I followed your directions and everything went accordingly. I thank God for you and your channel. May God bless you and your family.❤

@appliancepartspros 4 ай бұрын

Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@cliffvictoria3863 Жыл бұрын

Thank you for the excellent instructional video. You saved me a couple hundred dollars. My GE washer had the "LID" notification scrolling. Installing the Lid Lock kit brought it back to 100% operation. Thanks again!

@elijahlopez5779 10 ай бұрын

Mine is doing that rn

@draconianoverlord7545 10 ай бұрын

So your saying I should get the whole lid lock replacement with harness , back to board ? I replaced the lid lock today had the black lock mech, ordered and delivered in 8 hours , and it still worlnt lock

@nathancarl4182 9 ай бұрын

Just used this video as a step by step and it worked like a charm. Both visually and informationally helpful. Thank You!

@appliancepartspros 9 ай бұрын

You are very welcome! Glad we were able to help you.

@joenerone8225 Жыл бұрын

This video was awesome for showing how to disassemble the washer. I was able to repair my switch by spraying it with contact cleaner followed by WD-40. Hope it holds up

@scottcowen903 10 ай бұрын

Just watched this and it was a huge help! Thanks! Up and running in about 30 minutes with a brand new lid lock harness.

@appliancepartspros 10 ай бұрын

Glad we were able to help you out!

@microminipimp1130 Жыл бұрын

Very helpful video and instructions i fixed my washer in just over a half hr and was back to laundry

@southernrocktopus 9 ай бұрын

Thank you so much. I used these instructions to replace the lid lock striker on a ge gtw720bsn0ws and it worked like a charm!

@appliancepartspros 9 ай бұрын

You are very welcome!

@mtctech1 7 ай бұрын

One of the best how-to videos I have ever watched. Thanks!

@appliancepartspros 7 ай бұрын

You are very welcome!

@raulacbo4469 Жыл бұрын

This video is SO helpful! Now we know what to check out--and how to do it. thank very much.

@billylewis4766 Жыл бұрын

Have you had any issues. Mine Started back doing the same thing.

@draconianoverlord7545 10 ай бұрын

Agreed, my model may be different. Hoping GE custy service gets back to me asap.

@terrywilliams5787 9 ай бұрын

Awesome job. Very helpful.

@appliancepartspros 9 ай бұрын

Glad we were able to help you out.

@arceacbo8488 Жыл бұрын

Wow complete details this video we thanks for DIY.

@billylewis4766 Жыл бұрын

Is yours still working? Mine Started back doing the same thing.

@billylewis4766 Жыл бұрын

This Video was so Helpful! Everything went well & worked for a few days.... Now it's doing the same thing with the new Switch.....Please HELP! After not bothering it for an hour or so it starts back up but will not spin all the water out.....This has been Horrible

@ArthurNetteler 2 ай бұрын

GOOD VIDEO... Thank you

@appliancepartspros 2 ай бұрын

You're welcome!

@draconianoverlord7545 10 ай бұрын

I was able to change the lid lock without taking anything apart, it can be reached by moving the tub over twards the lid lock and reaching under.

@appliancepartspros 10 ай бұрын

Glad you were able to remove the lid lock without taking anything apart. Some models maybe a little more trickery than yours and you may have to remove some parts for the appliance in order to get to the lid lock.

@noelitamarshall3836 11 ай бұрын

Big help

@appliancepartspros 11 ай бұрын

Glad we were able to help you out!

@lindseygonzalez3496 6 ай бұрын

I am having the same "LID" error when I try to run a load. I am oretty sure my lil one broke the latch on the glass lid as everyrhing else turns on and works. Anyways, it has been a few days and I desperately need to do laundry ASAP.....either with a lid lock "over-ride" or by ordering the part!! Besides wondering if I can bypass the lid lock/switch in order to run a load or two- I am also wondering if I need the entire part that you replaced in your AMAZING video since I doubt the plug and wiring harness (or whatever it's called) actually needs replaced?? Anyway, my Model # is: GE GTW685BSL1WS. I would truly appreciate any and ALL advice you can offer so I can get this fixed quickly!!! Thank you very much for this video and for your perfect instructions on how to replace the entire mechanism!!!

@appliancepartspros 6 ай бұрын

There isn't anyway to be able to override the lid lock, you would have to get whole assembly. The part number you would be needing is AP6027541. Below is the link to the part so you can look at it. If you have any questions please let us know! www.appliancepartspros.com/ge-lid-lock-harness-wh19x24141-ap6027541.html

@joearagona91 Жыл бұрын

Anyone have the part # to the board the switch plugs into? I accidentally shorted the switch out causing it to damage the board…..

@josemendez-fy7km 5 ай бұрын

Did you find a board . I think I need one too . I tried jumping the lid lock connection and I think I messed up the mother board . The lid lock is getting signal it’s just not engaging the locking mechanism

@davidchristian1717 3 ай бұрын

I just replaced the lid lock in my GE Profile washer just like this and now it won’t even engage the lock and the display keeps flashing “lid” message. I’ve did the reset method and after entering diagnostic mode it’s showing error 23 which is for the lid lock mechanism which I just replaced. Only thing I didn’t replace was the latch itself. Thoughts???

@appliancepartspros 3 ай бұрын

What is the model number of your washer and we can look into this for you.

@draconianoverlord7545 10 ай бұрын

I have a GE top load quiet wash. replaced lid lock , did not fix. How can I force it to run a wash lid is closed wont work

@appliancepartspros 10 ай бұрын

Have you checked for loose or damaged wires? Have you recently had a power outage? What is your model number of the washer?

@RavenGirl333 Жыл бұрын

Is the lid glass on this model? Does it often break?

@cliffvictoria3863 Жыл бұрын

Yes, the lid is strong glass. We have had our washer for 5 years with no problems with the lid glass. We did need to have a circuit board installed under warranty and I just completed this lid lock repair. Otherwise the washer has worked well.

@jacielreyna8319 5 ай бұрын

How do you trouble shoot the switch lid can it be omm out

@appliancepartspros 4 ай бұрын

That switch should have continuity coming to it.

@hectorlopez-oz5wn Жыл бұрын

I already replaced the lid lock, but the washer is still the same. What happened?

@billylewis4766 Жыл бұрын

Did you figure out what the problem was? Mine us doing the same thing. I think it's in the setting...It doesn't like Super load on Speed Wash. Seem to work better on Medium or large on speed wash. Mine love to rest an hour or two between washes.....I don't think i will ever buy another GE product. I can't stand a ticky appliance.

@eastend3865 Жыл бұрын

Did u find any solution? Im having the same problem. Just ordered a control board see if that fixes the problems.. ran test nd it detected the lid switchh not working. Replaced still the samee.. hope this board workss...

@rayhaglerpiano 9 ай бұрын

Control board

@clarencesamuels3569 7 ай бұрын

Did you change out the latch also?

@josemendez-fy7km 5 ай бұрын

@@eastend3865 did the control board fix your problem

@carlthornton3076 Жыл бұрын

Great

@luzdealba1540 10 ай бұрын

How do I know which part is damaged? Know that my machine stopped working?

@appliancepartspros 10 ай бұрын

Do you have any power coming to the machine at all? What is your model number?

@lindamedina4104 5 ай бұрын

How do you order to part,can you send link

@appliancepartspros 5 ай бұрын

What part are you looking for? Do you happen to have the model number of the washer?

@jhodgson58 6 ай бұрын

My washer gets stuck on SeNsInG and will not spin or fill. Is this a result of a bad lid lock switch?

@appliancepartspros 6 ай бұрын

What is the model number of your washer and we can look into this for you.

@jhodgson58 6 ай бұрын

@appliancepartspros PTW700BPT0DG. Last night we unplugged it and plugged it back in and it wouldnt turn back on.

@appliancepartspros 6 ай бұрын

Have you recently had any type of power outages? Do you happen to have a multimeter?

@jhodgson58 6 ай бұрын

@@appliancepartspros no, we have not. I do not have a multimeter. Could probably obtain a cheap one.

@appliancepartspros 6 ай бұрын

Have you checked the breaker to make sure that it didn't trip?

@ulisses1124 5 ай бұрын

I replaced the Lid lock kit step by step but now my washer won’t turn on, it just makes a sound as if it wants to spin but doesn’t spin any recommendation much appreciated

@appliancepartspros 5 ай бұрын

Have you recently had any type of power outage? What is the model number of your washer?

@ulisses1124 5 ай бұрын

GTW460ASJ5WW- haven’t had any problems with power outage.

@josemendez-fy7km 5 ай бұрын

I have the same issue . I just changed mine yesterday.

@josemendez-fy7km 5 ай бұрын

With the old lid lock I would get a clicking sound .

@josemendez-fy7km 5 ай бұрын

No sound with this one just the hesitation of wanting to spin …

@sjduskin 9 ай бұрын

One thing people may notice is that the old switch and the old bezel are NOT available any more. This new switch is chearper and comes with all the parts you need to replace your old one. Now more spring loaded level on top.

@appliancepartspros 9 ай бұрын

If there is anything we can help you with please let us know.

@billylewis4766 Жыл бұрын

Back Again.......I have Notice it works better on (Normal) Setting....Not Speed Wash....It seem to do better with (Resting) between Loads......I just need to wash & be Thru for the day though.......I Am Not A GE Fan anymore.....although 80% of our Appliances are GE....Think Seriously about replacing them one by one when needed with Whirlpool.

@TheBarberGuy 4 ай бұрын

Hello, I’m hoping you can help me. I have the same washer that is in the video. I replaced the lid lock assembly and my washer is doing this thing where it is locks and operates as it should but then you hear the latch clicking and then the washer ends like it is finished but remains locked. It keeps doing this even though I have unplugged it and even manually unlocking it and trying another load. It will fill and run for about 5 minutes and randomly will start making a clicking sound where the lid lock is and again end and make the sound that the load is finished even though it’s still full of water and locked. Please help.

@TheBarberGuy 4 ай бұрын

The washer model number is PTW600BPRDG

@appliancepartspros 4 ай бұрын

Have you recently had any type of power outages?

@TheBarberGuy 4 ай бұрын

@@appliancepartsprosi have not

@juliemills9240 7 ай бұрын

Can you just leave the kids lock unplugged and NOT have to deal with it anymore? I tried to disable it and accidentally broke it and now i can't get it to work at all...😭i HATE this lid lock.

@appliancepartspros 7 ай бұрын

What is your model number of your machine?