How to get a better image from your fpv cam settings

No video

How to get a better image from your fpv cam settings

Рет қаралды 24,080

6 жыл бұрын

Fpv Camera settings are often over looked. Even if they are supposed to come out of the box setup already. I suggest using some of these tips to better dial in your camera, cause after all you can't fly fpv without it!
Subscribe to my podcast teamfailsafe.li...
/ konastyfpv
www.ethixltd.com
teamfailsafe.com
vid.me/Konasty
Contact/Mailing
konastyfpv@gmail.com
3380 La Sierra Ave #104-150 Riverside, CA 92503
CAMERA GEAR
Main Camera - amzn.to/2iK2DDZ
Wide lens - amzn.to/2id4R1p
Mic - amzn.to/2iJQMWi
On Camera Light - amzn.to/2iK4Ija
SD Card - amzn.to/2iJR5QW
GoPro SD Card - amzn.to/2iK16Oj
Bendy Tripod - amzn.to/2iiQYNe
Ball Head for Bendy Tripod - amzn.to/2hxqtoG
Regular Tripod - amzn.to/2id8sfW
Small Camera - amzn.to/2iJUOxY
Cinema Camera - amzn.to/2iKlDpK
HD Flight Cam - amzn.to/2iK7a9c
Lens protector - amzn.to/2iKsf7z
Wearable Gimbal - amzn.to/2iJS4Rd
Chest Mount - amzn.to/2idbBwq
Selfie Stick - amzn.to/2icYnzE
Small Tripod - amzn.to/2hxsp0B
Think Tank Session Bag - www.thinktankp....
GOGGLES
Fatshark Dominator HD - amzn.to/2idkgiB
Mad Mushroom Antenna - amzn.to/2ivwZuJ
8dbi patch Antenna - amzn.to/2iK4ZCC
Laforge V2 - amzn.to/2iKdY6R
MINI QUAD GEAR
Konasty 6' Cougar Frame
6" Motors - Cobra 2206 2100kv
6" KISS FC - amzn.to/2iKbDsT
6" KISS 24A - amzn.to/2inoVyH
6" TBS 25A - amzn.to/2in7uhP
Props- HQ 6x4x3/6x4.5x2
Foxeer Arrow V3
Fpv Cam lens - amzn.to/2idq4s9
TBS Triumph CP antenna - amzn.to/2ivxhl3
TBS Unify Pro 800mW VTx - amzn.to/2iKt943
RADIO
FrSky QX7s www.horusrc.co...
Radio Stand - amzn.to/2iZaCgu
TBS Crossfire - amzn.to/2iJXn2Y
TBS Micro Receiver - amzn.to/2iJXXOm

Пікірлер: 92

@EricKonasty 6 жыл бұрын

!This is not an advertisement! There is no links or me directing someone to buy anything just trying to give and opinion on the camera I use and help on settings for others.

@rebelquadronfpv1065 6 жыл бұрын

Eric Konasty great work with declaration of any conflicts.

@EnglishTurbines 6 жыл бұрын

The Runcam has a dedicated 2 pin socket just for the Cameras OSD...It comes with a 2 pin lead, just like the Foxeer...Why would you think it did not have a dedicated OSD lead..?

@Sir_Brennan 6 жыл бұрын

Skip to 5:19 for the camera settings. The first 5 minutes is a Foxeer advertisement. ;)

@arnerrvik7586 6 жыл бұрын

So basically, to get a better image from your camera, adjust the settings to your liking.. You're a genius, man!

@EricKonasty 6 жыл бұрын

Uhhh negative. Make sure you have the setting I said to have on but adjust the color and contrast to your liking.

@cdpd3 6 жыл бұрын

The eagle 2 comes with an extension cable for the OSD port just like the foxeer. I use it on both my quads.

@mrpistachios 6 жыл бұрын

the mini swift also came with the extension

@EricKonasty 6 жыл бұрын

+MrPistachios yeah that’s cool I’m glad they added it I still don’t like it being a separate plug though

@EricKonasty 6 жыл бұрын

+Jon C preference

@libertyfpv6936 6 жыл бұрын

Most of the camera models from runcam come with the extension. They decided to make it a plug because not everyone needs it on all the time. I also like the controllers for the runcam better. its a nice toggle instead of a board.

@BASHERSUNITED 6 жыл бұрын

It's exactly the same and the runcam dongle is way better than the exposed on from foxeer. It's also weird that you can't see scraggle in the eagle. The only issue I had with the eagle was the latency and they fixed that in the eagle 2. Maybe you turned off WDR on your eagle? The foxeer monster seemed way too dark. I used the mini Swift now because it seems to balance out latency with image quality and weight.

@Kikerumbo 6 жыл бұрын

Runcam cams come with the OSD "pigtail" too... At least Eagle 2 does. Good tutorial for FPV cameras. Not many out there.

@halfdeadkc6030 6 жыл бұрын

Would u do the same with the sharpness in your goggles??

@picklerick2324 6 жыл бұрын

Man thanks for that I have so many different cams for different kwads and this helps a lot

@libertyfpv6936 6 жыл бұрын

Foxeer is killin it with the package presentation 👍. Good video! I think a lot of people forget about adjusting their fpv cam settings.

@EricKonasty 6 жыл бұрын

+LIBERTY FPV thanks dude!!

@1tomahawk1999 6 жыл бұрын

on the runcam swift 2 i also comes with one of those connecters to change settings just that it is able to come off not part of the whole port. In some situations it is better but you can just use it the way the foxeer does

@pitviprplays9794 6 жыл бұрын

Just some info you may not know based on this video: There are Flight controllers out and coming out that are utilizing the Betaflight functionality of camera settings control through the Betaflight OSD. One specifically is the CL_Racing F4 "S"

@FlipsideRC 6 жыл бұрын

Nice video Bro! I'm definitely going to give these settings a try. loved the last podcast. keep em Rollin bro.

@EricKonasty 6 жыл бұрын

+Flipside FPV thanks man appreciate it!

@titowaps555 3 жыл бұрын

Thanks to the tutorial 👌

@youeladamas7840 6 жыл бұрын

yeah I like the foxeer board still need to do cam control mod. if it was just one wire it would be done but have to find a resistor right value lol with cmos cams cut back the dnr digital noise reduction I think its called it can helps see branches on some cams. llol fly in all blk/wh for a classic feel and faster brain calculation of image lol theory not fact but might make some have better response time.

@3rd_coast223 6 жыл бұрын

Great video...can you give us a quick video of your dvr in flight? I would like to see how it transitions and colors look with your setting.

@EricKonasty 6 жыл бұрын

+3rD_Coast FPV Check our my long range video I just did a couple vids back :)

@3rd_coast223 6 жыл бұрын

cool yeah ill do that.

@tensor3d 6 жыл бұрын

Your wearing a FrSky shirt, and a Spectrum hat. What gives? Great setting tips. Always enjoy your vids!

@EricKonasty 6 жыл бұрын

+Brett Stewart Thanks. If you look close it’s not a spek hat 😊

@toastedmangoflight 6 жыл бұрын

Nice! Thank you!

@brianbutcher7409 6 жыл бұрын

Great Video Eric, I agree with everything you said, Concerning the contrast, if you drop it a bit lower, around 104 -110 then you can fly directly into sunlite without having your image completely washed out. This is a trick I learned from FinalglideAus (Chad) from Rotor Riot. Also it is worth mentioning that replacing the lens with a GOPRO lens imoproves the colors and make the image look brighter and crisper to me. I usually have a few of these on hand, they run about 6 to 7 bucks and its nice in case you smash a lens during flight. They also come in various FOV 120 deg up to 150 deg which are the ones I like so I can uptilt the camera to 45 or 50 deg and still see the ground for landing.

@jesusgalicia3272 6 жыл бұрын

Ohh man, love the viper at the back

@EricKonasty 6 жыл бұрын

It runs. Dude wrecked it on the drivers side a bit and now is selling it.

@sketchness8400 6 жыл бұрын

The Runcam colour saturation is too much for me. Been using the Foxeer 1177 in my Vortex 250 and its never let me down yet. Foxeer Micros next on my hit list.

@KingFPV 6 жыл бұрын

Nice review man!

@cameronjacobs3144 6 жыл бұрын

The runcams now come with a removable pigtail for the osd

@shattereddnb3268 5 жыл бұрын

I built a tiny whoop track in my basement with some LED and UV gates, but I´m having huge problems with being blinded by the lights. Can you make adjustment to the stock cameras on quads like the UK65, HB65 or Beta65?

@BariFPV 6 жыл бұрын

Man, I got 5 of these camera and the weird thing I notice they all have a slightly different result even when I'm running same settings on them. At times I think my standard HS1177 have a better result.

@WanderinWizard 6 жыл бұрын

you can leave the cable in on the run cam to control the osd btw...

@EricKonasty 6 жыл бұрын

+Mellow Minion I still don’t like that it’s a separate plug but that’s cool the new ones have it

@FarmerFpv 6 жыл бұрын

Rock A Handlebar Mustache Eric!

@AlexNZL 6 жыл бұрын

Im using the foxeer monster at the moment. I had to get a hs1177 case for it so it fit my frame though. i keep forgetting to take the controller with me to change the settings. its so washed out at the moment.

@ronalddeveney1879 6 жыл бұрын

Eric, did you do this just for me? I have only used settings the camera shipped with.

@EricKonasty 6 жыл бұрын

+Ronald DeVeney I might have 😉

@rccandy 6 жыл бұрын

That limited edition snap back teamfailsafe tho! haha

@jtj250 6 жыл бұрын

Camera control. . Great beta flight feature.

@OkiFPV 6 жыл бұрын

I guess everyone has their preferred brand. I have both brands & honestly, get a good model, & the only difference is the logo.

@mfpv_detroit8182 6 жыл бұрын

What up fam great video

@ShelbyVoll 6 жыл бұрын

Good stuff snookems....smooches

@FreshlyFried 6 жыл бұрын

So you don’t like runcam yet they have the same plug and control board?

@FreshlyFried 6 жыл бұрын

Runcam comes with the same extension wire.

@dylanlikeavillan5165 6 жыл бұрын

I flew a new foxeer stock setting and motion was on, puts all these squares all over the screen and flashes a little man running, I was grinning the whole flight

@gottdirtt 6 жыл бұрын

You didn’t mention if the arrow is a 4:3 or a 16:9 or both.????

@amisoftau2659 6 жыл бұрын

It's 4:3

@bennieleip579 6 жыл бұрын

I have this foxeer arrow v3 (my first fullsised fpv cam) and if there is low sun over the trees and i look into the sun i cant see annything , is that normal or can i do something about that?

@bennieleip579 6 жыл бұрын

SKIDOOSH to bad that i didnt hear that earlyer before i buyed him but i changed the settings and hoping its better next time but thnks for awnsering👍🏻

@EricKonasty 6 жыл бұрын

Did you do your research before saying it forsure a know fact cause I don’t have that problem. 😉 😊

@OGTylerP 6 жыл бұрын

where do I turn down the pink eye option??

@OGTylerP 6 жыл бұрын

and turn up the brown eye....

@EricKonasty 6 жыл бұрын

+Tyler Penny lmao 😂😂

@eastsidetony8809 6 жыл бұрын

Thanks for the vid dawg this is how us noobs learn

@chrismeyer8315 6 жыл бұрын

Dude! you have to do the Beta flight Control Hack!

@EricKonasty 6 жыл бұрын

+Chris Meyer it’s for another episode :)

@chrismeyer8315 6 жыл бұрын

I did the mod on a run cam eagle and a swift. It's a dream! Should work on the Foxeer aswell. From the look of things I like the Run cam remote better...

@EricKonasty 6 жыл бұрын

+Chris Meyer yeah I’m sure it does! :)

@tushartyagi9440 6 жыл бұрын

Chris Meyer did you add a resistor on the eagle, what were your settings for camera control in cli. I mean, which values do you have when you type- 'get camera_control' in cli. It would be great if you could share

@tushartyagi9440 6 жыл бұрын

Chris Meyer i have the eagle 2 but could not get camera control to work.

@AlbeeSoaring 6 жыл бұрын

I have this same camera. I have not been able to get it to record sound. Do you have this same problem?

@EricKonasty 6 жыл бұрын

+AlbeeSoaring I don’t. How do you have it setup?

@AlbeeSoaring 6 жыл бұрын

Wow thanks for responding so fast. I have tried it with my goggles and with a alternate VRX for android. I havent been able to get any sound from it. I couldnt find any adjustment for it or even a hole for the mic. I have a QAV210 and just have it attached to the quad by the camera plates that come with the frame. I know my goggles will record sound cause I have recorded a friends flight with a runcam and mic.

@EricKonasty 6 жыл бұрын

+AlbeeSoaring do you have the audio out from the camera hooked up to the vtx right? Also is that vtx capable of audio in

@AlbeeSoaring 6 жыл бұрын

Eric Konasty the vtx says it is capable. I will double check the wiring. I am using a foxeer switcher.

@amisoftau2659 6 жыл бұрын

One thing you might want to check is; which audio channel (L or R) the camera, and the vtx are using. Some use left, and some use right. If they don't match between camera and vtx, you'll get no audio.