How to get out the broken tire valve core

Рет қаралды 6,943

AOE

Жыл бұрын

In this video I explain how to get out the stuck broken tier valve core by using screw driver

Пікірлер: 10

@franciscoescobedo9699 Ай бұрын

Thank you very much you are genius God bless you

@AOE5578 Ай бұрын

GOD bless you too, thx

@drmdabdullah 3 ай бұрын

Nicely done brother. You can also use a Number 10 tork screw to remove the nipple of the valve stem. Nicely done

@alexisvega9987 9 ай бұрын

Thank you very much my friend

@emergencylowmaneuvering7350 2 ай бұрын

Just use a small torx like a T10 with the hole in the middle kind. But 1- put a penetrant lubricant first. then 2- blow some air in there before to blow off the dirt or corrosion out of the way. 3- Then the Torx after pressing it all the way in.

@PatelAkshay 10 ай бұрын

Thank you very much

@AOE5578 Жыл бұрын

I had the tire valve core stuck strongly in side the valve because of over tightening which was not possible to take out and by this method you can force the broken core to turn open using screw driver with force

@ruiwu3604 Жыл бұрын

Thanks ❤

@RogerPack 6 ай бұрын

clever. Do you have to angle the screwdriver? Didn't seem to immediately work for me...

@AOE5578 6 ай бұрын

i hope by now it is solved. You need good screwdriver , (edges new )and you need to push hard while rotating and this will make open by friction force , i inserted in any possible gap