This video shows you how to use the Microsoft XBox 360 power adaptor DPSN-186XXX as 12V 16A Power supply for any purpose you like. For example I will be using it to charge Lipo Battery .. Please subscribe: / @todotips
Пікірлер: 96
@TheDreadedRearAdmiral4 жыл бұрын
Thank you too. Very clear and simple, the way these tech videos should be. I was just given one of these power bricks yesterday; found it while cleaning out the lower level of a house.
@ToDoTips4 жыл бұрын
Glad it helped
@Gyppor4 жыл бұрын
I just found one of these in the trash to use exactly for the purpose you describe. KZfaq is awesome and so are you! Thanks!
@ToDoTips4 жыл бұрын
So are you. Good to hear you found it useful.
@davidedamiani53314 ай бұрын
@@ToDoTips I'm in the exact same situation, I found one of these psu in the trash and wanted to use it for my lipo charger. So I should connect blu with red and then yellow and black go to the charger?? Hoping for a response Ty so much
@col16642 ай бұрын
Brilliant video. Well explained and simple enough for an old git to understand......
@ToDoTips2 ай бұрын
Glad you enjoyed it
@vadimbalin40872 жыл бұрын
Thank you! You’ve saved my time) I also got it for LiPo charger.
@dinskiy3 жыл бұрын
Fab. You just saved me an hour of messing about. Thank's buddy.
@ToDoTips3 жыл бұрын
I am glad it helped. Please subscribe. I really appreciate it.
@davidedamiani53314 ай бұрын
@ToDoTips I'm in the exact same situation, I found one of these psu in the trash and wanted to use it for my lipo charger. So I should connect blu with red and then yellow and black go to the charger?? Hoping for a response. Ty so much❤
@alanpayne14424 ай бұрын
Very useful video. My spare Xbox PSU has a 12volt high 12.1amp current which can be used for many projects.
@Bennjammin3 жыл бұрын
Thanks for the video! Helped me not connect the wrong wire to blue.
@aramilhernandez55156 жыл бұрын
Thank you 🙏 very much for that amazing Quick video it helps a lot.
@ToDoTips6 жыл бұрын
You are welcome. I am glad you found it useful.
@TheBlackFoxMaster5 жыл бұрын
Helps a lot! Thank you very much! 🙏
@ToDoTips5 жыл бұрын
You are welcome. Please subscribe if you haven't done so. I appreciate your subscription. I need it to reach 1000
@Gnuk80003 жыл бұрын
So simple, thank you!
@JKKV_100 Жыл бұрын
Thanks man, just saved me a bunch of time and hassle!
@ToDoTips Жыл бұрын
Glad it helped!
@krismorey3 жыл бұрын
Exactly what I was looking for.
@ToDoTips3 жыл бұрын
I am glad it helped. Please subscribe. I really appreciate it.
@HODFOURTWENTY2 жыл бұрын
I was wondering if I could take the cable end off of the "xbox one power brick" and rig it to this one "the xbox 360 brick" it needs 12 volt to turn on I'm having difficulty finding one can't order a new one so might take it apart to try I can always put it back together the brick gets really hot when I'm running my 360 and I'm worried the xbox one is too much for it can't buy a new console either until my tax return in 3 months just paid for new month of gaming 2 games I really wanna play
@antresia.97234 жыл бұрын
I have a black power brick.I want to connect the dc brushless fan AUB0712HH DC 12v 0.40A to the negative and postive output.what color is the wire.
@ToDoTips4 жыл бұрын
Brushless motor should have 3 wires. it needs Electronic Speed Controller. ESC. If you don't have it. this will not work. This is just a power source. if your motor has just 2 wires, then I have shown the positive and negative in the video.
@danbishop40355 жыл бұрын
Thanks friend...just what i needed.
@ToDoTips5 жыл бұрын
You are welcome. Please subscribe if you haven't done yet. I appreciate your subscription. I need it to reach 1000 subscribers
@anuarjumri19502 жыл бұрын
Very clear and usefull explanation. 👍🏻
@ToDoTips2 жыл бұрын
Glad it was helpful!
@goonluv Жыл бұрын
Nice no nonsense video. Thank you
@NadeemBaloch-wd1ql Жыл бұрын
Thankyou so much bro u solve my problum❤🙏
@kuahtongseng26276 жыл бұрын
very very use full sir ..thank you
@ToDoTips6 жыл бұрын
you are welcome. 👍
@ka2pbo Жыл бұрын
Very well done! Thank You
@grde37fds5 жыл бұрын
omg thank you it was so helpful in making my homeade car battery charger.
@ToDoTips5 жыл бұрын
You are welcome. I am glad you found it useful. Please subscribe if you haven't done yet.
@dremaboy7775 жыл бұрын
thanks for the vid. it helped me.
@ToDoTips5 жыл бұрын
You are welcome. Glad to hear that. Please subscribe if you haven't done yet. I appreciate your subscription. I need it to reach 1000 subscribers.
@antresia.97234 жыл бұрын
Can i cannot a dc motor to it or a weak dc brushless fan.0.25 amps dc 12 volts cooling master high performance.
@ToDoTips4 жыл бұрын
Yes you connect up to 64 motors with 0.25A current need.
@eiurandelfkhan22994 жыл бұрын
Will you please try load test on this device? Because the one I have turns red if you put load on it like 12v motor @ 24w ~ 30w. I don't know why.
@ToDoTips4 жыл бұрын
it must be defective or it gets Overloaded and protections shuts it off..
@M7XCB6 жыл бұрын
I use this power supply for run my ham radio it would be nice if there was any mods to get the volt up to 13.8 v rather then 12 volt
@ToDoTips6 жыл бұрын
this is sealed design. I have not opened it. Don't know if it is possible.
@erik.landen4 жыл бұрын
Thanks for this one, could you connect a switch between red and blue to make it ON / OFF ?
@VladimirVinokurov4 жыл бұрын
Why not.
@ToDoTips4 жыл бұрын
You are welcome. Yes you can. Please subscribe and that is the best thank you for me.
@gino32863 жыл бұрын
Thank you very very much indeed. I am buying one to power some little car audio stereo amps i am testing on my home system. If i understand well the wires with the same colour can be connected together ? (of course connecting yellow with yellow and black with black) Moreover i see that you have cut out the ferrite bead ... better to keep it or not ? thank you very much indeed again. Kind regards, gino
@ToDoTips3 жыл бұрын
you are welcome. Yes the like colored wires should be kept together. the beads reduce noise on the line. keeping it is better.
@gino32863 жыл бұрын
@@ToDoTips hi thank you very much indeed for your very kind and helpful advice I understand that soldering them together allow for the max current delivery available from the psu ? Kind regards gino
@jirkacapek5 жыл бұрын
Question - when I connect blue with red, the led doesn't go green like in your case, but goes red and there is nothing between black and yellow. Is the supply faulty, or do I do anything wrong?
@ToDoTips5 жыл бұрын
I am not sure. it seems it goes OFF. this possibly would happen if the output is short circuited .
@misterpurist10405 жыл бұрын
just what i was looking for.. thank you very much
@ToDoTips5 жыл бұрын
You are welcome. Glad to hear that. Please subscribe if you haven't done yet. I appreciate your subscription. I need it to reach 1000 subscribers.
@yusifsuleiman55029 ай бұрын
Thank you for this wonderful explanation. Please, why mine is measuring 10.7volts
@BeeHiverson7 ай бұрын
The measure 10.7 volts when they are f****d up. So I’m guessing that’s what you’re dealing with.
@Fosgen2 жыл бұрын
Works for me thanks. Bought it so cheap, nearly free. Nice 200W at 12V.
@killerheart18926 жыл бұрын
Using this to power 12v leds around my room your a life saver
@ToDoTips6 жыл бұрын
I am glad you found it useful. Please subscribe.
@carlosdavila4164 Жыл бұрын
excelente saludos desde colombia
@joseguevara1842 жыл бұрын
Can I use an adapter to raise voltage to 24V for an audio amplifier?
@ToDoTips2 жыл бұрын
This outputs only 12V and you can do what’s you want with it
@MACYNET3232 жыл бұрын
Would be nice also show how add potentiometer for adjust voltage output
@ToDoTips2 жыл бұрын
You can’t adjust it. It would need totally different design
@dogacla Жыл бұрын
Thank you bro.
@adamtopolofski98456 ай бұрын
thanks bro
@4manS1nghАй бұрын
Top lad👌
@puissance666roipacole45 ай бұрын
CAN YOU HELP ME PLEASE, USING AN OLD XBOX 360 POWER SUPPLY TO CONVERT A 12V CORDLESS DRILL AFTER PLUGGING ALL YELLOW TOGETHER, ALL BLACK TOGETHER AND RED AND BLUE TOGETHER. THEN I PLUG BLACK WIRES TO NEGATIVE OF THE DRILL AND YELLOW WIRES TO THE POSITIVE WHEN TURNED THE DRILL ON IT SPIN FOR A FEW SCONDS AND THE POWER SUPPLY BECAME RED. I UNPLUG IT TO RESET IT, IT KEEP DOING THE SAME THING.
@ToDoTips5 ай бұрын
Very hard to read ALL caps. It is screaming 😱
@davidedamiani53314 ай бұрын
Lol
@brucehardwick79286 жыл бұрын
thank you , try it on my slot car track :)
@ToDoTips6 жыл бұрын
you are welcome.
@przemogoli88117 ай бұрын
Jak uruchomić Zasilacz A13-203P1A konsoli Microsoft Xbox One 1540
@4wheelsbyDavid2 жыл бұрын
Thank you very much 👌👌👌
@ToDoTips2 жыл бұрын
You are welcome. The best thank you for me is to subscribe to my channel. Thanks
@williamaguirre9365 жыл бұрын
Toma tu like héroe 😁🤗
@ToDoTips5 жыл бұрын
Eres muy amable. Gracias. Por favor, suscríbete. Lo aprecio.
@DjDj-zr2wy4 ай бұрын
Thanks! 👌🙏🙏
@ionutzionutz7106 Жыл бұрын
Videoclipul tau m-a ajutat sa conectez un adaptor similar CPA09-011A la un reflector led. Firele au aceleasi culori. Multumesc, prietene
@angelfpv48255 жыл бұрын
i have a grey wire on mine what is it?
@ToDoTips5 жыл бұрын
If you can turn it ON, don't worry about it. Perhaps you have two Ground wires.
@angel_alejo123 жыл бұрын
Can you connect 2 power supplies for more amps?
@ToDoTips3 жыл бұрын
Yes you can
@angel_alejo123 жыл бұрын
@@ToDoTips how do you do that?
@ToDoTips3 жыл бұрын
Lol 😂 you asked. + to + and - to -
@angel_alejo123 жыл бұрын
@@ToDoTips well sorry im not a expert about this, i didnt know if u used one positive from one and a negative from the other, i thought i could probably just connect them color to color just wanted to be sure
@DannyPeach3 ай бұрын
How long to change a car battery
@ToDoTips3 ай бұрын
It is not about the time. You set the charger to 13.8V and set the current to the recommended current like 5A or 10A and for example your car battery capacity is 50A/h ans you and your charger can supply 5A, then 5x10=50A so it will take 10A to charge . But generally you don’t have co control over time. It will stop automatically.
@goonluv Жыл бұрын
Subbed
@ToDoTips Жыл бұрын
Thanks
@Manuqtix.Manuqtix3 жыл бұрын
Is it possible to make it 15 volts?
@ToDoTips3 жыл бұрын
No. But you can feed the output of this to input of a boost converter like this kzfaq.info/get/bejne/bM99Zppp37mxeZs.html to get huger voltages , this is my other channel focusing on electronics and robotics
@Gocast2 Жыл бұрын
thanks! you sound a lot like another KZfaqr named robojax 😅