How to get the Best Sound from a Full-Range Driver

  Рет қаралды 106,274

Toids DIY Audio

Toids DIY Audio

6 жыл бұрын

Are you interested in speaker building? If so a full range driver is typically a great place to start. And although, you can just stick it in a proper sized enclosure, if you want to get the best sound out of it, then you will want to watch this video.
⭐⭐⭐Buy this Speaker and Crossover components⭐⭐⭐
US and Canada: parts-express.sjv.io/jW7oZb get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Buy this Speaker from Amazon: amzn.to/2MiUJnA
Download X-sim: libinst.com/Xsim/XSimSetup.exe
Baffle Step Basics: • How to Design a Baffle...
DIY Plans: www.toidsdiyaudio.com/shop
🔥 Where to Buy Speaker Parts and Kits:
US and Canada: parts-express.sjv.io/jW7oZb get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPhKYD
Car Speakers/ Home Audio and electronics: howl.me/cg5oP9UKd1Z
🏠Get Whole House Audio:
Arylic: bit.ly/2wFUUQ4
🍿Theater Seating
Valencia Theater Seating: bit.ly/3Jbagjm
📄Speaker Plans: toidsdiyaudio.com/shop
🎙️Sound Advice Podcast: anchor.fm/sound-advice8
🎧Buy Audiophile Headphones: howl.me/cg6GDjmAHzS
🆓Get it with Prime - Free for your first 30 days: amzn.to/326cZqe
FREE Audio Books for 30 days from Audible: amzn.to/3a7lBS9
👋Connect with Me:
www.toidsdiyaudio.com/forums
🤝 Support:
Patreon: / 123toid
Disclosure: This channel is viewer-supported. When you buy through links on my site, I may earn an affiliate commission. I only recommend products I would use myself and all opinions expressed here are my own.

Пікірлер: 139
@NicB-Creations
@NicB-Creations 6 жыл бұрын
This is great, I was really into speaker design a few years ago but I forgot so much these video's are saving me a lot of time refreshing my memory.
@Justwantahover
@Justwantahover 4 жыл бұрын
That is a good quality FR driver. But with cheapies you usually get a rolling off after 10 khz, especially the larger cheap FR drivers. They are a bit "muffly". To fix that I do exactly what you said in this video (an inductor in parl with a resistor) but I also add a 1.5 mf cap in parl with the other two components. It makes cheap FR drivers sound like way more expensive ones. I came to the 1.5 mf through experimenting and listening. I tried 2 mf and 1 mf and found that 1.5 is best. It "boosts" treble without making them sound "chiffy" (an inherent problem with FR drivers). The trick is to go higher than the "chiff" so the "chiff" won't be let in but the upper "tizz" is let in..
@ganymedes73nmy94
@ganymedes73nmy94 Жыл бұрын
Thanks for your information on the baffle step, loved it. If one goes fullrange, consider relatively cheap and easy to build enclosures like TQWT/ML-TL/ML-Voight /TWTD sweet spot 4" - 5" driver. From 6" and up you get a lower Fs
@RyKoMedia
@RyKoMedia 11 ай бұрын
Greaaaaat info, cant believe this is the first time seeing your channel, i look at DIY audio stuff alll the time..
@fullere
@fullere 6 жыл бұрын
Perfect timing, I'm just about to start a small bluetooth speaker build using a PS95, excellent video and great channel, thanks! :)
@anthonycruz8011
@anthonycruz8011 6 жыл бұрын
fullere nice dude post a video about it and I'll subscribe
@markceci9896
@markceci9896 3 жыл бұрын
Thanks for the video. It seems like this whole process lowered the overall mid and treble to match the base. Overall sensitivity went down a fair amount. I'm sure it will sound more balanced. I always hate adding crossover components to a fullrange driver, unless it is high pass to limit excursion.
@paulsochinfan
@paulsochinfan 8 ай бұрын
Thanks so much, this and the other part of the video explain my long wait mystery of the functions of the components in the crossover. Thanks thanks thanks!!!
@-IE_it_yourself
@-IE_it_yourself 2 жыл бұрын
thanks looking forward to trying this
@BlaineShillington
@BlaineShillington 4 жыл бұрын
If you haven't tried it, I much prefer Vitruix CAD to xsim. Thanks for the video!
@efenditube
@efenditube 3 жыл бұрын
Thank you ! Instant sub 👌🏼
@mkshffr4936
@mkshffr4936 Жыл бұрын
Generally speaking subs or helper woofs would be used with small FR drivers but quarter wave cabinets are also often used to deal with this issue.
@CarWash811
@CarWash811 5 жыл бұрын
I have VIFA TG9FD10-04 3.5" full range drivers in the sealed box + I use one 8" subwoofer. I really like how these full range drivers sound without any crossover other than the mild 100Hz high pass filter. Trying to get any bass from these tiny speakers is pointless for me. I have room what eats bass. So I need subwoofer even with large bookshelf speakers. Only problem with these full ranges is that they can sound too forward with some recordings and they definitely need to be aimed towards listener. What I mean is that I don't think that I need this kind of correction. However I love your videos and maybe I am too sceptical :)
@JiveDadson
@JiveDadson 5 жыл бұрын
Put a high pass filter on the full range at about 90 Hz and use a sub. Preventing the full range driver from flapping ineffectually in the deep bass greatly reduces distortion. I disconnected the baffle step circuit on mine in favor of a good 31 band equalizer. That can take care of baffle step, floor bounce, a live or dead room, and imponderables.
@a64738
@a64738 5 жыл бұрын
I was just thinking it would be much better to just use a good equalizer them mess around with that stuff. My pc is the sound source anyway so there is lot of free programs with really good EQ and my Hardman Kardon AMP can also do autmatic EQ (but it is real bad for the hi end so only really usable for bass and sub) .
@paulsochinfan
@paulsochinfan 8 ай бұрын
Good idea too, will it sound better than passive crossover?
@Gof3
@Gof3 Жыл бұрын
I enjoy watching your videos. I plan to make medium sized boxes and keep them on the appropriate stands, but those are minor concerns. The idea of a DIY speaker with full range drivers has always interested me, especially since I've had the opportunity to listen to Tanoy (although they have a coax radiator), Pearl Audio, etc. I see that everyone is mostly concerned with bass reflex port solutions or pipe systems. I am interested in a closed box system using a passive bass radiator. Here I am faced with the dilemma, perhaps a trilemma, of whether to use Tang Band or Mark Audio radiators, or even some more expensive Supravox or Lowther. The size of the full range driver I intend to use is up to a maximum of 6.5 inches, while the passive radiator should be at least the same size as the main speaker. Do you have experience with such solutions, full range with passive radiator?
@rodolfonetto118
@rodolfonetto118 2 жыл бұрын
Dude, your videos are great. I would just recommend you to check a bit more about AC circuits - if you haven't done so already since this is from 2018.
@chkao59
@chkao59 3 жыл бұрын
Wow,so glad to find this video, I like the sound of full range speakers,but always a little something wrong. This video solve the question that bother me for a long time.
@naibafabdulkobor4301
@naibafabdulkobor4301 2 жыл бұрын
You've come to the right place to learn something good ... but ... actually baffle step is an acoustical phenomenon that (in general) applies to multi-way speakers just the same. You might just have a little more flexibility dealing with it in 3-(or-more-)way designs. OTOH there are successful full-range designs relying on flat wide cabinets to overcome the problem. Many ways to skin the cat.
@ryanmiskin8925
@ryanmiskin8925 Жыл бұрын
A basic 31 band EQ is much easier to just cut the peaks to smooth out the curve. I did this all the time with a Focal demo disk (I believe it was #2?) that had the test tones on it. I'd simply go from one frequency up to the next, making sure it sounded smooth. If something seemed too loud, I'd just cut it and keep moving to the next. Worked amazingly well to give a smooth response.
@chuckmaddison2924
@chuckmaddison2924 11 ай бұрын
I used my old Yamaha equaliser to try some open baffle speakers. Ultimately, I prefer a parametric equaliser.
@dilbyjones
@dilbyjones 4 жыл бұрын
Yes!
@endall39
@endall39 5 жыл бұрын
If you have a dsp with a good range of eq options, is it better to solve some of the problems in the signal rather than adding a lot of chokes and caps? This would make for an interesting video. The availability of DSP with items like the miniDSP 2x4 is a game changer. It's not as cheap as passive components, but it's not that expensive and it gives you a lot of tuning options to deal with both intrinsic and environmental challenges you don't get with a passive fixed network, plus the power losses associated with caps and coils. Thoughts?
@westelaudio943
@westelaudio943 4 жыл бұрын
No, because it sounds dead, the speaker isn't meant to sound flat in a room.
@mjodr
@mjodr 4 жыл бұрын
@@westelaudio943 You could do a simple digital EQ and not completely flatten the response curve. Then it wouldn't sound "dead". Keep the quirks of the driver, do a simple low pass, high pass, or variable Q band pass to fix the large range of a problem, keep the other quirks. That's how I see it. I agree, having 15+ bands of EQ and getting a speaker to measure flat on a microphone makes it sound dead, but it's not the only digital solution. I think I would rather do digital filtering than have a choke and resistor in the signal chain.
@paulsochinfan
@paulsochinfan 8 ай бұрын
Sounds right, I'll think about it
@jcb8779
@jcb8779 8 ай бұрын
I filtered a pair of fidelio with a minidsp shd and Dirac with a great result
@MAXkruglov
@MAXkruglov 5 жыл бұрын
Great video. Linearisation - just an important part, and what you think about phase distortions? Correction circuits (crossovers) have the "phase shift" , so the "localisation" could be an issue....
@westelaudio943
@westelaudio943 4 жыл бұрын
No. Phase shift is not a issue if both drivers are shifted the same.
@mariomedina821
@mariomedina821 6 жыл бұрын
I worked my ass off to make a bluetooth speaker and turned out super nice looking but lackin some bass. I tried a 1 mH inductor and a 4.7 5watt resistor and what a diference!! Anyway to show you some pics?? Thanks
@OscarHernandez-ym4hx
@OscarHernandez-ym4hx 4 ай бұрын
If I am using a 3 way crossover.. Do I need this ? Thanks.
@ianhornsey6021
@ianhornsey6021 3 жыл бұрын
Hi I'm thinking of building a pair of full range speaker's using Tang band W8-1772 8inch would I need a crossover and any help what I would need would be very helpful cheers
@hamzatatta952
@hamzatatta952 Жыл бұрын
Hi I have markaudio full range 10 p. Can I add a Baffle step xover circuit to get get the best from the full range But doesn’t that defeat the hole point of a full range or do you get the best of both worlds?
@porkchopspapi5757
@porkchopspapi5757 4 жыл бұрын
Oh noice. You guys got me saying go ahead and.
@daviddideriksen5055
@daviddideriksen5055 Жыл бұрын
What application are you using for this demonstration?
@bentnissen
@bentnissen Жыл бұрын
Can I get a better sound ( lower frequenses) from my Audio Nirvana 12" cast frame ?
@gunlover1992
@gunlover1992 5 жыл бұрын
Really interested video! Thank you. But I have one general question. Do you need a special design for a full range speaker enclosure? Or can you just start designing without any special needs?
@attainableaudio7130
@attainableaudio7130 5 жыл бұрын
You would just design for the bass response. Though you have to keep in mind the power handling as must full range have limited xmax.
@russellborrego1689
@russellborrego1689 6 жыл бұрын
Great video. Full range drivers are a great option for a lot of applications. Hopefully this opens some eyes that it's not always a matter of trying to boost the lows through processing, and that stomping on the highs a bit to bring them down TO the lows is a perfect solution. I gather you'll be building this? Would love to see it measured up when you're done! Seriously, great video!
@Toid
@Toid 6 жыл бұрын
I will be building a version of this. Although, I will probably use the 8 ohm version.
@westelaudio943
@westelaudio943 4 жыл бұрын
Using FR drivers for lows is not optimal anyways, when you turn it up you get a lot of Doppler... Better to use them as midtweeters.
@MrZona93
@MrZona93 2 жыл бұрын
@@westelaudio943 maybe the lows of a FR are sufficient for a small room without boost but always with a baffle step correction.
@damienwright2483
@damienwright2483 4 жыл бұрын
Do you happen to know why this software will only let me upload one frd file and not all four at once?
@martinolesen9930
@martinolesen9930 5 жыл бұрын
Hi, maybe a stupid question, but the the frequency response you calculate with Xsim, is that with the driver in open air, no speaker cabinet at all, what? What i mean is that the frequency responds, specially, in the low end, must very depend on cabinet size, ported or sealed, transmission line ect? So the example you show, under what driver cabinet (or none) conditions is that, and can similar excersise be done where a certain cabinet design are incoorperated in the calculation when searching for optimal linarity? By the way, super nice videos :-)
@Toid
@Toid 5 жыл бұрын
Martin, good question. We are mainly just taking care of the high end in this video. In order to take care of the low end you would want to use a program like WinISD to help you get the response you want. I did a series on that program here: kzfaq.info/sun/PL6hjpiCHZmIOAv44PCreW5KlI35h1mTZK
@TexasCorgiGun
@TexasCorgiGun 2 жыл бұрын
Can you build a 3way open baffle design ?
@SDMacMan
@SDMacMan 4 жыл бұрын
Your calculations are assuming your box is floating in mid air with nothing around it. If your boxes are say sitting of your large desk or mounted on a wall, you would need much less attenuation of your highs. Am I correct?
@kfl611
@kfl611 2 жыл бұрын
Do you loose bass if it is ported?
@georgeg4136
@georgeg4136 4 жыл бұрын
Νice video ! Please, if you can, suggest me a Dayton full range 3.5" or 4" or another of the same category to match it with a Peerless 6.5" woofer, no tweeter, I want to make experimental studio monitors, just for fun ! Thank you very much !
@chuckmaddison2924
@chuckmaddison2924 11 ай бұрын
I've seen this over 30 years ago but with slight difference . A capacitor in parallel with inductor was also fitted and a variable resistance.. This allowed the middle to be adjusted . I believe the title of article was " How to make a bad speaker sound better ".
@fullsendmarinedarwin7244
@fullsendmarinedarwin7244 2 ай бұрын
I recon I’ve seen that before too … gives it more like a traditional smile FR response that a lot of people enjoy for every day listening
@chuckmaddison2924
@chuckmaddison2924 2 ай бұрын
@fullsendmarinedarwin7244 The article most likely was in " Silicon Chip "
@fullsendmarinedarwin7244
@fullsendmarinedarwin7244 2 ай бұрын
@@chuckmaddison2924 Rings a bell!
@dijpdepijp2154
@dijpdepijp2154 3 жыл бұрын
How to choose your frequencies and amount of attenuation?
@AutoBodyEverything
@AutoBodyEverything 4 жыл бұрын
I want to put together a stereo system on a 1995 Del Sol with the most perfect frequency range I can conjure up. Something like a 6 1/2 woofer and a 6 1/2 sub on each door and a 4 inch mid range and a combination of tweeters. It’s gonna take a lot of time with research but I just wanted to ask you to see what you thought about it.
@hifiman4562
@hifiman4562 4 жыл бұрын
Since you don't have much interior space I would do it this way: 1) wide band driver on the a-pillar, playing from 200hz and up, Audible Physics makes a great wide band, you can put them in pods, look on ebay for pods 2) Audio Development sw600 in the doors, from 40-200hz, serious bass kick 3) Dayton Audio dsp, or something better, but get a dsp
@hamzatatta952
@hamzatatta952 Жыл бұрын
what is h bst amp for a full range driver
@piyushkadukar7337
@piyushkadukar7337 5 жыл бұрын
Great work man. Thanks a lot. I'm a beginner kindly do a video of some basics of speaker design like what is impedance, what is crossover, what is frequency responce and what is tuning of subwoofer; though internet has lot of information on it but you seems to be quite excellent in explaining these things . Do listen to my comment Thank You.
@Toid
@Toid 5 жыл бұрын
I've done quite a few of those videos already. If you look through my videos on my channel come when you'll see I have done an entire series on how to design a crossover and how To create a properly size Box using the program winisd. There's also videos on what do you use of 4 ohm driver with an 8 Ω driver among other things. Check out the other videos by clicking on my name.
@piyushkadukar7337
@piyushkadukar7337 5 жыл бұрын
@@Toid Apparently I have been through your videos and been exploring them for deep understanding thank you. will let you ask if needed man . Thanks a lot for your quick responce.
@jedunboxing4127
@jedunboxing4127 3 жыл бұрын
the speakers that im going to use dont have that files
@RennieAsh
@RennieAsh 5 жыл бұрын
Does xsim not have a simulation for baffles?
@Toid
@Toid 5 жыл бұрын
It does not. It just offers crossover simulation
@GeorgeTsiros
@GeorgeTsiros 5 ай бұрын
The _assumption_ is that the spec sheet, the datafiles, are... for infinite baffle?
@kennethlegendre
@kennethlegendre 5 жыл бұрын
I have a question... If I'm making a bluetooth speaker that is going to sit horizontal, what dimension do I use for the width? Is it the shortest dimension, or the actual width? Watched the old video and looked around a bit, but couldn't find the answer. Thanks for your help.
@Toid
@Toid 5 жыл бұрын
It doesn't matter. Any if the sides can be interchanged
@kennethlegendre
@kennethlegendre 5 жыл бұрын
123Toid With the calculations though, there is a pretty big difference. My box is going to be about 5H x 14w x 10D. Using the 5" gives about 900hz where the 14" gives around 300hz. Pretty big difference there, I think. I'm new to this and I'm not looking at X-sim so I'm not sure. Thanks again for your help.
@Toid
@Toid 5 жыл бұрын
@@kennethlegendre ah, you're talking about the baffle step. I didn't understand what you were asking. You will use the shorter of the two measurements. In this case 5".
@kennethlegendre
@kennethlegendre 5 жыл бұрын
@@Toid Thanks. Sorry I wasn't clear enough on my question. Keep up the great work. I'm going to play around with this tonight.
@Toid
@Toid 5 жыл бұрын
@@kennethlegendre you're welcome. I hope everything goes well
@Danthehorse
@Danthehorse 10 ай бұрын
Ive bern been looking into full range and its the first time I've seen this Db bass drop mentiomed and using ctossovers its kind of disappointing, as i I thought the main point of them as a diy project was that crossoovers are not needed...
@justingardner4555
@justingardner4555 5 жыл бұрын
Can you get the same effect my tuning a port to get a little boost on the low end?
@tomkocur
@tomkocur 5 жыл бұрын
No. BSC boosts everything below bafflestep frequency, which can be 400Hz or higher. You can't tune a port to boost such a wide frequency range.
@Justwantahover
@Justwantahover 4 жыл бұрын
I can understand what you are on about but I can't understand how you are implying that the results of just putting it in a box would be different (and less bass) than what the graph says. After all isn't it a frequency curve for a driver just put in a box, so how could it be any different? Is the graph for a bass horn or something and not just a small bass reflex box? Can you please explain.
@Toid
@Toid 4 жыл бұрын
The frequency response you see me working with was from a manufacturers graph that they run in free air on an infinite baffle. Once you put it in the box, the low frequency (which have longer wavelengths) will start to go around the back side of the box. While the higher frequencies stay projecting toward the listener. Where this happens depends on the size of the box. This is called baffle step loss. If you took this measurement in a box then you would see this loss and create the filter like shown.
@Justwantahover
@Justwantahover 4 жыл бұрын
@@Toid Thanks (the penny drops) mystery solved!
@subramanyamysore
@subramanyamysore 3 жыл бұрын
How do I contact you?...I have a project to discuss
@cvee2614
@cvee2614 4 ай бұрын
...with that initial response for that FR driver used, I wouldn't have added any crossover. Leave it alone.
@Toid
@Toid 4 ай бұрын
This is a manufacturers graph, so it’s not taking into account baffle step. No matter what you would add a baffle step compensation circuit. Otherwise, this would play entirely too bright.
@arthurwatts1680
@arthurwatts1680 5 жыл бұрын
Aren't most car speakers fullrange ? I know you can get separate tweeters to mount higher up etc, but for the cheap and cheerful brigade, it was usually just two 6" drivers in the parcel shelf and another pair in the front doors.
@Toid
@Toid 5 жыл бұрын
Yes they are typically considered full-range
@theejoeylee
@theejoeylee 4 жыл бұрын
....and why most base models have no response above 8k. Even if it has a wizzer cone...its not doing alot
@charleslake1234
@charleslake1234 4 жыл бұрын
I downloaded Xsim and input my FRD and ZMA but it seems to not work and give me an accurate reading for my Full range drivers. The Dayton Audio PA130-8 5" Full Range PA Driver
@nikleiser5888
@nikleiser5888 6 жыл бұрын
Fullrange are great BUT only up to a certain size; 13cm are the sweetspot, 17cm are still kinda OK but the directivity is pretty bad, the sweetspot very small, atleast as expensive as 2Ways, the enclosure has to be big and Bass is very limited. A 20cm Woofer plus a Tweeter in Waveguide is the better choice if you compare it to 20cm Fullrange.
@mm6705
@mm6705 5 жыл бұрын
What do you have to say about the Dayton reference series 4" full range?
@juststuff5216
@juststuff5216 5 жыл бұрын
Personally I've not tried it, but it is on my 'buy and try' list, but for the price, they've gotta be worth a shot! Part of my story: I went from Dynaudio speakers, and Dynaudio are not shabby by any stretch, (back) to diy and I've not looked back since. I would only endorse to commercial loudspeaker brands and Dynaudio is one of them. I have bought commercial speaker to compare and IMO the don't compare! So far my Mark Audio's has been a good investment. The closest commercial speaker i have to compare my sub £69 CHN-70 drivers with is my £250 Monitor Audio BX2, and I don't miss my Monitor Audio BX2 speakers at all. Not saying my 4" are bass monsters, but the clarity of sound that comes from the Mark's are far and away better than the Monitors. You can do a lot with a 4" driver kzfaq.info/get/bejne/nq-njc17xtS8kZs.html but for the most part people fall for the; more $ = better ... which is far from the truth. Acoustics don't care about money! Money is an emotional/business parameter placed by (mostly) unscrupulous people in my experience, but money has little to do with acoustics.
@danielesbordone1871
@danielesbordone1871 5 жыл бұрын
Kenrick sound in Japan builds high-end speakers and he uses 15 inch JBL full.range drivers.
@1moderntalking1
@1moderntalking1 Жыл бұрын
Buy a Mark Audio one 😅
@TheMessenger212
@TheMessenger212 3 жыл бұрын
BUILD STUDIO MONITORS FARFIELD
@riveralley
@riveralley 6 жыл бұрын
What do you mean by the question that you asked?
@Luke-qs2cg
@Luke-qs2cg 2 жыл бұрын
The rs100 is DEFINATELY the smallest 4" driver ever. Closer to 3. I've got a pair of 4" tang bands and they are probably 25% bigger if not more
@integra8502
@integra8502 5 жыл бұрын
how does this compare to the Dayton Audio PS95
@Toid
@Toid 5 жыл бұрын
I'm actually using this right now in a build for Joe N Tell. I personally really like this. It has a really nice linear response.
@rolf_reichts
@rolf_reichts 5 жыл бұрын
Nice introductory video to show a few components of a passive filter, ...but...your actual adjustment (i.e. the selected coil and resistor values) will certainly need verification! Unless you have the cabinet built and the driver measured in there, this exercise here is merely of intellectual value. You may also use a software that _can_ simulate the influence of a baffle step. Check out for instances Boxsim.
@netx421
@netx421 2 жыл бұрын
Especially finding the required values could prove difficult but I think he did a great job explaining what is going on here.
@Justwantahover
@Justwantahover 4 жыл бұрын
That is a good quality FR driver. But with cheapies you usually get a rolling off after 10 khz, especially the larger cheap FR drivers. They are a bit "muffly". To fix that I do exactly what you said in this video (an inductor in parl with a resistor) but I also add a 1.5 mf cap in parl with the other two components. It makes cheap FR drivers sound like way more expensive ones. I came to the 1.5 mf through experimenting and listening. I tried 2 mf and 1 mf and found that 1.5 is best. It "boosts" treble without making them sound "chiffy" (an inherent problem with FR drivers). The trick is to go higher than the "chiff" so the "chiff" won't be let in but the upper "tizz" is let in..
@serasane
@serasane 5 жыл бұрын
Boundary gain will be 12 Db...
@OscarHernandez-ym4hx
@OscarHernandez-ym4hx 3 ай бұрын
No sound test. For all we know the speaker might burn out in less than 3 min ..Sorry
@tomkocur
@tomkocur 5 жыл бұрын
No compensation circuit will ever fix the pretty bad directivity of the full-range drivers.
@dreamdiction
@dreamdiction 4 жыл бұрын
So sit in front of the speakers.
@joeygonzo
@joeygonzo 3 жыл бұрын
Where's the $300 build ?
@Toid
@Toid 3 жыл бұрын
kzfaq.info/get/bejne/gpxdn8ZltNvTk2g.html
@sc0or
@sc0or 3 ай бұрын
80dB sensitivity is not "really good" This is a tr... The world is divided into two parts: those who believe they can push x100 watts into a driver and everything will be all right, and those who listen to the first watt with high sensitivity drivers. Cheers.
@thomasschafer7268
@thomasschafer7268 3 жыл бұрын
Better buy a fostex driver. No correction Parts necessary.
@naibafabdulkobor4301
@naibafabdulkobor4301 2 жыл бұрын
Ach was. Hier ging es nicht darum, ob der unglaublich gute Dayton Audio RS100-4 eine Entzerrung benötigt. Hier ging es darum, wie man bei irgendeinem Breitbandlautsprecher in einem relativ schmalen Gehäuse den Tieftonabfall im Vergleich zur unendlichen Schallwand kompensieren kann.
@thomaslechner1622
@thomaslechner1622 Жыл бұрын
That is not a "baffle step", but a shelving filter.
@Toid
@Toid Жыл бұрын
Feel free to research baffle step compensation circuit. You might be surprised at what you find.
@thomaslechner1622
@thomaslechner1622 Жыл бұрын
@@Toid It can be used to compensate baffle step and / or other things, right. But it is correctly called shelving filter!
@Tbonyandsteak
@Tbonyandsteak 5 жыл бұрын
How to get the Best Sound from a Full-Range Driver= Give it a crossover filter. Papers are the best.
@attainableaudio7130
@attainableaudio7130 5 жыл бұрын
Yeah add another full range and add a lowpass to one
@TOM_78
@TOM_78 5 жыл бұрын
Fullrange means no crossover. Because its used over the whole range. Where do you want to cross ? To what ?
@Tbonyandsteak
@Tbonyandsteak 5 жыл бұрын
@@TOM_78 You also see bass speakers which can handle the Middletone, being filter that area away. Fulltone does Sound Better if bass and highnotes are filtered away. Does not mean it can be used as fulltone. In general i think fulltones are Better speakers than middletones. You also have the advantage that You can use first order filters, which is more transparent. Btw the best sounding speakers i ever had. Had 6 4inch fulltones. Pointing in different direction.
@attainableaudio7130
@attainableaudio7130 5 жыл бұрын
Yes just because it says full range driver doesn't mean you have to only use it that way. Oh and the circuit he installed is not a crossover
@dreamdiction
@dreamdiction 4 жыл бұрын
You could more easily just have turned up the bass on the amplifier.
@Toid
@Toid 4 жыл бұрын
That's not how baffle step compensation works or a bass knob
@dreamdiction
@dreamdiction 4 жыл бұрын
@@Toid Baffle step only affects tweeters on a baffle which is more than 10 inches wide. Baffle step does not affect bass. 2:02 Putting a speaker in a box does not decrease the bass, putting a speaker in a box increases the bass. You are playing with computer programs but it is obvious you have not actually built the speakers and tested/listened to them.
@Toid
@Toid 4 жыл бұрын
@@dreamdiction you really need to stop trolling and start learning. You have no idea what you're talking about. Instead of explaining it to you, just go to impulse audio's page and listen to his explanation of baffle step. Then feel free to erase any messages that make you look ignorant.
@dreamdiction
@dreamdiction 4 жыл бұрын
@@Toid Everything I said is factual so I'm not trolling. Baffle Step only applies to tweeter frequencies where half the wave length is shorter than half the width of the baffle front of cabinet. Putting a speaker in a box increases the bass below 300hz because frequencies below 300hz are omni-directional so they wrap around the speaker and self-cancel because the front and rear speaker radiations are 180 degrees out of phase. Putting a speaker in a box absorbs the rear sound wave radiations so they can't cancel the front radiations, therefore increasing the bass. All the frequency response graphs published by manufacturers test the speaker using the standard method of mounting the speaker in a one cubic meter sealed box to adsorb the rear radiations, so the graphs you look at are for a speaker in a box. You will not find any impulse audio video which agrees with what you are saying.
@Toid
@Toid 4 жыл бұрын
@@dreamdiction almost everything you said was incorrect. You obviously have your mind made up that you are correct, so I'll leave you alone. Feel free to read up on these things that you are very much ignorant of. Just in case I'm wrong, here's a good video for you. kzfaq.info/get/bejne/qdqklbditLS0aGQ.html
@solomonstewart1025
@solomonstewart1025 3 жыл бұрын
Too much echo.
How to get the Best Sound from a Full-Range Driver - Part 2
5:32
Toids DIY Audio
Рет қаралды 62 М.
KINDNESS ALWAYS COME BACK
00:59
dednahype
Рет қаралды 171 МЛН
Iron Chin ✅ Isaih made this look too easy
00:13
Power Slap
Рет қаралды 35 МЛН
Пранк пошел не по плану…🥲
00:59
Саша Квашеная
Рет қаралды 5 МЛН
KABD Amplifier Boards with DSP and Bluetooth 5.0
3:57
Dayton Audio
Рет қаралды 15 М.
6 Reasons to get a DSP, and 3 Deal Breakers!
9:49
CarAudioFabrication
Рет қаралды 55 М.
Car Audio Speaker Types EXPLAINED! Tweeters, Mids, Midbass etc!
7:13
CarAudioFabrication
Рет қаралды 122 М.
The New Lowther Premium Range
1:26
Lowther Loudspeakers
Рет қаралды 6 М.
How Sound Works (In Rooms)
3:34
Acoustic Geometry
Рет қаралды 2,8 МЛН
Fullrange 4” speaker diy - 6V6 SE amplifier
3:07
HUNGLAM LAM
Рет қаралды 9 М.
How Speakers Make Sound
7:06
Animagraffs
Рет қаралды 1,6 МЛН
Single vs Dual Voice Coil Subwoofer - Which is BEST? Wiring Explained!
9:51
CarAudioFabrication
Рет қаралды 77 М.
Want Subwoofer Performance? You MUST understand Hoffman's Iron Law
8:44
CarAudioFabrication
Рет қаралды 424 М.
Tang Band (TB Speaker)  W4-2315  4” Coaxial full range
2:36
Speaker TB
Рет қаралды 1,1 М.
Это - iPhone 16 и вот что надо знать...
17:20
Overtake lab
Рет қаралды 128 М.