How to Grind Inside Corners - Welding & Furniture Making

Рет қаралды 278,897

Күн бұрын

In this video I go over a few simple ways to deal with the dreaded inside corner weld. This weld is often the hardest to get finished to a consistent look and can really make or break your projects. I use a couple of my favorite methods, file, die grinder, and curved flap disc, to show you how to properly deal with that section of your work. There are obviously other ways to handle the inside corner weld, so shared your ideas in the comments!
Thank you to Pferd abrasives for sponsoring this video, I've been using their products for a few years and they really are the top abrasive company in the game. Check out some of the stuff I used in this video below:
As an amazon affiliate I earn from qualifying purchases:
Pferd Polifan Curve Disc
amzn.to/3a6w0MU
10 pack ( $12/ea)
amzn.to/2Y9S6Zw
Pferd File Set:
amzn.to/3sTz1cb
Pferd Teardrop Burr:
amzn.to/3chZ4Ui
Burr Set:
amzn.to/39VjfVi
Milwaukee Variable Speed Angle Grinder ( I got it on sale for $120)
amzn.to/2KKjjPc
Bosch Variable Speed Angle Grinder:
amzn.to/2YaLlq7
Pferd Victograin Grinding discs ( AMAZING)
amzn.to/3phjAIH
Strong Hand Buildpro Welding Table
bit.ly/3iJH1Yv
Check out the Lincoln Electric Power Mig 140MP, great for the home shop, Mig, TIG, and Stick in 1 machine!
→ bit.ly/MakeEverything140
Thank you to Pferd abrasives for supporting my shop and my channel. For links to some of the grinding discs I use most see below:
As an Amazon Associate I earn from qualifying purchases.
→ Flap disc:
amzn.to/2Myxozi
→ Inside corner disc (AMAZING):
amzn.to/2WoYM2q
→ Wire Wheel:
amzn.to/31k15rx
Thanks for watching! Be careful, know the limits of your skills and your tools! Don't try this stuff at home!
Like and Subscribe for more videos and check out our Instagram
/ makeeverythingshop
To help support Make Everything and this channel become a Patron:
/ makeeverything
For Make Everything T-shirts, hats and other products check out our website:
makeeverythingshop.com/store/
We teach classes in woodworking and welding here at the shop, if your interested see the current schedule here.
makeeverythingshop.com/events/
For PDFs of some of our project check out our profile on Instructables:
www.instructables.com/member/...
Below are some links to tools I use in the shop on a daily basis.
As an Amazon Associate I earn from qualifying purchases.
→ Bosch Miter Saw ( My Favorite miter saw)
amzn.to/2BeBulk
→ Sawstop Table Saw:
amzn.to/2DuAYVy
→ Wen Tabletop Metalcutting Bandsaw
amzn.to/2DrS7zf
→ Articulated Vise:
amzn.to/2FXKw9V
→ Bosch Portable Bandsaw ( 18V)
amzn.to/2mQdUq4
→ Porter Cable Restorer:
amzn.to/2BeWrfU
→ Lincoln 120V Welder ( good for a home shop)
amzn.to/2Dly6qV
→ The Camera I use:
amzn.to/2DqG325
→ The Tripod I use:
amzn.to/2rnEqfO

Пікірлер: 251

@djtheg6819 3 жыл бұрын

Here's a better tip. Obviously the sides and outside corner are easy to shape and blend to be seamless. The inside corner is the hard part. When you use the flab disc, it doesn't give you a nice tight corner. When you are making stuff that is essentially decorative or non load bearing you don't NEED to weld the inside corner. If you solder that joint to just fill in where the seam meets then you can easily blend that seam with a file and get a nice super crisp 90 joint.

@jeremyspecce 3 жыл бұрын

Good tip, I’d like to learn to solder so I could do that. (I know how to sweat pipes and do electronic solder but not that type- I guess it would be silver solder?

@olsonspeed 3 жыл бұрын

Where were these twenty years ago, when I really needed them? Definitely an improvement over the file and sandpaper method. Thanks for the tip, I will definitely be buying a few of these.

@leewelbanks6366 3 жыл бұрын

I got so tired of changing cut off wheels, flap disc's , grinding disc's so now I have six angle grinders all with a different item in it, no more changing anything until I wear it out. Haven't tried one of those disc with the abrasive around the edges, will have to look into that. Anything I weld that's supposed to look really good I always Tig weld.

@carbonunit6573 3 жыл бұрын

Yes yes yes. I have at least 10 angle grinders with different options because it is easily the greatest waste of time changing out the disks. Also have about 50 air die grinders with different attachments because they are even worse trying to change out. The Walter 2 in 1 disks are brilliant

@griptopia 2 жыл бұрын

This right here is one of the most requested things i get asked and filing in with practice is by far the best method. Specially when working with brass , stainless etc etc.. hiding the crimes.. lost count of how many times i see guys fabricating something that's going off to a polisher or secondary finishing and they are dressing welds with a massive disc.. die grinder , small sanding discs.. there should be no marks outside of 5 mm each side of that weld.. Filing in.. is the number one skill all fabricators should be taught. It's the thing i was shown before i was even allowed to pick up a welder. Great subject choice on this video.. not covered enough and i know you can file better than that :)

@onemanswork9248 3 жыл бұрын

you have just saved me hundreds of hours of work!!!! Thank you, I did not even know the curve flap disc existed.

@impactodelsurenterprise2440 2 жыл бұрын

So did u end up using it?

@onemanswork9248 2 жыл бұрын

@@impactodelsurenterprise2440 Yes I did.

@impactodelsurenterprise2440 2 жыл бұрын

How good is it?

@geoffhalstead1811 3 жыл бұрын

Just ordered some curved flap discs, something I didn’t know existed, and perfect for cleaning up the welds on the inside of my 1935 Austin Seven’s A-post👍👏 Cone shaped carbide tool🤗

@totalcardetailing2022 3 жыл бұрын

I got tired of the sharpe steel piece from a die grinder, so I found a good size magnet. I either put it on the piece or real close to the spot I was using the die grinder on. It really help out a lot.

@klue507 3 жыл бұрын

Never thought or heard of that idea. I’m going to give that a shot, I too hate sharp hot Steel flying at me.👌👍✌️

@Kineth1 3 жыл бұрын

I chuckled when you mentioned the extra cost of entry for the rounded flap disc. I just recently bought a second cordless drill so that i could save time switching between drilling pilot holes and driving screws. When you were setting up your grinder and talking about speeds i thought to myself "it's going to be quite a while before i decide to buy a second grinder, i haven't spent enough time switching discs for it to be worthwhile." Tool selection, and secondary tool selection really are a function of your time & effort vs tool cost. Even for home & amateur work; if you value your project time at $20/hour, after a total of 5 hours of tool changes (1hr/day over 5 days, 1/2hr/day over 10 days) it has cost you $100 to NOT spend the money on a second/specialty tool. I bought a cordless grinder to strip and repaint an old trailer, a rounded flap disc was probably the 3rd disc I bought. I could have gotten a wire wheel for my drill, but the time and frustration I saved by going directly to the right tools definitely compensated for the $$ I sunk into the tools.

@CyrusAhmadiMoghadam 3 жыл бұрын

Good tips. You referred to die grinder bits several times as dies, but they are actually called burrs. Hope that helps anyone who might be searching for them.

@MakeEverything 3 жыл бұрын

Yeah that was a brain fart!

@garagemonkeysan 3 жыл бұрын

Awesome video. I usually skip inside welds because it's just so time consuming. Welds are hard to hand file, literally hard. : ) Great options. Mahalo for sharing! : )

@motor2of7 3 жыл бұрын

Great tips. I have that Milwaukee grinder but usually use an air die grinder, never thought to use the Milwaukee. Didn’t know they made grinding discs with a rounded edge.

@raindropsrising7662 3 жыл бұрын

Incredibly helpful! Appreciate your time putting it together.

@michaelcoccojr2513 3 жыл бұрын

Nice job! I'm quite envious of your welding table!!

@santina4839 14 күн бұрын

Once again, great information, thank you so much. I think you just gave me back hours of my life! I have been struggling to get my corners clean. I look forward to getting that curved disc.

@georgesanchez9971 3 жыл бұрын

Love your welding table.

@passiton3801 11 ай бұрын

I used to work for a firm in the 70's that produced hospital trolleys from tubes. Our job was grind the welds down on the tubes (by hand) to look smooth, so they could be painted or chromed. Hard work, but we did it. Now the techniques would be very different.

@Jworonow 2 жыл бұрын

Really like your demo and particularly the list of the tools and accessories you use.

@clinte9897 3 жыл бұрын

Thank you for taking time to make video. A lot of good info

@christianmusso629 Жыл бұрын

This was a very much needed video as filing is very time consuming and tiring. Thanks for also giving the links to those tools used!

@shuckarelli 3 жыл бұрын

That table is sick!!

@liamellerby849 2 ай бұрын

Big fan and I have learned some great tips and tricks. I have always welded the weakest pulling joint first. Outside corner, sides in the direction of inside corner to outside, then Inside corner.

@adamos9296 3 жыл бұрын

You have a great tool my friend. Great table desk

@adeh503 2 жыл бұрын

That's an awesome welding table you have there my friend

@alanblyde8502 2 жыл бұрын

I’d happy enough with that bench, that’s a pearler🇦🇺👌

@Mitalayeka Жыл бұрын

Thanks Chris, this has been helpful.

@KUGW 3 жыл бұрын

I like your channel its always informative, that's why I started making videos. Its channels like this that make stuff interesting..

@MakeEverything 3 жыл бұрын

Thank you!! I appreciate that very much!

@jimmywilson1388 Жыл бұрын

That’s awesome man, I’ve never seen a flap disc like that. I’m definitely gonna get one.

@thedoingnotthedone.6292 11 ай бұрын

Thankyou!!! The round nose disks and variable speed grinder both new to me. I've that die grinder, a brilliant little tool.

@nathanmciver6496 2 жыл бұрын

Lol, you pulled out the file! I'm thinking "hell no! Thats not fun!!!" I have to grind and sand some inside areas on some sheet metal! I will try a dremal dye grinder if I can find an affordable one! Neat! Less than one minute!

@michaellukaniuk5074 3 жыл бұрын

You are a natural educator......subscribed

@KevinKimmich44024 3 жыл бұрын

really useful info about the curved flap disks. I did not know that they existed.

@lebohangtsele2024 3 жыл бұрын

Really helpful. Thank you very much!!!

@Nomadboatbuilding 2 жыл бұрын

Great tips. Arsenal now fortified with new options.

@dan.w.hoover2556 Ай бұрын

Super helpful - thanks!

@peger 3 жыл бұрын

WOOW i never see this type of flap disc. And they even sell them in Poland . Nice .

@peterlafayette5595 Жыл бұрын

Excellent video

@Metalhead-4life 3 жыл бұрын

I can't help but wonder how much that work bench costs?

@simon9447 3 жыл бұрын

I discovered these discs only recently..... they are fantastic. Which I knew about them years ago.. I am from Australia and here they are about 3 aussie dollars more than a regular flap disc.... I wouldn't be without one now! By the way, I have nothing to do with the company that makes them, I just like'em.

@SWFabrication. 3 жыл бұрын

There are a couple of tools that you did not mention that are perfect for this application. Not sure if you knew about them but, a Dynafile electric belt sander and a Flat Head grinder. Both have been used for years and I have relied on both for this specifically. The belt sanders is quite handy as you can get the belts in 1/4" and 1/2" widths with a variety of grits as well as Scotch-Brite belts. Thought I'd throw them out there for yah to check out and anyone else interested. Great video, like watching your contents.

@Been.Here.Since.2007 9 ай бұрын

Came here to find the dynafile comment. Nothing better than an 1/8th" trizac belt on stainless rails.

@MrMopar413 3 жыл бұрын

Another thing I do is use All metal auto body bondo at the end. With the right amount of hardner agent it drys in about 20 minutes or less then you finish sand then paint. Yes it takes some time but the finished product looks great especially if the welds don’t look that great but strength wise they are OK.

@dukesdad1 3 жыл бұрын

Very good info!

@jamescalvin5222 2 жыл бұрын

I chamfer the box section for the inside weld and the weld just beds in nicely 👌

@tonymonastiere8510 3 жыл бұрын

Nice layout with the shop. What many items, i could turn out there...ENDLESS!!!

@MakeEverything 3 жыл бұрын

I love it! Ive been working for years to build up the shop and its near perfect, but itll never be 100%! always strive for more!

@horvath14041984 3 жыл бұрын

I use Mig to weld outside and TIG to weld inside. No need to grind if you weld on lean settings. After powder coat it looks great. This is a great video though!

@p.s8950 3 жыл бұрын

I'm going out today to grab some curved flap disc, I never heard of them before. Thanks for this vid. BTW I'd be pretty happy with your inside weld as is. LoL

@Surmoka 10 ай бұрын

I've seen a (primarily) woodworker glue sandpaper around the head of a router bit, then put it into the router table. He removed the fence to make some space, then carefully moved the steel workpiece around the sanding router bit to grind the inside corner. He had multiple sizes of bits with multiple grits of paper on them for all sizes of corners.

@erniehenshaw4161 3 жыл бұрын

That air bevel tool you showed in another video would make a nice bevel before you weld those.

@Eschelonistic 3 жыл бұрын

The only reply I've read that made sense if you were to MIG weld it, bevel the inside edges, a quick seam you would not need to do any work on the weld.

@stickypaddle6432 3 жыл бұрын

Makes me want to start my own youtube channel to show people how to "actually" weld and grind corners

@tristanpatterson3843 3 жыл бұрын

Yeah, fuck.

@MakeEverything 3 жыл бұрын

You should do that

@akbychoice 3 жыл бұрын

It’s been a week, how’s it coming along ?

@Charles-tj8ol 3 жыл бұрын

@Make Everything I appreciate you sharing your insights. I’m a welder and have been thinking about making some table bases to sell for live edge slab furniture. I know it varies but could you share what kind of price you typically might place on some semi elaborate designs? Thx in advance

@photopc 3 жыл бұрын

I Tig weld inside cornet joints.. much neater less finishing required and a softer filler...

@stansenter2660 2 жыл бұрын

That's nice, but are you good enough with the Mig or Stick? Now you'll need these tips he's giving us.

@davidevans1128 6 ай бұрын

Goid teaching and thank you. Many of us just tinker on things, lil pcs of yard art or car/ truck stuff. I made some A Pillar iff road light mounts, and had triangulated inside ..corner's 😢 Not being a welder and not gaving the proper tools, turned a 6 hr orihect into almost 30 hrs...lol. i need a Die Grinder w good attatchments! I'm still not happy with em..but they will do. I need to practice and get more instruction. Most of us aren't gonna live long enough for trial and error learning...lol😅😅😅

@nateand3 3 жыл бұрын

Thanx man I've never seen these

@anthonymarino4260 2 жыл бұрын

nice ideas thanks

@c10_steve61 3 жыл бұрын

3/8” air belt sander from HF. Use good 3m belts and you’ll bet done even faster than that 2 min. Sander was $30. 👍

@bobdelaplage690 4 ай бұрын

Great my friend!

@andrewoperacz7427 3 жыл бұрын

Such killer discs.

@mathewjacob8622 3 жыл бұрын

They are from pferd

@sween187 3 жыл бұрын

From the snap shot on the video, I first thought it was going to be about rocket stoves, but now I have to get some of them discs .

@josephka5149 3 жыл бұрын

When things were at their very worst: 2 Suns, Cross in the sky, 2 comets will collide = don`t be afraid - repent, accept Lord`s Hand of Mercy. The first sign - the Earth will spin faster. The second sign concerns the sun, which will loom larger, brighter and begin to spin. Scientists will say it was a global illusion. Beaware - Jesus will never walk in flesh again. After WW3 - rise of the “ man of peace“ from the East = Antichrist - the most powerful, popular, charismatic and influential leader of all time. Many miracles will be attributed to him. He will imitate Jesus in every conceivable way. Don`t trust „pope“ Francis = the False Prophet - will seem to rise from the dead - will unite all Christian Churches and all Religions as one. One World Religion = the seat of the Antichrist. Benedict XVI is the last true pope - will be accused of a crime of which he is totally innocent. - banking collapse was deliberately masterminded by the Antichrist - Antichrist will step in and create a false peace in the state of Israel by joining them with palestine in an unlikely alliance. - „He will recite extracts from My Teachings, which he will passionately proclaim from every secular stage in the world, until people sit up and take notice of him.“ The Book of Truth mdmlastprophet.com/the-schism-in-my-church-will-be-broken-into-different-stages/ mdmlastprophet.com/the-time-for-the-comet-to-appear-of-which-i-spoke-when-people-will-believe-that-there-are-two-suns-is-close/

@Raul28153 2 жыл бұрын

use a shop vac to control those nasty chips. If I am painting I use "Acme Weld Improver" It removes porosity flows into voids and makes the weld so much better. I think it's called Bondo.

@bradthayer6782 3 жыл бұрын

Good tip.

@Traderhood 4 ай бұрын

Helpful!

@stevehall8227 2 жыл бұрын

How about a video on a 3 corner joint, like where a table leg meets the lower frame.

@JohnCorry 2 жыл бұрын

That table tho!

@Isaacmantx 3 ай бұрын

Just get a Pferd Combiclick disc set... you can just use your angle grinder on the inside corners exactly like you use your flap-disk on the rest. It saves SO much time and the finish is immaculate.

@NikeaTiber 2 жыл бұрын

Thought it basically goes without saying to wear eye protection when using a powered grinder I also wear a face shield when using any carbide burrs (rotary files). As you mentioned the shavings that they create are really sharp, and in my case seem to have the ability to bypass my safety glasses with alarming frequency. Those will ruin your eyeballs really quick.

@protect.your.digits.creations 3 жыл бұрын

Holy Crap , I the the first responder .... Hey Chris EXCELLANT video for the first timer and the seasoned Pro. I learned a lot . Stay well your family and you my friend 🤜🤛🙏

@dwwoodbuilds 3 жыл бұрын

Thanks for the tips Chris! Definitely need to get some of the Pferd disks. If I can't be a great welder, I can at least be a great grinder! 😁

@carolinekable7095 2 жыл бұрын

THANK YOU

@firetom911 3 жыл бұрын

Thanks for the tips, try to find those curved flap disks here in Vienna /Austria 🇦🇹. Nice shop Btw.. 👌Stay safe 👍

@lust4 3 жыл бұрын

Thank you

@janeblogs324 3 жыл бұрын

You welded all those in a terrible weld sequence, you will get maximum pull/distortion that way. Go outside, flats, then inside

@noneck3099 3 жыл бұрын

I use a standard ( not ultra thin ) cutting disc...for fine grinding

@turdcurd6063 3 жыл бұрын

FYI files only cut in 1 direction, the push stroke. Filing on the back stroke just dulls and damages the file.

@carbonunit6573 3 жыл бұрын

Ha ha. Never knew that. And I use my files a lot. Makes sense. Thanks.

@souffianeyasser 3 жыл бұрын

Unless it is a bastard file.

@turdcurd6063 3 жыл бұрын

@@souffianeyasser Well they are bastards.

@carbonunit6573 3 жыл бұрын

Been practicing my pushing without the pulling and the wife doesn’t think it works

@Pushpin06 2 жыл бұрын

@@carbonunit6573 have you tried lifting it up on the back stroke? ( ͡° ͜ʖ ͡°)

@roytrudgian4786 3 жыл бұрын

As in most things, unless one has time. Time is money, made or lost. It's up to the individual. 👍🇦🇺

@menoname3594 2 жыл бұрын

I'd like to see a similar video for steel angle rather than SHS/RHS.

@frankthespank 3 жыл бұрын

“Grinder and paint makes me the welder I ain’t.” 😎

@frankthespank 2 жыл бұрын

@AJ XOXO To further cover up my bad/ugly welding, lol

@EcoMouseChannel 3 жыл бұрын

Speaking of knowing what tools are out there, most of us professionals would use a Dynafile/Dynabrade to get in tight corners, along with an orbital sander, working up through the grits and scotchbrite pads. But if the weld for sure isn't structural, but you only care about appearances... AND you know it will be painted or powder coated you can fill it with goo... If painting, use Bondo. If Powder Coating then use Lab Metal (metal powder filled so powder coating electrostaticly sticks to it)

@MakeEverything 3 жыл бұрын

I was going to show the dynafile actually, but most small shops and people starting out dont have the air compressor power to run one effectively. Ive got another project coming up that needs perfect painted corners so ill save it for then!

@EcoMouseChannel 3 жыл бұрын

@@MakeEverything These exist though... www.harborfreight.com/53-amp-12-in-bandfile-belt-sander-62863.html All the way up to the brand names you know and love. Including Dynafile II coming in at a hefty $320 Perhaps that would be a great tutorial... working with the HF version, compare that to a high end one and note the ease of use between the two.

@sailingyemaya9781 2 жыл бұрын

Bondo makes my welds real pretty

@timberwrightsvs480 2 жыл бұрын

We're not all master welders, so I want to thank you for producing a video that will greatly enhance a novice's ability to have something come out decent. Although quite a few of them lead to items that aren't available, I also want to thank you for the links. When it comes to the flap discs with the rounded edge, the Pferd 67192 discs, I noticed that they have a 7/8" arbor hole. I also noticed that the ones used in the video are red, not blue, so I'm wondering if the link is accurate? If it is accurate, would you please specify which grinder you used these discs with. I intend on using the carbide burr and the rounded abrasive disc methods to shape my novice flux-core MIG (inside corner) welds, so your words are very greatly appreciated.

@davidbrooks960 Жыл бұрын

Use a gas welding unit

@timberwrightsvs480 Жыл бұрын

@@davidbrooks960 Would you mind elaborating on what you mean by "...a gas welding unit"?

@Neptune730 3 жыл бұрын

I don't recommend using a file like a saw files used in a push motion only if you pull it back and forth like a saw you can wear it out a lot faster it's not good for it

@DieselRamcharger 3 жыл бұрын

nope. dragging a file backwards doesnt hurt it at all. go look at a filing machine.

@thegeneral7484 3 жыл бұрын

What about the inside corners on angle steel?

@dillanbates8646 Жыл бұрын

Hopefully I get a response, lol but okay so I’m making a aquarium stand and need like exact 90 degree angles so that the tank can sit in the 90 degree snug, if I skip this inner weld, and weld the other 3 sides, and add some braces underneath the length of the square tubing, would i be good to go? I’m using 1.5” square tubing 11guage

@justmakeit2616 3 жыл бұрын

Just tig weld the inside corner. And for the outside use 3m curbriton fiber discs k120 en then the 3m scotch disc. U get some smooth finisching. If u use it on a variabel rpm angle grinder u even get it way smoother. I dont go back to flap disc. The fiber disc works way better

@aigretbenoit 3 жыл бұрын

Yeah those curve discs are a gamechanger. Been using them for a year now and couldn't go without them now. You should try some 3M cubitron fiber discs for the flat parts. There is no comparison in grinding speed and finish. 2 swipes with a fresh disc leave perfect flat grind. I prefer 60+ grit as i always blend with 80 grit on a random orbital to smooth out all the corners.

@1992jamo 9 ай бұрын

1000% agree with statment about 3M cubitron fibre discs. They are awesome.

@alonsonavarro2126 10 ай бұрын

1/16" thick cutting disc works like a sharp grinding disc. Works if you have a steady hand and know how to handle a grinder.

@amanwithouthope9475 3 жыл бұрын

Wow great tip! Definitely gonna pick up a box of those faired flap discs, are they on amazon?

@dwwoodbuilds 3 жыл бұрын

Look at the video description. He provides links to the products.

@albertcianci2909 3 жыл бұрын

Wondering if you could give any tips on how to quote a customer on side work. Makes table bases and frames for mirrors

@msk3905 3 жыл бұрын

Add up all materials then figure out time required to make, these two give you direct cost now add what you feel is an appropriate overhead cost.

@frankschwartz7405 2 жыл бұрын

OR, you could use a "matured" hard grinding wheel with the circumference profile rounded from use. Should go right into those corners.

@firpofutbol 3 жыл бұрын

Is the weld stronger if you don't grind away the weld bead?

@PetesShopMakes 3 жыл бұрын

What about using one of those 1/2 inch wide pneumatic or electric belt sander/grinder? I would think that you'd be able to get right up next to the adjoining section and grind down the weld without cutting into it just as easily but I don't know if you've ever used one of those for something like this and if it works as well as I'm guessing or not. I haven't tried it myself but it seems like it should be another decent tool for quick material removal that can work in that 90-degree plane which is the main goal here.

@MakeEverything 3 жыл бұрын

I also use one of those little belt sanders, they work great, but I wanted to keep this super simple and lot of people dont have enough air compressor volume to run them for long periods of time. The electric ones are alright too, but they run so much slower they aren't as efficient. Maybe ill do a whole separate video showing them

@PetesShopMakes 3 жыл бұрын

@@MakeEverything Oh, ok. That makes sense then. It is kind of a specialty tool I suppose so I get why you wouldn't mention it here. Just was curious that's all. Thanks for the follow-up and for another solid video. Keep em' coming.

@jimpritz4169 3 жыл бұрын

Great tips especially the round nose disc. The carbide cutters are really fast but I hate all those little needles that usually end up everywhere. Are you a native NY'r? I grew up in a little town called Snitaria Springs near Binghamton, NY. Enjoy your channel. Thank you.

@MakeEverything 3 жыл бұрын

I hate those little carbide burr splinters!!! Yeah I’m in Nassau county, born and raised!

@rustydodge6167 3 жыл бұрын

Square and rectangle tubing not really a problem for inside corner welding. Demonstrate some angle iron inside corner grinding please. Personally I use a die grinder on the inside corners of angle iron. Would like to see your method. Thanks

@francisarledge9981 4 ай бұрын

Where did ya get that welding table?

@zachhoyt92 3 жыл бұрын

I use a dynafile or air file choose your grit and go!

@salvadorebertolone 3 жыл бұрын

what is that band saw in the background?

@Max-kw4px 2 жыл бұрын

I noticed in your videos you use both a cordless as well as corded milwaukee angle grinders. For cleaning metal, which variable speed angle grinder do you think is best - corded or cordless??

@MakeEverything 2 жыл бұрын

I recommend a slower speed angle grinder for cleaning metal. I like the Milwaukee corded variable speed grinder. It’s got great power even at low speed

@SAB445 3 жыл бұрын

What about grinding corners in tight spaces, let's say between profiles that are spaced 6cm appart for example? Tips and tricks for that please.

@gortsoppie 3 жыл бұрын

There are none. Best not to weld in there in the first place. Or hide it and carry on with your life.

@billoffutt1138 3 жыл бұрын

What the actual brand of the Curved Flap Disk and where can I buy it? Not listed in the video.

@MakeEverything 3 жыл бұрын

It’s the pferd abrasives , polifan curve disc it’s listed in the description

@simplyadvancedworkshop1982 3 жыл бұрын

I never knew curved flap discs existed. That'll definitely speed things up in my shop especially welding with a 240v harbor freight welder lol. Unfortunately I don't have a variable speed grinder but anything will beat a file and elbow grease!

@MakeEverything 3 жыл бұрын

Give them a try they are awesome!