How to Handle Stock Models and Operations in Mastercam Part Files

How to Handle Stock Models and Operations in Mastercam Part Files | Ask an AE

Рет қаралды 14,244

Күн бұрын

Watch Dylan explain how to handle stock models and stock model operations in Mastercam.
Looking for more online learning tools? Get started here: mastercam.com/support/trainin...
Join the #Mastercam community on social:
Instagram: / mastercamcadcam
Facebook: / mastercam
Education Facebook: / mastercameducation
Twitter: / mastercam
LinkedIn: / cnc-software
Get the latest Mastercam news delivered to your inbox. Sign up for our newsletters here: mastercam.com/news/digital-ne...

Пікірлер: 6

@mcwoj11 Жыл бұрын

It was very helpful, thanks !

@mastercam Жыл бұрын

Glad it helped!

@ipadize 2 жыл бұрын

i use the Stock setup for displaying the stock on my machine (Heidenhain controller). I only have one problem: when i have multiple toolpath groups with different coordinate systems in one machine group, then on the second toolpath group the stock setup box is wrong calculated.

@mastercam 2 жыл бұрын

Hi there! If you're referring to the stock setup that is output as part of the .H file by the post processor, we think this may be a limitation as the post processor is only looking at the initial stock setup in Mastercam and outputting that initially based off the initial work plane. The post likely lacks the logic to check and output a second stock configuration/plane setup and we're not sure that Heidenhain supports this or not. The potential work-around for this is to create separate machine groups like you mention in your question. We recommend reaching out to your Mastercam Reseller and/or post developer for confirmation.

@ipadize 2 жыл бұрын

i just received a notification that you have uploaded this video but then i see my comment from 4 months ago HOW 💀

@mastercam 2 жыл бұрын

We just made the video public! 😎