How to Hang IKEA Kitchen Cabinets on the Wall + 3 Tips and Tricks for Uneven Walls (METOD SEKTION)

Рет қаралды 233,836

Күн бұрын

If the wall is crooked and has a hump here and there, it's not so easy to fit kitchen cabinets or cupboards flush. I live in an old building with rustic clay plaster, so I have the best conditions for the worst conditions. However, since I'm not that into modern art, I use a "trick" or two to install the Ikea Suspension Rail and hang the cabinets flush on the wall.
Depending on the coutry you live in this product line of IKEA kitchen cabinets are called either Metod, Method or Sektion.
🛠️ Materials and tools used * 🛠️
Plastic Glazing Blocks - 600 pieces, 6 sizes.
Amazon: amzn.to/2TESjEV
Ebay: ebay.us/7AWbi9
Hex Head Lag Bolts / Wood Screws, 6x50, industrial quality from Dresselhaus.
ebay.us/wRkIkv
Fischer expansion dowel S8, size 8 mm x 40 mm
amzn.to/2T4JqV6
Makita DTD152Z Cordless Impact Driver, solo without battery and without charger
Amazon: amzn.to/3fT1gTZ
Ebay: ebay.us/uO3d5S
Makita Combo Kit: cordless screwdriver + impact wrench + 2x batteries + charger in Makpac
Amazon: amzn.to/34QSuzq
Ebay: ebay.us/4Ce27e
PROXXON Socket spanner set, 1/4"
amzn.to/3uUwYEy
Milwaukee Impact Socket Set for Impact Driver
(hexagon to 1/4" square)
amzn.to/34SVefw
Bosch Hammer Drill GBH 2-28
Amazon: amzn.to/3fXS5BQ
Ebay.de: ebay.us/wVek28
8 mm drill bit for stone / concrete
amzn.to/3vPtGUh
Stanley Self-Leveling Crossline Laser:
amzn.to/3uCOBca
Drilling Dust Nozzle:
amzn.to/3gbVZYf
Small Magnetic Spirit Level 20 cm:
amzn.to/3dO6k9W
* The product links to Amazon, Ebay, etc. are affiliate links. I get a commission if you buy something through them. The price does not increase for you.
0:00 What it's about
0:35 Marking and drilling
1:33 The right fixing with the strange washers
3:04 Trick 1: glazing blocks help if the wall is uneven
4:41 Trick 2: if the wall slopes downwards
4:54 Trick 3: If the wall protrudes a little at the bottom
Sun-sea animation at the end of the video by @visualdon, released under Creative Commons licence:
artwork by @visualdon - / visualdon or visualdon.uk/downloads/
/ visualdon

Пікірлер: 79

@Rico_Mcr 4 күн бұрын

Useful tips cheers. I'm glad to see you are using as many of the hundreds of glazing blocks as possibe. I hate waste. 😉👍

@hans.talhoffer 3 күн бұрын

Thanks! As it looks now my glazing block supply will still last for centuries to come and benefit lots of descendants. Never will they lack a glazing block come what may. At least I made sure of that!

@sunsande 6 ай бұрын

Your explanation, perfectly synchronized with the video, is excellent! Very helpful! Thank you very much!

@hans.talhoffer 6 ай бұрын

Thank you for the nice comment!

@user-ei8gq7cm2q Ай бұрын

Thank you. Omg this is exactly what I needed. I’ve been looking everywhere to try to figure this rail out.

@hans.talhoffer Ай бұрын

You're welcome!

@daven1719 2 жыл бұрын

Very clear video. Thanks for posting.

@hans.talhoffer 2 жыл бұрын

Thanks!

@mastershefu1221 2 жыл бұрын

This video is incredible. Thank you

@hans.talhoffer 2 жыл бұрын

Thank you!

@zenearthstudios Жыл бұрын

I love your accent and think your video was so helpful. It made your space amazing! Thank you and I wish I could hang out with you in person one day!

@hans.talhoffer Жыл бұрын

Thanks! This is the nicest comment I ever got. 🙂

@aethelwolfeful Жыл бұрын

Extremely helpful, thanks!

@hans.talhoffer Жыл бұрын

You're welcome!

@nw5835 4 ай бұрын

Wonderful video, very detailed and informative, I hope you are still getting pleasure from your work. Good luck.

@hans.talhoffer 4 ай бұрын

Thank you for the very nice comment!

@conny4973 2 жыл бұрын

Toll gemacht. Sieht Spitze aus.

@hans.talhoffer 2 жыл бұрын

Danke! Ich hab übrigens auch einen deutschsprachigen Kanal (mit den gleichen Videos): kzfaq.info/love/t9W7vnTbYDmpWtQpaIit6w

@Jean-bj5md Жыл бұрын

This video is all I needed I have searched for about 6 months and finally I found the right video thank u

@hans.talhoffer Жыл бұрын

You're welcome!

@hans.talhoffer Жыл бұрын

@bina nocht Like you, I also had to learn the hard way. Years ago, shortly after buying my house, I caught a guy literally sleeping while I was gone for a trip to fetch building materials. The good thing is, these kinds of people teach you two valuable life lessons: Don't trust anybody and learn to do as much as possible by yourself.

@hans.talhoffer Жыл бұрын

@bina nocht You may be slow but you 're also the cheapest option. 😊I wish you well on your endeavours and hope everything turns out as you intended.

@hans.talhoffer Жыл бұрын

@bina nocht Good luck 👍

@123MJP123 11 ай бұрын

You spent 6 months trying to find "the right video" to install wall cabinets from Ikea?!?!?! Wow.

@mr.m9636 17 күн бұрын

Palse make more video about installing Ikea! A kitchen for exempel.

@UCmdrhccjVM95UidL5idZw2Q 7 ай бұрын

Awesome!

@hans.talhoffer 7 ай бұрын

Thanks!

@Dashofvirgo 4 ай бұрын

Very useful, thank you! Where is the tabletop from?

@hans.talhoffer 4 ай бұрын

Thanks! The top is made from two wood panels I bought at my local DIY-store, though I had to cut them to size and connect the two panels with pocket hole screws and biscuits (biscuit jointer). I also did some routing, sanding and used two coats of hard wax oil with sanding in between to finish it off.

@nicewan9401 Жыл бұрын

Very helpful, thank you. Just to double check - those screw sizes are correct? The hexhead bolts specifically. 6x50 seems a little small to me (I'm no expert). Would 8x60 be a better idea for a concrete wall?

@hans.talhoffer Жыл бұрын

You know how it goes, sometimes you have to take what's there. 😉 I had these screws laying around, and taking the plaster thickness of about 1 cm into consideration the screw just about fit the 4 cm expansion plug (fixing) length wise. (Drilled a ~ 5,5 cm hole). According to the spec sheet of the manufacturer Fischer Germany the plug and screw hold about 50 kg under these circumstances. In concrete it's 60 kg, so even more. You can take a look here: www.fischer-international.com/en/products/standard-fixings/plastic-fixings/expansion-plug-s/50108-s-8

@nicewan9401 Жыл бұрын

@@hans.talhoffer Thank you very much!

@hans.talhoffer Жыл бұрын

@@nicewan9401 You're welcome!

@karend.9218 Ай бұрын

Nice video. I would have made sure the rails joined in the middle of a cabinet and not between two cabinets.

@hans.talhoffer Ай бұрын

Thanks, this is a very good tip! Aligning the cabinets would've indeed been easier this way.

@tanlelelele 10 ай бұрын

can you talk about the wooden top cover panel is it also sold in Ikea?

@hans.talhoffer 10 ай бұрын

I made the top and side panels myself out of glued wood panels that I bought from the diy store.

@olivepressdesign Жыл бұрын

Can these IKEA kitchen type cabinets just hang from those braces? And therefore no need for feet or anything else to hold up the cabinet at the bottom? Thanks so much. Would be great if you could also add the level info to the video. Such a great idea to use. Thanks so much

@hans.talhoffer Жыл бұрын

Thank you for the nice comment. Yes, exactly. No need for feet with these cabinets. As with any wall hanging cabinets for kitchens, btw. You don't have to use the ones from Ikea. What dou you mean with "the level info"?

@olivepressdesign Жыл бұрын

Thank you !!! ( I meant to ask you which lazer lever you used in the tool list in the description video, but I see it’s listed already.)

@hans.talhoffer Жыл бұрын

@@olivepressdesign Ah ok. And you're welcome!

@obiwanbartek Жыл бұрын

Hey! Great video. Will this weird IKEA washer take 7x50 wood screw, or 6x50 is the maximum diameter of the screw?

@hans.talhoffer Жыл бұрын

Hey! It very likely probably maybe will. But please don't sue me if it doesn't.

@obiwanbartek Жыл бұрын

@@hans.talhoffer Haha ;-) Sure. Thanx.

@hans.talhoffer Жыл бұрын

@@obiwanbartek Good luck! 😉

@kenbartline7223 2 ай бұрын

I am hanging one rail with two 36 inch cabinets next to each other about 15 inches down from the ceiling, do I have to concern myself with shimming any gaps? I am thinking not, since it is one rail that the two cabinets will be hanging from. However, I don’t want to be surprised hand have to do it all over. The space I am working in is 74 inches wide.

@hans.talhoffer 2 ай бұрын

Generally speaking, shimming is needed when there is misalignment between the cabinets because of an uneven wall. Just fix the rail and hang the cabinets and you will very likely be fine. In case there is some misalignment you then can still apply the shims or maybe even decide that you can live with it.

@odiseezall 9 күн бұрын

the way you put the washers upside down creates the risk of them sliding down the screw when there's weight on the rail and coming off the screw through the larger hole

@hans.talhoffer 9 күн бұрын

This way one has more space to adjust the height. An no, there is no risk of the rail coming off because the head of the screw prevents the washer from coming loose. You can try it. Pull the washer down and try to pull it off the screw. The rim of the head will prevent it.

@rafasimsim 8 ай бұрын

Danke❤

@hans.talhoffer 8 ай бұрын

Gern geschehen!

@josevelazquez1385 2 жыл бұрын

A altura se pone

@gavin_hill 9 ай бұрын

Rather than chip wall you can place spacers along the bracket to account for the bottom being out of plumb.

@hans.talhoffer 9 ай бұрын

One would then have to place spacers on the bottom as well. This would be very impractical because the spacers would have to be glued to the wall. In case of the wall being evenly out of plumb you would be right though.

@gavin_hill 9 ай бұрын

@@hans.talhoffer Shouldn't need to do that. Because the rail is out of plumb in a, let's call it, negative direction. The lower half of the cabinet to be plumb would need to dig into the wall (as shown in your video) By placing additional shims on the rail (top), you are accounting for the negative plumb at the rail making it even with the spacers (bottom). You can also do the opposite with wall cabinets, for example I removed some of the bottom spacers and added shims to others to compensate for out of plumb by up to 3mm over a metre. To add shims to bottom, simply pull the spacer out a bit then shim and hammer back in. These tips are from my recent kitchen install, and thanks for your video it helped me understand the suspension rails system!

@hans.talhoffer 9 ай бұрын

@@gavin_hill "To add shims to bottom, simply pull the spacer out a bit then shim and hammer back in. " I show this in the video at 4:38 🙂 In my opinion it was easier to remove a little bit of plastering in just 4 places than to use shims for the whole length of the two rails. Of course if your walls are made out of plasterboard you don't really have this option. In this case your solution would be the best and only solution.

@klunboxingstudio9889 Жыл бұрын

Hi what type of screw to use?

@hans.talhoffer Жыл бұрын

Hi, it depends on your wall. You can ask the guys at the store where you buy your screws.

@life_score Жыл бұрын

Why IKEA doesn’t give mounting screws with rails?

@life_score Жыл бұрын

Not just that but their instructions or even customer service reps have not much idea about screw specs

@hans.talhoffer Жыл бұрын

You need different screws for different walls.

@hans.talhoffer Жыл бұрын

@@life_score Installing and fitting kitchen furniture is not as trivial as it sounds and is normally done by professionals (who know what kind of screws to use because its part of their profession). If you hang kitchen cabinets on a wall there is serious risk of injury if it falls down.

@GAPOWERade 2 жыл бұрын

Screw bolts did not come with my suspension rail 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

@hans.talhoffer 2 жыл бұрын

They didn't come with mine either. In accordance with the type of wall you want to hang the rail on you would have to choose the right screw and dowel.

@life_score Жыл бұрын

Aren’t your alignment brackets upside down?

@hans.talhoffer Жыл бұрын

The way I put them there is more space to adjust them.

@nmsgoncalves Жыл бұрын

yes they are upside down... no the best video to follow.

@hans.talhoffer Жыл бұрын

@@nmsgoncalves Upside down? Not for the people living in Australia! Everything which is upside down for us becomes just right for them because they are living on the other side of the Earth.

@Artauld Жыл бұрын

@@nmsgoncalves Actually, I had been having trouble with the alignment brackets and then when I saw this video I realized that the Ikea instructions are likely wrong (not the first time). It seems to me that Hans' response to you makes infinite sense - these brackets when 'upside down' offer you significantly more room for adjustment and I see no downside to positioning them this way (pun intended). I'd be interested to hear others' comments on the topic.

@AlexA-qh8dn 10 ай бұрын

@@ArtauldThey are definitely upside down. If there is enough weight on the rail the brackets will slip, and the head of the screws will end up in the wider part of the holes, potentially coming loose.

@laurentprost9028 2 жыл бұрын

La complexité du système d'accrochage du haut de placard est hyper complexe. En s'y mettant à trois, nous avons mis la journée. Honte au mode opératoire Ikea

@hans.talhoffer 2 жыл бұрын

En fait, je trouve cela très simple. Je pense l'avoir démontré dans la vidéo.

@klausdommen9355 Жыл бұрын

In deutscher Sprache wäre das Video besser. Nicht jeder spricht oder versteht Englisch

@hans.talhoffer Жыл бұрын

Gibts in Deutsch auf meinem deutschen Kanal: kzfaq.info/get/bejne/oc2bmK6Il67Ie4U.html

@manuelmoreno1615 Жыл бұрын

BEWARE OF IKEA, my mother was going to install the countertop on Tuesday 12/20/2022, the IKEA order arrived on the 19th and we removed the old countertop that was broken. No one called it on Tuesday the 20th, I called to ask and they told me that everything was correct and there was no problem that they would install it on Wednesday the 23rd, they did not put it on that day either, and no one called it. Today, Thursday the 23rd, she has received an SMS, giving her a new appointment for 12/27/2022. We had planned to celebrate Christmas dinner with her at her house, she is 80 years old, but she cooks very well and likes to cook. IKEA has broken Christmas for us, I find it inhumane, unfair and cruel. We feel tremendous helplessness, everything is already paid for and we can't afford another countertop. Please, to whoever reads this review, spread it as much as possible so that no one is left without CHRISTMAS again. Thank you.

@hans.talhoffer Жыл бұрын

There are people without food on christmas. There are people who are alone at christmas. No need for you to play the victim in the comment section on youtube.