I show in detail how to wire an active sub to a cheap receiver with no sub out. Amazon Links: amzn.to/3e1DKn8 amzn.to/3e5Wl1c amzn.to/3sGZXLc
Пікірлер: 60
@jamiebishop951225 күн бұрын
You are the only person who I actually understood. Thanks.
@addismultitasking350424 күн бұрын
Thanks
@Jo-Anne_and_Michael3 жыл бұрын
Strange. I was looking for a tutorial to hook up an active sub to an amp with no sub output. Goal: boost the bass in my small condo living area. The strange part is that my amp is a Yamaha R-S202 and my sub is a Polk PSW-10...the exact same as the system in this tutorial. My sub arrives today, I will update. Update: My sub arrived today, installed as per the tutorial. Works perfectly, happy as can be.
@addismultitasking35043 жыл бұрын
glad my video helped
@jjjpetersen2 жыл бұрын
Clearly explained, thanks. Now my sub is connected to my receiver & it sounds amazing!
@addismultitasking35042 жыл бұрын
cool, have a good weekend
@BobUllrich-xi9px Жыл бұрын
Thank you!!!! Very clear and easy to understand. I'm now up and running!
@addismultitasking3504 Жыл бұрын
nice, have a good weekend
@expensivewaste559 Жыл бұрын
Thank you for this!! I've been wanting to hook up a sub to my Yamaha rs201 receiver. Appreciate it!!
@addismultitasking3504 Жыл бұрын
your welcome
@manylander2 жыл бұрын
Thank you. This is very clear, well put together and to the point. Will be checking it out soon with my system (same sub).
@addismultitasking35042 жыл бұрын
Glad it was helpful!
@sinistermoon4 ай бұрын
If I want to hook up two of those exact same subwoofers, I just hook up the left channel to one subwoofer and then the right channel to the other subwoofer? Also, would that make them stereo?
@bikexpo44 Жыл бұрын
Excellent video - I was able to configure a Yamaha RS 202 into a 2.1 with your instructions. Now extending it further - Is there a way to bring in a center speaker into this setup ? Thanks!
@addismultitasking3504 Жыл бұрын
im not sure about the center channel...I dont think so
@saltysnackkidАй бұрын
what if only my amp has a high level input and not the speakers? will the sub still work or do the subs need to be hooked up to the speakers aswell
@tw_judy4 ай бұрын
why won’t this duplicate the frequencies that cross over from the A speakers to the B sub? also what’s the benefit of doing this over just using the speaker-level output on the subwoofer?
@j.d.32692 жыл бұрын
I don't think it requires two speakers A and B, instead one should be fine.
@peterderidder99229 ай бұрын
Thanks for shearing youre knowledge, BUT I have a old pioneer SA-9500 would this system also work on a vintage amplifier ? ? I suppose the sub must have a 2 speaker inputs to make it work ??? please educate me . Sorry for my bad enlish writing ;-)
@muhendisabi1697 Жыл бұрын
Why you did not use the speaker level autput to speaker?
@justint56252 жыл бұрын
Thanks brother actually picked it the same sub
@addismultitasking3504 Жыл бұрын
cool enjoy
@justint5625 Жыл бұрын
@@addismultitasking3504 currently 🤙
@GEMPACKAGINGSYSTEMS2 жыл бұрын
Great description! I have the same receiver with Yamaha NS-6490 3-way speakers. Can I add a subwoofer as you described?
@addismultitasking35042 жыл бұрын
yes you can add a sub
@GEMPACKAGINGSYSTEMS2 жыл бұрын
@@addismultitasking3504 Thank you very much for help and quick reply!
@JorgeCantu17 Жыл бұрын
Would that receiver struggle if I add the same subwoofer to a pair of klipsch Aw-650?
@andersonhoffmann8284 Жыл бұрын
Great Video! Thanks... from Brazil
@addismultitasking3504 Жыл бұрын
Thanks for watching
@DavidCulbertson643 жыл бұрын
Great video. Do you have to set the low pass level? I'm assuming yes and that you set it to be near the low-end cut-off for your bookshelf speakers. (example: if your bookshelf speakers are 60-20,000 HZ, you set the subwoofer pass level at 60 or perhaps 100)
@addismultitasking35043 жыл бұрын
yep set at 80
@DavidCulbertson643 жыл бұрын
@@addismultitasking3504 Thanks!
@ProfDrTestkees3 жыл бұрын
How could you connect a subwoofer like this without an RCA input, on a more recent amp. For example an Onkyo TX-RZ 820 (7.2 channel) which doesn't have A/B but just normal speaker connections.
@nicholaslibertyrx53222 жыл бұрын
I have a sub that has has speaker inputs and speaker outputs similar to the one in the video. I have connected the front left and right channel speaker outs from the amp into the left and right speaker inputs on the sub. Then connected the left and right speaker outs from the sub to the left and right front speakers.
@nhat_is_da_le3 жыл бұрын
How would I hook it up if I also have a center speaker connected to the receiver? That's the only problem I'm trying to figure out. If I can make it happen.
@gurbirsingh8689 Жыл бұрын
Thanks alot very helpful vedio
@addismultitasking3504 Жыл бұрын
Thanks have a good day
@PS4PROGAMER5456 Жыл бұрын
Oh it does
@kremata Жыл бұрын
First of all you could just use the REC out of the amplifier and second you only need speaker A. All powered subs have internal crossover and can filter by themselves.
@xxxYYZxxx5 ай бұрын
I love the garage system but it's best to just run 2 sets of wires from the receiver and avoid the sub's high level output except when daisy chaining identical subs. Besides being a better electrical connection, it's easier to place the sub and speakers when they're not connected by wires. You don't need or want thick wires running to the sub either, as only a trickle of power goes to the sub. For aesthetic purpose, the two wires running to the sub can be sheathed in a single braded cable jacket, the ends fastened with shrink tube or small zip ties.
@PS4PROGAMER5456 Жыл бұрын
Does youre sub have a in buit amp
@derrellcochran68076 ай бұрын
What if I don’t have a subout rca on my receiver to run to my amp, what can I do ?
@xxxYYZxxx5 ай бұрын
You can use a line-converter. These are typically 12v devices used in car audio, but a home version may exist, or easily hacked with a suitable 12v adapter. Run the high (speaker) level to the input, and the line converter outputs via an RCA connection to your amp.
@zithulelemcunu83932 жыл бұрын
Hi os there strain that the amp I going to take by connecting a sub
@trooooyyyyy2 жыл бұрын
hello i have a pioneer xvdv303,can i connect a powered sub to it?
@chrisrussell54983 жыл бұрын
What's up with your sub? Terrible distortion at the end of video?
@addismultitasking35043 жыл бұрын
its the mic, the sub is perfect
@atwoodb12 жыл бұрын
My receiver is a Pioneer vsx-d602s, when I did this with my Polk audio powered sub it would work on all sound modes except Dolby surround for my theater settings. Is it acceptable to plug the sub into my A speaker port, and then plug my front tower speakers into the other two inputs on the back of the subwoofer?
@addismultitasking35042 жыл бұрын
I have one hooked up that way put towers on a and sub on b. I did a video on how to hook that up
@daliborsmiljanic9950 Жыл бұрын
Is it possible to connect 2 active subs to such a receiver without a sub pre-output, Thank you
@addismultitasking3504 Жыл бұрын
yes Ive done that
@robertryder48572 жыл бұрын
I have a Marantz 2230, if I use the b speakers for the sub, am I cutting the power to my A speakers in half?
@addismultitasking35042 жыл бұрын
if its a powered sub then no
@reactions34852 жыл бұрын
Can i use passive sub on onkyo 5.1 receiver from sub pre out option plz tell me
@estoylisto2 жыл бұрын
What is the model of your Onkyo ... from what I know that lower end Onkyo (as mine) have a channel to power a passive subwoofer but doesn't have a pre-out to connect a powered one ... In general pre out are (RCA output) that needs to be connected to an amplifier to run a subwoofers... while channels are amplified ports that can power a passive speaker/subwoofer
@reactions34852 жыл бұрын
@@estoylisto model is onkyo tx-ds575 5.1 receiver , it has a pre out option but doesn't have sub option , so i have a 6.5 inch jvc passive sub so can i use this sub from this receiver ?
@reactions34852 жыл бұрын
@@estoylisto i am using this subwoofer from front channel option but i don't gets power ful bass
@estoylisto2 жыл бұрын
Subwoofer usually need more power than speakers and that could be the reason ... also I checked the manual for your unit and it doesn't have a channel to power a passive Subwoofer ... If you have an active Subwoofer you can use the pre out port. Just check that you have set the Subwoofer option to 'on' in speaker config ... Finally if you decide to continue using your passive Subwoofer, I'd try to A) connect it to left front speaker channel (a and b for extra power) ... B) set the front speaker to Large in the config so it would receive the low frequency signal ... C)then connect the front speakers to the surround ports and set the 'listening mode' in the quick menu to "all ch stereo" so the surround speakers receive the same signals of front speakers and you should end up with 3.1
@shoerice5083 Жыл бұрын
You realize that most subs don't have this wire connection nowadays.... Mine has a single RCA LFE connection