How to HyperDip Your Wheels (The COMPLETE Guide)

Рет қаралды 184,496

Күн бұрын

🚗 Shop All Kits - www.dipyourcar.com/pages/yout...
🎥 Dip Your Car Complete Video Guide- • Dip Your Car - The Ent...
📙 Learn how to dip here - www.DYCUniversity.com
💦 DYC Detailing Suite - www.dipyourcar.com/collection...
👕 DYC T-Shirts and Merch - www.dipyourcar.com/collection...
❤️ Please Subscribe to DYC!- kzfaq.info?su...
👍 Join our FB Group - / dipyourcarcommunity
👍 Follow Fonzie on Instagram! - / fonzie
👍 Follow DYC on Instagram! - / dipyourcar
DipYourCar.com is world famous for peelable car and wheel paint. You can change the color of any part of your car by yourself! A do-it-yourself product that you can use at home and is totally affordable. Contact CustomerService@dipyourcar.com if you have any questions about DipYourCar or Plasti Dip Products. Spray and paint your wheels, your car, your emblems, your trim - basically anything. Peel it off and go back to the original color when you are ready. Durable, easy to clean and maintain, dipping your car is something almost anyone can do!
00:00 Introduction
00:10 Materials Overview
01:36 Brake Masking Bags
02:50 Dip Release
03:43 PreDip Spray
04:50 Alcohol Pads
05:28 Spraying Demonstration
07:15 Spraying the Wheel
08:39 Rotating the Wheel
09:20 Breaking down the Wheel
10:23 Outtro
10:50 End Results

Пікірлер: 232

@biohazard7276 8 ай бұрын

Another tip I like to use is to jack up the wheel you're spraying so you can spin it while spraying. Makes it easier

@christianthegrayt 9 ай бұрын

Made it look easier than I expected! I will definitely do this now. Thanks again.

@hotrodchevy4524 9 ай бұрын

I always Remove the wheels for Painting or Dipping, because that way you can get all the spokes and the complete area of the wheel without moving the car. Also so you don't Spray the lugnuts or the Center cap, and so you don't have to worry about over spray on the Suspension, inner fender and the fender, but whatever works best for you. As Always Great Work Fonzie. Thanks for the Great Tutorial.

@tlsmith1970 8 ай бұрын

that is what I was curious about - how do you prevent the overspray on your car? i'm thinking of doing this, but would want to remove the wheels first

@iTrinityPlays 7 ай бұрын

@@tlsmith1970 You can mask everything off, but it's a lot more work instead of just removing the wheels.

@Itsgabe_ 4 ай бұрын

For wheel face dipping leaving the wheels on is the easiest and safest(not everyone can remove wheels and torque them back down correctly or feel comfortable doing so) way to get it done. Spraying barrels yes, you have to remove the wheels. As far as dip overspray you don't really get any overspray on the suspension when using aerosol cans along with the brake masking bags and even if you had a small amount of overspray it wipes right off . With paint that's a different story. With dip aerosols you have control of where the product goes. Even if you overspray on the fender or fender liner the dip wipes right off with a microfiber towel. If there's any worry shove some paper in the wheel well and a piece of tape on the edge of the fender.

@jabbawakka7286 9 ай бұрын

Such excellent information, results, and videos in general, respect and blessings from an old Kiwi 😎🇳🇿😎🙏

@anthonycerase7725 5 ай бұрын

If you dip wheels including lug nuts, will it come off during tire rotations or any sort of lug nut removal?

@rambo6375 9 ай бұрын

Excellent work panzi👌

@dazedapparition7845 8 ай бұрын

Do it. I was skeptical. 6 months. 5 coats. Still look great. NC.

@dopeboyp3487 17 күн бұрын

Do you go thru automatic car washes? I’m curious as to how it’ll hold up.

@robertsavello4120 3 күн бұрын

how does it look now?

@warlockedown9159 Күн бұрын

I've had mine on a truck for 2/3 years. Off roading, snowy roads, car washes, etc - still holds

@dopeboyp3487 Күн бұрын

@@warlockedown9159 Thanks. Does it still look freshly applied, or is it showing signs of wear?

@barneyboyle6933 3 ай бұрын

really good guide

@alvarortega2 9 ай бұрын

Back to basics, cool!

@marchector2387 9 ай бұрын

Respect sir from England

@lloydbellis7360 9 ай бұрын

That was very informative. Thank you 👍👍👍👍

@TimeeJustin 9 ай бұрын

I’d like to see more rim videos. Try all kinds of different colors and all that.

@markm5119 9 ай бұрын

I've been commenting this for a while! Also see if he can do some interior accents to match the wheels or car color!

@TimeeJustin 9 ай бұрын

@@markm5119 that’s a great idea

@MobileIndifference 9 ай бұрын

Your spray can game is unreal

@noahschechtel8979 6 ай бұрын

Great video!!!can I do this in my new sienna..it has plastic hubcaps that are factory glued on?

@alisonmary1443 9 ай бұрын

I am hopeless with spray cans and probably brushes that's why I found this so interesting, perfect.

@noahschechtel8979 3 ай бұрын

great video. just finished my emblem kit. Question: what is the procedure for doing all 4 wheels at the same time?

@garethdavies3175 9 ай бұрын

Respect from Wales

@SeanCorlew 9 ай бұрын

I kept trying to think of a good name for this very intense shifting color combo. From a straight on approach I can't help but think Arizona sunset but from the side I see northern lights so all in all it's on big NET PLUS ULTRA or Calamity. Either way this is a five all the way guys what great content!!!!

@mehedihasan-ef7yg 9 ай бұрын

Love from Bangladesh 🇧🇩

@bobbywallace6403 9 ай бұрын

Need to order my kit asap

@botanicalstig 9 ай бұрын

My kit comes tomorrow, perfect!

@ConvictedMarketer 3 ай бұрын

How did they turn out?

@oseifraser5407 24 күн бұрын

Yeah, how did it ?

@ConvictedMarketer 24 күн бұрын

@@oseifraser5407 I did mine bro. Best decision ever. I ended up doing my rims, all the emblems and the roof on my car with 1 kit

@Friedbrain11 6 ай бұрын

What color is that on the car? Love the shifting greens and touch of blue!

@johannesessmann201 8 күн бұрын

Enjoyed it, living right now in Germany and can't buy it yet, have to wait for summer 2024 :D

@simonfarmery7356 8 ай бұрын

Is the finish coats thin enough to not effect your wheel nuts?

@unclejun4723 8 ай бұрын

How long does it take to fully cure (/before driving the vehicle)?

@blkeclipsel2400 14 күн бұрын

Theres one particular brand/design of wheel that I've wanted but haven't pulled the trigger on because they dont come in black with a machined lip. It's just silver with a machined lip. Thanks to you guys, I can finally buy those wheels. Ill just use blue masking tape for the machined lip. They should be easier too because they are concave five mag wheels and I'll paint them before putting on tires.

@sethhenning9372 9 ай бұрын

Is back masking the wheels a bad/ or safe idea to keep all over spray out?

@uDubRiceBoy 8 ай бұрын

Can I spray 1st 2layer with plasti dip and last 4 Layer with hyperdip?

@paserpase2870 9 ай бұрын

What colorshift is on the car, I wanna use that on my 2006 zx10r,

@patotaku007 9 ай бұрын

Could you guys do ZTH with racing stripes in the future? A black base, white stripes and ZTH on top of everything?

@SillyMonkeysLikeApples 7 ай бұрын

doesnt the paint stick in the bolts? making hard to take the wheel out if necessary?

@ericgordon9297 10 күн бұрын

3/5 but white base looking good 👍

@teknykill 4 ай бұрын

Fonzi How long after the wheels are painted/Dipped can I use the Dip Protection ?

@nathanwhite5602 9 ай бұрын

That was cool 😎

@joshfernandez3809 5 ай бұрын

Can you hyper dip the plastic portion below your bumber? Will it last the same as when you hyper dip a wheel?

@Redwheelie 9 ай бұрын

Any thoughts on a wheelchair kit?

@hamie63_m 9 ай бұрын

I was just thinking we need a new wheel tutorial

@dipyourcar 9 ай бұрын

Agree, this is a bit overdue.

@sweetdees86 9 ай бұрын

Any tips on a bare wheel? No tires or any primer on the wheel. Getting mine media blasted to start from scratch and want to play around with different colors.

@dipyourcar 9 ай бұрын

@@sweetdees86 Would suggest getting the tires on the wheels first before you spray them (unless you just want to test first). Bare wheel should be just fine, but keep in mind it may be tougher to peel the dip off as the bare wheel will likely grab a bit more.

@chrishavlykke2277 6 ай бұрын

Maybe I missed it but are you supposed to wait in between coats? If so how long do you wait in between the four tack coats? How long are you supposed to wait between the wet coats?

@dipyourcar 5 ай бұрын

Tack coats flash quickly, 4-5 mins between each. Then for wet coats it depends on your ambient temps, but usually 15-25 mins on average. The colder it is, the longer the coats take to dry.

@elephantmoney 4 ай бұрын

@@dipyourcar Is it okay if we waited longer in between coats? Like if we do one wheel then go to the next for all 4 then go back to the first one?

@jordanvanderwerfhiphop Ай бұрын

when you apply the dip-release do you need to make sureto get it right next to the wheel? - and then use the pre-dip cleaner to remove it from the wheel edge? isn't it nearly impossible to get that line perfect? so which is more important, having the dip-release REMAIN RIGHT next to the wheel? or making sure the wheel is 100% clear of dip-release?

@user-bs9td6hv3z 8 ай бұрын

11:06 can hyperdip be used to correct curb rash on the wheels?

@dontmesswithtexas77 2 ай бұрын

i had some issues with dust of spray on the car cause it wasn´t covered. Maybe you can put a car cover over the car and open the wheels only.

@georgedomse 7 ай бұрын

How much time between coats?

@DidiotLawz 9 ай бұрын

Can you show us how to do stripes ?

@diydame7163 9 ай бұрын

I would really like to see a removal video where you take the dip off a car you have sprayed. That would be really interesting.

@clearfuture2020 8 ай бұрын

Yes p PLEASE

@Itsgabe_ 4 ай бұрын

There's a few out there

@iTrinityPlays 7 ай бұрын

Hey Fonzie, is it fine to dip your wheels, that are already Ceramic coated?

@tohrmentrixabyss1713 8 ай бұрын

I just wish you sold the same kits on the Canada site

@Leon-tf4qn 9 ай бұрын

Does one wheel kit do all wheels in the car? Lmk bc if they do i'll buy

@MickeyScalzo 2 ай бұрын

Will ti work over chrome?

@Samestori214 6 ай бұрын

Should we mask the valve stem?

@B.F633 9 ай бұрын

Spectacular "!!!

@chickenpasta7359 12 күн бұрын

Instead of using the predip on your sidewalls could we also use painters tape? I feel like that would be a lot cleaner at the end and way less hassle after

@mrjprocks 6 ай бұрын

How long do you wait between tact and wet coats?

@CHE408. Ай бұрын

Can you use these same hyperdip dip on emblem and wheels?

@Titocorrea650 14 күн бұрын

Can I apply this if I have scratches on my wheels? Or do I have fix the scratches first?

@fozzybear9114 3 ай бұрын

Longest shipping of all time. Order sat in fla for 4 days before they shipped. Hope product meets expectations?

@johnk1368 8 ай бұрын

Do you recommend leaving the lug nuts on? Doesn’t the dip come off them once you rotate or change the tires?

@thebigbeatdown 5 ай бұрын

I'm curious about this as well

@pontiaco 25 күн бұрын

Do you guys if it would hold up in the front bumper, chips and rocks etc??

@fte170 9 ай бұрын

What about the valve stem. Do you put the release spray on that or do you just try and avoid spraying it?

@dipyourcar 9 ай бұрын

You can mask it, leave it or peel it - personal preference

@fredtrujillo8275 9 ай бұрын

Great video! Just Hyperdipped my 2019 Silverado OEM 18" wheels yesterday with Brass Monkey. Came out great, two small imperfections but only I'll notice. I feel that maybe a 6th can would have been perfect. I removed the wheels to make it easier for me plus it allowed me to add dip release inside the rim since I didn't want overspray there. After applying dip release to my all terrain tires, there was still plenty of dip release to coat the inside of the wheels. I couldn't find anywhere on the website about time between coats, but at about 5 min of spraying per rim it worked out to about 20-25 min between coats. Spray handle is a must hahaha!!

@GR_Astrophotography 9 ай бұрын

Be careful adding Dip Release to the wheel itself you can have an edge start lifting due to this. Dip Release is meant for tires. If you want the barrels to not be sprayed you will want to either mask them off or use some naphtha and a microfiber towel after the wheels are dipped to remove any overspray.

@dopeboyp3487 17 күн бұрын

I want to do the 18in factory wheels on 2024 Sierra AT4. I don’t understand why GM didn’t go with black wheels instead.

@mrjayfamily5348 9 сағат бұрын

Bro can u please help me before I make a mistake .. if I use the same product as yours so when the wheels get dirty can I use purple power chemical to clean .. am. It sure if this chemical effect the hyper dip .. can u please let me know .. thank you for your time

@d3m3nt3d8 9 ай бұрын

Can you please do an updated video of spraying a whole car as well

@dipyourcar 9 ай бұрын

Yes! Later this year

@angelv8414 3 ай бұрын

Can you paint just segments of the rim?

@benhicks7238 2 ай бұрын

Set of four 18 inch wheels and I was only able to get 4 tack coats and 3 wet coats out of the wheel kit. I mean it looks great but idk how you got that many coats with just 5 cans. I only have 5 spokes on my rims so not nearly as many as you had in this video I just don’t get how you got that many coats.

@tyebuck76 4 ай бұрын

Would it hold up going through a car wash?

@jainjoy2385 6 ай бұрын

Nice❤

@ihabahmed1132 Ай бұрын

The ambient temperature in Saudi Arabia can arrive up to 55 degrees C can i use Plastic Dip to paint my car

@eskudero7 3 ай бұрын

How long should I wait between coats?

@Jyx01 7 ай бұрын

Just bought my first kit. How much time should pass between tack coats and wet coats?

@j0lla127 4 ай бұрын

Crazy how he doesn't explain the time between each coat. LOL

@BrianXXIII Ай бұрын

How long between tac coats should i wait?

@sweetJAMcneil1 2 ай бұрын

I want a kit in fusion pink!!

@joe7157 3 ай бұрын

I am confused about how to split 5 cans into 4 wheels when for plasti Dip you say to use a whole can per wheel. Please help.

@CHE408. Ай бұрын

How long you have to wait for each coat?

@grisslebear 9 ай бұрын

Could you please explain a bit more why to not lay the wheel flat?

@GR_Astrophotography 9 ай бұрын

The pickup tube in the aerosol can can catch an air bubble and cause the cans to spit. Keep the can upright to avoid this.

@mrbuckeye9272 5 ай бұрын

Can you pressure wash the wheels??

@mygt8a4re 7 ай бұрын

I'd like to see Fonzy do a two tone wheel, leaving the factory color on the lip and barrel, and a hyperdip color on the spokes for a custom look! C'mon Fonzy, show is a two tone! 🙏

@kevinlamoreaux5931 Ай бұрын

My wife and I love the color. We would rate it a 5 for the color.

@davidking3699 9 ай бұрын

Do you recommend masking off / using dip release on the centre cap, wheel nuts and valve stem? or just pealing off the dip?

@dipyourcar 9 ай бұрын

Peeling is always the cleaner option when possible.

@frankscheers5234 9 ай бұрын

@@dipyourcar I was also wondering about how y'all handled the lugs and valve stem.

@Charlie_Waffles 9 ай бұрын

that looks like ihave to train my fingers witha cable machine in the gym first for all the pressing of the spray can nozzle 😂😂

@Lys12v 13 күн бұрын

How long does it last ?

@Mr.imjussayn 7 ай бұрын

How long does this last?

@louwho8298 7 ай бұрын

Hello, I was wondering if you could provide me an email so I can send you some pictures of the paint. I did a chrome delete on my window trim and had most of it peel off no problem, however when it came to the quarter panel it will not come off. I was wondering if you have a solution to this. I used every paint remover including yours.

@gbmccarty4 8 ай бұрын

What color is this

@carolekofmehl7284 7 ай бұрын

Love the shift, BIG fan of purple but don’t particularly like it on this car. 4/5

@boxmonkey1 9 ай бұрын

Please, PLEASE, do ZBB over a lighter base like blue or grey! PLEASE!!!

@dannewton5363 9 ай бұрын

Good one Fonzie, also can we get a new "how to dip a pickup truck video?

@dipyourcar 9 ай бұрын

We have a couple of those on the channel already!

@sanghelli53 9 ай бұрын

Y’all ever done a semi?

@RoseGoldBeastInTheStreet 6 ай бұрын

Save your money and get your wheels powder coated. I picked up piano black and spent most of a saturday afternoon to blackout my wheels. Finished look was pretty great honestly, especially at a distance. Was going to buy the grill/trim kit but after only 3 months, a large area of the dip has lifted off on one of the wheels, and the lugnuts on another wheel have had the dip come off. "Customer Service" has not replied to 3 communications over the course of a week and change. Not great.

@timothybraden6611 4 ай бұрын

What is the workaround for getting the dip on your lug nuts it changes the diameter and makes it difficult to take them off if you have to service the tire or say the brakes.

@GrowingWithDragon 3 ай бұрын

Take the rire off before you spray

@Nickjc2012 9 ай бұрын

One day 😊

@trentoncook8487 9 ай бұрын

Can you use a presser washer on these when cleaning your car?

@dipyourcar 9 ай бұрын

Yes, but of course need to use common sense along with it. Don't bring it too close, as a pressure washer can even damage OEM wheel finishes

@PirateNation2005 9 ай бұрын

Also seen people use playing cards to block the tires.

@theboo4u 8 ай бұрын

Has anyone else gotten dripping/leaking cans? Is there a trick to it, or just manufacturer defects?

@flatmatt123 9 ай бұрын

What is recommended to do a job like this if a garage for your vehicle it’s not an option? Car parked outside for example.

@dipyourcar 9 ай бұрын

People dip wheels outside all the time. I wouldn't recommend for whole cars, but wheels no problem.

@xstablishedtv 6 ай бұрын

How is it going through a car wash?

@Arkie80 9 ай бұрын

Enjoyed watching another How-To vid. It's been a wheel since we saw one. (See what I did there?)

@E30_89_lifestyle 9 ай бұрын

What color is on that car

@jamc666 9 ай бұрын

i. have. to. do. this. 🤩

@Erinnem 9 ай бұрын

My BMW had dipped wheels when I bought it and that stuff is chipping off and looks so bad how do I take it off all the way without damaging the rims?

@dipyourcar 9 ай бұрын

Sounds like someone either used far too little dip, making a thin and brittle coating. That or it's not even genuine dip. Dip Dissolver and a pressure washer should make quick work of it if it is actually dip.