Engineer at Intel here, this helps! Thanks, thesensorconnection!
@thesensorconnection4 жыл бұрын
Glad to hear you found this information helpful. Thanks for letting us know!
@majharulislam5950 Жыл бұрын
Could u kindly give us the resistive vale chart for all these kind of thermocouples.
@coachgeo2 жыл бұрын
my wires go into a potted mess of epoxy. Ive no way to see colors of wires. any other ideas on how to determine?
@chrisakabr34k61 Жыл бұрын
Check with a magnet. One will be magnetic, the other won’t be. But I can’t figure out which is which
@lijo1694 жыл бұрын
This is very useful, thanks. Can I replace old 'k 'type with new 'j' type without changing PID(temperature controller). (Process temperature 0-200 deg celsius )
@thesensorconnection4 жыл бұрын
Only if your PID controller is compatible with Type J thermocouples. Many PID controllers will work with different thermocouple Types, but there are some that will only work with one thermocouple Type. If your PID controller will work with different thermocouple types other than just Type K then you'd need to change the Controller's input type setting from Type K to Type J. To perform this task we suggest you consult with the PID controller's user manual or the manufacturer.
@normasumption23653 жыл бұрын
AaaXaqbr
@georgepotter3533 жыл бұрын
I have a multimeter with a type k thermocouple. It’s a flimsy little wire. I also have a few spare thermocouples used in kiln that are type k. Can I use one of the larger kiln thermocouples with my multimeter. Will it read the temps the same as the little wire one ? I want to use it to test my kilns when I suspect a thermocouple is starting to go bad, but I don’t think the little flimsy wire one would hold up.