how to IDENTIFY jack points on your car

Рет қаралды 543,493

6 жыл бұрын

Пікірлер: 98

@Rinifi 3 жыл бұрын

Identifying the jacking points on unibody construction car is not the problem for me, it's identifying the points where the jack stand should be placed after the car is jacked up.

@JB-tz9pi 2 жыл бұрын

exactly!

@qt1622 11 ай бұрын

Man . This is the comment . It’s so many of these videos but none answer this question. It’s almost like rocket science at this point

@Yamommasblubber Ай бұрын

The sides are your friend, my cars lowered so it’s a bit more annoying for me but I get the jack under the side first and if I’m doing the front I just slide the stand under the front cross member

@TheTenshi777 3 жыл бұрын

Thanks a lot, good sir. Because of your video I changed my tires with no issues. Regards from the Caribbean!!🙌🙌

@griffmustard 4 жыл бұрын

I was expecting this guy to say at the end........ " We'll leave the light on for ya "

@conniecostner9665 5 ай бұрын

Lmao. Love it

@thecrackedscreenspodcast 27 күн бұрын

😂

@Mike-we3rb Жыл бұрын

“How to identify Jack points” my way is to start knockin around as if I’m a door to door salesman under the car

@Anydai 5 ай бұрын

🤣🤣🤣🤣

@izzie1975 Жыл бұрын

Wow this was the simplest instructions thank you For teaching how to find the jack points this has a been a stress every time I have to do car work I feel educated thank you again

@jthadcast Жыл бұрын

ok, now show where to jack when the designated jack points are rusted out and crush under weight of car.

@ronaldblack7419 3 жыл бұрын

Why am I picturing a character from a classic western with that voice?

@DrRussell 2 жыл бұрын

So much valuable information thank you for taking the time to share.

@pravinshinde1478 Жыл бұрын

Great video with many little details that one would learn only with experience!!!

@khatijahbaharuddin7304 2 ай бұрын

Easier than finding the g spot. Thank you!

@AA-kf2fp 4 жыл бұрын

This was really helpful. I have a very old car and I had a lot of trouble finding the jack points. Thanks!

@skimmy90 10 сағат бұрын

Question: My manual shows the jack points. I'm assuming it's intended for using the scissor jack it comes with in the trunk. If I want to use a hydraulic jack and use the jack points, how do I identify where to place the jack stands? The area around the jack points on my vehicle is all flatten plastic and if the hydraulic jack is on the jack point, where do I put the jack stands? there is a plastic cover under my car i need to remove to even see the frame. It looks like the newer vehicles try not to put any information on how to service your vehicle and are trying to force you into the dealership servicing department. My car has a cover underneath my car so I can't even locate the frame. Not sure how i'm suppose to take the cover off. I don't really want to get under there while the hydraulic jack is holding up my car.

@Sleeplessinsimi Жыл бұрын

Thanks! Could you show us the jack points on a 2014/2015 Chevy Spark? These cars no longer come with jacks and lug wrenches. They come with tire repair kits. Ok but there are still times you need to jack the car! I am trying to teach my daughters how to change their tires and I am not certain where to place the jack. I would greatly appreciate it. Thanks!

@blakespower 3 ай бұрын

is there any alternative place to jack a 2010 ford fusion? because the rocker panels are rusted out in the rear

@marinas2413 2 ай бұрын

THANK YOU SOOOOO MUCH!!! .......I almost messed up my car because I didn't know this......I haven't changed a tire in my life and my father passed away before he could show me how and to explain it .......thank you so much❤❤❤

@drippingwax 2 жыл бұрын

Yesterday my car fell off the stands and I am trying to find a jacking plate, so be careful when working in deep gravel.

@rodb4523 Жыл бұрын

Simple and clearly put sir!

@tom-xz4ox 4 жыл бұрын

the jack points on my Starlet weren't very obvious, this video helped me out, thank you

@BlondieSL 2 ай бұрын

We have a 2016 Honda CRV AWD. The jack points are what I use all the time. However, I would like an opinion on something, because I'm going to buy one of those pneumatic, air bladder jacks (balloon type) to make life easier. Sure, I can lift the car from the usual spots. However, I wonder if it would be ok to lift on that frame part that is between the 2 jack points? The jack points, which jut down, are part of a kind of frame thing which goes between the 2 jack points. But I don't know if the center is as strong as where the jack points are. So I wonder if there's anyone with experience in this? Thanks in advance.

@PeterPerhac 7 ай бұрын

Look at the manual? yes. My problem is the manual is shite. And the graphic identifying the points is as clear as mud. Thanks, this was a great video. I learned a thing about the torque wrench. Might be too late for mine... but I'll remember to release the pressure on it in the future

@rlarviso 4 жыл бұрын

Darn good useful video practical thank you

@bythebay2008 2 жыл бұрын

If you know, after a while you forget. Nice reminder. Very helpful.

@baristatraveler8038 Жыл бұрын

Very helpful. Thanks!

@thisisyoutubetv3235 2 жыл бұрын

You have a nice vibe to you men Keep it up

@kawsara5366 2 жыл бұрын

This is something you would see on interdimensional cable fron rick and morty

@marinas2413 2 ай бұрын

....also I had a really strong feeling to check KZfaq about this before trying just by someone telling me to just jack up the car and unscrew the lug nuts.......but I found out here to NEVER unscrew the lug nuts when it's on a jack.......I believe that God sent that strong feeling to check KZfaq 1st........thank you and God for helping me.....I have no one that can help me right now and you basically came to the rescue without even knowing it....thank you again ❤❤❤

@catprints Ай бұрын

Yes, this guy is good because he learned from his mistakes! I took automotive classes in college for fun to be able to work on my own cars properly and because I like to know the why of things and how to prevent or extend time between failures through lots of research, and dont want to get ripped off by mechanics (I am a scientist at heart so every think goes through a scientific process in my mind). I have worked with several guys on fixing their cars in their garage and every man I have ever know (except a master mechanic who had worked on everything from tanks to school buses) did lots of things VERY wrong and you cant tell them they are wrong because they will say they have done it like this before. What they dont understand is yes, you can do something wrong and it wont immediately fail but in a yr or less it will and you wont know it what it was or even when it fails in a big way until there is an accident. I had a question for a neighbor and he ended up putting on my brakes which I did not want him to do (he thought I was taking too long but mistook caution for lack of knowledge) and ended using a product for airplanes that he thought was better because it was rated for airplanes! I said just because it is rated for airplanes doesnt make it better. Turns out I was right. After looking into it, it only goes to 300F which is not high enough rated for brake work and he didnt put lube where the piston meets the back of the brake pad (which already had a tiny nick in the rubber) so now I have to redo it in 100F heat. I HATE when MEN try to pretend to KNOW something when they never even bothered to read instructions or learn or look into something with some depth! My god, with computers how easy is it to look something up these days! The vast majority of men I have found, do things very incorrectly and only by the grace of god or pure luck do they end up not killing people. If people want to disregard the instructions, fine but make sure you read them 1st and have a damn good logical, well researched alternative. Dont just start using whatever sounds good and then give it to someone with a family of children and act like you KNOW it will work when you havent even used it yourself long enough! Men are the worst about safety. At least this guy has paid attention to mistakes and made corrections even if he didnt read instructions that came with the adjustable torque wrench (not all of them come with it but men are notorious for not reading anything anyway). Simply put, there are some really great tips in this video that should be stated by ANYONE trying to show others the CORRECT way to do something. There are times people need to be creative and go against the standard practice BUT you NEED to know what is the standard practice to begin with before you start making alterations and I have found that most guys that work on cars, dont even know very basic safety practices. This video gets my very rare stamp of approval, very well done sir, you have addressed some important things that others do not.

@lucashearne 2 жыл бұрын

Great video. Thanks.

@michaelkeymont501 Жыл бұрын

Damn good point about the grain of the wood. It’s scary just to think about the grain splitting 30 minutes after you think you’re all good…

@DirdeeD Жыл бұрын

I don't even know what the hell he's talking about with the grain of the wood. I just don't get any of this stuff at all.

@tomkelsey3512 8 ай бұрын

If you go with the grain along the lift point, the wood could split, go against the grain for more strength @@DirdeeD

@blackgold2029 3 ай бұрын

Very informative! Thanks!

@davehardy9555 Жыл бұрын

Definitely useful!! Thanks!!

@wesh388 10 ай бұрын

Really helpful, thank you so much!

@jacquelinebishop8465 Жыл бұрын

I used my head like you said but my car weighs2 ton ? I struggled to raise the car an inch . I'll buy a trolley jack and should find it easier

@TariqBusy Жыл бұрын

Thank you! Just helped me big-time.

@chaos0987654321 Жыл бұрын

The manual on my jeep patriot says to look for "the triangular cutouts on one of the flanges in the sill flange assembly" and the pictures are from the worst angle and too far away any advice on what im looking for?

@BastetNoodles Жыл бұрын

Yea...my manual just tells you to use the jack up point & shows a line drawing

@chaos0987654321 Жыл бұрын

@@BastetNoodles found better videos by searching my vehicle modle and where you put jack stands on it

@carloscrod_ 3 жыл бұрын

Today I fucked up. On my Toyota Corolla it has these rubber circles and I thought it was the jacking point and in both front seats I dented in the floor. I stomped it down but now it’s sorta cracked..

@c389175 2 ай бұрын

Thank you! This video really helped me out this morning

@benjamincompton9767 3 жыл бұрын

Sounds like mechanics with Dennis rader

@TheOriginalVersatile 4 жыл бұрын

How about video where to put Jack stands

@RjLevesque 3 жыл бұрын

At the lift points

@Nimmy.. 2 жыл бұрын

Witch head do i use one on my shoulder Or the one in my pants

@mf____ 2 жыл бұрын

These are good cars. Try to find these for an older peugeot :D

@jamiewalker8772 2 жыл бұрын

Thumbs up well deserved 👍 Such a simple video, all others make it sound like you’re probably in over your head lol

@livefree6878 2 жыл бұрын

Thanks! Appreciate it. 👍👍

@jamiewalker8772 2 жыл бұрын

@@livefree6878 world needs more people like you bro

@jamiewalker8772 2 жыл бұрын

@@livefree6878 so many smartasses everywhere. You kept it simple.‘I’m a veteran but I still wanted to double double check im not about to put a hole in my evo x/ edit/ I should have loosened the nuts before jacking &putting on axles stands 😂

@BrianPollock-db8ks 4 ай бұрын

I think this is the worst instruction video I've ever seen. He points out many things, but almost nothing is in the camera view. Might as well not had the camera on at all.

@crashas1515 Жыл бұрын

very helpful

@lucifchristo 3 жыл бұрын

And what are you supposed to do when your jack point doesn't leave any room to put in a jack stand

@calvinmitchell6381 3 жыл бұрын

Put your Jack stands in the same place as the jack. Check out Rennstand safe jack

@lucifchristo 3 жыл бұрын

@@calvinmitchell6381 been wanting these for a while now. Got a unijack in the meantime but its too tall for my 05 outback but im trading it for a 00 s10 zr2 in a week so ill be able to use it finally lol

@terrygriss4132 Жыл бұрын

If you want to use the stands at the front jack on the rear point the whole side of the car should l raise up

@alfx5432 11 ай бұрын

My honda jacking points behind the wheel are badly rusted

@fawzisdudah8511 11 ай бұрын

Subbed like and commented😊

@martyhawg 2 жыл бұрын

Is that Ben Stein narrating?

@mikhailchyorny7275 2 жыл бұрын

Thanks .

@donf3739 3 ай бұрын

Lifting under the double welds is not a good idea. Sheet metal bends. The scissor jack that comes with the vehicle should have a slot that allows the weight to be next to the double weld, not under it.

@pobinr Жыл бұрын

What's the music for !

@witcherbelmont841 Жыл бұрын

How do you know what parts of the car are the frame?

@TURAMOTH 11 ай бұрын

Thanks mate

@JasonSmith-qx3zh 11 ай бұрын

Just what I was lookin for thanks a million to the point!

@aslonz5308 Жыл бұрын

0:25 NASA wants to know your location.

@williamrhyne2639 3 жыл бұрын

Thanks Dad

@Piano_Reimagined 4 жыл бұрын

I never trust those pinch welds. Once they rust, you’re fucked. I use the point where the control arms meet a cross member. Always works

@dennisprow7576 3 жыл бұрын

Unless you drive a Dosge Charger then you gotta buy extra crap

@anthonygamingpolitics5446 2 жыл бұрын

Geez who woulda thought gheballs yoo lol

@wadler1971 3 ай бұрын

I can understand using the manual . But the problem is my van is Japanese the manual is wrote in Japanese I can't read Japanese.

@s.a.mdaniels1545 3 жыл бұрын

THANK YOU

@InstantSleep 2 жыл бұрын

U done the bolts up wrong

@anocri Жыл бұрын

1:50, I don't have one.

@ezwa9979 2 жыл бұрын

1st competNt viDO on this Iv Cn, kUdOs chEf✋

@Antiorganizer Жыл бұрын

Piece of wood.... cccrraaacckkk oops.

@rkaag99 3 жыл бұрын

I liked the video, but I disagree with putting your feet under wheel. I'm mean, even if the odds are slim... what if?

@JulioLopez-xz5kx 3 жыл бұрын

SQUEAK!!!

@joe420blaze2 Жыл бұрын

This didn’t help at all I have a 2007 Subaru Impreza

@lesleyevans6691 3 жыл бұрын

Nope it doesn't .

@audreygullas8728 Жыл бұрын

Obviously I don't have a Manuel and your no help

@lvhao5105 11 ай бұрын

@user-nd8ms3jn4f Жыл бұрын

This is awful advice. The manual will only tell you 1 jack point.

@kellygroves5213 Жыл бұрын

Not helpful, and the slow mo talking made it stressful. 👍

@DANIEL_GARCIA. 3 жыл бұрын

Why would you say use your “head” was that really necessary, that gave you automatically a thumbs down 👎

@shadowgaming6660 2 жыл бұрын

Using your head to lift the car is very easy of done right

@mellowrockmusic 2 жыл бұрын

Just means taking another second to think about what you're doing

@slomo1716 Жыл бұрын

OMG - are you kidding me??? THIS IS THE WORST VIDEO WITH NO REAL INFORMATION!!! I grew up on a farm, changed many many tires, being an elderly woman and all I NEED TO KNOW IS WHERE I PLACE MY JACK TO RAISE THE CAR TO CHANGE A TIRE. Your explanation for locating the jack point was stooopid and RIDICULOUSLY UNINFORMATIVE!!! WHAT WE HAVE HERE IS A FAILURE TO COMMUNICATE!!!